TP Link USB WiFi adapter (TL-WN725N) stopped working after update from v35 to v40 on PowKiddy A13

[deionut]

Batocera build version

40

Your architecture

PowKiddy A13

Your Graphic Processor Unit(s) (GPU)

Mali

Issue description

USB WiFi adapter stopped working after update from v35 to v40

Detailed reproduction steps

I have a TP Link USB WiFi adapter (TL-WN725N) connected to my Powkiddy A13 running Batocera v35 (2022/09/11) and working fine. I updated to v40 from the main menu on the device. After the update to v40 ( 2024/08/09 ) wifi stopped working. Everything else works ok after the update.

Details of any attempts to fix this yourself

The work-around is to use a USB ethernet adapter which works with v40.

Details of any modifications you have made to Batocera.

I updated from v35 to v40

Logs and data

No response

[dmanlfc]

Logs... as per the issues template...

[deionut]

Tell me what log files should I upload

[Tovarichtch]

https://wiki.batocera.org/troubleshooting#create_a_batocera_support_file

[deionut]

Here is the support file batocera-support-19800101000230.tar.gz

[dmanlfc]

try this, create a file called r8188eu.conf and in the file type blacklist r8188eu. save it to /etc/modprobe.d on the powkiddy. then batocera-save-overlay finally reboot.

[deionut]

Thanks for the reply; I followed your instructions but unfortunately it still doesn't work; I created another support file (attached). I noticed when there is no internet connection the name of the support file starts with 1980, when I connect the ethernet adapter the support file starts with 2024; The time displayed on the Powkiddy's screen is the correct time (hh:mm) even when the USB wifi is attached. batocera-support-19800101010147.tar.gz

[dmanlfc]

try to change it to blacklist rtl8188eu, save the overlay & reboot.

[deionut]

still doesn't work; another support file batocera-support-19800101010439.tar.gz

[dmanlfc]

try this v41 build... https://drive.google.com/drive/folders/13qmDjK2Ug30eL8tAoWkNHDiWfFRQRzMP?usp=sharing

[deionut]

I copied boot.tar.xz and boot.tar.xz.md5 to \batocera\share\system\upgrade I then rebooted; however after the reboot the version displayed is still the old one; the contents of the upgrade directory on board have not changed; Putty SSH output:

Model: Game_Simulator_Board System: Linux 4.4.194 Architecture: armv7l Board: powkiddy_a13 CPU Model: ARMv7 Processor rev 5 (v7l) CPU Cores: 4 CPU Max Frequency: 1008 MHz Temperature: 48°C Available Memory: 63/229 MB Display Resolution: 1024x600 Display Refresh Rate: 86Hz Data Partition Format: ext4 Data Partition Available Space: 102G Network IP Address: 192.168.0.20 OS version: 40o 2024/08/09 16:05

[root@BATOCERA /userdata/system]# cd upgrade/ [root@BATOCERA /userdata/system/upgrade]# ls boot.tar.xz boot.tar.xz.md5 [root@BATOCERA /userdata/system/upgrade]# reboot

From Powkiddy: going to menu->System settings->Information the version displayed is 40o 2024/08/09, so the update didn't seem to have taken place. The wifi USB adapter is not working.

[dmanlfc]

Read the readme...

[apison]

Bye, I dont have the same wifi adapter but it used to work till 39 version, since 40 it stopped to work and it doesnt work in 41 beta too.

[deionut]

Looks like I bricked it, this is what I done:

Model: Game_Simulator_Board System: Linux 4.4.194 Architecture: armv7l Board: powkiddy_a13 CPU Model: ARMv7 Processor rev 5 (v7l) CPU Cores: 4 CPU Max Frequency: 1008 MHz Temperature: 48°C Available Memory: 66/229 MB Display Resolution: 1024x600 Display Refresh Rate: 86Hz Data Partition Format: ext4 Data Partition Available Space: 102G Network IP Address: 192.168.0.20 OS version: 40o 2024/08/09 16:05

[root@BATOCERA /userdata/system]# cd /userdata/system/upgrade [root@BATOCERA /userdata/system/upgrade]# ls batocera.version boot.tar.xz boot.tar.xz.md5 [root@BATOCERA /userdata/system/upgrade]# batocera-upgrade manual Starting the upgrade... Using local file: /userdata/system/upgrade/boot.tar.xz (1347MB) Checksum validated ... remounting /boot in rw Backing up config files ... Extracting files ... batocera-boot.conf boot/ boot/initrd.lz4 boot/rk3128-powkiddy-a13-rev-ab.dtb boot/rk3128-powkiddy-a12-rev-d.dtb boot/batocera.board boot/batocera.update boot/rk3128-powkiddy-a12-rev-c.dtb boot/linux extlinux/ extlinux/extlinux.conf tools/ tools/btrfs_on_windows/ tools/btrfs_on_windows/readme.txt tools/btrfs_on_windows/btrfs.cat tools/btrfs_on_windows/amd64/ tools/btrfs_on_windows/amd64/btrfs.sys tools/btrfs_on_windows/amd64/mkbtrfs.exe tools/btrfs_on_windows/amd64/ubtrfs.dll tools/btrfs_on_windows/amd64/shellbtrfs.dll tools/btrfs_on_windows/btrfs.inf tools/btrfs_on_windows/x86/ tools/btrfs_on_windows/x86/btrfs.sys tools/btrfs_on_windows/x86/mkbtrfs.exe tools/btrfs_on_windows/x86/ubtrfs.dll tools/btrfs_on_windows/x86/shellbtrfs.dll Restoring config files ... Doing final cleanups ... removed downloaded files, sync disk now

Done. Please reboot the system so that the changes take effect! [root@BATOCERA /userdata/system/upgrade]# reboot [root@BATOCERA /userdata/system/upgrade]#

Powkiddy won't boot now, even if I switch it on from the power button, I will flash again the SD card with the original version batocera-rk3128-powkiddy_a13-35-20220911.img.gz and hopefully it will boot

[deionut]

I booted again to v35 and upgraded from the Batocera menu to v40 ( 2024/08/09 ). The same, WiFi worked with v35 but not with v40

[apison]

Using wpa_supplicant forcing ssid and password i get ipaddress but network doesnt work.