DS216play with DSM 6.2.3 update 3 didn't always work

Description of the problem

Plug 2.5gbe to DS216play read USB 3.0 port (DSM 6.2.3-25426 Update 3) sometimes DSM will show 2.5gbe network. sometime won't

Replace this line with your answer.

Description of your products

the product name of your NAS model
- and output of uname -a command Linux SWW-NAS 3.10.105 #25426 SMP Tue Nov 24 17:15:05 CST 2020 armv7l GNU/Linux synology_monaco_ds216play
- DSM version x.x DSM 6.2.3-25426 Update 3
the product name of the ethernet dongle USB 10/100/1G/2.5G LAN - Realtek Semiconductor Corp.

Description of your environment
connect directly to a PC or using a hub
- PC: NIC model name or chipset name Windows 10
- Hub: model name QSW-1105-5T

cable category (Cat.5e or Cat.6 or Cat.7) CAT 5E

Output of `dmesg` command


[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.10.105 (root@build1) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #25426 SMP Tue Nov 24 17:15:05 CST 2020
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: STi SoC with Flattened Device Tree, model: STiH410 B2120
[    0.000000] Ignoring memory below PHYS_OFFSET: 0x40000000-0x43000000
[    0.000000] Ignoring memory below PHYS_OFFSET: 0x42000000-0x43000000
[    0.000000] cma: CMA: reserved 16 MiB at 5f000000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] On node 0 totalpages: 118784
[    0.000000] free_area_init_node: node 0, pgdat 806e0000, node_mem_map 8073d000
[    0.000000]   Normal zone: 928 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 118784 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 7 pages/cpu @80b2b000 s6976 r8192 d13504 u32768
[    0.000000] pcpu-alloc: s6976 r8192 d13504 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 117856
[    0.000000] Kernel command line: console=ttyS0,115200 CONSOLE=/dev/ttyS0 ip=off mtdparts=stm-nand-bch.0:0x500000(boot),-(rfs) bpa2parts=BPA2_Region|aud-coded|aud-transcoded|vid-coded|vid-transcoded|vid-raw-input|vid-output-0|vid-decimated-1|vid-copied-1|vid-macroblock-0|vid-extra-data-0|vid-extra-data-1|v4l2-coded-video-buffers|vid-enc-data-0|vid-enc-scaled-0|vid-encoded-0|v4l2-clut|v4l2-grab|gfx-memory|aud-codec-data|vid-codec-data|aud-output-0|aud-output-1|vid-output-1|vid-decimated-0|vid-copied-0|vid-macroblock-1|blitter|vid-enc-data-1|vid-enc-scaled-1|vid-encoded-1|coredisplay-video|multicom|hades-l3|BPA2_Region0|BPA2_Region1:480M:0x62000000,v4l2-vb2|v4l2-stmc8jpg|v4l2-stmvout|v4l2-compo:24M:0x60800000,coprocs:32M:0x40000000,modules|audio:8M:0x60000000,bigphysarea|te-buffers|m2m-ca3:48M:0x48000000,STMCReserve:32768:0x47FF8000 vmalloc=775m mem=503316480@0x42000000 root=/dev/md0 rw syno_hw_version=DS216play hd_power_on_seq=2 ihd_num=2 netif_num=1 flash_size=8 phys_memsize=1024 syno_me
[    0.000000] bpa2: partition 'BPA2_Region' created at 0x62000000 (high), size 491520 kB (0x1e000000 B)
[    0.000000] bpa2: partition 'v4l2-vb2' created at 0x60800000 (high), size 24576 kB (0x01800000 B)
[    0.000000] bpa2: partition 'coprocs' created at 0x40000000 (high), size 32768 kB (0x02000000 B)
[    0.000000] bpa2: partition 'modules' created at 0x60000000 (high), size 8192 kB (0x00800000 B)
[    0.000000] bpa2: partition 'bigphysarea' created at 0x48000000 (low), size 49152 kB (0x03000000 B)
[    0.000000] bpa2: partition 'STMCReserve' created at 0x47ff8000 (low), size 32 kB (0x00008000 B)
[    0.000000] Synology Hardware Version: DS216play-j
[    0.000000] Internal HD num: 2
[    0.000000] Internal netif num: 1
[    0.000000] SYNO Transcoding Memory Mode: 3
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 464MB = 464MB total
[    0.000000] Memory: 393560k/393560k available, 81576k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
vector  : 0xffff0000 - 0xffff1000   (   4 kB)
fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
vmalloc : 0x9d800000 - 0xff000000   (1560 MB)
lowmem  : 0x80000000 - 0x9d000000   ( 464 MB)
modules : 0x7f000000 - 0x80000000   (  16 MB)
.text : 0x80008000 - 0x80667be4   (6527 kB)
.init : 0x80668000 - 0x806a2b40   ( 235 kB)
.data : 0x806a4000 - 0x806e0ac0   ( 243 kB)
.bss : 0x806e0ac0 - 0x8073cd24   ( 369 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] st-lpc: lpc_clk running @ 30000000 Hz
[    0.000000] sched_clock: 32 bits at 30MHz, resolution 33ns, wraps every 143165ms
[    0.000000] st-lpc: clocksource initialised: iomem: 9d81c000
[    0.000000] L310 cache controller enabled
[    0.000000] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x10480000, Cache size: 1048576 B
[    0.000000] Console: colour dummy device 80x30
[    0.001795] Calibrating delay loop... 2996.63 BogoMIPS (lpj=14983168)
[    0.060212] pid_max: default: 32768 minimum: 301
[    0.060282] Security Framework initialized
[    0.060297] AppArmor: AppArmor initialized
[    0.060325] Mount-cache hash table entries: 512
[    0.060686] CPU: Testing write buffer coherency: ok
[    0.060990] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.061564] Setting up static identity map for 0x804c80d0 - 0x804c81ac
[    0.062011] CPU1: Booted secondary processor
[    0.120233] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.120283] Brought up 2 CPUs
[    0.120292] SMP: Total of 2 processors activated (5985.89 BogoMIPS).
[    0.120296] CPU: All CPU(s) started in SVC mode.
[    0.120648] devtmpfs: initialized
[    0.123774] xor: measuring software checksum speed
[    0.220221]    arm4regs  :  2325.200 MB/sec
[    0.320221]    8regs     :  1668.400 MB/sec
[    0.420221]    32regs    :  1695.200 MB/sec
[    0.420225] xor: using function: arm4regs (2325.200 MB/sec)
[    0.420233] pinctrl core: initialized pinctrl subsystem
[    0.420577] regulator-dummy: no parameters
[    0.421172] NET: Registered protocol family 16
[    0.424348] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.428517] syscon 9620000.sbc-syscfg: regmap [mem 0x09620000-0x09620fff] registered
[    0.428654] syscon 9280000.front-syscfg: regmap [mem 0x09280000-0x09280fff] registered
[    0.428779] syscon 9290000.rear-syscfg: regmap [mem 0x09290000-0x09290fff] registered
[    0.428899] syscon 92a0000.flash-syscfg: regmap [mem 0x092a0000-0x092a0fff] registered
[    0.429030] syscon 9600000.fvdp-lite-syscfg: regmap [mem 0x09600000-0x09600fff] registered
[    0.429148] syscon 92b0000.core-syscfg: regmap [mem 0x092b0000-0x092b0fff] registered
[    0.429272] syscon 94b5100.lpm-syscfg: regmap [mem 0x094b5100-0x094b60ff] registered
[    0.442629] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.442637] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.442794] st-pinctrl 961f080.pin-controller-sbc: nbanks = 6
[    0.442800] st-pinctrl 961f080.pin-controller-sbc: nfunctions = 14
[    0.442805] st-pinctrl 961f080.pin-controller-sbc: ngroups = 27
[    0.442955] st-pinctrl 961f080.pin-controller-sbc: PIO0 bank added.
[    0.443133] st-pinctrl 961f080.pin-controller-sbc: PIO1 bank added.
[    0.443291] st-pinctrl 961f080.pin-controller-sbc: PIO2 bank added.
[    0.443460] st-pinctrl 961f080.pin-controller-sbc: PIO3 bank added.
[    0.443620] st-pinctrl 961f080.pin-controller-sbc: PIO4 bank added.
[    0.443777] st-pinctrl 961f080.pin-controller-sbc: PIO5 bank added.
[    0.443865] st-pinctrl 961f080.pin-controller-sbc: Function[0         name:wakeup-pin,       groups:1]
[    0.443875] st-pinctrl 961f080.pin-controller-sbc: Function[1         name:rc,       groups:1]
[    0.443885] st-pinctrl 961f080.pin-controller-sbc: Function[2         name:sbc_serial0,      groups:1]
[    0.443894] st-pinctrl 961f080.pin-controller-sbc: Function[3         name:sbc_serial1,      groups:1]
[    0.443904] st-pinctrl 961f080.pin-controller-sbc: Function[4         name:i2c10,    groups:1]
[    0.443913] st-pinctrl 961f080.pin-controller-sbc: Function[5         name:i2c11,    groups:1]
[    0.443928] st-pinctrl 961f080.pin-controller-sbc: Function[6         name:keyscan,  groups:1]
[    0.443983] st-pinctrl 961f080.pin-controller-sbc: Function[7         name:gmac1,    groups:8]
[    0.443997] st-pinctrl 961f080.pin-controller-sbc: Function[8         name:pwm1,     groups:4]
[    0.444010] st-pinctrl 961f080.pin-controller-sbc: Function[9         name:spi10,    groups:2]
[    0.444023] st-pinctrl 961f080.pin-controller-sbc: Function[10        name:spi11,    groups:2]
[    0.444035] st-pinctrl 961f080.pin-controller-sbc: Function[11        name:spi12,    groups:2]
[    0.444044] st-pinctrl 961f080.pin-controller-sbc: Function[12        name:cec0,     groups:1]
[    0.444061] st-pinctrl 961f080.pin-controller-sbc: Function[13        name:hdmirx0,  groups:1]
[    0.444161] st-pinctrl 920f080.pin-controller-front0: nbanks = 10
[    0.444167] st-pinctrl 920f080.pin-controller-front0: nfunctions = 24
[    0.444173] st-pinctrl 920f080.pin-controller-front0: ngroups = 53
[    0.444316] st-pinctrl 920f080.pin-controller-front0: PIO10 bank added.
[    0.444480] st-pinctrl 920f080.pin-controller-front0: PIO11 bank added.
[    0.444645] st-pinctrl 920f080.pin-controller-front0: PIO12 bank added.
[    0.444813] st-pinctrl 920f080.pin-controller-front0: PIO13 bank added.
[    0.444977] st-pinctrl 920f080.pin-controller-front0: PIO14 bank added.
[    0.445143] st-pinctrl 920f080.pin-controller-front0: PIO15 bank added.
[    0.445311] st-pinctrl 920f080.pin-controller-front0: PIO16 bank added.
[    0.445471] st-pinctrl 920f080.pin-controller-front0: PIO17 bank added.
[    0.445634] st-pinctrl 920f080.pin-controller-front0: PIO18 bank added.
[    0.445799] st-pinctrl 920f080.pin-controller-front0: PIO19 bank added.
[    0.445894] st-pinctrl 920f080.pin-controller-front0: Function[0      name:serial0,  groups:4]
[    0.445914] st-pinctrl 920f080.pin-controller-front0: Function[1      name:serial1,  groups:4]
[    0.445932] st-pinctrl 920f080.pin-controller-front0: Function[2      name:serial2,  groups:1]
[    0.445953] st-pinctrl 920f080.pin-controller-front0: Function[3      name:mmc1,     groups:1]
[    0.445964] st-pinctrl 920f080.pin-controller-front0: Function[4      name:i2c0,     groups:1]
[    0.445975] st-pinctrl 920f080.pin-controller-front0: Function[5      name:i2c1,     groups:1]
[    0.445985] st-pinctrl 920f080.pin-controller-front0: Function[6      name:i2c2,     groups:1]
[    0.446003] st-pinctrl 920f080.pin-controller-front0: Function[7      name:i2c3,     groups:3]
[    0.446026] st-pinctrl 920f080.pin-controller-front0: Function[8      name:spi0,     groups:4]
[    0.446049] st-pinctrl 920f080.pin-controller-front0: Function[9      name:spi1,     groups:4]
[    0.446080] st-pinctrl 920f080.pin-controller-front0: Function[10     name:spi2,     groups:6]
[    0.446112] st-pinctrl 920f080.pin-controller-front0: Function[11     name:spi3,     groups:6]
[    0.446132] st-pinctrl 920f080.pin-controller-front0: Function[12     name:systrace, groups:1]
[    0.446141] st-pinctrl 920f080.pin-controller-front0: Function[13     name:scr0,     groups:1]
[    0.446150] st-pinctrl 920f080.pin-controller-front0: Function[14     name:scr1,     groups:1]
[    0.446181] st-pinctrl 920f080.pin-controller-front0: Function[15     name:tsin0,    groups:2]
[    0.446211] st-pinctrl 920f080.pin-controller-front0: Function[16     name:tsin1,    groups:2]
[    0.446241] st-pinctrl 920f080.pin-controller-front0: Function[17     name:tsin2,    groups:2]
[    0.446254] st-pinctrl 920f080.pin-controller-front0: Function[18     name:tsin3,    groups:1]
[    0.446268] st-pinctrl 920f080.pin-controller-front0: Function[19     name:tsin4,    groups:1]
[    0.446289] st-pinctrl 920f080.pin-controller-front0: Function[20     name:tsin5,    groups:2]
[    0.446318] st-pinctrl 920f080.pin-controller-front0: Function[21     name:tsout0,   groups:2]
[    0.446332] st-pinctrl 920f080.pin-controller-front0: Function[22     name:tsout1,   groups:1]
[    0.446354] st-pinctrl 920f080.pin-controller-front0: Function[23     name:mtsin0,   groups:1]
