Open clstr opened 2 days ago
eolder
commented
2 days ago Seeing similar behavior. P1S running the latest firmware will not connect.
Unlike OP though, my dialog box says "Failed to connect to printer.":
Taking a look at Wireshark, I can see the printer responds with an ACK with the RST flag set to every packet BambuStudio sends. Perhaps this feature doesn't work on the release firmware yet and we need to wait for a printer update.
clstr
commented
2 days ago uvE
@?j
[1|
j(5o{"login":{"command":"login_report","reason":"{\"devmsg\":\"region or env unmatch\",\"err_code\":83968056}","sequence_id":1000,"session_id":-1,"status":"FAILURE"}}```vE4@oj
NOTIFY * HTTP/1.1
Host: 239.255.255.250:1990
Server: UPnP/1.0
Location: 172.16.0.106
NT: urn:bambulab-com:device:3dprinter:1
NTS: ssdp:alive
USN: 00M09A330500194
Cache-Control: max-age=1800
DevModel.bambu.com: BL-P001
DevName.bambu.com: 3DP-00M-194
DevSignal.bambu.com: -50
DevConnect.bambu.com: lan
DevBind.bambu.com: free
Devseclink.bambu.com: secure
DevInf.bambu.com: wlan0
DevVersion.bambu.com: 99.00.00.00In the meantime, I will continue to use my router to pass those packets across my subnets.
eolder
commented
1 day ago here is the packet capture from my previous comment https://github.com/bambulab/BambuStudio/issues/5006#issuecomment-2415213583
Hope this helps. p1s_01.06.01.02_bs_1.10.0.74_subnetbind_anon.pcapng.gz
Bambu Studio Version
1.10.0
Where is the application from?
Bambu Lab github releases
OS version
Manjaro (archlinux)
Additional system information
No response
Printer
X1C
How to reproduce
Device Tab Bind with access code type in ip address and accesscode
Actual results
Clicking Connect only yields the following error message:
Expected results
Bambu studio should have connected with the device. Computer with bambu studio is on a different subnet and the printer is also on a different subnet.
Printer is in LAN Mode.
Project file & Debug log uploads
N/A
Checklist of files to include