Closed GoogleCodeExporter closed 8 years ago
did you try to apply any signal to the ADC0 on te arduino? Otherwise the
arduino is there waiting and waiting...
Original comment by aguav...@gmail.com
on 7 Nov 2010 at 2:03
Yes, I connect pin AREF(5V) to pin ANALOG IN 0. Then I connected the probes to
ANALOG IN 1 and GND.
I have just tried it again with no success.
Original comment by pedro.sa...@gmail.com
on 7 Nov 2010 at 11:06
Can you try to connect with a terminal program, then send this character '?',
the arduino should reply with "OC" and some other data which doesnt matter
right now, the important thing is to test whether you can talk successfully
with the arduino
Original comment by aguav...@gmail.com
on 10 Nov 2010 at 2:29
Pedro another user has a similar issue and confirmed the issue was that no
signal was applied to ADC0, could you please retest?
Thanks!
Original comment by aguav...@gmail.com
on 14 Nov 2010 at 5:23
I have the same problem. Xoscillo.exe crash and not respond (i can't
close)after detect the new arduino.
i open a console and send '?'comand and respond '0C.....'
Original comment by arielbar...@gmail.com
on 12 Mar 2011 at 11:23
Arielbar,
is the arduino being detected properly?
Are you applying some signal to the adc0 pin in the arduino?
Thanks
Original comment by aguav...@gmail.com
on 13 Mar 2011 at 3:33
Thanks for you reply
yes, detect properly.
I apply square wave of 0-5v 1khz and other signals.
Original comment by arielbar...@gmail.com
on 13 Mar 2011 at 11:23
Hello together,
I have loaded the pde on my arduino, it has been recognized by the exe file but
it didn/t work under xp.
I dont know, what shall I do now.
Has anybody some Ideas?
Original comment by willi.pe...@gmx.de
on 29 Mar 2011 at 9:50
i have this problem too, I click "new arduino" and the graph doesnt apear.
Original comment by estepa...@gmail.com
on 6 Apr 2011 at 4:32
The PDE compiled perfectly and succesfully uploaded into the Arduino.
When I fire up the program in Windows 7, O get
COM6. rts:False, dtr:False trying pinging Found!
I assume that means the software has found the Arduino. However, I dont get a
graph or any movement when hooking up to a GPS chip's TX and GND line. Nothing
showing. Any ideas?
Thanks! This is a really cool idea!!
Original comment by dxtrindu...@gmail.com
on 28 Apr 2011 at 8:09
Hey guys. I have the same prolem, also the .exe throws me a lot of crash errors
on the buttons. On win7 an XP. I have no readings... Can anybody do some
youtube tutorial or something.. Greatings
Original comment by mariolop...@gmail.com
on 21 Aug 2011 at 10:51
I had the same issue, I downloaded the source and flashed the .pde found there
and that worked for me.
Original comment by DanielLe...@gmail.com
on 13 Sep 2011 at 6:03
Original comment by aguav...@gmail.com
on 8 Feb 2013 at 12:34
Original issue reported on code.google.com by
pedro.sa...@gmail.com
on 3 Nov 2010 at 10:45