[    0.446447] st-pinctrl 921f080.pin-controller-front1: nbanks = 1
[    0.446454] st-pinctrl 921f080.pin-controller-front1: nfunctions = 1
[    0.446459] st-pinctrl 921f080.pin-controller-front1: ngroups = 1
[    0.446602] st-pinctrl 921f080.pin-controller-front1: PIO20 bank added.
[    0.446703] st-pinctrl 921f080.pin-controller-front1: Function[0      name:tsin4,    groups:1]
[    0.446779] st-pinctrl 922f080.pin-controller-rear: nbanks = 6
[    0.446785] st-pinctrl 922f080.pin-controller-rear: nfunctions = 11
[    0.446790] st-pinctrl 922f080.pin-controller-rear: ngroups = 17
[    0.446936] st-pinctrl 922f080.pin-controller-rear: PIO30 bank added.
[    0.447117] st-pinctrl 922f080.pin-controller-rear: PIO31 bank added.
[    0.447281] st-pinctrl 922f080.pin-controller-rear: PIO32 bank added.
[    0.447436] st-pinctrl 922f080.pin-controller-rear: PIO33 bank added.
[    0.447610] st-pinctrl 922f080.pin-controller-rear: PIO34 bank added.
[    0.447776] st-pinctrl 922f080.pin-controller-rear: PIO35 bank added.
[    0.448010] st-pinctrl 922f080.pin-controller-rear: Function[0        name:dvo,      groups:2]
[    0.448025] st-pinctrl 922f080.pin-controller-rear: Function[1        name:i2c4,     groups:1]
[    0.448039] st-pinctrl 922f080.pin-controller-rear: Function[2        name:i2c5,     groups:1]
[    0.448053] st-pinctrl 922f080.pin-controller-rear: Function[3        name:usb0,     groups:1]
[    0.448066] st-pinctrl 922f080.pin-controller-rear: Function[4        name:usb1,     groups:1]
[    0.448087] st-pinctrl 922f080.pin-controller-rear: Function[5        name:usb3,     groups:1]
[    0.448098] st-pinctrl 922f080.pin-controller-rear: Function[6        name:pwm0,     groups:1]
[    0.448132] st-pinctrl 922f080.pin-controller-rear: Function[7        name:spi4,     groups:4]
[    0.448168] st-pinctrl 922f080.pin-controller-rear: Function[8        name:i2s_out,  groups:2]
[    0.448206] st-pinctrl 922f080.pin-controller-rear: Function[9        name:i2s_in,   groups:2]
[    0.448217] st-pinctrl 922f080.pin-controller-rear: Function[10       name:spdif_out,        groups:1]
[    0.448310] st-pinctrl 923f080.pin-controller-flash: nbanks = 3
[    0.448316] st-pinctrl 923f080.pin-controller-flash: nfunctions = 3
[    0.448321] st-pinctrl 923f080.pin-controller-flash: ngroups = 3
[    0.448455] st-pinctrl 923f080.pin-controller-flash: PIO40 bank added.
[    0.448625] st-pinctrl 923f080.pin-controller-flash: PIO41 bank added.
[    0.448795] st-pinctrl 923f080.pin-controller-flash: PIO42 bank added.
[    0.448920] st-pinctrl 923f080.pin-controller-flash: Function[0       name:mmc0,     groups:1]
[    0.448950] st-pinctrl 923f080.pin-controller-flash: Function[1       name:fsm,      groups:1]
[    0.449011] st-pinctrl 923f080.pin-controller-flash: Function[2       name:nand,     groups:1]
[    0.450917] reset-stih407 powerdown-controller.8: registered
[    0.452608] reset-stih407 softreset-controller.10: registered
[    0.452804] reset-stih407 picophyreset-controller.11: registered
[    0.455658] st-clk clocks.0: SoC clock tree intialized
[    0.466127] bio: create slab <bio-0> at 0
[    0.630230] raid6: int32x1  gen()   241 MB/s
[    0.800383] raid6: int32x1  xor()   179 MB/s
[    0.970382] raid6: int32x2  gen()   326 MB/s
[    1.140352] raid6: int32x2  xor()   212 MB/s
[    1.310388] raid6: int32x4  gen()   314 MB/s
[    1.480324] raid6: int32x4  xor()   218 MB/s
[    1.650399] raid6: int32x8  gen()   350 MB/s
[    1.820226] raid6: int32x8  xor()   221 MB/s
[    1.820231] raid6: using algorithm int32x8 gen() (350 MB/s)
[    1.820234] raid6: .... xor() 221 MB/s, rmw enabled
[    1.820237] raid6: using intx1 recovery algorithm
[    1.820496] st-fdma 8e20000.fdma-mpe: IRQ: 37
[    1.820513] st-fdma 8e20000.fdma-mpe: Base address: 9d8c0000
[    1.822117] st-fdma 8e40000.fdma-mpe: IRQ: 39
[    1.822131] st-fdma 8e40000.fdma-mpe: Base address: 9d9c0000
[    1.823647] st-fdma 8e60000.fdma-mpe: IRQ: 41
[    1.823670] st-fdma 8e60000.fdma-mpe: Base address: 9da00000
[    1.825447] vmmc0: at 3300 mV
[    1.825493] st-vsense 9061004.voltage-regulator: vmmc0  vsense voltage regulator registered
[    1.825859] vgaarb: loaded
[    1.826148] SCSI subsystem initialized
[    1.826359] libata version 3.00 loaded.
[    1.826595] media: Linux media interface: v0.10
[    1.826659] Linux video capture interface: v2.00
[    1.826869] pps_core: LinuxPPS API ver. 1 registered
[    1.826874] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.826926] PTP clock support registered
[    1.827843] Switching to clocksource st-lpc clocksource
[    1.828111] AppArmor: AppArmor Filesystem Enabled
[    1.837279] NET: Registered protocol family 2
[    1.837664] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    1.837703] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    1.837739] TCP: Hash tables configured (established 4096 bind 4096)
[    1.837778] TCP: reno registered
[    1.837785] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    1.837805] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    1.837974] NET: Registered protocol family 1
[    1.838128] RPC: Registered named UNIX socket transport module.
[    1.838133] RPC: Registered udp transport module.
[    1.838137] RPC: Registered tcp transport module.
[    1.838140] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.838147] PCI: CLS 0 bytes, default 64
[    1.838251] Trying to unpack rootfs image as initramfs...
[    3.131127] Freeing initrd memory: 3912K (80c2c000 - 80ffe000)
[    3.133008] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    3.134453] sti pm: Copying poke table & poke loop to buffer
[    3.134463] sti pm: entering prepare:CONTROLLER PASSIVE STANDBY
[    3.134468] sti pm: support mode: CONTROLLER PASSIVE STANDBY
[    3.134471] sti pm: Suspend support registered
[    3.134638] synology :         fan ctrl initialized.
[    3.134649] synology :        fan sense initialized.
[    3.134662] synology :       sata power initialized.
[    3.134679] synology :         model id initialized.
[    3.134687] synology :    disk led ctrl initialized.
[    3.134696] synology :     phy led ctrl initialized.
[    3.135992] Initialise module verification
[    3.136038] audit: initializing netlink socket (disabled)
[    3.136062] type=2000 audit(3.120:1): initialized
[    3.183181] st-pinctrl 920f080.pin-controller-front0: maps: function systrace group systrace-default num 6
[    3.183293] stm-systrace 9180000.systrace: Systrace: syscfg0=0x003f0000 (prev: 0x003f0000)
[    3.183304] stm-systrace 9180000.systrace: Systrace: syscfg1=0x00580058 (prev: 0x00580058)
[    3.183312] stm-systrace 9180000.systrace: Systrace: syscfg2=0x00990098 (prev: 0x00990098)
[    3.183320] stm-systrace 9180000.systrace: Systrace: syscfg3=0x00530050 (prev: 0x00530050)
[    3.183328] stm-systrace 9180000.systrace: Systrace: syscfg4=0x00550054 (prev: 0x00550054)
[    3.183336] stm-systrace 9180000.systrace: Systrace: syscfg5=0x00570056 (prev: 0x00570056)
[    3.183344] stm-systrace 9180000.systrace: Systrace: syscfg6=0x03ff03ff (prev: 0x03ff0000)
[    3.183354] stm-systrace 9180000.systrace: Systrace: STM_CR[0x0000] = 0x00000600 (prev. 0x00000000)
[    3.183362] stm-systrace 9180000.systrace: Systrace: STM_MCR[0x0008] = 0x00000000 (prev. 0x00000000)
[    3.183370] stm-systrace 9180000.systrace: Systrace: STM_TER[0x0010] = 0x000003ff (prev. 0x000003ff)
[    3.183378] stm-systrace 9180000.systrace: Systrace: STM_FTR[0x0080] = 0x00000001 (prev. 0x00000000)
[    3.183386] stm-systrace 9180000.systrace: Systrace: STM_CTR[0x0088] = 0x00000001 (prev. 0x00000000)
[    3.183392] Systrace: STM IP revision is V3
[    3.183396] Systrace: STM_PID=0x00680dec(0x00680dec)
[    3.183400] Systrace: STM_CID=0xb105f00d(0xb105f00d)
[    3.183404] MTT: registering output driver stm
[    3.183409] stm-systrace 9180000.systrace: Systrace: driver probed.
[    3.195888] VFS: Disk quotas dquot_6.5.2
[    3.196191] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    3.199330] NFS: Registering the id_resolver key type
[    3.199351] Key type id_resolver registered
[    3.199356] Key type id_legacy registered
[    3.199382] msgmni has been set to 808
[    3.200022] async_tx: api initialized (async)
[    3.200031] Key type asymmetric registered
[    3.200035] Asymmetric key parser 'x509' registered
[    3.200427] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    3.200435] io scheduler noop registered
[    3.200451] io scheduler cfq registered (default)
[    3.324739] STMicroelectronics ASC driver initialized
[    3.324884] st-pinctrl 961f080.pin-controller-sbc: maps: function sbc_serial0 group sbc_serial0-0 num 3
[    3.324985] 9530000.serial: ttyS0 at MMIO 0x9530000 (irq = 170) is a st-asc
[    4.982756] console [ttyS0] enabled
[    4.986586] st-pinctrl 961f080.pin-controller-sbc: maps: function sbc_serial1 group sbc_serial1-0 num 3
[    4.996050] 9531000.serial: ttyS1 at MMIO 0x9531000 (irq = 171) is a st-asc
[    5.004023] st-hwrandom 8a89000.rng: ST Random Number Generator Device Probe Successful
[    5.021164] brd: module loaded
[    5.024210] Loading iSCSI transport class v2.0-870.
[    5.031803] ahci ahci.0: can't get clock
[    5.035722] miphy28lp-phy 9b22000.miphy28lp: miphy28lp_phy_init_sata
[    5.042079] miphy28lp-phy 9b22000.miphy28lp: sata-up mode, addr 0x9d8e4000
[    5.053021] ahci ahci.0: forcing PORTS_IMPL to 0x1
[    5.057830] ahci ahci.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[    5.065748] ahci ahci.0: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[    5.075053] scsi0 : ahci_platform
[    5.078795] ata1: SATA max UDMA/133 mmio [mem 0x09b20000-0x09b20fff] port 0x100 irq 191
[   13.467885] ata1: link is slow to respond, please be patient (ready=0)
[   18.267884] ata1: softreset failed (device not ready)
[   18.272922] ata1: SRST fail, set srst fail flag
[   18.817889] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   18.824057] ata1: link reset sucessfully clear error flags
[   18.830343] ata1.00: ATA-9: ST3000VN000-1HJ166, SC60, max UDMA/133
[   18.836510] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   18.843294] ata1.00: SN:            W6A0JCH1
[   18.848430] ata1.00: configured for UDMA/133
[   18.853359] scsi 0:0:0:0: Direct-Access     ATA      ST3000VN000-1HJ166       SC60 PQ: 0 ANSI: 5
[   18.862918] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[   18.870666] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   18.876151] sd 0:0:0:0: [sda] Write Protect is off
[   18.876783] ahci ahci.1: can't get clock
[   18.876790] miphy28lp-phy 9b2a000.miphy28lp: miphy28lp_phy_init_sata
[   18.876794] miphy28lp-phy 9b2a000.miphy28lp: sata-up mode, addr 0x9d8ea000
[   18.878694] ahci ahci.1: forcing PORTS_IMPL to 0x1
[   18.878731] ahci ahci.1: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[   18.878737] ahci ahci.1: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[   18.918490] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   18.918563] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   18.929357] scsi1 : ahci_platform
[   18.933059] ata2: SATA max UDMA/133 mmio [mem 0x09b28000-0x09b28fff] port 0x100 irq 202
[   18.941079] Delay 5 seconds to wait for disk 2 ready.
[   18.985066]  sda: sda1 sda2 sda3
[   18.989997] sd 0:0:0:0: [sda] Attached SCSI disk
[   32.307886] ata2: link is slow to respond, please be patient (ready=0)
[   37.007889] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   37.015595] ata2.00: ATA-10: ST4000VN008-2DR166, SC60, max UDMA/133
[   37.021862] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   37.028644] ata2.00: SN:            ZGY39KV9
[   37.039006] ata2.00: configured for UDMA/133
[   37.044308] scsi 1:0:0:0: Direct-Access     ATA      ST4000VN008-2DR166       SC60 PQ: 0 ANSI: 5
[   37.053898] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[   37.061645] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[   37.067370] sd 1:0:0:0: [sdb] Write Protect is off
