search

batocera-linux / batocera.linux

batocera.linux
https://batocera.org
Other
1.98k stars 513 forks source link

Another no audio through HDMI issue #7103

Closed ToontjeM closed 9 months ago

ToontjeM commented 2 years ago

v35 native on an Intel NUC10i7FNK1 (https://ark.intel.com/content/www/us/en/ark/products/188808/intel-nuc-10-performance-kit-nuc10i7fnk.html?wapkw=nuc10i7fnk) connected to TV. Tried several HDMI cables. Audio through front panel jack is working fine if selected in Batocera.

[root@batocera /userdata/system]# batocera-audio list
auto auto
alsa_output.pci-0000_00_1f.3.hdmi-stereo Built-in Audio Digital Stereo (HDMI)
[root@batocera /userdata/system]# batocera-audio list-profiles
auto auto
output:hdmi-stereo+input:analog-stereo@alsa_card.pci-0000_00_1f.3 HDA Intel PCH Digital Stereo (HDMI) Output + Analog Stereo Input
output:hdmi-stereo@alsa_card.pci-0000_00_1f.3 HDA Intel PCH Digital Stereo (HDMI) Output
output:hdmi-surround+input:analog-stereo@alsa_card.pci-0000_00_1f.3 HDA Intel PCH Digital Surround 5.1 (HDMI) Output + Analog Stereo Input
output:hdmi-surround@alsa_card.pci-0000_00_1f.3 HDA Intel PCH Digital Surround 5.1 (HDMI) Output
pro-audio@alsa_card.pci-0000_00_1f.3 HDA Intel PCH Pro Audio
[root@batocera /userdata/system]# cat batocera.conf
display.brightness=100
audio.volume=100
system.cpu.governor=performance
system.timezone=Europe/Madrid
audio.device=auto
updates.type=stable
updates.enabled=1
wifi.enabled=0
splash.screen.enabled=1
splash.screen.sound=1

What else do you need to troubleshoot?

ToontjeM commented 2 years ago

After a factory reset my batocera.conf looks like this:

# ------------ A - System Options ----------- #

## Security
## Enable this to enforce security, requiring a password to access the network share.
#system.security.enabled=0

## Display rotation
## Leave commented out -> Auto.
## 0 -> No rotation.
## 1 -> Rotate 90 degrees clockwise.
## 2 -> Rotate 160 degrees clockwise.
## 3 -> Rotate 270 degrees clockwise.
#display.rotate=0

## Power button behavior
## Change what the power button does when pressed.
## shutdown -> Immediately shutdown the system.
## suspend -> Enter low-power standby mode.
## hybrid -> Enter an even lower-power standy mode, only available on supported devices.
#system.suspendmode=suspend

## File system compression (btrfs only)
## Natively compresses files as they are stored, reduces disk write speed but increases space available.
#system.fscompression.enabled=0

## Send the CEC standby command to the first video output device during shutdown.
#system.cec.standby=1

## EmulationStation menu style
## default -> default all options menu
## none -> no menu except the game search menu
## bartop -> less menu, only needed for bartops
#system.es.menu=default

## Show or hide Kodi in the EmulationStation menu.
kodi.enabled=1
## Start Kodi at launch.
kodi.atstartup=0
## Enable the North button Kodi shortcut.
kodi.xbutton=1

## Kodi networking delay
## Kodi can be instructed to wait for a network host to become available before starting.
## All three upcoming keys must be completed in order for the wait to take effect.

## waithost decides which host name to ping while waiting to start.
#kodi.network.waithost=192.168.0.50

## waittime decides how long to wait up to in seconds.
#kodi.network.waittime=10

## waitmode decides how dependent Kodi is on the specified host.
## noping -> Do not ping. Start Kodi immediately. This is the default.
## required -> Wait up to the specified time for the host to respond. Start Kodi only if the host responds.
## wish -> Wait up to the specified time for the host to respond. Start Kodi if the host responds or the waittime is reached.
#kodi.network.waitmode=required

