DS216+ instable with Club3d 2.5Gbit driver.

Description of the problem

I got the driver and 2.5Gb usb interface installed and working, but it's not stable. After a few MB of file transfer, data rate goes to 0 (when using the ip from the Club3d). The regular 216+ ethernetlink functions normal. DSM sometimes removes the new 2.5Gbit interface. Can't figure out what's the problem.

Description of your products

DS216+ upgraded tot 8GB ram Intel Celeron N3050 Club3d 2.5Gbit USB Club 3D USB 3.2 Gen1 adapter type A naar 2,5 Gigabit Ethernet ST./BU. zwart, CAC-1420 (Amazon) DSM 6.2.3-25426 update #68 used driver: bb-qq 2.14.0-2 r8152-braswell-2.14.0-2.spk from https://github.com/bb-qq/r8152/releases

Description of your environment

both NAS and PC connected through a 2.5Gbit QNAP QSW-1105-5T Cat 5e PC with Realteak 2.5Gb gaming Family controller

Output of `dmesg` command

[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.105 (root@build4) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #25426 SMP Mon Dec 14 18:45:24 CST 2020 [ 0.000000] Command line: root=/dev/md0 ihd_num=2 netif_num=1 HddHotplug=1 SataPortMap=21 DiskIdxMap=0002 acpi_enforce_resources=lax syno_castrated_xhc=0000:00:14.0@0x0c syno_hw_version=DS216+ vender_format_version=2 syno_hdd_detect=56,59,63,57 syno_hdd_enable=61,60,71,58 sn=1620NUN811304 macs=00113258afd4 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000085fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000086000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007a4befff] usable [ 0.000000] BIOS-e820: [mem 0x000000007a4bf000-0x000000007aebefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007aebf000-0x000000007bfbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007bfbf000-0x000000007bffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007bfff000-0x000000007bffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by INSYDE Corp. [ 0.000000] efi: ACPI 2.0=0x7bffe014 SMBIOS=0x7a850000 [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) [ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000006f000) (0MB) [ 0.000000] efi: mem02: type=10, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB) [ 0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000086000) (0MB) [ 0.000000] efi: mem04: type=0, attr=0xf, range=[0x0000000000086000-0x0000000000088000) (0MB) [ 0.000000] efi: mem05: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB) [ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000e60000) (13MB) [ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000000e60000-0x00000000374d0000) (870MB) [ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x00000000374d0000-0x0000000037a60000) (5MB) [ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000037a60000-0x00000000533d6000) (441MB) [ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x00000000533d6000-0x000000007127e000) (478MB) [ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x000000007127e000-0x000000007129e000) (0MB) [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x000000007129e000-0x0000000074256000) (47MB) [ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x0000000074256000-0x00000000752b0000) (16MB) [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000752b0000-0x0000000075427000) (1MB) [ 0.000000] efi: mem15: type=1, attr=0xf, range=[0x0000000075427000-0x00000000754bf000) (0MB) [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000754bf000-0x00000000780dc000) (44MB) [ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x00000000780dc000-0x00000000794bf000) (19MB) [ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x00000000794bf000-0x000000007a092000) (11MB) [ 0.000000] efi: mem19: type=2, attr=0xf, range=[0x000000007a092000-0x000000007a09b000) (0MB) [ 0.000000] efi: mem20: type=3, attr=0xf, range=[0x000000007a09b000-0x000000007a4bf000) (4MB) [ 0.000000] efi: mem21: type=5, attr=0x800000000000000f, range=[0x000000007a4bf000-0x000000007a6bf000) (2MB) [ 0.000000] efi: mem22: type=6, attr=0x800000000000000f, range=[0x000000007a6bf000-0x000000007aabf000) (4MB) [ 0.000000] efi: mem23: type=0, attr=0xf, range=[0x000000007aabf000-0x000000007aebf000) (4MB) [ 0.000000] efi: mem24: type=10, attr=0xf, range=[0x000000007aebf000-0x000000007bfbf000) (17MB) [ 0.000000] efi: mem25: type=9, attr=0xf, range=[0x000000007bfbf000-0x000000007bfff000) (0MB) [ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x000000007bfff000-0x000000007c000000) (0MB) [ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x0000000100000000-0x0000000280000000) (6144MB) [ 0.000000] efi: mem28: type=11, attr=0x8000000000000000, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB) [ 0.000000] efi: mem29: type=11, attr=0x8000000000000000, range=[0x00000000fed01000-0x00000000fed02000) (0MB) [ 0.000000] efi: mem30: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x0000000100000000) (4MB) [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Synology Inc. DS216+/Type2 - Board Product Name, BIOS M.616 3/2/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 07E000000 mask FFE000000 uncachable [ 0.000000] 3 base 07D000000 mask FFF000000 uncachable [ 0.000000] 4 base 07C800000 mask FFF800000 uncachable [ 0.000000] 5 base 07C400000 mask FFFC00000 uncachable [ 0.000000] 6 base 100000000 mask F00000000 write-back [ 0.000000] 7 base 200000000 mask F80000000 write-back [ 0.000000] e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff88000007c000] 7c000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x019da000, 0x019dafff] PGTABLE [ 0.000000] BRK [0x019db000, 0x019dbfff] PGTABLE [ 0.000000] BRK [0x019dc000, 0x019dcfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x27fe00000-0x27fffffff] [ 0.000000] [mem 0x27fe00000-0x27fffffff] page 2M [ 0.000000] BRK [0x019dd000, 0x019ddfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x27c000000-0x27fdfffff] [ 0.000000] [mem 0x27c000000-0x27fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x27bffffff] [ 0.000000] [mem 0x200000000-0x27bffffff] page 2M [ 0.000000] BRK [0x019de000, 0x019defff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7a4befff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x7a3fffff] page 2M [ 0.000000] [mem 0x7a400000-0x7a4befff] page 4k [ 0.000000] init_memory_mapping: [mem 0x7bfff000-0x7bffffff] [ 0.000000] [mem 0x7bfff000-0x7bffffff] page 4k [ 0.000000] BRK [0x019df000, 0x019dffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x374d0000-0x37a5ffff] [ 0.000000] ACPI: RSDP 0x000000007BFFE014 00024 (v02 INSYDE) [ 0.000000] ACPI: XSDT 0x000000007BFFE120 00094 (v01 INSYDE INSYDE 00000003 01000013) [ 0.000000] ACPI: FACP 0x000000007BFFA000 0010C (v05 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: DSDT 0x000000007BFE9000 0B0A1 (v02 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: FACS 0x000000007BFBB000 00040 [ 0.000000] ACPI: UEFI 0x000000007BFFD000 00236 (v01 INSYDE INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: UEFI 0x000000007BFFB000 00042 (v01 INSYDE INSYDE 00000000 ACPI 00040000) [ 0.000000] ACPI: APIC 0x000000007BFF9000 00084 (v03 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: MCFG 0x000000007BFF8000 0003C (v01 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: SLIC 0x000000007BFF7000 00176 (v01 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: WDAT 0x000000007BFF6000 001C4 (v01 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: WDRT 0x000000007BFF5000 00047 (v01 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000007BFE8000 00763 (v01 INSYDE CpuPm 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000007BFE7000 00290 (v01 INSYDE Cpu0Tst 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000007BFE6000 0017A (v01 INSYDE ApTst 00003000 ACPI 00040000) [ 0.000000] ACPI: APIC 0x000000007BFE5000 00084 (v03 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: FPDT 0x000000007BFE4000 00044 (v01 INSYDE INSYDE 00000002 ACPI 00040000) [ 0.000000] ACPI: BGRT 0x000000007BFE3000 00038 (v01 INSYDE INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880277600000-ffff88027e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x27fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0006efff] [ 0.000000] node 0: [mem 0x00070000-0x00085fff] [ 0.000000] node 0: [mem 0x00100000-0x7a4befff] [ 0.000000] node 0: [mem 0x7bfff000-0x7bffffff] [ 0.000000] node 0: [mem 0x100000000-0x27fffffff] [ 0.000000] On node 0 totalpages: 2073668 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3972 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6793 pages used for memmap [ 0.000000] DMA32 zone: 496832 pages, LIFO batch:31 [ 0.000000] Normal zone: 21504 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 131 [ 0.000000] PM: Registered nosave memory: 000000000006f000 - 0000000000070000 [ 0.000000] PM: Registered nosave memory: 0000000000086000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000007a4bf000 - 000000007aebf000 [ 0.000000] PM: Registered nosave memory: 000000007aebf000 - 000000007bfbf000 [ 0.000000] PM: Registered nosave memory: 000000007bfbf000 - 000000007bfff000 [ 0.000000] PM: Registered nosave memory: 000000007c000000 - 00000000e00f8000 [ 0.000000] PM: Registered nosave memory: 00000000e00f8000 - 00000000e00f9000 [ 0.000000] PM: Registered nosave memory: 00000000e00f9000 - 00000000fed01000 [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed02000 [ 0.000000] PM: Registered nosave memory: 00000000fed02000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 [ 0.000000] e820: [mem 0x7c000000-0xe00f7fff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88027fc00000 s76864 r8192 d21440 u524288 [ 0.000000] pcpu-alloc: s76864 r8192 d21440 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2045293 [ 0.000000] Kernel command line: root=/dev/md0 ihd_num=2 netif_num=1 HddHotplug=1 SataPortMap=21 DiskIdxMap=0002 acpi_enforce_resources=lax syno_castrated_xhc=0000:00:14.0@0x0c syno_hw_version=DS216+ vender_format_version=2 syno_hdd_detect=56,59,63,57 syno_hdd_enable=61,60,71,58 sn=1620NUN811304 macs=00113258afd4 [ 0.000000] Internal HD num: 2 [ 0.000000] Internal netif num: 1 [ 0.000000] Support HDD Hotplug. [ 0.000000] Sata Port Map: 21 [ 0.000000] Disk Index Map: 0002 [ 0.000000] Synology Hardware Version: DS216+-j [ 0.000000] Vender format version: 2 [ 0.000000] SYNO GPIO hdd detect pin: 56 59 63 57 [ 0.000000] SYNO GPIO hdd enable pin: 61 60 71 58 [ 0.000000] Serial Number: 1620NUN811304 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 8043676k/10485760k available (4872k kernel code, 2191088k absent, 250996k reserved, 3731k data, 772k init) [ 0.000000] Kernel/User page tables isolation: disabled [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:4352 nr_irqs:1024 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] tsc: Fast TSC calibration failed [ 0.002000] tsc: PIT calibration matches PMTIMER. 1 loops [ 0.003000] tsc: Detected 1599.974 MHz processor [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.94 BogoMIPS (lpj=1599974) [ 0.011897] pid_max: default: 32768 minimum: 301 [ 0.017106] init_memory_mapping: [mem 0x7a4bf000-0x7a6befff] [ 0.023446] [mem 0x7a4bf000-0x7a6befff] page 4k [ 0.023470] init_memory_mapping: [mem 0x7a6bf000-0x7aabefff] [ 0.029807] [mem 0x7a6bf000-0x7a7fffff] page 4k [ 0.029811] [mem 0x7a800000-0x7a9fffff] page 2M [ 0.029813] [mem 0x7aa00000-0x7aabefff] page 4k [ 0.030638] Security Framework initialized [ 0.035258] AppArmor: AppArmor initialized [ 0.039869] Mount-cache hash table entries: 256 [ 0.045230] Initializing cgroup subsys memory [ 0.050129] Initializing cgroup subsys devices [ 0.055109] Initializing cgroup subsys freezer [ 0.060087] Initializing cgroup subsys blkio [ 0.064904] CPU: Physical Processor ID: 0 [ 0.069387] CPU: Processor Core ID: 0 [ 0.073483] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.093535] mce: CPU supports 6 MCE banks [ 0.098035] CPU0: Thermal monitoring enabled (TM1) [ 0.103406] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 0 tlb_flushall_shift: 6 [ 0.119165] FEATURE SPEC_CTRL Not Present [ 0.123655] FEATURE IBPB_SUPPORT Not Present [ 0.128437] Spectre V2 : Vulnerable [ 0.132463] Freeing SMP alternatives: 24k freed [ 0.137548] ACPI: Core revision 20130328 [ 0.154259] ACPI: All ACPI Tables successfully acquired [ 0.165075] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.181796] smpboot: CPU0: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz (fam: 06, model: 4c, stepping: 03) [ 0.192362] TSC deadline timer enabled [ 0.192380] Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver. [ 0.201948] ... version: 3 [ 0.206428] ... bit width: 40 [ 0.211004] ... generic registers: 2 [ 0.215484] ... value mask: 000000ffffffffff [ 0.221419] ... max period: 000000007fffffff [ 0.227355] ... fixed-purpose events: 3 [ 0.231834] ... event mask: 0000000700000003 [ 0.238250] smpboot: Booting Node 0, Processors #1 [ 0.262310] Brought up 2 CPUs [ 0.265830] smpboot: Total of 2 processors activated (6399.89 BogoMIPS) [ 0.273696] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.283069] devtmpfs: initialized [ 0.287265] PM: Registering ACPI NVS region [mem 0x0006f000-0x0006ffff] (4096 bytes) [ 0.295934] PM: Registering ACPI NVS region [mem 0x7aebf000-0x7bfbefff] (17825792 bytes) [ 0.305813] xor: measuring software checksum speed [ 0.321193] prefetch64-sse: 5624.000 MB/sec [ 0.336276] generic_sse: 4976.000 MB/sec [ 0.341048] xor: using function: prefetch64-sse (5624.000 MB/sec) [ 0.347862] pinctrl core: initialized pinctrl subsystem [ 0.353834] NET: Registered protocol family 16 [ 0.359700] ACPI: bus type PCI registered [ 0.364395] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.374807] PCI: not using MMCONFIG [ 0.378707] PCI: Using configuration type 1 for base access [ 0.395046] bio: create slab at 0 [ 0.416600] raid6: sse2x1 gen() 714 MB/s [ 0.438416] raid6: sse2x1 xor() 1712 MB/s [ 0.460245] raid6: sse2x2 gen() 1136 MB/s [ 0.482053] raid6: sse2x2 xor() 1964 MB/s [ 0.503877] raid6: sse2x4 gen() 1765 MB/s [ 0.525695] raid6: sse2x4 xor() 1833 MB/s [ 0.530468] raid6: using algorithm sse2x4 gen() (1765 MB/s) [ 0.536696] raid6: .... xor() 1833 MB/s, rmw enabled [ 0.542245] raid6: using ssse3x2 recovery algorithm [ 0.547816] ACPI: Added _OSI(Module Device) [ 0.552503] ACPI: Added _OSI(Processor Device) [ 0.557474] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.562733] ACPI: Added OSI(Processor Aggregator Device) [ 0.572124] ACPI: EC: Look up EC in DSDT [ 0.597652] ACPI: SSDT 0x000000007AEB1698 00633 (v01 PmRef Cpu0Ist 00003000 INTL 20130117) [ 0.607946] ACPI: Dynamic OEM Table Load: [ 0.612448] ACPI: SSDT 0x0000000000000000 00633 (v01 PmRef Cpu0Ist 00003000 INTL 20130117) [ 0.622116] ACPI: SSDT 0x000000007AEB0C18 003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20130117) [ 0.632378] ACPI: Dynamic OEM Table Load: [ 0.636872] ACPI: SSDT 0x0000000000000000 003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20130117) [ 0.652657] ACPI: SSDT 0x000000007AEB2E18 0015F (v01 PmRef ApIst 00003000 INTL 20130117) [ 0.662983] ACPI: Dynamic OEM Table Load: [ 0.667483] ACPI: SSDT 0x0000000000000000 0015F (v01 PmRef ApIst 00003000 INTL 20130117) [ 0.679912] ACPI: SSDT 0x000000007AEB9E18 0008D (v01 PmRef ApCst 00003000 INTL 20130117) [ 0.690190] ACPI: Dynamic OEM Table Load: [ 0.694694] ACPI: SSDT 0x0000000000000000 0008D (v01 PmRef ApCst 00003000 INTL 20130117) [ 0.707719] ACPI: Interpreter enabled [ 0.711842] ACPI: (supports S0 S4 S5) [ 0.715938] ACPI: Using IOAPIC for interrupt routing [ 0.721539] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.734061] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources [ 0.744042] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.754549] ACPI: No dock devices found. [ 0.764566] ACPI: Power Resource [USBC] (on) [ 0.777282] ACPI: Power Resource [ID3C] (off) [ 0.793440] ACPI: Power Resource [FN00] (off) [ 0.799554] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.806594] _SB.PCI0:_OSC invalid UUID [ 0.806598] OSC request data:1 8 0 [ 0.806716] _SB.PCI0:_OSC invalid UUID [ 0.806720] _OSC