[   37.072165] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   37.072243] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   37.082549] st-pinctrl 923f080.pin-controller-flash: maps: function fsm group fsm num 7
[   37.090970] stm-spi-fsm 9022000.spifsm: No provision for SPI reset on boot-from-spi system
[   37.099247] stm-spi-fsm 9022000.spifsm: Individual block locking scheme enabled
[   37.106545] stm-spi-fsm 9022000.spifsm: found device: n25q064, size = 800000 (8MiB) erasesize = 0x00010000 (64KiB)
[   37.116900] Searching for RedBoot partition table in n25q064 at offset 0x7f0000
[   37.129403] 6 RedBoot partitions found on MTD device n25q064
[   37.133917]  sdb: sdb1 sdb2 sdb3
[   37.138273] Creating 6 MTD partitions on "n25q064":
[   37.143139] 0x000000000000-0x0000000c0000 : "RedBoot"
[   37.149699] sd 1:0:0:0: [sdb] Attached SCSI disk
[   37.154518] 0x0000000c0000-0x000000390000 : "zImage"
[   37.160530] 0x000000390000-0x0000007d0000 : "rd.gz"
[   37.166378] 0x0000007d0000-0x0000007e0000 : "vendor"
[   37.171364] vender Mac0 address : 00:11:32:54:3e:37
[   37.171371] vender Mac1 doesn't set ucSum:0x00 Buf:0x00 Sum:0.
[   37.171375] vender Mac2 doesn't set ucSum:0x00 Buf:0x00 Sum:0.
[   37.171379] vender Mac3 doesn't set ucSum:0x00 Buf:0x00 Sum:0.
[   37.171386] serial number='15C0NEN075200'
[   37.172404] 0x0000007e0000-0x0000007f0000 : "RedBoot Config"
[   37.179070] 0x0000007f0000-0x000000800000 : "FIS directory"
[   37.188229] st-pinctrl 961f080.pin-controller-sbc: maps: function gmac1 group rgmii1-0 num 13
[   37.196748] st-pinctrl 961f080.pin-controller-sbc: maps: function gmac1 group rgmii1-mdio num 3
[   37.205629] stmmaceth 9630000.dwmac: phy-addr property limits bus scan to this addr
[   37.213395] stmmac - user ID: 0xca, Synopsys ID: 0x37
[   37.218451]  Ring mode enabled
[   37.221491]  DMA HW capability register supported
[   37.226006]  Enhanced/Alternate descriptors
[   37.230365]  Enabled extended descriptors
[   37.234359]  RX Checksum Offload Engine supported (type 2)
[   37.239843]  TX Checksum insertion supported
[   37.244096]  Wake-Up On Lan supported
[   37.247759]  Enable RX Mitigation via HW Watchdog Timer
[   37.254268] libphy: stmmac: probed
[   37.257661] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01) active
[   37.264994] i2c /dev entries driver
[   37.268750] st-pinctrl 922f080.pin-controller-rear: maps: function i2c4 group i2c4-default num 3
[   37.278484] st-i2c 9844000.i2c: ST I2C(0x0) initialized
[   37.283736] st-pinctrl 922f080.pin-controller-rear: maps: function i2c5 group i2c5-default num 3
[   37.292569] st-i2c 9845000.i2c: No ID specified in DT alias
[   37.300788] st_thermal 91a0000.temp0: STMicroelectronics thermal sensor initialised
[   37.309451] st-lpc-wdt 8787000.lpc_wdt: LPC Watchdog driver registered, reset type is cold
[   37.318064] md: linear personality registered for level -1
[   37.323537] md: raid0 personality registered for level 0
[   37.328845] md: raid1 personality registered for level 1
[   37.334140] md: raid10 personality registered for level 10
[   37.339846] md: raid6 personality registered for level 6
[   37.345145] md: raid5 personality registered for level 5
[   37.350455] md: raid4 personality registered for level 4
[   37.356496] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[   37.365427] sdhci: Secure Digital Host Controller Interface driver
[   37.371614] sdhci: Copyright(c) Pierre Ossman
[   37.375955] sdhci-pltfm: SDHCI platform and OF driver helper
[   37.390999] Mali: Mali device driver loaded
[   37.391910] ST_DDR CNTRL driver registered
[   37.396373] st-lpm driver registered
[   37.400336] TCP: cubic registered
[   37.403641] NET: Registered protocol family 17
[   37.408143] Key type dns_resolver registered
[   37.412520] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[   37.420199] Registering SWP/SWPB emulation handler
[   37.425274] cpufreq_cpu0: failed to get cpu0 regulator: -19
[   37.435375] Loading module verification blacklist certificates
[   37.441243] Loading module verification certificates
[   37.446268] MODSIGN: Loaded cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[   37.461343] MODSIGN: Loaded cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[   37.471723] MODSIGN: Loaded cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[   37.483568] MODSIGN: Loaded cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[   37.509785] MTT: registering output driver dfs
[   37.514249] MTT: multicore-trace initialized.
[   37.518667] vmmc0: disabling
[   37.521542] regulator-dummy: disabling
[   37.543344] Freeing unused kernel memory: 232K (80668000 - 806a2000)
[   37.651692] stih407-usb-genphy f8.usbpicophy: STiH407 USB Generic picoPHY driver probed!
[   37.660642] stih407-usb-genphy fc.usbpicophy: STiH407 USB Generic picoPHY driver probed!
[   37.670922] stih407-usb-genphy 100.usbpicophy: STiH407 USB Generic picoPHY driver probed!
[   37.698714] sti-usb3-phy 8f90000.usb3_phy: USB3 MiPHY Ref clk 30 MHz enabled
[   37.705829] sti-usb3-phy 8f90000.usb3_phy: usb3 ioaddr 0x9d974000, pipew ioaddr 0x9d976000
[   37.714163] sti-usb3-phy 8f90000.usb3_phy: USB3 MiPHY2 probed
[   37.789103] usbcore: registered new interface driver usbfs
[   37.796827] usbcore: registered new interface driver hub
[   37.807125] usbcore: registered new device driver usb
[   37.874062] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   37.897754] ehci-pci: EHCI PCI platform driver
[   37.923055] ehci-platform: EHCI generic platform driver
[   37.950638] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   38.022599] st-pinctrl 922f080.pin-controller-rear: maps: function usb0 group usb2-0 num 3
[   38.030948] st-hcd 9a03c00.usb: 48MHz ohci clk not found
[   38.036380] stih407-usb-genphy f8.usbpicophy: Generic picoPHY usb port init.
[   38.043440] stih407-usb-genphy f8.usbpicophy: found picoPHY in rst state
[   38.052211] ehci-platform ehci-platform.0: EHCI Host Controller
[   38.058164] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
[   38.066712] ehci-platform ehci-platform.0: irq 183, io mem 0x09a03e00
[   38.088097] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[   38.097099] hub 1-0:1.0: USB hub found
[   38.100897] hub 1-0:1.0: 1 port detected
[   38.106934] ohci-platform ohci-platform.0: Generic Platform OHCI Controller
[   38.113949] ohci-platform ohci-platform.0: new USB bus registered, assigned bus number 2
[   38.122095] ohci-platform ohci-platform.0: irq 212, io mem 0x09a03c00
[   38.192689] hub 2-0:1.0: USB hub found
[   38.196448] hub 2-0:1.0: 1 port detected
[   38.232618] st-pinctrl 922f080.pin-controller-rear: maps: function usb3 group usb3-2 num 3
[   38.241001] usb-st-dwc3 8f94000.dwc3: glue-logic addr 0x9da4c000, syscfg-reg offset 0x110
[   38.250435] dwc3 9900000.dwc3: unable to find phy
[   38.256838] sti-usb3-phy 8f90000.usb3_phy: MiPHY28LP setup
[   38.262363] sti-usb3-phy 8f90000.usb3_phy: MiPHY28LP release 0x231 found
[   38.269671] sti-usb3-phy 8f90000.usb3_phy: USB3 MIPHY28LP timer initialized
[   38.276625] stih407-usb-genphy 100.usbpicophy: Generic picoPHY usb port init.
[   38.483637] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   38.489162] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3
[   38.497495] xhci-hcd xhci-hcd.0.auto: irq 187, io mem 0x09900000
[   38.503949] xHCI xhci_add_endpoint called for root hub
[   38.503956] xHCI xhci_check_bandwidth called for root hub
[   38.504213] hub 3-0:1.0: USB hub found
[   38.508009] hub 3-0:1.0: 1 port detected
[   38.512064] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   38.517551] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
[   38.527373] xHCI xhci_add_endpoint called for root hub
[   38.527383] xHCI xhci_check_bandwidth called for root hub
[   38.527815] hub 4-0:1.0: USB hub found
[   38.531622] hub 4-0:1.0: 1 port detected
[   38.535752] usb-st-dwc3 8f94000.dwc3: configured as host DRD
[   38.541537] usb-st-dwc3 8f94000.dwc3: probe exits fine...
[   38.611774] ds216play_synobios: module license 'Synology Inc.' taints kernel.
[   38.619687] Disabling lock debugging due to kernel taint
[   38.626304] correction with 0x00
[   38.627448] 2021-2-21 12:56:55 UTC
[   38.627456] synobios: load, major number 201
[   38.631814] Brand: Synology
[   38.631823] Model: DS-216play
[   38.631830] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   38.631849] synobios cpu_arch proc entry initialized
[   38.636804] synobios crypto_hw proc entry initialized
[   38.641861] synobios syno_platform proc entry initialized
[   38.647482] synobios open /dev/ttyS1 success
[   38.665692] synobios: unload
[   38.686541] md: Autodetecting RAID arrays.
[   38.762967] md: invalid raid superblock magic on sda3
[   38.768024] md: sda3 does not have a valid v0.90 superblock, not importing!
[   38.848716] md: invalid raid superblock magic on sdb3
[   38.853756] md: sdb3 does not have a valid v0.90 superblock, not importing!
[   38.860723] md: Scanned 6 and added 4 devices.
[   38.865150] md: autorun ...
[   38.867942] md: considering sda1 ...
[   38.871511] md:  adding sda1 ...
[   38.874728] md: sda2 has different UUID to sda1
[   38.879264] md:  adding sdb1 ...
[   38.882481] md: sdb2 has different UUID to sda1
[   38.887011] md: created md0
[   38.889801] md: bind<sdb1>
[   38.892525] md: bind<sda1>
[   38.895237] md: running: <sda1><sdb1>
[   38.899233] md/raid1:md0: active with 2 out of 2 mirrors
[   38.941954] md0: detected capacity change from 0 to 2549940224
[   38.948005] md: considering sda2 ...
[   38.951590] md:  adding sda2 ...
[   38.954826] md:  adding sdb2 ...
[   38.960626] md: created md1
[   38.963418] md: bind<sdb2>
[   38.966155] md: bind<sda2>
[   38.968910] md: running: <sda2><sdb2>
[   38.974824] md/raid1:md1: active with 2 out of 2 mirrors
[   38.993217] md1: detected capacity change from 0 to 2147418112
[   38.999492] md: ... autorun DONE.
[   39.052492]  md0: unknown partition table
[   41.137975] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[   41.158071] usb 4-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
[   42.923104] EXT4-fs (md0): barriers disabled
[   42.931480] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[   45.426408] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[   46.887183] EXT4-fs (md0): re-mounted. Opts: (null)
[   54.321934] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   54.327376] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   54.898521]  md1: unknown partition table
[   55.011781] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k
[   59.126518] NET: Registered protocol family 10
[   59.185716] sit: IPv6 over IPv4 tunneling driver
[   59.906695] init: syno-auth-check main process (2845) killed by TERM signal
[   61.176390] systemd-udevd[3149]: starting version 204
[   61.238025] fuse init (API version 7.22)
[   61.551940] Loading modules backported from Linux version v3.18.1-0-g39ca484
[   61.559025] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c
[   62.521234] exFAT: Version 1.2.9
[   63.491965] correction with 0x00
[   63.494880] 2021-2-21 12:57:20 UTC
[   63.494891] synobios: load, major number 201
[   63.499199] Brand: Synology
[   63.499210] Model: DS-216play
[   63.499217] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   63.499241] synobios cpu_arch proc entry initialized
[   63.504194] synobios crypto_hw proc entry initialized
[   63.509264] synobios syno_platform proc entry initialized
[   63.514925] synobios open /dev/ttyS1 success
[   66.414469] dwmac1000: Master AXI performs any burst length
[   66.420419] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   67.646911] init: dhcp-client (eth0) main process (4832) killed by TERM signal
[   69.373729] md: md3 stopped.
[   69.382978] md: bind<sdb3>
[   69.408126] md/raid1:md3: active with 1 out of 1 mirrors
