I tried to calibrate temperature for abs, looked on maker lab for a temp tower and how to do it, i printed 2 times, failed. i look for other temp towers, while looking for others, when i tried to start the print with slot 1(from ams) it says "NOTE: Only the ams slots loaded with the same material type can be selected"
i tried to calibrate and recalibrate, nothing changes
PS: when i was writing this and trying to recreate, i opened a new bambulab studio and tried a stl from me(not from makerworld) and the only thig showed in the ams selection slot is ONLY ABS, (slot 1) and i have 2-3-4 full with pla
Go to preview, select the first filament type( if abs filament is select as the first slot, doesnt matter if the 2nd ,3th, 4th is pla, it will not show up and give an error. if i change the first filament to pla,, the other slots will be available to be selected.)
Bambu Studio Version
1.9.3.50
Where is the application from?
Bambu Lab Official website
OS version
Windows 11
Additional system information
Processor: AMD Ryzen 7 5800X 8-Core Processor (16 CPUs), ~3.8GHz Memory: 32768MB RAM Available OS Memory: 32668MB RAM Card name: NVIDIA GeForce RTX 4070
Printer
P1S
How to reproduce
I tried to calibrate temperature for abs, looked on maker lab for a temp tower and how to do it, i printed 2 times, failed. i look for other temp towers, while looking for others, when i tried to start the print with slot 1(from ams) it says "NOTE: Only the ams slots loaded with the same material type can be selected" i tried to calibrate and recalibrate, nothing changes PS: when i was writing this and trying to recreate, i opened a new bambulab studio and tried a stl from me(not from makerworld) and the only thig showed in the ams selection slot is ONLY ABS, (slot 1) and i have 2-3-4 full with pla
Actual results
Expected results
Let me select all the slots i want to print with
Project file & Debug log uploads
Iteratie (3).zip Temp_Tower_ABS_ASA (1).zip debug_Fri_Jul_05_23_25_29_23636.log.zip
Checklist of files to include