request data:1 1f 0 [ 0.806729] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.815681] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.824916] acpi PNP0A08:00: host bridge window expanded to [mem 0x80000000-0xdfffffff]; [mem 0x80000000-0xdfffffff] ignored [ 0.837470] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.849341] PCI host bridge to bus 0000:00 [ 0.853941] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.860076] pci_bus 0000:00: root bus resource [io 0x0000-0x006f] [ 0.866987] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7] [ 0.873891] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.880801] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.888488] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.896168] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff] [ 0.903855] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff] [ 0.911554] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000 [ 0.911749] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000 [ 0.911779] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x90ffffff 64bit] [ 0.911795] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.911808] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f] [ 0.912119] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601 [ 0.912188] pci 0000:00:13.0: reg 20: [io 0x3060-0x307f] [ 0.912202] pci 0000:00:13.0: reg 24: [mem 0x91416000-0x914167ff] [ 0.912270] pci 0000:00:13.0: PME# supported from D3hot [ 0.912512] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330 [ 0.912569] pci 0000:00:14.0: reg 10: [mem 0x91400000-0x9140ffff 64bit] [ 0.912671] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.912795] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.919257] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000 [ 0.919286] pci 0000:00:1a.0: reg 10: [mem 0x91300000-0x913fffff] [ 0.919301] pci 0000:00:1a.0: reg 14: [mem 0x91200000-0x912fffff] [ 0.919397] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.919631] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400 [ 0.919743] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.919873] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.926351] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400 [ 0.926463] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.926593] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.933084] pci 0000:00:1e.0: [8086:2286] type 00 class 0x080102 [ 0.933112] pci 0000:00:1e.0: reg 10: [mem 0x91410000-0x91413fff] [ 0.933434] pci 0000:00:1e.4: [8086:228c] type 00 class 0x078000 [ 0.933463] pci 0000:00:1e.4: reg 10: [mem 0x91415000-0x91415fff] [ 0.933788] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100 [ 0.934167] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500 [ 0.934228] pci 0000:00:1f.3: reg 10: [mem 0x91414000-0x9141401f] [ 0.934346] pci 0000:00:1f.3: reg 20: [io 0x3040-0x305f] [ 0.934898] pci 0000:01:00.0: [8086:1539] type 00 class 0x020000 [ 0.934940] pci 0000:01:00.0: reg 10: [mem 0x91100000-0x9111ffff] [ 0.934982] pci 0000:01:00.0: reg 18: [io 0x2000-0x201f] [ 0.935005] pci 0000:01:00.0: reg 1c: [mem 0x91120000-0x91123fff] [ 0.935177] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.935246] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.944610] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.950179] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.950188] pci 0000:00:1c.0: bridge window [mem 0x91100000-0x911fffff] [ 0.950363] pci 0000:02:00.0: [1b4b:9170] type 00 class 0x010601 [ 0.950386] pci 0000:02:00.0: reg 10: [io 0x1018-0x101f] [ 0.950401] pci 0000:02:00.0: reg 14: [io 0x1024-0x1027] [ 0.950416] pci 0000:02:00.0: reg 18: [io 0x1010-0x1017] [ 0.950431] pci 0000:02:00.0: reg 1c: [io 0x1020-0x1023] [ 0.950445] pci 0000:02:00.0: reg 20: [io 0x1000-0x100f] [ 0.950461] pci 0000:02:00.0: reg 24: [mem 0x91000000-0x910001ff] [ 0.950476] pci 0000:02:00.0: reg 30: [mem 0xffff0000-0xffffffff pref] [ 0.950539] pci 0000:02:00.0: PME# supported from D3hot [ 0.950584] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.958945] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.964518] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] [ 0.964527] pci 0000:00:1c.2: bridge window [mem 0x91000000-0x910fffff] [ 0.964551] pcibus 0000:00: on NUMA node 0 [ 0.966441] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.975622] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.984808] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.993999] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 1.003190] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 1.012373] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 1.021564] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 1.030745] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 1.040157] cherryview-pinctrl: Adding GPIO Controller - Pin ranged 0 ~ 55 [ 1.048189] cherryview-pinctrl: Adding GPIO Controller - Pin ranged 56 ~ 114 [ 1.056396] cherryview-pinctrl: Adding GPIO Controller - Pin ranged 115 ~ 138 [ 1.064696] cherryview-pinctrl: Adding GPIO Controller - Pin ranged 139 ~ 193 [ 1.073308] ACPI: Enabled 6 GPEs in block 00 to 3F [ 1.078707] acpi root: _SB.PCI0 notify handler is installed [ 1.078842] Found 1 acpi root devices [ 1.079226] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.088284] vgaarb: loaded [ 1.091326] vgaarb: bridge control possible 0000:00:02.0 [ 1.097598] SCSI subsystem initialized [ 1.101815] ACPI: bus type ATA registered [ 1.106558] libata version 3.00 loaded. [ 1.106834] pps_core: LinuxPPS API ver. 1 registered [ 1.112406] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 1.122688] PTP clock support registered [ 1.127333] EFI Variables Facility v0.08 2004-May-17 [ 1.147146] Registered efi as persistent store backend [ 1.152915] PCI: Using ACPI for IRQ routing [ 1.160230] PCI: pci_cache_line_size set to 64 bytes [ 1.160308] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff] [ 1.160313] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff] [ 1.160316] e820: reserve RAM buffer [mem 0x7a4bf000-0x7bffffff] [ 1.160910] Switching to clocksource refined-jiffies [ 1.166619] AppArmor: AppArmor Filesystem Enabled [ 1.171985] pnp: PnP ACPI init [ 1.175413] ACPI: bus type PNP registered [ 1.180036] pnp 00:00: Plug and Play ACPI device, IDs INT0800 (active) [ 1.180177] system 00:01: [io 0x0680-0x069f] has been reserved [ 1.186807] system 00:01: [io 0x0400-0x047f] could not be reserved [ 1.193819] system 00:01: [io 0x0500-0x05fe] has been reserved [ 1.200440] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.200662] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.202989] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.203234] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved [ 1.211029] system 00:04: [mem 0xfea00000-0xfeafffff] has been reserved [ 1.218420] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved [ 1.225818] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved [ 1.233214] system 00:04: [mem 0xfed06000-0xfed06fff] has been reserved [ 1.240612] system 00:04: [mem 0xfed08000-0xfed09fff] has been reserved [ 1.248008] system 00:04: [mem 0xfed80000-0xfedbffff] could not be reserved [ 1.255785] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 1.263183] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 1.270580] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.270915] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.271193] pnp: PnP ACPI: found 6 devices [ 1.275780] ACPI: bus type PNP unregistered [ 1.292958] Switching to clocksource acpi_pm [ 1.297760] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 1.307462] pci 0000:00:1c.2: BAR 15: assigned [mem 0x91500000-0x915fffff pref] [ 1.315649] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.321212] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 1.328037] pci 0000:00:1c.0: bridge window [mem 0x91100000-0x911fffff] [ 1.335645] pci 0000:02:00.0: BAR 6: assigned [mem 0x91500000-0x9150ffff pref] [ 