[   69.423831] md3: detected capacity change from 0 to 3995849261056
[   69.438618]  md3: unknown partition table
[   69.444487] md: md2 stopped.
[   69.450102] md: bind<sda3>
[   69.498012] md/raid1:md2: active with 1 out of 1 mirrors
[   69.508026] md2: detected capacity change from 0 to 2995655213056
[   69.523342]  md2: unknown partition table
[   71.408156] libphy: stmmac-0:01 - Link is Up - 1000/Full
[   71.414181] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   71.616859] EXT4-fs (md2): barriers disabled
[   71.628350] EXT4-fs (md3): barriers disabled
[   71.711919] EXT4-fs (md2): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
[   71.735110] EXT4-fs (md3): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
[   72.660908] ip_tables: (C) 2000-2006 Netfilter Core Team
[   72.794970] nf_conntrack version 0.5.0 (6470 buckets, 25880 max)
[   73.278296] init: dhcp-client (eth0) main process (5021) killed by TERM signal
[   74.665164] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   79.882602] usbcore: registered new interface driver usb-storage
[   80.081146] usbcore: registered new interface driver usblp
[   80.423098] usbcore: registered new interface driver usbhid
[   80.428713] usbhid: USB HID core driver
[   89.321234] ICS Version 1.0.2 : Final (05:23:11 May 12 2020)
[   89.321245] ICS init 1 debug_flags 0x4ffffffff debug_chan 0x1 connect 0 watchdog 0 bpa2_part 'multicom'
[   89.321249] stih41x_configure_clocks_ics() : start
[   89.321255] clock lock 9b00a354
[   89.321267] clk : clk_00 9b824580 taken
[   89.321273] clk : clk_01 9b824600 taken
[   89.321280] clk : clk_02 9b824500 taken
[   89.321287] clk : clk_03 9b824500 taken
[   89.321298] prepare all clocks
[   89.321305] stih41x_configure_clocks_ics() : exit
[   89.321318] ICS loading firmware 'vid_firmware-mpeg4p2-stih407.elf' cpu 2 (video)
[   89.373194] ICS starting cpu 2 (video) entry 0x41c00400
[   89.373208] enable clock 1
[   89.373221] ICS loading firmware 'audio_firmware-profile0-stih407.elf' cpu 3 (audio)
[   89.397471] ICS starting cpu 3 (audio) entry 0x40c00c00
[   89.397482] enable clock 2
[   89.397494] ICS loading firmware 'audio_firmware-profile0-stih407.audio1.elf' cpu 1 (gp1)
[   89.419416] ICS starting cpu 1 (gp1) entry 0x41400c00
[   89.419426] enable clock 0
[   89.419438] ICS loading firmware 'security_firmware-stih410.elf' cpu 4 (gp0)
[   89.441413] ICS starting cpu 4 (gp0) entry 0x40400300
[   89.441424] enable clock 3
[   89.441434] ICS: Using BPA2 partition 'multicom'
[   89.441440] Test: ICS_GetTuneable(ICS_TUNEABLE_ADMIN_THREAD_PRIORITY) = -90 Calling ICS_cpu_init(0, 0x1f, 0x0)
[   89.441452] insmod:ics_cpu_init:346 cpuNum 0 cpuMask 0x1f flags 0x0
[   89.441557] insmod:ics_cpu_init:384 cpu 0 ('host') cpuMask 0x1f ics_state 9b282000
[   89.442807] insmod:ics_cpu_init:550 Memory usage : allocated 0 OS used 0 (+0) avail 0
[   89.442816] ICS Adding region[0] 0x60000000 0x800000 cacheflag=0x1
[   89.448139] ICS debug: 9b386e00 in module_dir
[   89.586230] ata1.00: configured for UDMA/133
[   89.590514] ata1: EH complete
[   89.648909] MME Version 4.4.1 Final (05:23:20 May 12 2020)
[   89.648920] MME module init=1 debug_flags=0x1 pool_size=262144
[   89.654760] insmod:mme_init:373 Succeeded on cpu 0 mme_state 96a0fc00
[   89.654770] insmod:mme_init:377 Memory usage : OS used 0 (+0) avail 0
[   89.729333] Load module infra_main [?]               by insmod (pid 7532)
[   89.937860] ata2.00: configured for UDMA/133
[   89.942190] ata2: EH complete
[   90.049488] Load module stm_event_main [?]           by insmod (pid 7578)
[   90.551240] stm-ce cesc.54: Enabling clock stfe_ccsc
[   90.556211] stm-ce cesc.54: Clock stfe_ccsc @ 225000068Hz
[   90.561646] stm-ce cesc.54: Enabling clock CLK_TP
[   90.566357] stm-ce cesc.54: Clock CLK_TP @ 400000000Hz
[   90.572438] stm-ce cesc.54: Disabling clock stfe_ccsc
[   90.577499] stm-ce cesc.54: Disabling clock CLK_TP
[   90.629748] st_relay_core_open done ok 786432x10
[   90.714572] st_relayfs_open done ok
[   90.789673] Init of MME log wrapper
[   90.793157] acc_mme_loginit done ok
[   90.959039] bdispII_device_features.c:409: BDisp/BLT: blitter is a 'STiH407' (15)
[   90.998055] bdispII.c:183: AQ(bdisp-aq2) not found
[   91.002848] bdispII.c:183: AQ(bdisp-aq3) not found
[   91.007634] bdispII.c:183: AQ(bdisp-aq4) not found
[   91.012651] bdispII_device_features.c:409: BDisp/BLT: blitter is a 'STiH407' (15)
[   91.050806] bdispII.c:183: AQ(bdisp-aq2) not found
[   91.055598] bdispII.c:183: AQ(bdisp-aq3) not found
[   91.060429] bdispII.c:183: AQ(bdisp-aq4) not found
[   91.096737] Loading os wrapper module...
[   91.132403] Loading stmfe utility module ...
[   91.414759] Loading module stm_fe ...
[   91.418708] st-pinctrl 920f080.pin-controller-front0: maps: function tsin0 group tsin0_serial num 6
[   91.427826] stm_demod_get_pdata: No syscfg phandle specified
[   91.433613] demod_config_pdata: demod config not set properly
[   91.439470] st-pinctrl 920f080.pin-controller-front0: maps: function tsin4 group tsin4_serial_alt3 num 6
[   91.449142] stm_demod_get_pdata: ts mapping control syscfg update ok
[   91.455553] demod_config_pdata: demod config not set properly
[   91.461443] st-pinctrl 920f080.pin-controller-front0: maps: function tsin3 group tsin3_serial num 6
[   91.470623] stm_demod_get_pdata: No syscfg phandle specified
[   91.476375] demod_config_pdata: demod config not set properly
[   91.482634] stm_lnb_get_pdata: lnb config not properly set
[   91.488235] stm_lnb_get_pdata: lnb config not properly set
[   91.494120] stm_fe_diseqc_probe: Config diseqc stm_fe_diseqc.0
[   91.500301] stm_fe_diseqc_probe: Config diseqc stm_fe_diseqc.1
[   91.506628] stm_fe_ip_probe: Configuring ip stm_fe_ip.0
[   91.511943] stm_fe_ip_probe: Configuring ip stm_fe_ip.1
[   91.517226] stm_fe_ip_probe: Configuring ip stm_fe_ip.2
[   91.522556] stm_fe_ip_probe: Configuring ip stm_fe_ip.3
[   91.527844] stm_fe_ip_probe: Configuring ip stm_fe_ip.4
[   91.533162] stm_fe_ip_probe: Configuring ip stm_fe_ip.5
[   92.014043] st-fdma 8e20000.fdma-mpe: Requesting firmware: fdma_STiH407_0.elf
[   92.041478] st-fdma 8e20000.fdma-mpe: SLIM hw 0.134413, FDMA fw 1.0
[   92.048665] platform denc.fw: requesting frm: 'denc.fw', 7f348910/971f550c
[   92.055543] platform denc.fw: using denc_H407_b2120.fw for denc.fw firmware
[   92.073904] platform denc.fw: loading firmware data.
[   92.078889] platform denc.fw: firmware data is loaded (size=40).
[   92.084932] platform denc.fw: frm 'denc.fw' successfully loaded
[   92.091017] platform hdf.fw: requesting frm: 'hdf.fw', 7f348910/971f574c
[   92.097709] platform hdf.fw: using hdf_H407_b2120.fw for hdf.fw firmware
[   92.113778] platform hdf.fw: loading firmware data.
[   92.118670] platform hdf.fw: firmware data is loaded (size=264).
[   92.124710] platform hdf.fw: frm 'hdf.fw' successfully loaded
[   92.140958]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_HDMI
[   92.148083]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_REF_HDMIPHY
[   92.155464]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_TMDS_HDMI
[   92.162670]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_MAIN_DISP
[   92.170283]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_MAIN_DISP
[   92.177841]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_TMDS_HDMI
[   92.185105]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_HDMI
[   92.192242]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_REF_HDMIPHY
[   92.201814]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_HDMI
[   92.208947]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_REF_HDMIPHY
[   92.216340]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_TMDS_HDMI
[   92.223560]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_MAIN_DISP
[   92.701222] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = -95
[   92.701419] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = -95
[   92.701608] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = -95
[   92.701805] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = -95
[   92.701990] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = -95
[   92.702186] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = 0
[   92.702393] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = -95
[   92.702503] stmvout_probe_media_planes: Display 0  found 7 planes (skipped 0)
[   92.709750] stmvout_probe_media_outputs: Display 0: 4 output Plug added
[   92.817995]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_HDMI
[   92.825133]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_REF_HDMIPHY
[   92.832517]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_TMDS_HDMI
[   92.839724]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_MAIN_DISP
[   94.652929] SE-Aud-CtoP pol:2 prio:58
[   94.656588] SE-Aud-PtoD pol:2 prio:58
[   94.660288] SE-Aud-DtoM pol:2 prio:60
[   94.663944] SE-Aud-MPost pol:2 prio:62
[   94.667685] SE-Vid-CtoP pol:2 prio:58
[   94.671369] SE-Vid-PtoD pol:2 prio:58
[   94.675021] SE-Vid-DtoM pol:2 prio:60
[   94.678699] SE-Vid-MPost pol:2 prio:62
[   94.682446] SE-Vid-H264Int pol:2 prio:59
[   94.686366] SE-Vid-HevcInt pol:2 prio:59
[   94.690304] SE-Aud-Reader pol:2 prio:64
[   94.694139] SE-Aud-StreamT pol:2 prio:59
[   94.698070] SE-Aud-Mixer pol:2 prio:64
[   94.701812] SE-Aud-BcstMix pol:2 prio:64
[   94.705731] SE-Aud-Bypass pol:2 prio:64
[   94.709581] SE-Man-Coord pol:2 prio:59
[   94.713326] SE-Man-BrSrcGrab pol:2 prio:50
[   94.717416] SE-Man-BrCapture pol:2 prio:50
[   94.721531] SE-Man-DsVideo pol:2 prio:74
[   94.725448] SE-Playbck-Drain pol:2 prio:64
[   94.729563] SE-EncAud-ItoP pol:2 prio:61
[   94.733483] SE-EncAud-PtoC pol:2 prio:58
[   94.737400] SE-EncAud-CtoO pol:2 prio:59
[   94.741351] SE-EncVid-ItoP pol:2 prio:61
[   94.745270] SE-EncVid-PtoC pol:2 prio:58
[   94.749217] SE-EncVid-CtoO pol:2 prio:59
[   94.753136] SE-Encod-Coord pol:2 prio:61
[   94.757053] SE-Other pol:2 prio:50
[   94.762046] player2 probe done ok
[   94.765658] [sched_delayed] sched: RT throttling activated
[   94.920714] stm_te_tsmux_mme.te_tsmux_mme_init_module() - Load module te_tsmux_mme by insmod (pid 8152)
[   99.103593] stm_te_hal.stpti_tp_probe() - Probed 8880000.tetp device
[   99.110136] stm_te_hal.stpti_tp_probe() - Caching firmware pti_tp3.elf
[   99.152550] stm_te_hal.stptiHAL_pDeviceInit() - Clocks Per Second = 100.
[   99.159295] stm-tango-tp 8880000.tetp: Resource tp [0x8880000:0x88aefff]
[   99.166003] stm_te_hal.stptiHAL_pDeviceInit() - TANGO TP mapped... [ 08880000 => 9f040000 ]
[   99.174382] stm-tango-tp 8880000.tetp: Enabling clock CLK_TP
[   99.180087] stm-tango-tp 8880000.tetp: Clock CLK_TP @ 400000000Hz
[   99.186217] stm-tango-tp 8880000.tetp: IRQ 57
[   99.190632] stm_te_hal.stptiHAL_pDeviceInit() - TP ISR installed on number 0x00000039.
[   99.198590] stm-tango-tp 8880000.tetp: Loading firmware: pti_tp3.elf
[   99.205181] stm-tango-tp 8880000.tetp: Loading segment 0 0x00000000 (0x1a8 bytes) -> 0x9f040000 (0x11b0 bytes)
[   99.215576] stm-tango-tp 8880000.tetp: Loading segment 1 0x000011b0 (0xe4f8 bytes) -> 0x9f0411b0 (0xe528 bytes)
[   99.235279] stm-tango-tp 8880000.tetp: Loading segment 2 0x00400000 (0x9f38 bytes) -> 0x9f050000 (0x9f38 bytes)
[   99.252033] stm_te_hal.stptiHAL_pDeviceInit() - TP Firmware loaded successfully
[   99.259366] stm_te_hal.stptiHAL_pDeviceInit() - Started TP from reset (waiting for Ready)
[   99.267612] stm_te_hal.stptiHAL_TPInterruptHandler() - STxP70_TP0 : Starting 01022501_TP_VERSION [CS00029AA8] Built 10:08:55 Sep  4 2014
[   99.279928] stm_te_hal.stptiHAL_pDeviceSetInitialisationParameters() - Assuming STTKD driver in system.
[   99.289654] stm_te_hal.stptiHAL_TPInterruptHandler() - STxP70_TP0 : Total Usage 39688 of 44032 bytes.
[   99.298978] stm_te_hal.stptiHAL_TPInterruptHandler() - STxP70_TP0 : Configuring Timer Counter for packet timestamps. Divider 0xB

