Aggregate move sometimes fails on 4.37 - Poss. related to #757?

[MarsManiac]

After upgrading to 4.37, (on MacOS Ventura 13.3,) there seems to be some new limits to moving a group of selected objects. In earlier versions I could select an entire drawing and move every object at one time, either with touchpad or arrow keys. Now certain groups of objects won't move together. For instance, I have a Fender LTP phase inverter stage that has to be moved in sections b/c it won't move as a unit. At the same time, the standard Fender Reverb circuit will move despite having more objects, and more types of objects, within the group I'm trying to move.

Not an emergency, I have a workaround that's good enough and I'm happy, but I saw #757 and decided to report also. I have no real evidence that would let you reproduce the effect. If I see anything more, I'll update this. Thanks!

[bancika]

Do you have a file that fails to move that I can use to debug?

On Sat, May 6, 2023 at 5:25 PM MarsManiac @.***> wrote:

After upgrading to 4.37, (on MacOS Ventura 13.3,) there seems to be some new limits to moving a group of selected objects. In earlier versions I could select an entire drawing and move every object at one time, either with touchpad or arrow keys. Now certain groups of objects won't move together. For instance, I have a Fender LTP phase inverter stage that has to be moved in sections b/c it won't move as a unit. At the same time, the standard Fender Reverb circuit will move despite having more objects, and more types of objects, within the group I'm trying to move.

Not an emergency, I have a workaround that's good enough and I'm happy, but I saw #757 https://github.com/bancika/diy-layout-creator/issues/757 and decided to report also. I have no real evidence that would let you reproduce the effect. If I see anything more, I'll update this. Thanks!

— Reply to this email directly, view it on GitHub https://github.com/bancika/diy-layout-creator/issues/774, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACXONCJFMDR5LYXGKONN323XEZUOPANCNFSM6AAAAAAXYF6BEE . You are receiving this because you are subscribed to this thread.Message ID: @.***>

-- Branislav Stojkovic www.diy-fever.com

[MarsManiac]

Here you go. I was just able to grab the entire first stage and move it. Then I grabbed the phase inverter stage and it wouldn’t move. Good hunting.



On May 6, 2023, at 11:35, Bane Stojkovic @.***> wrote:

Do you have a file that fails to move that I can use to debug?

On Sat, May 6, 2023 at 5:25 PM MarsManiac @.***> wrote:

After upgrading to 4.37, (on MacOS Ventura 13.3,) there seems to be some new limits to moving a group of selected objects. In earlier versions I could select an entire drawing and move every object at one time, either with touchpad or arrow keys. Now certain groups of objects won't move together. For instance, I have a Fender LTP phase inverter stage that has to be moved in sections b/c it won't move as a unit. At the same time, the standard Fender Reverb circuit will move despite having more objects, and more types of objects, within the group I'm trying to move.

Not an emergency, I have a workaround that's good enough and I'm happy, but I saw #757 https://github.com/bancika/diy-layout-creator/issues/757 and decided to report also. I have no real evidence that would let you reproduce the effect. If I see anything more, I'll update this. Thanks!

— Reply to this email directly, view it on GitHub https://github.com/bancika/diy-layout-creator/issues/774, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACXONCJFMDR5LYXGKONN323XEZUOPANCNFSM6AAAAAAXYF6BEE . You are receiving this because you are subscribed to this thread.Message ID: @.***>

-- Branislav Stojkovic www.diy-fever.com — Reply to this email directly, view it on GitHub https://github.com/bancika/diy-layout-creator/issues/774#issuecomment-1537166580, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOVDPBCXYQCPBIXPVKEQCMDXEZVV7ANCNFSM6AAAAAAXYF6BEE. You are receiving this because you authored the thread.

[bancika]

Didn't get the file. It doesn't work when attaching through an email. Can you please send directly to @.***?

On Sun, May 7, 2023, 00:22 MarsManiac @.***> wrote:

Here you go. I was just able to grab the entire first stage and move it. Then I grabbed the phase inverter stage and it wouldn’t move. Good hunting.



On May 6, 2023, at 11:35, Bane Stojkovic @.***> wrote:

Do you have a file that fails to move that I can use to debug?