## Splash screen
## Set sound option to 0 to silence the video splash
#splash.screen.enabled=1
#splash.screen.sound=1

# ------------ A1 - Platform Specific Options ----------- #

## Raspberry Pi 1/2/3/4 system power switch/utility
## Select one option. See https://wiki.batocera.org/add_powerdevices_rpi_only
## ARGONONE ->           Activate fan control for Argon One case (RPi4)
## ATX_RASPI_R2_6 ->     http://lowpowerlab.com/atxraspi/#installation
## MAUSBERRY ->          http://mausberry-circuits.myshopify.com/pages/setup
## ONOFFSHIM ->          https://shop.pimoroni.com/products/onoff-shim
## POWERHAT ->           https://www.raspberrypiplastics.com/power-hat-board
## REMOTEPIBOARD_2003 -> http://www.msldigital.com/pages/support-for-remotepi-board-2013
## REMOTEPIBOARD_2005 -> http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015
## KINTARO ->            http://www.kintaro.co SNES style case aka Roshambo/Super Kintaro Kuma System
## RETROFLAG ->          http://www.retroflag.com  -- note: enable UART in config.txt for LED action
## RETROFLAG_ADV ->      Activate on RESET button more commands to quit emulators or restart ES
## RETROFLAG_GPI ->      Activate GPi CASE SAFE SHUTDOWN functions.
## PIBOY ->              Activate PIBOY.
## DESKPIPRO ->          Fan & power control for RPi4 DeskPi Pro case.
## PISTATION_LCD ->      Config.txt tweaks to get the display to work.
## Simple Switches without active devices
## See https://wiki.batocera.org/add_powerdevices_rpi_only#simple_push-button_or_switches
## PIN56ONOFF ->         For latching switches
## PIN56PUSH ->          For momentary buttons
## PIN356ONOFFRESET ->   Restart and shutdown board. Needs 2 switches.
#system.power.switch=RETROFLAG

## Rockpro64
## Roshambo/Kintaro case.
#roshambo.enabled=1

# ------------ B - Network ------------ #

## Set system hostname, accessible via network share.
system.hostname=BATOCERA
## Wi-Fi country code (00 for World), see https://wiki.batocera.org/wifi_ssid#i_can_t_see_my_ssid_in_the_list_but_i_can_see_my_neighbor_s
#wifi.country=FR
## Activate Wi-Fi (0,1)
wifi.enabled=0
## Wi-Fi SSID (string)
#wifi.ssid=new ssid
## Wi-Fi KEY (string)
## Escape your special chars (# ; $) with a backslash. eg. $ becomes \$
#wifi.key=new key

## Secondary Wi-Fi (not configurable via the user interface)
#wifi2.ssid=new ssid
#wifi2.key=new key

## Third Wi-Fi (not configurable via the user interface)
#wifi3.ssid=new ssid
#wifi3.key=new key

## Add values here to connect to a hidden AP.
#wifi.hidden.ssid=hidden SSID
#wifi.hidden.key=new key

## Disable Samba share, see https://wiki.batocera.org/add_games_bios#while_batocera_is_running
#system.samba.enabled=0

## Disable SSH, see https://wiki.batocera.org/access_the_batocera_via_ssh
#system.ssh.enabled=0

# ------------ C - Audio ------------ #

## Set the audio device
## Use "batocera-audio list" to see available devices.
audio.device=alsa_output.pci-0000_00_1f.3.hdmi-stereo
## Set system volume (0-100)
audio.volume=90
## Set max volume for boost sound (100-150)
audio.volume.boost=100
## Enable or disable system sounds in ES (0,1)
audio.bgmusic=1

# -------------- D - Controllers ----------------- #

## Enable Bluetooth
controllers.bluetooth.enabled=1

## Bluetooth Debug
## Enables extra Bluetooth logging for developers.
#controllers.bluetooth.debug=1

# -------------- D1 - PS3 Controllers ------------ #

## Enable PS3 controller support
controllers.ps3.enabled=1
## Choose a Bluetooth driver.
## bluez -> bluez 5 + kernel drivers, supports official and Shanwan Sixaxis.
## official -> sixad drivers, supports official and Gasia Sixaxis.
## shanwan -> shanwan drivers, supports official and Shanwan Sixaxis.
controllers.ps3.driver=bluez