[ 99.327967] stm_te_hal.stptiHAL_pDeviceInit() - TP (device0) Started Successfully. [ 99.335619] stm_te_hal.stptiHAL_pDeviceInit() - Across 8 vDevices, there are 256 slots, 96 buffers, 32 indexers, 256 hw section filters. [ 99.350613] stm_te_hal.stptiHAL_pDeviceSleep() - TP sleeping (device0) [ 99.357156] stm-tango-tp 8880000.tetp: Disabling clock CLK_TP [ 99.388440] stm_te_hal.stpti_stfe_probe() - Probed 8a20000.tefe device [ 99.395294] stm_te_hal.stpti_stfe_probe() - Caching firmware pti_memdma_h407.elf [ 99.403913] stm_te_hal.stptiHAL_EventTask() - Entering Event Task for 1ff07fff [ 99.451430] stm_te_hal.tango_idle() - pDevice idle [ 99.456573] stm_te_hal.tango_suspend() - pDevice 0 suspended [ 99.462316] stm-tango-tp 8880000.tetp: Enabling clock CLK_TP [ 99.468313] stm-tango-tp 8880000.tetp: Clock CLK_TP @ 400000000Hz [ 99.474615] stm_te_hal.stptiHAL_pDeviceWakeup() - TP woken up (device0) [ 99.481346] stm_te_hal.stptiHAL_pDevicePowerdown() - TP held in reset (device0) [ 99.488852] stm_te_hal.stptiHAL_pDevicePowerdown() - Saving TP shared memory (device0) [ 99.500191] stm_te_hal.stptiHAL_pDevicePowerdown() - TP powered down (device0) [ 99.507459] stm-tango-tp 8880000.tetp: Disabling clock CLK_TP [ 99.513248] stm_te_hal.tango_suspend() - pDevice 0 frozen [ 99.590318] stm_te_hal.stptiTSHAL_Init() - Initialising STFE device 8a20000.tefe

