search

basilyohannan / sf9domahrs

Automatically exported from code.google.com/p/sf9domahrs
0 stars 0 forks source link

problem comunication. #6

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago 
What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?

What version of the product are you using? On what operating system?

Please provide any additional information below.

Original issue reported on code.google.com by giv...@gmail.com on 20 Jun 2010 at 2:26

GoogleCodeExporter commented 8 years ago 
hi
I´m new here,
I had buy the 9 Degrees of Freedom - Razor IMU - AHRS compatible and the 
Breakout Board for FT232RL USB to Serial to can conet with the compiuter.

that was the firs that i made, conec the 2 board and then with the compiuter, 
the next that i made was open the terminal V1.9 to see the results.
Baud rate=38400
data bit=8
parity=none
sotp bit=1
handshaking = none

I couldn´t see anything. it`s like anithing were conected, even on the 
Breakout Board the Tx and Rx leds was switch off (the conetion beteen the 2 
board is right)

Could you tell me if I´m doing anithing wrong??
Thank you

Original comment by giv...@gmail.com on 20 Jun 2010 at 2:34

GoogleCodeExporter commented 8 years ago 
hi，all:
      I had bought the 9 Degrees of Freedom-Razor IMU-AHRS(ITG-3200,HMC5843,ADXL345) and FTDI Basic(Arduino Compatible).
      My operating system: window xp sp3.
      My questions:
               1,Whether SF9DOF_AHRS_1_1 is suitable for my board? if not,is there any other interchangeble one that works well on my board?
               2,What kind of coordinate system did you use in the SF9DOF_AHRS_1_1?

Original comment by 168liuyu...@gmail.com on 12 Jul 2011 at 8:35