On Sat, May 6, 2023 at 5:25 PM MarsManiac @.***> wrote:

After upgrading to 4.37, (on MacOS Ventura 13.3,) there seems to be some new limits to moving a group of selected objects. In earlier versions I could select an entire drawing and move every object at one time, either with touchpad or arrow keys. Now certain groups of objects won't move together. For instance, I have a Fender LTP phase inverter stage that has to be moved in sections b/c it won't move as a unit. At the same time, the standard Fender Reverb circuit will move despite having more objects, and more types of objects, within the group I'm trying to move.

Not an emergency, I have a workaround that's good enough and I'm happy, but I saw #757 <https://github.com/bancika/diy-layout-creator/issues/757

and decided to report also. I have no real evidence that would let you reproduce the effect. If I see anything more, I'll update this. Thanks!

— Reply to this email directly, view it on GitHub https://github.com/bancika/diy-layout-creator/issues/774, or unsubscribe < https://github.com/notifications/unsubscribe-auth/ACXONCJFMDR5LYXGKONN323XEZUOPANCNFSM6AAAAAAXYF6BEE

. You are receiving this because you are subscribed to this thread.Message ID: @.***>

-- Branislav Stojkovic www.diy-fever.com — Reply to this email directly, view it on GitHub < https://github.com/bancika/diy-layout-creator/issues/774#issuecomment-1537166580>, or unsubscribe < https://github.com/notifications/unsubscribe-auth/AOVDPBCXYQCPBIXPVKEQCMDXEZVV7ANCNFSM6AAAAAAXYF6BEE

. You are receiving this because you authored the thread.

— Reply to this email directly, view it on GitHub https://github.com/bancika/diy-layout-creator/issues/774#issuecomment-1537233819, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACXONCJD2O376CBEGOUJEGLXE3FL7ANCNFSM6AAAAAAXYF6BEE . You are receiving this because you commented.Message ID: @.***>

[MarsManiac]

Does this work? If not, please be more specific about how I should send it.

[MarsManiac]

Does this work? If not, please be more specific about how I should send it.

[MarsManiac]

If this isn’t right, please be more specific about how I should send it.

[bancika]

Still don't see it. There are two ways

1) send the file as an attachment directly to me to bancikaATgmailDOTcom 2) drop the file (with the extension changed to TXT) to this github issue page and NOT to your email attachment https://github.com/bancika/diy-layout-creator/issues/774

Thanks

[MarsManiac]

Weird. Okay, I’ve dropped the TXT version into #757. Thanks for looking into this, but again, it’s not urgent to me.

On May 7, 2023, at 10:31, Bane Stojkovic @.***> wrote:

Still don't see it. There are two ways

send the file as an attachment directly to me to bancikaATgmailDOTcom drop the file (with the extension changed to TXT) to this github issue page and NOT to your email attachment #774 https://github.com/bancika/diy-layout-creator/issues/774 Thanks

— Reply to this email directly, view it on GitHub https://github.com/bancika/diy-layout-creator/issues/774#issuecomment-1537455767, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOVDPBGK3RGNAYCRSYJQ3YDXE6W33ANCNFSM6AAAAAAXYF6BEE. You are receiving this because you authored the thread.

[bancika]

Still nothing. As long as you are replying to this email thread with at attachment it won't work.

[MarsManiac]

Marshall_18W_v2.txt

[MarsManiac]

Okay, please check again. I did a straight copy and paste into the comments section of 774. I can see the TXT file name there.

On May 7, 2023, at 10:45, Bane Stojkovic @.***> wrote:

Still nothing. As long as you are replying to this email thread with at attachment it won't work.

— Reply to this email directly, view it on GitHub https://github.com/bancika/diy-layout-creator/issues/774#issuecomment-1537458741, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOVDPBBA5US7D7NNGXQWH3DXE6YPVANCNFSM6AAAAAAXYF6BEE. You are receiving this because you authored the thread.

[bancika]

It's only the filename, but not the actual file. Copy-paste doesn't work, the file needs to be dropped to the github page

Thank you for the patience :)

[MarsManiac]

Yes, that zero-length line was the culprit. All well now. Thanks again.

[bancika]

Fixed for 4.38