[ 99.599285] stm-tango-stfe 8a20000.tefe: Resource stfe [0x8a20000:0x8a2ffff] [ 99.606398] stm-tango-stfe 8a20000.tefe: Resource stfe-ram [0x8a00000:0x8a03fff] [ 99.613893] stm-tango-stfe 8a20000.tefe: Idle IRQ 67 [ 99.618932] stm-tango-stfe 8a20000.tefe: error IRQ 66 [ 99.624006] stm-tango-stfe 8a20000.tefe: Enabling clock stfe_ccsc [ 99.630167] stm-tango-stfe 8a20000.tefe: Clock stfe_ccsc @ 225000068Hz [ 99.636726] stm-tango-stfe 8a20000.tefe: Enabling clock stfe_frc-0 [ 99.643023] stm-tango-stfe 8a20000.tefe: Setting clock stfe_frc-0 to 27000000Hz [ 99.650581] stm-tango-stfe 8a20000.tefe: Clock stfe_frc-0 @ 27000001Hz [ 99.657321] stm-tango-stfe 8a20000.tefe: Loading firmware: pti_memdma_h407.elf [ 99.665362] stm-tango-stfe 8a20000.tefe: Loading IMEM segment 0 0x00000000 (0x39f bytes) -> 0x9dcb8000 (0x4d4 bytes) [ 99.676248] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 1 0x00000020 (0x5c bytes) -> 0x9daae080 (0x5c bytes) [ 99.686670] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 2 0x00000037 (0x0 bytes) -> 0x9daae0dc (0xc0 bytes) [ 99.697044] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 3 0x00000010 (0x14 bytes) -> 0x9daae040 (0x14 bytes) [ 99.707478] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 4 0x00000000 (0x18 bytes) -> 0x9daae000 (0x18 bytes) [ 99.717938] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 5 0x000000a0 (0x2e0 bytes) -> 0x9daae280 (0x2e0 bytes) [ 99.728593] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 6 0x00000080 (0x5c bytes) -> 0x9daae200 (0x5c bytes) [ 99.739022] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 7 0x00000160 (0x200 bytes) -> 0x9daae580 (0x200 bytes) [ 99.749710] stm_te_hal.stptiTSHAL_Stfev2_CreateConfig() - THIS IS THE RIGHT MEMDMA FW [ 99.757600] stm_te_hal.stptiTSHAL_Stfev2_CreateConfig() - THERE ARE 23 MEMDMA CH and 1 TP [ 99.766103] stm_te_hal.stptiTSHAL_Stfev2_MemdmaInit() - MEMDMA ISR installed on number 0x00000043. [ 99.775204] stm_te_hal.stptiTSHAL_Stfev2_SystemInit() - ERROR TSIN ISR error installed on number 0x00000042. [ 99.788916] stm_te_hal.stfe_idle() - stfe idle [ 99.793553] stm_te_hal.stptiTSHAL_Stfev2_SystemTerm() - ERROR TSIN ISR error uninstalled on number 0x00000042. [ 99.803693] stm_te_hal.stptiTSHAL_Stfev2_MemdmaTerm() - MEMDMA ISR uninstalled on number 0x00000043. [ 99.812973] stm-tango-stfe 8a20000.tefe: Disabling clock stfe_ccsc [ 99.819246] stm-tango-stfe 8a20000.tefe: Disabling clock stfe_tsout-0 [ 99.825769] stm-tango-stfe 8a20000.tefe: Disabling clock stfe_tsout-1 [ 99.832368] stm-tango-stfe 8a20000.tefe: Disabling clock stfe_frc-0 [ 99.838768] stm-tango-stfe 8a20000.tefe: Disabling clock stfe_frc-1 [ 99.845118] stm-tango-stfe 8a20000.tefe: Disabling clock stfe_mchi [ 99.851378] stm_te_hal.stfe_suspend() - Suspend TSInput 0 [ 99.856951] stm_te_hal.stfe_suspend() - Powered-down TSInput -1 [ 100.475889] Loading sat tuner wrapper module ... [ 100.591788] Loading VGLNA module ... [ 100.702806] Loading t/c tuner wrapper module ... [ 100.812265] Loading FE IP driver module... [ 101.027697] Loading stv4100 tuner module... [ 101.177785] Loading stv0367 driver module... [ 101.259298] Loading stv6120 tuner module ... [ 101.317191] Loading stv0910 driver module... [ 101.937330] Loading module ctrl_via_stm_fe = -1 [ 101.941897] stm_fe_discover: Discovered stm_fe_diseqc.0 ... [ 101.947470] stm_fe_discover: Discovered stm_fe_diseqc.1 ... [ 101.953095] stm_fe_discover: Discovered stm_fe_ip.0 ... [ 101.958343] stm_fe_discover: Discovered stm_fe_ip.1 ... [ 101.963565] stm_fe_discover: Discovered stm_fe_ip.2 ... [ 101.968805] stm_fe_discover: Discovered stm_fe_ip.3 ... [ 101.974058] stm_fe_discover: Discovered stm_fe_ip.4 ... [ 101.979307] stm_fe_discover: Discovered stm_fe_ip.5 ... [ 101.984529] 8 stm_fe objects discovered [ 101.988381] DVB: registering new adapter (ST DVB frontend driver) [ 101.994782] demod_config_pdata: demod config not set properly [ 102.000714] demod_config_pdata: demod config not set properly [ 102.006639] demod_config_pdata: demod config not set properly [ 102.012835] stm_dvb_get_lnb_pdata: lnb config not properly set [ 102.018815] stm_dvb_get_lnb_pdata: lnb config not properly set [ 102.025035] stm_dvb_diseqc_attach() Invalid demod object, cannot attach diseqc [ 102.032452] stm_dvb_diseqc_attach() Invalid demod object, cannot attach diseqc [ 102.040353] Configuring ip IPFE-STM_FE IP name stm-dvb-ip.37 [ 102.046419] Configuring ip IPFE-STM_FE IP name stm-dvb-ip.40 [ 102.054138] Configuring ip IPFE-STM_FE IP name stm-dvb-ip.43 [ 102.065901] Configuring ip IPFE-STM_FE IP name stm-dvb-ip.46 [ 102.098652] Configuring ip IPFE-STM_FE IP name stm-dvb-ip.49 [ 102.115678] Configuring ip IPFE-STM_FE IP name stm-dvb-ip.52 [ 102.182761] Created stm_fe_ip.0 for parent stm_fe_ip.0 [ 102.208118] Created stm_fe_ip.1 for parent stm_fe_ip.1 [ 102.216643] Created stm_fe_ip.2 for parent stm_fe_ip.2 [ 102.223629] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(001132543e37). [ 102.232887] Created stm_fe_ip.3 for parent stm_fe_ip.3 [ 102.258026] Created stm_fe_ip.4 for parent stm_fe_ip.4 [ 102.264929] Created stm_fe_ip.5 for parent stm_fe_ip.5 [ 102.272416] Found 8 demuxes, 256 pid filters, 96 output filters [ 102.281517] Added device stm_dvb_demux.0 [ 102.287365] Added device stm_dvb_demux.1 [ 102.302093] Added device stm_dvb_demux.2 [ 102.311189] Added device stm_dvb_demux.3 [ 102.330188] Added device stm_dvb_demux.4 [ 102.337943] Added device stm_dvb_demux.5 [ 102.347541] Added device stm_dvb_demux.6 [ 102.357279] Added device stm_dvb_demux.7 [ 102.544779] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized [ 102.598127] HevcppProbe SE-Vid-Hevcpp pol:2 prio:50 [ 102.603120] HevcppProbe hw core nb: 1 [ 102.606970] ret value : 0x0 max frequency value : 240000000 [ 102.613006] OSDEV_LinkDevice /dev/hevcpp - Major 247, Minor 0 [ 102.619127] Hevcpp probe done ok [ 103.284461] iSCSI:target_core_device.c:617:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 103.296602] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully [ 103.377405] compo_capture_subdev_init(): created disabled links to video plane [ 103.384694] compo_capture_subdev_init(): created disabled links to gfx plane [ 103.392034] compo_capture_subdev_init(): created disabled links to output [ 103.514358] OSDEV_LinkDevice /dev/allocator - Major 245, Minor 0 [ 103.520407] AllocatorLoadModule done ok [ 103.569895] iSCSI:target_core_file.c:146:fd_attach_hba RODSP plugin for fileio is enabled. [ 103.578196] iSCSI:target_core_file.c:153:fd_attach_hba ODX Token Manager is enabled. [ 103.603399] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled. [ 103.612524] iSCSI:target_core_ep.c:786:ep_attach_hba RODSP plugin for epio is enabled. [ 103.620457] iSCSI:target_core_ep.c:793:ep_attach_hba ODX Token Manager is enabled. [ 103.628821] h264encoder 8c85000.h264encoder: Hva registers base address is 0x8c85000 and size is 0xfff [ 103.638228] h264encoder 8c85000.h264encoder: Hva esram base address is 0x6000000 and size is 0x3ffff [ 103.647590] h264encoder 8c85000.h264encoder: Hva interrupt number is 90 [ 103.654862] h264encoder 8c85000.h264encoder: Hva error interrupt number is 91 [ 103.662233] h264encoder 8c85000.h264encoder: Hva clock set to 300000000 [ 103.668892] h264encoder 8c85000.h264encoder: Hva version is 0x400 [ 103.676027] h264encoder 8c85000.h264encoder: (StreamId:0x0) Unable to soft-reset hva => reset platform [ 103.686329] h264encoder 8c85000.h264encoder: (StreamId:0x0) Incorrect stbus plug configuration, StBusPlugConfig = 0x0 [ 103.696940] h264encoder 8c85000.h264encoder: (StreamId:0x0) Force stbus plug configuration to recommended value, StBusPlugConfig = 0x408081 [ 103.710406] h264encoder 8c85000.h264encoder: (StreamId:0x0) Reset hva and configure registers done [ 103.720583] h264encoder 8c85000.h264encoder: Setting hva max instance number to 30 [ 103.729614] h264encoder 8c85000.h264encoder: H264 encode hardware host transformer probe done ok [ 103.946247] H264ppProbe SE-Vid-H264pp pol:2 prio:50 [ 103.951169] H264pp: hw core nb: 1 [ 103.954500] ret value : 0x0 max frequency value : 266250000 [ 103.960166] OSDEV_LinkDevice /dev/h264pp - Major 246, Minor 0 [ 103.965907] h264pp probe done ok [ 104.046836] HadesProbe: Probing device with DT [ 104.051352] For CLK_HWPE_HADES ret value : 0x0 max frequency value : 400000000 [ 104.058620] For CLK_FC_HADES ret value : 0x0 max frequency value : 332999958 [ 104.147791] HadesPmRuntime: Resume .. [ 104.151543] STHORM: library initialization(regs 0a010000(7274496), IRQ 107, partition hades-l3 [ 104.160748] RAB SLAVE: CONF_FC: source 0a100000 (00100000) dest 50000000 size 00080000 [ 104.168864] RAB SLAVE: CL_PERIPH: source 0a200000 (00200000) dest 20000000 size 00080000 [ 104.177467] RAB SLAVE: CONF_ENCMEM: source 0a280000 (00280000) dest 10000000 size 00040000 [ 104.185863] RAB SLAVE: CL_HWPE_OUT: source 0a2f0000 (002f0000) dest 30000000 size 00008000 [ 104.194201] RAB SLAVE: CL_HWPE_OUT: source 0a2f8000 (002f8000) dest 30000000 size 00008000 [ 104.202488] LoadHadesDevice: Hades API initialized with registers base 0a000000, IRQ base 107, BPA2 partition hades-l3 [ 104.224397] STHORM: firmware program segments loaded at 40a00000 (2097152 bytes) [ 104.232074] HADES_API: Configuring runtime struct @ 0a100000 [ 104.237722] HADES_API: Specified cluster mask: 0x80000001 for 1 clusters [ 104.244528] HADES_API: Booting fabric controller (id=4) @ 0xa119000 [ 104.250804] HADES_API: Waiting for boot message from FC .. [ 104.256430] HADES_API: ... FC has booted [ 104.260462] HADES_API: Sending first config message to FC, mailbox @ 0a118000 [ 104.267582] HADES_API: P2012 library initialization done [ 104.272897] LoadHadesDevice: HADES FW name: hades_fw.bin, size: 1247176 [ 104.279547] HADES_API: Configuring static binary [ 104.284158] HADES_API: HADES_InitTransformer: PedfRT_Descr_p(99308e00) ->binary.size: 1247176 clusterId: 0x1f [ 104.294128] HADES_API: HADES_InitTransformer -> pedf_rt (p:0x62430000 v:0x9da22000 size:4) [ 104.305550] HadesPmRuntime: Suspend .. [ 104.309470] CRCDriver: major 246, minor 0 to 19 [ 104.314101] Hades HEVC host transformer probe done ok [ 104.572602] stm-c8jpg 8c84000.c8jpg: found c8jpg device at: 0x08c84000, irq: 88 [ 104.580331] stm-c8jpg 8c84000.c8jpg: decoder successfully probed [ 104.643474] Maximum vp8 clock frequency not retrieved from DT [ 104.649359] hx170_check_chip_id: Chip ID: 0x67315058 [ 104.654635] VP8 hardware host transformer probe done ok [ 104.838009] stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_HDMI [ 104.845146] stm-ios: vibe_os_clk_disable: Clock already disable CLK_REF_HDMIPHY [ 104.852541] stm-ios: vibe_os_clk_disable: Clock already disable CLK_TMDS_HDMI [ 104.859763] stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_MAIN_DISP [ 107.179135] warning: `nginx' uses 32-bit capabilities (legacy support in use) [ 107.411436] loop: module loaded [ 110.868369] findhostd uses obsolete (PF_INET,SOCK_PACKET) [ 116.115195] r8152: module verification failed: signature and/or required key missing - tainting kernel [ 116.126701] usbcore: registered new interface driver r8152 [ 116.349391] usb 4-1: reset SuperSpeed USB device number 2 using xhci-hcd [ 116.378181] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 116.390757] xhci-hcd xhci-hcd.0.auto: xHCI xhci_drop_endpoint called with disabled ep 967e1c00 [ 116.399591] xhci-hcd xhci-hcd.0.auto: xHCI xhci_drop_endpoint called with disabled ep 967e1c2c [ 116.408862] xhci-hcd xhci-hcd.0.auto: xHCI xhci_drop_endpoint called with disabled ep 967e1c58 [ 116.518656] netif_napi_add() called with weight 256 on device eth%d [ 116.557933] r8152 4-1:1.0 eth1: v2.14.0 (2020/09/24) [ 116.563017] r8152 4-1:1.0 eth1: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.