1.343719] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 1.349277] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] [ 1.356102] pci 0000:00:1c.2: bridge window [mem 0x91000000-0x910fffff] [ 1.363701] pci 0000:00:1c.2: bridge window [mem 0x91500000-0x915fffff pref] [ 1.372104] pci_bus 0000:00: resource 4 [io 0x0000-0x006f] [ 1.372110] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7] [ 1.372114] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff] [ 1.372119] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] [ 1.372123] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff] [ 1.372127] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff] [ 1.372132] pci_bus 0000:00: resource 10 [mem 0x80000000-0xdfffffff] [ 1.372136] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 1.372140] pci_bus 0000:01: resource 1 [mem 0x91100000-0x911fffff] [ 1.372145] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 1.372149] pci_bus 0000:02: resource 1 [mem 0x91000000-0x910fffff] [ 1.372153] pci_bus 0000:02: resource 2 [mem 0x91500000-0x915fffff pref] [ 1.372226] NET: Registered protocol family 2 [ 1.377490] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.386085] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.394003] TCP: Hash tables configured (established 65536 bind 65536) [ 1.401388] TCP: reno registered [ 1.405025] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.411907] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.419395] NET: Registered protocol family 1 [ 1.424472] RPC: Registered named UNIX socket transport module. [ 1.431113] RPC: Registered udp transport module. [ 1.436370] RPC: Registered tcp transport module. [ 1.441647] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.448875] pci 0000:00:02.0: Boot video device [ 1.450766] pci 0000:02:00.0: Apply mv9170 specific programming steps [ 1.457986] PCI: CLS 64 bytes, default 64 [ 1.912038] Trying to unpack rootfs image as initramfs... [ 4.284504] decompress cpio completed and skip redundant lzma [ 4.291570] Freeing initrd memory: 5696k freed [ 4.298803] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 4.306028] software IO TLB [mem 0x6d27e000-0x7127e000] (64MB) mapped at [ffff88006d27e000-ffff88007127dfff] [ 4.345319] Initialise module verification [ 4.350015] audit: initializing netlink socket (disabled) [ 4.356100] type=2000 audit(1617614200.929:1): initialized [ 4.372784] bounce pool size: 64 pages [ 4.382599] VFS: Disk quotas dquot_6.5.2 [ 4.387052] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 4.394709] NFS: Registering the id_resolver key type [ 4.400401] Key type id_resolver registered [ 4.405085] Key type id_legacy registered [ 4.409599] msgmni has been set to 15802 [ 4.414505] Key type asymmetric registered [ 4.419113] Asymmetric key parser 'x509' registered [ 4.424800] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 4.433082] io scheduler noop registered [ 4.437472] io scheduler deadline registered [ 4.442273] io scheduler cfq registered (default) [ 5.317680] tsc: Refined TSC clocksource calibration: 1599.947 MHz [ 5.324638] Switching to clocksource tsc [ 6.368942] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 6.397985] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 6.417846] 0000:00:1e.4: ttyS1 at MMIO 0x91415000 (irq = 19) is a 16550A [ 6.621772] brd: module loaded [ 6.631707] Loading iSCSI transport class v2.0-870. [ 6.694953] ahci 0000:00:13.0: version 3.0 [ 6.695205] ahci 0000:00:13.0: irq 131 for MSI/MSI-X [ 6.695300] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 6.704369] ahci 0000:00:13.0: flags: 64bit ncq led clo only pio slum part deso sadm sds apst [ 6.714009] ahci 0000:00:13.0: setting latency timer to 64 [ 6.729235] scsi0 : ahci [ 6.742643] scsi1 : ahci [ 6.750395] ata1: SATA max UDMA/133 abar m2048@0x91416000 port 0x91416100 irq 131 [ 6.758793] ata2: SATA max UDMA/133 abar m2048@0x91416000 port 0x91416180 irq 131 [ 15.131322] ata1: link is slow to respond, please be patient (ready=0) [ 18.606211] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 18.613804] ata1.00: ATA-8: ST3000DM001-9YN166, CC4B, max UDMA/133 [ 18.620731] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 18.628711] ata1.00: SN: W1F10S39 [ 18.634090] ata1.00: configured for UDMA/133 [ 18.639399] scsi 0:0:0:0: Direct-Access ATA ST3000DM001-9YN166 CC4B PQ: 0 ANSI: 5 [ 18.651119] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 18.659793] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 18.667220] Delay 5 seconds to wait for disk 2 ready. [ 18.668457] sd 0:0:0:0: [sda] Write Protect is off [ 18.668462] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 18.668513] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 18.713599] sda: sda1 sda2 sda5 [ 18.756254] sd 0:0:0:0: [sda] Attached SCSI disk [ 32.052756] ata2: link is slow to respond, please be patient (ready=0) [ 36.700599] ata2: COMRESET failed (errno=-16) [ 36.705474] ata2: COMRESET fail, set COMRESET fail flag [ 37.017600] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 37.024518] ata2: link reset sucessfully clear error flags [ 37.077425] ata2.00: ATA-10: ST8000DM004-2CX188, 0001, max UDMA/133 [ 37.084446] ata2.00: 15628053168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 37.092522] ata2.00: SN: ZCT0E6CM [ 37.148152] ata2.00: configured for UDMA/133 [ 37.156096] scsi 1:0:0:0: Direct-Access ATA ST8000DM004-2CX188 0001 PQ: 0 ANSI: 5 [ 37.167815] sd 1:0:0:0: [sdb] 15628053168 512-byte logical blocks: (8.00 TB/7.27 TiB) [ 37.176585] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 37.180506] ahci 0000:02:00.0: irq 132 for MSI/MSI-X [ 37.180534] ahci 0000:02:00.0: controller can't do NCQ, turning off CAP_NCQ [ 37.180563] Change defer qc mode on external port for compatibility [ 37.180611] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 37.180617] ahci 0000:02:00.0: flags: 64bit sntf led only pmp fbs pio slum part sxs [ 37.215083] sd 1:0:0:0: [sdb] Write Protect is off [ 37.220451] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 37.220507] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 37.223859] scsi2 : ahci [ 37.230640] ata3: FORCE: PHY spd limit set to 3.0 Gbps [ 37.230644] ata3: SATA max UDMA/133 abar m512@0x91000000 port 0x91000100 irq 132 [ 37.306612] sdb: sdb1 sdb2 sdb5 [ 37.314119] sd 1:0:0:0: [sdb] Attached SCSI disk [ 37.535589] ata3: SATA link down (SStatus 0 SControl 320) [ 37.541642] ata3: Disk is present for SATA link down event [ 37.571130] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 38.641749] i8042: No controller found [ 38.645994] rtc_cmos 00:05: RTC can wake from S4 [ 38.651656] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 38.658543] rtccmos 00:05: alarms up to one month, y3k, 242 bytes nvram [ 38.666397] i2c /dev entries driver [ 38.671930] ACPI Warning: 0x0000000000003040-0x000000000000305F SystemIO conflicts with Region _SB.PCI0.SBUS.SMBI 1 (20130328/utaddress-249) [ 38.686298] ACPI: This conflict may cause random problems and system instability [ 38.694577] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 38.712728] md: linear personality registered for level -1 [ 38.718884] md: raid0 personality registered for level 0 [ 38.724820] md: raid1 personality registered for level 1 [ 38.730769] md: raid10 personality registered for level 10 [ 38.738610] md: raid6 personality registered for level 6 [ 38.744566] md: raid5 personality registered for level 5 [ 38.750530] md: raid4 personality registered for level 4 [ 38.756703] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com [ 38.766143] cpuidle: using governor ladder [ 38.770732] cpuidle: using governor menu [ 38.775290] TCP: cubic registered [ 38.779003] NET: Registered protocol family 17 [ 38.784019] Key type dns_resolver registered [ 38.800785] Loading module verification blacklist certificates [ 38.807329] Loading module verification certificates [ 38.812947] MODSIGN: Loaded cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' [ 38.827236] MODSIGN: Loaded cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' [ 38.838845] MODSIGN: Loaded cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' [ 38.852110] MODSIGN: Loaded cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' [ 38.863407] registered taskstats version 1 [ 38.868662] rtc_cmos 00:05: setting system clock to 2021-04-05 09:17:17 UTC (1617614237) [ 38.879131] Freeing unused kernel memory: 772k freed [ 38.884942] Write protecting the kernel read-only data: 8192k [ 38.891648] Freeing unused kernel memory: 1260k freed [ 38.900151] Freeing unused kernel memory: 504k freed [ 39.028531] ACPI: bus type USB registered [ 39.033378] usbcore: registered new interface driver usbfs [ 39.041557] usbcore: registered new interface driver hub [ 39.048441] usbcore: registered new interface driver ethub [ 39.054763] usbcore: registered new device driver usb [ 39.108659] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 39.108673] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 39.114535] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 39.322978] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 39.323018] xhci_hcd 0000:00:14.0: irq 133 for MSI/MSI-X [ 39.323435] xHCI xhci_add_endpoint called for root hub [ 39.323439] xHCI xhci_check_bandwidth called for root hub [ 39.323661] hub 1-0:1.0: USB hub found [ 39.327889] hub 1-0:1.0: 7 ports detected [ 39.333413] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 39.339265] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 39.347892] xHCI xhci_add_endpoint called for root hub [ 39.347896] xHCI xhci_check_bandwidth called for root hub [ 39.348094] hub 2-0:1.0: USB hub found [ 39.352316] hub 2-0:1.0: 6 ports detected [ 39.357060] port3: is a castrated xHC-port [ 39.361910] port4: is a castrated xHC-port [ 39.430044] braswell_synobios: module license 'Synology Inc.' taints kernel. [ 39.437935] Disabling lock debugging due to kernel taint [ 39.444704] ttyS1 - failed to request DMA [ 39.449302] 2021-4-5 9:17:18 UTC [ 39.452928] synobios: load, major number 201 [ 39.457716] Brand: Synology [ 39.460868] Model: DS-216+ [ 39.463910] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 39.473364] synobios cpu_arch proc entry initialized [ 39.478921] synobios crypto_hw proc entry initialized [ 39.484572] synobios syno_platform proc entry initialized [ 39.490627] synobios open /dev/ttyS1 success [ 39.507296] synobios: unload [ 39.527458] md: Autodetecting RAID arrays. [ 39.578171] md: invalid raid superblock magic on sda5 [ 39.583835] md: sda5 does not have a valid v0.90 superblock, not importing! [ 39.660104] md: invalid raid superblock magic on sdb5 [ 39.665757] md: sdb5 does not have a valid v0.90 superblock, not importing! [ 39.673557] md: Scanned 6 and added 4 devices. [ 39.678534] md: autorun ... [ 39.681660] md: considering sda1 ... [ 39.685665] md: adding sda1 ... [ 39.689280] md: sda2 has different UUID to sda1 [ 39.694351] md: adding sdb1 ... [ 39.697962] md: sdb2 has different UUID to sda1 [ 39.703042] md: created md0 [ 39.706166] md: bind [ 39.709218] md: bind [ 39.712260] md: running: [ 39.716714] md/raid1:md0: active with 2 out of 2 mirrors [ 39.776476] md0: detected capacity change from 0 to 2549940224 [ 39.783195] md: considering sda2 ... [ 39.787208] md: adding sda2 ... [ 39.790825] md: adding sdb2 ... [ 39.795222] md: created md1 [ 39.798365] md: bind [ 39.801415] md: bind [ 39.804462] md: running: [ 39.816536] md/raid1:md1: active with 2 out of 2 mirrors [ 39.856359] md1: detected capacity change from 0 to 2147418112 [ 39.863129] md: ... autorun DONE. [ 39.909331] md0: unknown partition table [ 40.656481] usb 1-4: new high-speed USB device number 2 using xhci_hcd [ 40.690301] Got empty serial number. Generate serial number from product. [ 40.699426] hub 1-4:1.0: USB hub found [ 40.704824] hub 1-4:1.0: 4 ports detected [ 41.651290] EXT4-fs (md0): barriers disabled [ 41.663811] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: [ 41.839453] usb 1-5: new high-speed USB device number 3 using xhci_hcd [ 43.078434] usb 1-4.1: new high-speed USB device number 4 using xhci_hcd [ 44.210101] usb 1-4.2: new low-speed USB device number 5 using xhci_hcd [ 44.240585] usb 1-4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 45.363114] usb 1-4.3: new high-speed USB device number 6 using xhci_hcd [ 46.610344] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 51.628163] usb 2-2: device descriptor read/8, error -110 [ 51.735101] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 51.763548] usb 2-2: device descriptor read/8, error -71 [ 53.769526] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [ 54.923107] EXT4-fs (md0): re-mounted. Opts: (null) [ 58.935959] usb 2-2: new SuperSpeed USB device number 4 using xhci_hcd [ 60.296583] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 60.302687] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 60.701029] md1: unknown partition table [ 60.844684] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k [ 63.953750] usb 2-2: device descriptor read/8, error -110 [ 64.060698] usb 2-2: new SuperSpeed USB device number 4 using xhci_hcd [ 64.089174] usb 2-2: device descriptor read/8, error -71 [ 64.932218] NET: Registered protocol family 10 [ 64.981915] sit: IPv6 over IPv4 tunneling driver [ 65.550476] init: syno-auth-check main process (4546) killed by TERM signal [ 66.102405] ACPI: Requesting acpi_cpufreq [ 66.113698] Monitor-Mwait will be used to enter C-1 state [ 66.790757] fuse init (API version 7.22) [ 66.848905] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI [ 66.855737] e1000e: Copyright(c) 1999 - 2016 Intel Corporation. [ 66.901697] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.3 [ 66.909010] Copyright (c) 2007-2015 Intel Corporation. [ 66.915395] igb 0000:01:00.0: irq 134 for MSI/MSI-X [ 66.915410] igb 0000:01:00.0: irq 135 for MSI/MSI-X [ 66.958560] igb 0000:01:00.0: added PHC on eth0 [ 66.963665] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 66.971400] igb 0000:01:00.0: eth0: (PCIe:2.5GT/s:Width x1) [ 66.977763] igb 0000:01:00.0 eth0: MAC: 12:34:56:78:9a:bc [ 66.983831] igb 0000:01:00.0: eth0: PBA No: Unknown [ 66.989323] igb 0000:01:00.0: LRO is disabled [ 66.994211] igb 0000:01:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) [ 67.012576] systemd-udevd[4979]: starting version 204 [ 67.062804] Loading modules backported from Linux version v3.18.1-0-g39ca484 [ 67.070719] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c [ 67.646464] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 67.655633] ACPI: Power Button [PWR2] [ 67.659811] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 67.668963] ACPI: Sleep Button [SLPB] [ 67.673131] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 67.681407] ACPI: Power Button [PWRF] [ 67.930547] Linux agpgart interface v0.103 [ 68.089057] [drm] Initialized drm 1.1.0 20060810 [ 68.415283] [drm] Memory usable by graphics device = 2048M [ 68.421459] i915 0000:00:02.0: setting latency timer to 64 [ 68.422001] mtrr: no more MTRRs available [ 68.426491] [drm] MTRR allocation failed. Graphics performance may suffer. [ 68.445688] i915 0000:00:02.0: irq 136 for MSI/MSI-X [ 68.445714] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 68.453135] [drm] Driver supports precise vblank timestamp query. [ 68.498701] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 68.614977] acpi device:28: registered as cooling_device2 [ 68.621083] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 68.628854] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 68.638922] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0 [ 68.691560] [drm] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3 [ 68.740572] i915 0000:00:02.0: No connectors reported connected with modes [ 68.748306] [drm] Cannot find any crtc or sizes - going 1024x768 [ 69.114179] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 69.121115] i915 0000:00:02.0: registered panic notifier [ 69.219206] bio: create slab at 1 [ 69.270578] Btrfs loaded [ 69.308074] exFAT: Version 1.2.9 [ 69.772271] 2021-4-5 9:17:48 UTC [ 69.775895] synobios: load, major number 201 [ 69.780683] Brand: Synology [ 69.783833] Model: DS-216+ [ 69.786865] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 69.796319] synobios cpu_arch proc entry initialized [ 69.801876] synobios crypto_hw proc entry initialized [ 69.807530] synobios syno_platform proc entry initialized [ 69.813590] synobios open /dev/ttyS1 success [ 71.214548] usb 2-2: new SuperSpeed USB device number 6 using xhci_hcd [ 71.642854] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 71.692998] igb 0000:01:00.0: changing MTU from 1500 to 3000 [ 71.793742] ip_tables: (C) 2000-2006 Netfilter Core Team [ 71.853256] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 72.157452] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 72.698870] md: md2 stopped. [ 72.766489] md: bind [ 72.820475] md/raid1:md2: active with 1 out of 1 mirrors [ 72.855168] md2: detected capacity change from 0 to 2995645906944 [ 72.885341] md2: unknown partition table [ 72.897592] md: md3 stopped. [ 72.914703] md: bind [ 72.954466] md/raid1:md3: active with 1 out of 1 mirrors [ 72.984960] md3: detected capacity change from 0 to 7996616146944 [ 73.006061] md3: unknown partition table [ 73.990994] bio: create slab at 2 [ 74.474297] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 74.493867] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 76.232374] usb 2-2: device descriptor read/8, error -110 [ 76.339301] usb 2-2: new SuperSpeed USB device number 6 using xhci_hcd [ 76.371823] usb 2-2: device descriptor read/8, error -71 [ 76.877326] BTRFS: device label 2019.02.23-08:34:40 v23824 devid 1 transid 4270030 /dev/vg1001/lv [ 76.917660] BTRFS info (device dm-1): enabling auto syno reclaim space [ 76.924996] BTRFS info (device dm-1): using free space tree [ 76.931257] BTRFS: has skinny extents [ 77.050978] BTRFS: device label 2016.05.21-20:09:57 v7321 devid 1 transid 1273829 /dev/vg1000/lv [ 77.063491] BTRFS info (device dm-0): enabling auto syno reclaim space [ 77.070806] BTRFS: has skinny extents [ 79.346940] usb 1-4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 83.733930] usb 2-2: new SuperSpeed USB device number 8 using xhci_hcd [ 88.796921] usb 2-2: device descriptor read/8, error -110 [ 88.903889] usb 2-2: new SuperSpeed USB device number 8 using xhci_hcd [ 88.932184] usb 2-2: device descriptor read/8, error -71 [ 96.063930] usb 2-2: new SuperSpeed USB device number 10 using xhci_hcd [ 96.456923] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 96.521597] ehci-pci: EHCI PCI platform driver [ 96.742017] uhci_hcd: USB Universal Host Controller Interface driver [ 96.859950] usb-storage 1-5:1.0: USB Mass Storage device detected [ 96.867464] scsi3 : usb-storage 1-5:1.0 [ 96.871899] usb-storage 1-4.1:1.0: USB Mass Storage device detected [ 96.879241] scsi4 : usb-storage 1-4.1:1.0 [ 96.883849] usb-storage 1-4.3:1.0: USB Mass Storage device detected [ 96.900275] scsi5 : usb-storage 1-4.3:1.0 [ 96.904944] usbcore: registered new interface driver usb-storage [ 97.355144] usbcore: registered new interface driver usblp [ 97.641118] usbcore: registered new interface driver usbhid [ 97.647393] usbhid: USB HID core driver [ 97.875782] scsi 3:0:0:0: Direct-Access Synology DiskStation PMAP PQ: 0 ANSI: 6 [ 97.888325] sd 3:0:0:0: [synoboot] 245760 512-byte logical blocks: (125 MB/120 MiB) [ 97.889843] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 97.903594] scsi 4:0:0:0: Direct-Access WD Elements 25A3 1021 PQ: 0 ANSI: 6 [ 97.913898] sd 3:0:0:0: [synoboot] Write Protect is off [ 97.918297] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 97.925730] sd 3:0:0:0: [synoboot] Mode Sense: 23 00 00 00 [ 97.927396] scsi 5:0:0:0: Direct-Access WD My Book 1140 1019 PQ: 0 ANSI: 6 [ 97.937348] sd 3:0:0:0: [synoboot] No Caching mode page found [ 97.943838] sd 3:0:0:0: [synoboot] Assuming drive cache: write through [ 97.946692] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 97.951231] sd 4:0:0:0: [sdq] Very big device. Trying to use READ CAPACITY(16). [ 97.965407] sd 4:0:0:0: [sdq] 15627986944 512-byte logical blocks: (8.00 TB/7.27 TiB) [ 97.974216] sd 4:0:0:0: [sdq] 4096-byte physical blocks [ 97.982677] scsi 5:0:0:1: Enclosure WD SES Device 1019 PQ: 0 ANSI: 6 [ 97.993340] sd 3:0:0:0: [synoboot] No Caching mode page found [ 97.999852] sd 3:0:0:0: [synoboot] Assuming drive cache: write through [ 98.000341] sd 4:0:0:0: [sdq] Write Protect is off [ 98.000346] sd 4:0:0:0: [sdq] Mode Sense: 47 00 10 08 [ 98.000435] scsi 5:0:0:1: Attached scsi generic sg5 type 13 [ 98.018952] sd 5:0:0:0: [sdr] 732558336 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 98.028106] sd 4:0:0:0: [sdq] No Caching mode page found [ 98.034093] sd 4:0:0:0: [sdq] Assuming drive cache: write through [ 98.034141] synoboot: synoboot1 synoboot2 [ 98.046415] sd 4:0:0:0: [sdq] Very big device. Trying to use READ CAPACITY(16). [ 98.057402] sd 3:0:0:0: [synoboot] No Caching mode page found [ 98.063865] sd 3:0:0:0: [synoboot] Assuming drive cache: write through [ 98.071239] sd 3:0:0:0: [synoboot] Attached SCSI disk [ 98.073039] sd 5:0:0:0: [sdr] Write Protect is off [ 98.073044] sd 5:0:0:0: [sdr] Mode Sense: 47 00 10 08 [ 98.082407] sd 5:0:0:0: [sdr] No Caching mode page found [ 98.088378] sd 5:0:0:0: [sdr] Assuming drive cache: write through [ 98.099579] sd 5:0:0:0: [sdr] 732558336 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 98.099583] sd 4:0:0:0: [sdq] No Caching mode page found [ 98.099589] sd 4:0:0:0: [sdq] Assuming drive cache: write through [ 98.134401] sd 5:0:0:0: [sdr] No Caching mode page found [ 98.140391] sd 5:0:0:0: [sdr] Assuming drive cache: write through [ 99.325810] Syno_HddMon: Initialization completed. [ 99.597605] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(00113258afd4). [ 99.694274] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized [ 99.801304] iSCSI:target_core_device.c:617:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 99.814800] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully [ 100.023481] iSCSI:target_core_file.c:146:fd_attach_hba RODSP plugin for fileio is enabled. [ 100.032749] iSCSI:target_core_file.c:153:fd_attach_hba ODX Token Manager is enabled. [ 100.042136] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled. [ 100.052189] iSCSI:target_core_ep.c:786:ep_attach_hba RODSP plugin for epio is enabled. [ 100.061059] iSCSI:target_core_ep.c:793:ep_attach_hba ODX Token Manager is enabled. [ 101.081535] usb 2-2: device descriptor read/8, error -110 [ 101.188490] usb 2-2: new SuperSpeed USB device number 10 using xhci_hcd [ 101.216822] usb 2-2: device descriptor read/8, error -71 [ 104.756439] FAT-fs (synoboot2): fat_set_state: set=1 process=synopkicompatsy pid=10760 [ 104.794941] FAT-fs (synoboot2): fat_set_state: set=0 process=synopkicompatsy pid=10760 [ 108.337329] usb 2-2: new SuperSpeed USB device number 12 using xhci_hcd [ 108.637871] sdr: sdr1 [ 108.642704] sd 5:0:0:0: [sdr] 732558336 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 108.668225] sd 5:0:0:0: [sdr] No Caching mode page found [ 108.674184] sd 5:0:0:0: [sdr] Assuming drive cache: write through [ 108.681021] sd 5:0:0:0: [sdr] Attached SCSI disk [ 108.774874] warning: nginx' uses 32-bit capabilities (legacy support in use) [ 108.775913] warning:nginx' uses 32-bit capabilities (legacy support in use) [ 109.908944] loop: module loaded [ 113.355117] usb 2-2: device descriptor read/8, error -110 [ 113.462067] usb 2-2: new SuperSpeed USB device number 12 using xhci_hcd [ 113.490815] usb 2-2: device descriptor read/8, error -71 [ 117.388223] sdq: sdq1 [ 117.392618] sd 4:0:0:0: [sdq] Very big device. Trying to use READ CAPACITY(16). [ 117.563026] sd 4:0:0:0: [sdq] No Caching mode page found [ 117.568994] sd 4:0:0:0: [sdq] Assuming drive cache: write through [ 117.575832] sd 4:0:0:0: [sdq] Attached SCSI disk [ 119.139148] ata1.00: configured for UDMA/133 [ 119.143940] ata1: EH complete [ 120.615898] usb 