# ------------ D2 - Other Controllers ------------ #

## XGaming's XArcade Tankstik and other compatible devices.
controllers.xarcade.enabled=1

# ------------ D3 - GPIO Controllers (RPi only) ------------ #

## GPIO Controllers
## Enable controllers on GPIO with mk_arcarde_joystick_rpi.
controllers.gpio.enabled=0
## GPIO arguments
## map=1 -> For one controller.
## map=1,2 -> For two controllers.
controllers.gpio.args=map=1,2

## DB9 Controllers
## Enable DB9 drivers for Atari, Megadrive and Amiga controllers.
controllers.db9.enabled=0
## DB9 arguments
controllers.db9.args=map=1

## Gamecon controllers
## Enable Gamecon controllers, for NES, SNES and PSX controllers.
controllers.gamecon.enabled=0
## Gamecon arguments
controllers.gamecon.args=map=1

# ------------ F - Language and Keyboard ------------ #

## System language
## Some common examples:
## en_US -> English
## en_GB -> English (UK)
## fr_FR -> French
## de_DE -> German
## pt_BR -> Brazillian Portuguese
## it_IT -> Italian
## tr_TR -> Turkish
## zh_CN -> Chinese
## Check the menu in ES for more.
#system.language=en_US

## Set the keyboard layout (fr,de,us,es).
## To view all available layouts, run: ls /usr/share/keymaps/
#system.kblayout=us
## Set the local time zone
## To view all available time zones, run: ls /usr/share/zoneinfo/
system.timezone=Europe/Madrid

# ------------ G - Updates ------------ #

## Automatically check for updates after booting.
updates.enabled=1
## Set the update type.
## stable -> Current stable version
## beta -> Current development verion, use at your own risk
updates.type=stable

# ------------ H - Global Emulator Configuration ------------ #

## The global value will be used for all emulators, except if the value is redefined in the emulator

## Video mode
## Force the emulator to run at this resolution. To check available resolutions, run: batocera-resolution listModes
## See https://wiki.batocera.org/display_issues
#global.videomode=CEA 4 HDMI

## Set the preferred output
## To check available outputs, run: batocera-resolution listOutputs

## DPI
## If the text is too small, adjust this value.
#global.dpi=96

## Shader set
## Automatically select shaders for all systems, see https://wiki.batocera.org/emulationstation:shaders_set
## default -> Default shader
## none -> No shader
## curvature -> Realistic CRT curve with scanlines, CPU expensive
## enhanced -> Upscale pixel graphics
## flatten-glow -> Make the image glow
## mega-bezel -> Add reflections to shader bezel, CPU expensive
## retro -> Pixelated shader
## scanlines -> Add scanlines to the image
## zfast -> Cheaper version for scanlines
#global.shaderset=none

## Integer scaling (pixel perfect)
## Only scale the image in integers, maintaining pixel ratio.
#global.integerscale=0

## Decoration set
## See https://wiki.batocera.org/decoration
#global.bezel=default

## Game aspect ratio
## Set the ratio for emulators.
#global.ratio=auto

## Smooth games (bilinear filtering)
## Softens the image. Is overidden if using a shader set.
#global.smooth=1

## Rewind
## Very CPU and RAM expensive for some emulators. Take care with enabling this globally.
#global.rewind=1

## Auto save/load
## Automatically save state when exiting emulators. Automatically load latest savestate when launching emulators.
#global.autosave=0

## Incremental savestates
#global.incrementalsavestates=0

## Retroachievement settings
## Set up your www.retroachievements.org username/password first
## Escape your special chars (# ; $) with a backslash. eg. $ becomes \$
#global.retroachievements=0
#global.retroachievements.hardcore=0
#global.retroachievements.leaderboards=0
#global.retroachievements.verbose=0
#global.retroachievements.screenshot=0
#global.retroachievements.challenge_indicators=0
#global.retroachievements.username=
#global.retroachievements.password=
#global.retroachievements.sound=

