The Tactile micro-switch does not fit nicely on the veroboard/stripboard. The pins do not line up with the holes - both horizontally and vertically.
The top left pin seems to align with a hole
The bottom row seems to be (maybe) a quarter of a strip width too high
The right hand side pins seem to be just left of the hole, maybe a quarter on the hole spacing too short
Size issue
In addition, while the height of the switch seems to be correct (3 rows stripboard high), the physical Omron tactile switches that I have, B3F-4055 (i.e. the 12x12 mm type), are 6 holes across in width, not the 4 holes width that the application provides, for B3F-1104 (i.e. the 6 x 6 mm type).
Admittedly, Omron switches come in different sizes, but there doesn't seem to be a resize mechanism for the tactile micro-switch, like there is for the ICs. Either that, or an additional variant is required.
This would seem to be two separate issues, and if so, maybe one of the issues should be moved into a distinct Github issue?
Version 4.37
Placement issue
The Tactile micro-switch does not fit nicely on the veroboard/stripboard. The pins do not line up with the holes - both horizontally and vertically.
Size issue
In addition, while the height of the switch seems to be correct (3 rows stripboard high), the physical Omron tactile switches that I have, B3F-4055 (i.e. the 12x12 mm type), are 6 holes across in width, not the 4 holes width that the application provides, for B3F-1104 (i.e. the 6 x 6 mm type).
Admittedly, Omron switches come in different sizes, but there doesn't seem to be a resize mechanism for the tactile micro-switch, like there is for the ICs. Either that, or an additional variant is required.
This would seem to be two separate issues, and if so, maybe one of the issues should be moved into a distinct Github issue?