Throttle & Elevator Trims values show reversed on Transmitter once loaded from eepe

[GoogleCodeExporter]

What steps will reproduce the problem?
1.Add Trim value to Elevator in eepe
2.Load to transmitter 
3.Elevator trim value appears on the Throttle channel

What is the expected output? What do you see instead?
Should see trim value on the Elevator not the Throttle

What version of the product are you using? On what operating system?

Please provide any additional information below.

Original issue reported on code.google.com by iana...@hotmail.com on 13 Jul 2011 at 7:14

[GoogleCodeExporter]

hi I woud like to confirm this defect.
the Elevator trim and Throttle trim values are switched betwen er9x and eePe 
after Write or Read Transmitter EEPROM

I use eePe r262, with stick mode 4, channel order ATER.
on er9x I use also mode4

Original comment by gbir...@gmail.com on 2 Aug 2011 at 7:55

[GoogleCodeExporter]

Dear eepe team,
Now we are on eepe r265 and er9x r445, and there is stil switched elevator and 
throttle trim values when you load configuration between eepe and er9x.
I try to troubleshoot and my finding is that this defect doesn't depend on 
stick mode.
They are always switched between er9x and eepe. Its confusing when you use 
ThrottleTrim with trim value -125. In Eepe then you have trimmed the Elevator.

Please fix this issue.
thanks.

Original comment by gbir...@gmail.com on 23 Aug 2011 at 8:05

[GoogleCodeExporter]

Related to issue 110

Solved by release 285

Original comment by romolo.m...@gmail.com on 5 Nov 2011 at 2:14