Open char32 opened 3 months ago
@jdorigao are you aware?
@dmanlfc I don't have rk3566 equipment.
confirmed, investigating...
confirmed, investigating...
This is a duplicate of #11102... @dmanlfc if theres anything you'd like me to test or whatever let me know.
confirmed, investigating...
@dmanlfc I just updated from the v40 6/12 release to the current 8/11 release on the rg353v2. Only some buttons were registering. I plugged in a keyboard to remap the controls... R1,R2,R3 all do not register at all and surprisingly, the "f" button started working. I tried using the rg353v2dtb file from the 6/12 release and the controls wouldnt register at all. I backed out to the 6/12 release for now . Let me know if theres anything I can help with
Batocera build version
39 2024/02/29 09:19
Your architecture
Anbernic RG503 (RK3566) / aarch64 / anbernic-rgxx3
Your Graphic Processor Unit(s) (GPU)
Mali-G52r1 (panfrost)
Issue description
When I try to shutdown/halt the system by selecting Start -> Quit -> confirm, the display turns off but the system keeps running. The green status LED is still visible. I have to press the power button for a couple of seconds to fully turn off the device.
Detailed reproduction steps
Select Start -> Quit -> confirm.
Details of any attempts to fix this yourself
none yet
Details of any modifications you have made to Batocera.
none
Logs and data
No response