search

bambulab / BambuStudio

PC Software for BambuLab and other 3D printers
GNU Affero General Public License v3.0
2.12k stars 282 forks source link

VPN Issues sending print to X1C #557

Closed Benderrodrigu3z closed 2 years ago

Benderrodrigu3z commented 2 years ago

If my VPN is on, allow LAN Traffic is Checked, I can send stuff to any device on my network EXCEPT my X1C

When I turn off the VPN, I can send/upload the print and do everything like normal.

When the VPN is On: -I Can NOT upload/send -I can see time for complete -I can still stop the print -I can see video -I get on screen popups in BambuStudio for Filament errors as well

The VPN service is with Windscribe and im going from the US to Canada if you want to test this and my Mac settings are below: MacOS Catalina 10.15.7 2.6ghz Quad-Core Intel Core i7 16gb 1600mhz DDR3 12tb SSD storage

Benderrodrigu3z commented 2 years ago

It hangs at 30% for awhile then goes to this Screen Shot 2022-11-03 at 11 42 57 AM

lord-x-type commented 2 years ago

Had the same issue with VPN.. decided to route the traffic past the VPN over the default gateway of my network and it´s working for now. You are not sending the print file directly in the LAN.. you are sending it over a cloud service to the printer... this was my fault to... the cloud is sending it to the printer. Or am i wrong with this?

Benderrodrigu3z commented 2 years ago

I can send files to an Apple TV while on the vpn because Local Network Traffic is turned on, however I can't access the printer to send files, everything else works

Benderrodrigu3z commented 2 years ago

Hey they fixed it !