Closed GoogleCodeExporter closed 9 years ago
Original comment by gru...@gmail.com
on 2 Jul 2011 at 3:16
I note that the channel order is in fact stored in general settings, so I'll
move it to there instead. Ideally though, each model should be able to have a
different wiring scheme ... but this will do for now.
Original comment by gru...@gmail.com
on 2 Jul 2011 at 3:22
r656 -- Channel Order moved from TEMPLATE to RADIO SETUP. Tested OK.
Original comment by gru...@gmail.com
on 2 Jul 2011 at 4:04
Ah .. I see now that the display order is changed, according to stick mode. SO
that is OK, but the output channel assignments are always 1,2,3,4 instead or
changing according to g_eeGeneral.templateSetup.
Original comment by gru...@gmail.com
on 2 Jul 2011 at 4:40
OK -- I'm a dummy. It was working correctly all the time. Sheesh.
But I find it confusing as all heck having the channels display in an order
other than how my receivers are set up, so I went and fixed that -- at the cost
of some arguably unnecessary extra flash bytes.
Original comment by gru...@gmail.com
on 2 Jul 2011 at 6:04
So, in the end, I ended up with exactly what I originally set out to do. Please
excuse the confusion along the way in comments 3 through 5.
Original comment by gru...@gmail.com
on 2 Jul 2011 at 6:10
Original comment by gru...@gmail.com
on 23 Sep 2011 at 1:52
Original issue reported on code.google.com by
gru...@gmail.com
on 2 Jul 2011 at 3:14