search

bassamanator / Sovol-SV06-firmware

🔥 A comprehensive Klipper configuration for a variety of 3D printers 🔥
GNU Affero General Public License v3.0
854 stars 75 forks source link

Flashing the firmware seems not to work with sv06+ #115

Closed minaf1 closed 9 months ago

minaf1 commented 9 months ago

Hello @bassamanator.

I am new to this 3d printing craze, and trying to install klipper on my sv06+ printer. I tried to follow your readme on the sv06+ branch. I believe i've gotten the same error you mentioned saying, "Many users have reported having issues flashing Klipper using the Sovol microSD card". What I've done is reformat the sd card and copy/paste your bin file (by itself) in the card. I tried this using sovol's sd card as well as my own separate 32gb sd card. In both cases the printer ends up freezing as in the screen doesn't start up (I can share a picture if it would help). Is there a solution known for this? or sd cards that should work with this printer (preferably with klipper)?

bassamanator commented 9 months ago

Unfortunately, according to Sovol3d official, you cannot use a card that is larger than 16GB (see the video in that section). So your card should not work because it's 32GB, and their card doesn't work for many users and you might be one of these users.

I don't think you've read all the documentation as is required to make this whole thing happen. I say that because it's actually not possible to tell at that point in the readme if your flash was successful.