## Enable RetroArch AI game translation service
#global.ai_service_enabled=0
#global.ai_service_url=http://ztranslate.net/service?api_key=BATOCERA
#global.ai_target_lang=

## HUD (x86 or RPi4 only)
## game -> Show game's boxart/metadata info
## perf -> Show current performance statistics
## custom -> Use hud_custom configuration
#global.hud=perf
## Custom HUD configuration
## Performance eg. position=bottom-left\nbackground_alpha=0.9\nlegacy_layout=false\ncustom_text=%GAMENAME%\ncustom_text=%SYSTEMNAME%\ncustom_text=%EMULATORCORE%\nfps\ngpu_name\nengine_version\nvulkan_driver\nresolution\nram\ngpu_stats\ngpu_temp\ncpu_stats\ncpu_temp\ncore_load
## Game eg. position=bottom-left\nbackground_alpha=0\nlegacy_layout=false\nfont_size=32\nimage_max_width=200\nimage=%THUMBNAIL%\ncustom_text=%GAMENAME%\ncustom_text=%SYSTEMNAME%\ncustom_text=%EMULATORCORE%
## More examples at https://github.com/flightlessmango/MangoHud/blob/master/README.md#mangohud_config-and-mangohud_configfile-environment-variables
#global.hud_custom=position=bottom-left\nbackground_alpha=0\nlegacy_layout=false\nfont_size=64\nimage_max_width=200\nimage=%THUMBNAIL%\ncustom_text=%GAMENAME%\ncustom_text=%SYSTEMNAME%\ncustom_text=%EMULATORCORE%

# ------------ I - Per System Advanced Configuration ----------- #

## It's also possible to apply unique settings per system.
## eg. to set unique options for SNES:
#snes.core=snes9x_next
#snes.shaders=/userdata/shaders/shaders_glsl/mysnesshader.gplsp
#snes.ratio=16/9
#snes.smooth=0
#snes.rewind=1
#snes.autosave=0
#snes.emulator=libretro
#snes.integerscale=0

## Advanced RetroArch configuration
## See https://wiki.batocera.org/advanced_retroarch_settings
#snes.retroarch.menu_driver=rgui
#global.retroarch.input_max_users=4

## Emulate Wiimotes for Dolphin
## Allows regular pads to act as if though they were Wiimotes when running Dolphin.
## Real Wiimotes must not be paired with Batocera while using this option.
#wii.emulatedwiimotes=0

# ------------ J - Other ----------- #

## Scraper
## Set order scraper prefers, separated by commas.
## s -> snapshot
## b -> boxart
## f -> fanart
## a -> banner
## l -> logo
## 3b -> 3D boxart
#scrapper.style=s,b,f,a,l,3b

## Enable DXVK for Wine and FPS HUD.
#windows.dxvk=0
#windows.dxvk_hud=0

# ------------ User-generated Configurations ----------- #
system.cpu.governor=performance
audio.profile=output:hdmi-stereo@alsa_card.pci-0000_00_1f.3
dmanlfc commented 2 years ago

see the wiki about creating a log file - post a 'link' to it in reply.

dmanlfc commented 2 years ago

https://wiki.batocera.org/troubleshooting#create_a_batocera_support_file

dmanlfc commented 2 years ago

try v36 beta please

dmanlfc commented 2 years ago

@ToontjeM ?

anaszulkifli commented 2 years ago

I had same issue as well (Intel Comet Lake). I had tried a lot of suggestions in the audio issue page even running on beta 6 (w/ Kodi not working). One thing that works temporarily for me to hear audio on my HDMI TV is to create .asoundsrc and point everything to plughw:0,8 on all !default pcm ctl etc. This way I can hear a test sound on aplay -D plughw:0,8 but nothing from es etc. pw-mon does show ES is running on hdmi-extra-2. I think for ease of use, I suggest giving users GUI access for Pipewire/Wireplumber to see where the route is going via qjackctl/qpwgraph. Debugging this over trial and error is as good as solving Rubik's cube in the dark.

n2qz commented 9 months ago

@ToontjeM please provide the requested feedback.

ToontjeM commented 9 months ago

Not using Batocera anymore, sorry.