Closed HCATmike closed 1 year ago
Appears that load makes failure of driver more frequent, but it does happen eventually when not under much load. The DS920+ is used in a home, only by me. I just did a reboot, and here are the Blackmagic results-
Was it a bit more stable before DSM 7.1? Or is this the first time you've run it with DSM 7.2?
Also, have you looked at this page? https://github.com/bb-qq/r8152/wiki/Troubleshooting
Thank you for your reply. This is the first time I have run it, honestly. My DS 920+ already had the RC on it when I installed your driver. It is so fantastic, when it works, but I understand this may be a DSM RC problem. I reported it for the communities awareness, and to see if any other are having similar issues with the RC.Are other users seeing dropped connections with the DSM RC?
I somehow missed the trouble shooting page, so I will try some of the options I see there and report back if I find something that helps.
Thank you again,
Michael
On Apr 29, 2023, at 11:51 PM, bb-qq @.***> wrote:
Was it a bit more stable before DSM 7.1? Or is this the first time you've run it with DSM 7.2?
Also, have you looked at this page? https://github.com/bb-qq/r8152/wiki/Troubleshooting
— Reply to this email directly, view it on GitHub https://github.com/bb-qq/aqc111/issues/109#issuecomment-1528945282, or unsubscribe https://github.com/notifications/unsubscribe-auth/A7IBS7IDOVEV6XXKK6QJNULXDX4VTANCNFSM6AAAAAAXPSRFZ4. You are receiving this because you authored the thread.
How is this working in DSM 7.2 now? Thanks!
The official version of DSM 7.2 has already been released and is reported to work.
Since there have been no posts for a long period of time and there does not seem to be anything left to do in this Issue, I would like to close this Issue.
Description of the problem
Description of your products
Description of your environment
Output of
dmesg
commandOutput of
lsusb
commandOutput of
ifconfig -a
command