2-2: new SuperSpeed USB device number 14 using xhci_hcd [ 120.629536] ata2.00: configured for UDMA/133 [ 120.634357] ata2: EH complete [ 125.637717] usb 2-2: device descriptor read/8, error -110 [ 125.744660] usb 2-2: new SuperSpeed USB device number 14 using xhci_hcd [ 125.773225] usb 2-2: device descriptor read/8, error -71 [ 132.937529] usb 2-2: new SuperSpeed USB device number 16 using xhci_hcd [ 133.442610] r8152: module verification failed: signature and/or required key missing - tainting kernel [ 133.453602] usbcore: registered new interface driver r8152 [ 137.956344] usb 2-2: device descriptor read/8, error -110 [ 138.063363] usb 2-2: new SuperSpeed USB device number 16 using xhci_hcd [ 138.091934] usb 2-2: device descriptor read/8, error -71 [ 145.268106] usb 2-2: new SuperSpeed USB device number 18 using xhci_hcd [ 150.285912] usb 2-2: device descriptor read/8, error -110 [ 150.392859] usb 2-2: new SuperSpeed USB device number 18 using xhci_hcd [ 150.433851] usb 2-2: device descriptor read/8, error -71 [ 150.737236] aufs 3.10.x-20141110 [ 151.019257] Bridge firewalling registered [ 153.296795] init: synoscheduler-vmtouch main process (3940) killed by TERM signal [ 157.643680] usb 2-2: new SuperSpeed USB device number 20 using xhci_hcd [ 162.661507] usb 2-2: device descriptor read/8, error -110 [ 162.768431] usb 2-2: new SuperSpeed USB device number 20 using xhci_hcd [ 162.798450] usb 2-2: device descriptor read/8, error -71 [ 163.258534] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 167.424168] device docker36de10e entered promiscuous mode [ 167.436987] IPv6: ADDRCONF(NETDEV_UP): docker36de10e: link is not ready [ 169.921260] usb 2-2: new SuperSpeed USB device number 22 using xhci_hcd [ 173.220372] init: synoscheduler-vmtouch main process (14515) killed by TERM signal [ 174.939059] usb 2-2: device descriptor read/8, error -110 [ 175.046028] usb 2-2: new SuperSpeed USB device number 22 using xhci_hcd [ 175.075429] usb 2-2: device descriptor read/8, error -71 [ 175.178035] cgroup: runc (15441) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 176.970994] IPv6: ADDRCONF(NETDEV_CHANGE): docker36de10e: link becomes ready [ 176.978925] docker0: port 1(docker36de10e) entered forwarding state [ 176.985968] docker0: port 1(docker36de10e) entered forwarding state [ 176.993640] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready [ 182.198871] usb 2-2: new SuperSpeed USB device number 24 using xhci_hcd [ 183.125463] init: synoscheduler-vmtouch main process (15357) killed by TERM signal [ 185.850341] init: synoscheduler-vmtouch main process (15738) killed by TERM signal [ 187.216665] usb 2-2: device descriptor read/8, error -110 [ 187.323636] usb 2-2: new SuperSpeed USB device number 24 using xhci_hcd [ 187.352051] usb 2-2: device descriptor read/8, error -71 [ 191.476011] init: synoscheduler-vmtouch main process (16065) killed by TERM signal [ 191.995467] docker0: port 1(docker36de10e) entered forwarding state [ 194.093111] init: synoscheduler-vmtouch main process (16430) killed by TERM signal [ 194.574473] usb 2-2: new SuperSpeed USB device number 26 using xhci_hcd [ 197.105528] init: synoscheduler-vmtouch main process (16600) killed by TERM signal [ 198.301107] init: synoscheduler-vmtouch main process (16801) killed by TERM signal [ 199.592584] usb 2-2: device descriptor read/8, error -110 [ 199.699216] usb 2-2: new SuperSpeed USB device number 26 using xhci_hcd [ 199.729185] usb 2-2: device descriptor read/8, error -71 [ 200.014317] init: synoscheduler-vmtouch main process (16868) killed by TERM signal [ 201.079661] init: synoscheduler-vmtouch main process (17025) killed by TERM signal [ 206.852088] usb 2-2: new SuperSpeed USB device number 28 using xhci_hcd [ 211.890883] usb 2-2: device descriptor read/8, error -110 [ 211.997848] usb 2-2: new SuperSpeed USB device number 28 using xhci_hcd [ 212.028310] usb 2-2: device descriptor read/8, error -71 [ 213.201236] init: synocontentextractd main process ended, respawning [ 219.226653] usb 2-2: new SuperSpeed USB device number 30 using xhci_hcd [ 224.244443] usb 2-2: device descriptor read/8, error -110 [ 224.351410] usb 2-2: new SuperSpeed USB device number 30 using xhci_hcd [ 224.380285] usb 2-2: device descriptor read/8, error -71 [ 230.724022] perf interrupt took too long (2508 > 5000), lowering kernel.perf_event_max_sample_rate to 50000 [ 231.504266] usb 2-2: new SuperSpeed USB device number 32 using xhci_hcd [ 236.522051] usb 2-2: device descriptor read/8, error -110 [ 236.629083] usb 2-2: new SuperSpeed USB device number 32 using xhci_hcd [ 236.657444] usb 2-2: device descriptor read/8, error -71 [ 243.782842] usb 2-2: new SuperSpeed USB device number 34 using xhci_hcd [ 248.800661] usb 2-2: device descriptor read/8, error -110 [ 248.907591] usb 2-2: new SuperSpeed USB device number 34 using xhci_hcd [ 248.939605] usb 2-2: device descriptor read/8, error -71 [ 256.061424] usb 2-2: new SuperSpeed USB device number 36 using xhci_hcd [ 261.079250] usb 2-2: device descriptor read/8, error -110 [ 261.186188] usb 2-2: new SuperSpeed USB device number 36 using xhci_hcd [ 261.214687] usb 2-2: device descriptor read/8, error -71 [ 268.339018] usb 2-2: new SuperSpeed USB device number 38 using xhci_hcd [ 273.356833] usb 2-2: device descriptor read/8, error -110 [ 273.463781] usb 2-2: new SuperSpeed USB device number 38 using xhci_hcd [ 273.493198] usb 2-2: device descriptor read/8, error -71 [ 280.616606] usb 2-2: new SuperSpeed USB device number 40 using xhci_hcd [ 285.634414] usb 2-2: device descriptor read/8, error -110 [ 285.741362] usb 2-2: new SuperSpeed USB device number 40 using xhci_hcd [ 285.769671] usb 2-2: device descriptor read/8, error -71 [ 292.894220] usb 2-2: new SuperSpeed USB device number 42 using xhci_hcd [ 297.913006] usb 2-2: device descriptor read/8, error -110 [ 298.019953] usb 2-2: new SuperSpeed USB device number 42 using xhci_hcd [ 298.048299] usb 2-2: device descriptor read/8, error -71 [ 305.172795] usb 2-2: new SuperSpeed USB device number 44 using xhci_hcd [ 310.190613] usb 2-2: device descriptor read/8, error -110 [ 310.297565] usb 2-2: new SuperSpeed USB device number 44 using xhci_hcd [ 310.330578] usb 2-2: device descriptor read/8, error -71 [ 317.450386] usb 2-2: new SuperSpeed USB device number 46 using xhci_hcd [ 322.468197] usb 2-2: device descriptor read/8, error -110 [ 322.575147] usb 2-2: new SuperSpeed USB device number 46 using xhci_hcd [ 327.593023] usb 2-2: device descriptor read/8, error -110 [ 335.588814] usb 2-2: new SuperSpeed USB device number 48 using xhci_hcd [ 335.606958] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted. [ 335.744973] usb 2-2: reset SuperSpeed USB device number 48 using xhci_hcd [ 335.762894] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted. [ 335.773143] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcec0 [ 335.783268] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf00 [ 335.793391] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf40 [ 335.891932] netif_napi_add() called with weight 256 on device eth%d [ 335.903910] r8152 2-2:1.0 eth1: v2.14.0 (2020/09/24) [ 335.909482] r8152 2-2:1.0 eth1: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.

[ 338.746276] init: nmbd main process (20635) killed by TERM signal [ 338.788241] init: scsi_plugin_server main process (10519) killed by TERM signal [ 430.534884] usbcore: deregistering interface driver r8152 [ 443.310894] usb 2-2: reset SuperSpeed USB device number 48 using xhci_hcd [ 443.328890] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted. [ 443.339129] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcec0 [ 443.349254] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf00 [ 443.359380] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf40 [ 443.921713] r8152 2-2:1.0 (unregistered net_device): set_registers -110 [ 443.978939] r8152 2-2:1.0 eth1: v2.14.0 (2020/09/24) [ 443.984517] r8152 2-2:1.0 eth1: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.