[ 121.091736] init: nmbd main process (11284) killed by TERM signal [ 122.308443] ifconfig: page allocation failure: order:4, mode:0x40d0 [ 122.314739] CPU: 1 PID: 12031 Comm: ifconfig Tainted: PF O 3.10.105 #25426 [ 122.314769] [<80015320>] (unwind_backtrace+0x0/0xec) from [<8001193c>] (show_stack+0x10/0x14) [ 122.314784] [<8001193c>] (show_stack+0x10/0x14) from [<800920f8>] (warn_alloc_failed+0xe4/0x11c) [ 122.314795] [<800920f8>] (warn_alloc_failed+0xe4/0x11c) from [<8009443c>] (alloc_pages_nodemask+0x514/0x7a4) [ 122.314817] [<8009443c>] (alloc_pages_nodemask+0x514/0x7a4) from [<7fc72a34>] (alloc_rx_agg+0x58/0x150 [r8152]) [ 122.314892] [<7fc72a34>] (alloc_rx_agg+0x58/0x150 [r8152]) from [<7fc72bac>] (alloc_all_mem+0x80/0x208 [r8152]) [ 122.314908] [<7fc72bac>] (alloc_all_mem+0x80/0x208 [r8152]) from [<7fc75278>] (rtl8152_open+0x38/0x230 [r8152]) [ 122.314927] [<7fc75278>] (rtl8152_open+0x38/0x230 [r8152]) from [<8040e214>] (dev_open+0x98/0xf8) [ 122.314937] [<8040e214>] (__dev_open+0x98/0xf8) from [<8040e454>] (dev_change_flags+0x94/0x128) [ 122.314946] [<8040e454>] (__dev_change_flags+0x94/0x128) from [<8040e554>] (dev_change_flags+0x10/0x48) [ 122.314960] [<8040e554>] (dev_change_flags+0x10/0x48) from [<80464ef4>] (devinet_ioctl+0x65c/0x734) [ 122.314971] [<80464ef4>] (devinet_ioctl+0x65c/0x734) from [<803f868c>] (sock_ioctl+0x1c8/0x29c) [ 122.314984] [<803f868c>] (sock_ioctl+0x1c8/0x29c) from [<800dfbf0>] (do_vfs_ioctl+0x4b4/0xaa8) [ 122.314994] [<800dfbf0>] (do_vfs_ioctl+0x4b4/0xaa8) from [<800e0254>] (SyS_ioctl+0x70/0x80) [ 122.315004] [<800e0254>] (SyS_ioctl+0x70/0x80) from [<8000db40>] (ret_fast_syscall+0x0/0x38) [ 122.315009] Mem-info: [ 122.315013] Normal per-cpu: [ 122.315018] CPU 0: hi: 186, btch: 31 usd: 55 [ 122.315023] CPU 1: hi: 186, btch: 31 usd: 0 [ 122.315033] active_anon:19390 inactive_anon:19721 isolated_anon:0 active_file:14336 inactive_file:14498 isolated_file:0 unevictable:882 dirty:4329 writeback:423 unstable:0 free:6833 slab_reclaimable:4878 slab_unreclaimable:5943 mapped:14097 shmem:6623 pagetables:1887 bounce:0 free_cma:3675 [ 122.315052] Normal free:27332kB min:8192kB low:10240kB high:12288kB active_anon:77560kB inactive_anon:78884kB active_file:57344kB inactive_file:57992kB unevictable:3528kB isolated(anon):0kB isolated(file):0kB present:475136kB managed:393560kB mlocked:3528kB dirty:17316kB writeback:1692kB mapped:56388kB shmem:26492kB slab_reclaimable:19512kB slab_unreclaimable:23772kB kernel_stack:2720kB pagetables:7548kB unstable:0kB bounce:0kB free_cma:14700kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no [ 122.315057] lowmem_reserve[]: 0 0 [ 122.315063] Normal: 5814kB (UEMC) 5818kB (UEMRC) 47116kB (UEMRC) 8132kB (MC) 4464kB (C) 32128kB (C) 9256kB (C) 0512kB 11024kB (C) 02048kB 0*4096kB = 27340kB [ 122.315090] 35488 total pagecache pages [ 122.315096] 0 pages in swap cache [ 122.315100] Swap cache stats: add 165, delete 165, find 0/0 [ 122.315103] Free swap = 2096424kB [ 122.315106] Total swap = 2097084kB [ 122.321655] 118784 pages of RAM [ 122.321665] 7812 free pages [ 122.321668] 15262 reserved pages [ 122.321671] 7162 slab pages [ 122.321674] 378458 pages shared [ 122.321677] 0 pages swap cached [ 128.194666] init: synoscheduler-vmtouch main process (2261) killed by TERM signal [ 131.840899] init: nmbd main process (12989) killed by TERM signal [ 134.962472] init: synoscheduler-vmtouch main process (12832) killed by TERM signal [ 143.130688] usbcore: registered new interface driver snd-usb-audio [ 143.282895] usbcore: registered new interface driver snd-usb-hiface [ 145.061764] init: synoscheduler-vmtouch main process (13967) killed by TERM signal [ 147.046145] init: synoscheduler-vmtouch main process (16367) killed by TERM signal [ 149.538255] PPP generic driver version 2.4.2 [ 149.808924] NET: Registered protocol family 24 [ 150.287803] PPP MPPE Compression module registered [ 150.635295] PPP BSD Compression module registered [ 150.776620] PPP Deflate Compression module registered [ 150.851537] l2tp_core: L2TP core driver, V2.0 [ 151.708058] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 151.864101] Initializing XFRM netlink socket [ 151.939440] NET: Registered protocol family 15 [ 163.159043] init: nmbd main process (14061) killed by KILL signal [ 293.848188] usbcore: deregistering interface driver r8152 [ 309.469355] usb 4-1: reset SuperSpeed USB device number 2 using xhci-hcd [ 309.488178] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 309.497348] xhci-hcd xhci-hcd.0.auto: xHCI xhci_drop_endpoint called with disabled ep 967e1c00 [ 309.505967] xhci-hcd xhci-hcd.0.auto: xHCI xhci_drop_endpoint called with disabled ep 967e1c2c [ 309.514612] xhci-hcd xhci-hcd.0.auto: xHCI xhci_drop_endpoint called with disabled ep 967e1c58 [ 309.687935] r8152 4-1:1.0 eth1: v2.14.0 (2020/09/24) [ 309.692904] r8152 4-1:1.0 eth1: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.

