Open stillampd opened 3 months ago
double click on a capacitor on the drawing, not in the menu
On Tue, Jan 9, 2024 at 12:14 AM stillampd @.***> wrote:
Using V4.37 In Passive/Electrolytic Caps (radial) mine does not show "folded caps" mine shows "no variants" How do I get the folded caps? No.Folded.Caps.png (view on web) https://github.com/bancika/diy-layout-creator/assets/156031004/77bc1171-a8b1-4b4b-acbb-69ff5218ac0c
— Reply to this email directly, view it on GitHub https://github.com/bancika/diy-layout-creator/issues/807, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACXONCOAKVCXLD3REUJVUWLYNR4UTAVCNFSM6AAAAABBSGPPJ2VHI2DSMVQWIX3LMV43ASLTON2WKOZSGA3TCMZXGI4TINI . You are receiving this because you are subscribed to this thread.Message ID: @.***>
-- Branislav Stojkovic www.diy-fever.com
Here is what others are getting. I do not see this in mine. Same version. They do not know how, suggested I go to this forum for advice.
What I want to do is get a radial cap on its side
Hi,
I don't have the option variant option either:
However, if you double click on the component you can open a menu where you can select the folded look:
^ Double Click
^ Select the box
^ Folded cap.
Using V4.37 In Passive/Electrolytic Caps (radial) mine does not show "folded caps" mine shows "no variants" How do I get the folded caps?