Closed jreising326 closed 1 year ago
I think I found a bug. Analyze Guitar Wiring is only reporting 4 of the 5 switch connections. I'm attaching screenshots of the Report as well as the Netlist. I also reversed the Bridge and Neck Pickup by swapping the Black and Red wires at the top, and then the Wiring Analysis reports correctly. I guess maybe there could be an issue in my diagram so also attaching the diy as a txt. firenza3.txt
The report is claiming that positions 4 and 5 are identical, that's why they are grouped together.
It's impossible for me to tell if it's right or wrong without spending a lot of time on analysis which may easily turn out to be a wiring mistake.
I suggest trying the following:
I did what you suggested and found the problem. Thanks for pointing out positions 4 and 5 were identical, I did not catch that. My hand written Netlist was off and a connection for position 4 was missing. What convinced me it was a bug was I had swapped the Neck and Bridge wires, and with the Bridge in the Neck position it "worked" as expected and showed all 5 of the expected connections. The source of that diagram is a hand written diagram posted on the Peavey Forum, and I had already found 1 error in the diagram thanks to your tool. I've now posted the corrected diagram there for reference so others don't end up rewiring their guitars as many times as I have done mine. :) Thanks once again and please close the ticket!
Cool!
Thank you for reporting issues and contributing ideas and features to DIYLC repository!
Before you proceed, please read the following:
.diylc/logs
directory. On Windows 7 and later, it's located inc:/Users/<your username>/.diylc/logs
. On Linux and MacOS, it's typically in/Users/<your username>/.diylc/logs
.