[ 309.708553] usbcore: registered new interface driver r8152 [ 314.825187] ifconfig: page allocation failure: order:4, mode:0x40d0 [ 314.831514] CPU: 0 PID: 17807 Comm: ifconfig Tainted: PF O 3.10.105 #25426 [ 314.831541] [<80015320>] (unwind_backtrace+0x0/0xec) from [<8001193c>] (show_stack+0x10/0x14) [ 314.831556] [<8001193c>] (show_stack+0x10/0x14) from [<800920f8>] (warn_alloc_failed+0xe4/0x11c) [ 314.831567] [<800920f8>] (warn_alloc_failed+0xe4/0x11c) from [<8009443c>] (alloc_pages_nodemask+0x514/0x7a4) [ 314.831589] [<8009443c>] (alloc_pages_nodemask+0x514/0x7a4) from [<7fc72a34>] (alloc_rx_agg+0x58/0x150 [r8152]) [ 314.831677] [<7fc72a34>] (alloc_rx_agg+0x58/0x150 [r8152]) from [<7fc72bac>] (alloc_all_mem+0x80/0x208 [r8152]) [ 314.831692] [<7fc72bac>] (alloc_all_mem+0x80/0x208 [r8152]) from [<7fc75278>] (rtl8152_open+0x38/0x230 [r8152]) [ 314.831710] [<7fc75278>] (rtl8152_open+0x38/0x230 [r8152]) from [<8040e214>] (dev_open+0x98/0xf8) [ 314.831720] [<8040e214>] (__dev_open+0x98/0xf8) from [<8040e454>] (dev_change_flags+0x94/0x128) [ 314.831729] [<8040e454>] (__dev_change_flags+0x94/0x128) from [<8040e554>] (dev_change_flags+0x10/0x48) [ 314.831743] [<8040e554>] (dev_change_flags+0x10/0x48) from [<80464ef4>] (devinet_ioctl+0x65c/0x734) [ 314.831754] [<80464ef4>] (devinet_ioctl+0x65c/0x734) from [<803f868c>] (sock_ioctl+0x1c8/0x29c) [ 314.831767] [<803f868c>] (sock_ioctl+0x1c8/0x29c) from [<800dfbf0>] (do_vfs_ioctl+0x4b4/0xaa8) [ 314.831777] [<800dfbf0>] (do_vfs_ioctl+0x4b4/0xaa8) from [<800e0254>] (SyS_ioctl+0x70/0x80) [ 314.831786] [<800e0254>] (SyS_ioctl+0x70/0x80) from [<8000db40>] (ret_fast_syscall+0x0/0x38) [ 314.831791] Mem-info: [ 314.831795] Normal per-cpu: [ 314.831799] CPU 0: hi: 186, btch: 31 usd: 0 [ 314.831804] CPU 1: hi: 186, btch: 31 usd: 0 [ 314.831813] active_anon:19850 inactive_anon:21365 isolated_anon:0 active_file:12719 inactive_file:12735 isolated_file:0 unevictable:881 dirty:9 writeback:0 unstable:0 free:7480 slab_reclaimable:4323 slab_unreclaimable:6654 mapped:14993 shmem:11047 pagetables:2139 bounce:0 free_cma:3693 [ 314.831833] Normal free:29920kB min:8192kB low:10240kB high:12288kB active_anon:79400kB inactive_anon:85460kB active_file:50876kB inactive_file:50940kB unevictable:3524kB isolated(anon):0kB isolated(file):0kB present:475136kB managed:393560kB mlocked:3524kB dirty:36kB writeback:0kB mapped:59972kB shmem:44188kB slab_reclaimable:17292kB slab_unreclaimable:26616kB kernel_stack:2824kB pagetables:8556kB unstable:0kB bounce:0kB free_cma:14772kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no [ 314.831838] lowmem_reserve[]: 0 0 [ 314.831844] Normal: 8334kB (UEMC) 15008kB (UEMC) 9016kB (UEMRC) 4632kB (C) 4364kB (C) 30128kB (C) 16256kB (C) 0512kB 11024kB (C) 02048kB 0*4096kB = 29956kB [ 314.831870] 37357 total pagecache pages [ 314.831876] 822 pages in swap cache [ 314.831880] Swap cache stats: add 10738, delete 9916, find 11939/12086 [ 314.831883] Free swap = 2060952kB [ 314.831887] Total swap = 2097084kB [ 314.838096] 118784 pages of RAM [ 314.838109] 8276 free pages [ 314.838117] 15262 reserved pages [ 314.838126] 7561 slab pages [ 314.838134] 356493 pages shared [ 314.838143] 822 pages swap cached


### Output of ``lsusb`` command

|usb1 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (ehci_hcd ehci-platform.0) hub |__usb2 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (Linux 3.10.105 ohci_hcd Generic Platform OHCI Controller ohci-platform.0) hub |usb3 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (Linux 3.10.105 xhci-hcd xHCI Host Controller xhci-hcd.0.auto) hub |usb4 1d6b:0003:0310 09 3.00 5000MBit/s 0mA 1IF (Linux 3.10.105 xhci-hcd xHCI Host Controller xhci-hcd.0.auto) hub |4-1 0bda:8156:3100 00 3.20 5000MBit/s 256mA 1IF (Realtek USB 10/100/1G/2.5G LAN 001000001)


### Output of ``ifconfig -a`` command

eth0 Link encap:Ethernet HWaddr 00:11:32:54:3E:37 inet addr:192.168.1.102 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:151067 errors:0 dropped:0 overruns:0 frame:0 TX packets:142222 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:72814177 (69.4 MiB) TX bytes:33114755 (31.5 MiB) Interrupt:130

lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:3582 errors:0 dropped:0 overruns:0 frame:0 TX packets:3582 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:484391 (473.0 KiB) TX bytes:484391 (473.0 KiB)

bb-qq / r8152