search

batocera-linux / batocera.linux

batocera.linux
https://batocera.org
Other
1.96k stars 511 forks source link

Using multiple (2) SN30 pro controllers fails #11844

Open olind opened 4 months ago

olind commented 4 months ago

Batocera build version

39-o2024/03/01 05:31

Your architecture

Raspberry Pi 3b+

Your Graphic Processor Unit(s) (GPU)

Integrated

Issue description

I cannot add two 8BitDo SN30 pro controllers at the same time. The mapping fails. I believe Batocera mixes them up but I'm not sure.

Detailed reproduction steps

Try to pair two identical SN30 pro controllers

Details of any attempts to fix this yourself

No response

Details of any modifications you have made to Batocera.

None

Logs and data

No response

joinski1 commented 4 months ago

@olind Which modes (d-input, x-input, switch) did you try on the SN30 pro controllers? Firmware on both controllers are up to date?

olind commented 4 months ago

I just checked and I use the latest firmware on both.

I start the controllers with b+start. The guide says android mode. When I paired them I tried the different modes and that was what worked best.

olind commented 1 week ago

I have managed to connect my 3 8bit do controllers via this guide: https://wiki.batocera.org/bluetooth_controllers_-_manual_setup (manually via the terminal now)

i5rael-lp commented 1 week ago

I have managed to connect my 3 8bit do controllers via this guide: https://wiki.batocera.org/bluetooth_controllers_-_manual_setup (manually via the terminal now)

Hi! Did it work? Are you on v40 now?

olind commented 1 week ago

No, I downgraded to v39, where it actually works with dual controllers if I connect-pair-trust them via the terminal and not the gui.

Really impressed that a downgrade worked so well.