bancika
commented
5 months ago I used drawing diagram of an actual jack in order of it to be as close as possible to the real world. You can change grid size to 1mm to have tighter grid.
On Tue, Nov 7, 2023, 14:38 Chris Jones @.***> wrote:
As the title states, the stereo 1/8 open jack ring terminal connection is not placed on a grid intersection which means switching off snap-to-grid in order to make a connection. This is just an inconvenience really, as there is a work-around.
The 1/4 jack is fine.
I'm running V4.37 on OSX (although I doubt that matters in this case) and can confirm it was the same on V4.36
— Reply to this email directly, view it on GitHub https://github.com/bancika/diy-layout-creator/issues/801, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACXONCMBNG7C7463XWFMSWLYDI2UDAVCNFSM6AAAAAA7BGSFAKVHI2DSMVQWIX3LMV43ASLTON2WKOZRHE4DCMZYGQ4DOMY . You are receiving this because you are subscribed to this thread.Message ID: @.***>
As the title states, the stereo 1/8 open jack ring terminal connection is not placed on a grid intersection which means switching off snap-to-grid in order to make a connection. This is just an inconvenience really, as there is a work-around.
The 1/4 jack is fine.
I'm running V4.37 on OSX (although I doubt that matters in this case) and can confirm it was the same on V4.36