[ 444.002009] usbcore: registered new interface driver r8152 [ 444.131916] usb 2-2: reset SuperSpeed USB device number 48 using xhci_hcd [ 444.149972] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted. [ 444.160518] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcec0 [ 444.170656] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf00 [ 444.180776] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf40 [ 449.084093] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 449.366320] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 449.375424] r8152 2-2:1.0 eth1: carrier on [ 452.415504] init: nmbd main process (23570) killed by TERM signal [ 452.572490] init: scsi_plugin_server main process (20679) killed by TERM signal [ 454.991982] init: iscsi_pluginserverd main process (23629) killed by TERM signal [ 455.109002] init: iscsi_pluginengined main process (23625) killed by TERM signal [ 455.578400] init: scsi_plugin_server main process (23634) killed by TERM signal [ 457.987211] init: iscsi_pluginserverd main process (24206) killed by TERM signal [ 458.173710] init: iscsi_pluginengined main process (24169) killed by TERM signal [ 458.811853] init: scsi_plugin_server main process (24276) killed by TERM signal [ 460.902539] init: iscsi_pluginserverd main process (24946) killed by TERM signal [ 461.080835] init: iscsi_pluginengined main process (24930) killed by TERM signal [ 461.561792] init: scsi_plugin_server main process (25061) killed by TERM signal [ 464.308209] init: nmbd main process (25913) killed by TERM signal [ 464.521718] init: iscsi_pluginserverd main process (25573) killed by TERM signal [ 464.550926] init: iscsi_pluginengined main process (25550) killed by TERM signal [ 464.651395] init: scsi_plugin_server main process (25643) killed by TERM signal [ 467.827800] init: iscsi_pluginserverd main process (26052) terminated with status 255 [ 467.838036] init: iscsi_pluginserverd main process ended, respawning [ 472.475872] usb 1-4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 935.118416] ------------[ cut here ]------------ [ 935.123592] WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x24b/0x260() [ 935.131667] NETDEV WATCHDOG: eth1 (r8152): transmit queue 0 timed out [ 935.138877] Modules linked in: r8152(OF) bridge stp aufs macvlan veth xt_conntrack xt_addrtype ipt_MASQUERADE xt_REDIRECT xt_nat iptable_nat nf_nat_ipv4 nf_nat cifs udf isofs loop tcm_loop(O) iscsi_target_mod(O) target_core_ep(O) target_core_multi_file(O) target_core_file(O) target_core_iblock(O) target_core_mod(O) syno_extent_pool(PO) rodsp_ep(O) syno_hddmon(P) hid_generic usbhid hid usblp usb_storage uhci_hcd ehci_pci ehci_hcd xt_mac xt_geoip(O) compat_xtables(O) nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables xt_recent xt_iprange xt_limit xt_state xt_tcpudp xt_multiport xt_LOG nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack iptable_filter ip_tables x_tables braswell_synobios(PO) leds_lp3943 exfat(O) btrfs i915 drm_kms_helper cfbfillrect cfbcopyarea cfbimgblt output drm fb fbdev intel_agp [ 935.218609] intel_gtt agpgart video backlight button synoacl_vfs(PO) zlib_deflate hfsplus md4 hmac libcrc32c compat(O) igb(O) i2c_algo_bit e1000e(O) vxlan fuse vfat fat crc32c_intel aesni_intel glue_helper lrw gf128mul ablk_helper arc4 cryptd ecryptfs sha256_generic sha1_generic ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_powersave cpufreq_performance acpi_cpufreq mperf processor thermal_sys cpufreq_stats freq_table dm_snapshot crc_itu_t crc_ccitt quota_v2 quota_tree psnap p8022 llc sit tunnel4 ip_tunnel ipv6 sg etxhci_hcd xhci_hcd usbcore usb_common [last unloaded: r8152] [ 935.276636] CPU: 0 PID: 0 Comm: swapper/0 Tainted: PF O 3.10.105 #25426 [ 935.284911] Hardware name: Synology Inc. DS216+/Type2 - Board Product Name, BIOS M.616 3/2/2016 [ 935.294641] ffffffff814b5acb ffffffff81036b08 0000000000000000 ffff88027fc03e68 [ 935.302947] 0000000000000001 0000000000000000 0000000000000060 ffffffff81036b69 [ 935.311262] ffffffff8173c708 ffff880200000030 ffff88027fc03e78 ffff88027fc03e38 [ 935.319569] Call Trace: [ 935.322304] [] ? dump_stack+0xc/0x15 [ 935.328845] [] ? warn_slowpath_common+0x58/0x70 [ 935.335757] [] ? warn_slowpath_fmt+0x49/0x50 [ 935.342379] [] ? trigger_load_balance+0x53/0x200 [ 935.349390] [] ? dev_watchdog+0x24b/0x260 [ 935.355719] [] ? dev_graft_qdisc+0x70/0x70 [ 935.362148] [] ? call_timer_fn.isra.32+0x1c/0x80 [ 935.369159] [] ? run_timer_softirq+0x16a/0x1f0 [ 935.375976] [] ? __do_softirq+0xc6/0x1a0 [ 935.382211] [] ? call_softirq+0x1c/0x1a0 [ 935.388445] [] ? do_softirq+0x35/0x70 [ 935.394387] [] ? irq_exit+0x95/0xa0 [ 935.400138] [] ? smp_apic_timer_interrupt+0x67/0xa0 [ 935.407443] [] ? apic_timer_interrupt+0x15f/0x170 [ 935.414548] [] ? arch_remove_reservations+0x110/0x110 [ 935.422744] [] ? default_idle+0x2/0x10 [ 935.428782] [] ? arch_cpu_idle+0x5/0x20 [ 935.434920] [] ? cpu_startup_entry+0x7d/0x160 [ 935.441642] [] ? start_kernel+0x3ad/0x3b5 [ 935.447973] ---[ end trace 53eba09cbc5258e6 ]--- [ 935.453140] r8152 2-2:1.0 eth1: Tx timeout [ 935.459580] r8152 2-2:1.0 eth1: Tx status -2 [ 935.464362] r8152 2-2:1.0 eth1: Tx status -71 [ 935.469232] r8152 2-2:1.0 eth1: Tx status -2 [ 935.474007] r8152 2-2:1.0 eth1: Tx status -71 [ 937.491537] r8152 2-2:1.0 eth1: get_registers -108 [ 937.496905] r8152 2-2:1.0 eth1: get_registers -2 [ 937.502074] r8152 2-2:1.0 eth1: get_registers -2 [ 937.507241] r8152 2-2:1.0 eth1: get_registers -2 [ 937.512412] r8152 2-2:1.0 eth1: get_registers -2 [ 937.517580] r8152 2-2:1.0 eth1: get_registers -2 [ 937.522749] r8152 2-2:1.0 eth1: get_registers -2 [ 937.527916] r8152 2-2:1.0 eth1: get_registers -2 [ 937.540923] r8152 2-2:1.0 eth1: get_registers -71 [ 937.549680] r8152 2-2:1.0 eth1: get_registers -71 [ 937.558425] r8152 2-2:1.0 eth1: get_registers -71 [ 937.567183] r8152 2-2:1.0 eth1: get_registers -71 [ 937.575920] r8152 2-2:1.0 eth1: get_registers -71 [ 937.584679] r8152 2-2:1.0 eth1: get_registers -71 [ 937.593420] r8152 2-2:1.0 eth1: get_registers -71 [ 937.602171] r8152 2-2:1.0 eth1: get_registers -71 [ 937.658664] usb 2-2: reset SuperSpeed USB device number 48 using xhci_hcd [ 937.679536] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted. [ 937.707602] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcec0 [ 937.717732] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf00 [ 937.727854] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf40 [ 976.109750] r8152 2-2:1.0 eth1: Tx timeout [ 976.115916] r8152 2-2:1.0 eth1: Tx status -2 [ 976.120699] r8152 2-2:1.0 eth1: Tx status -71 [ 976.125569] r8152 2-2:1.0 eth1: Tx status -2 [ 976.130345] r8152 2-2:1.0 eth1: Tx status -71 [ 976.259994] usb 2-2: reset SuperSpeed USB device number 48 using xhci_hcd [ 976.277908] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted. [ 976.288173] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcec0 [ 976.298299] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf00 [ 976.308418] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf40 [ 1011.117162] r8152 2-2:1.0 eth1: Tx timeout [ 1011.124546] r8152 2-2:1.0 eth1: Tx status -2 [ 1011.129323] r8152 2-2:1.0 eth1: Tx status -71 [ 1011.134194] r8152 2-2:1.0 eth1: Tx status -2 [ 1011.138969] r8152 2-2:1.0 eth1: Tx status -71 [ 1011.269405] usb 2-2: reset SuperSpeed USB device number 48 using xhci_hcd [ 1011.287314] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted. [ 1011.297547] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcec0 [ 1011.307668] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf00 [ 1011.317791] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf40 [ 1235.216089] r8152 2-2:1.0 eth1: get_registers -110 [ 1235.349283] usb 2-2: reset SuperSpeed USB device number 48 using xhci_hcd [ 1235.367294] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted. [ 1235.377666] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcec0 [ 1235.387794] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf00 [ 1235.397918] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf40 [ 1781.376982] init: smbd main process (11291) killed by TERM signal [ 1790.853397] init: smbd main process (15684) killed by TERM signal

Output of `lsusb` command

|usb1 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (xhci_hcd 0000:00:14.0) hub |1-4 05e3:0610:6202 09 2.10 480MBit/s 100mA 1IF (GenesysLogic USB2.1 Hub ffffffd6ffffffa3ffffffebffffffcb) hub |1-4.1 1058:25a3:1021 00 2.10 480MBit/s 30mA 1IF (Western Digital Elements 25A3 37534B5945324C57) |1-4.2 051d:0002:0106 00 1.10 1.5MBit/s 24mA 1IF (American Power Conversion Back-UPS XS 700U FW:924.Z5 .I USB FW:Z5 3B2009X61229 ) |1-4.3 1058:1140:1019 00 2.10 480MBit/s 12mA 1IF (Western Digital My Book 1140 574D43315430393830313533) |1-5 f400:f400:0100 00 2.00 480MBit/s 200mA 1IF (Synology DiskStation 65006210CCA34F25) |usb2 1d6b:0003:0310 09 3.00 5000MBit/s 0mA 1IF (xhci_hcd 0000:00:14.0) hub |2-2 0bda:8156:3000 00 3.20 5000MBit/s 512mA 1IF (Realtek USB 10/100/1G/2.5G LAN 000000001)

Output of `ifconfig -a` command

docker0 Link encap:Ethernet HWaddr 02:42:88:EF:8E:A9 inet addr:172.17.0.1 Bcast:172.17.255.255 Mask:255.255.0.0 inet6 addr: fe80::42:88ff:feef:8ea9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:156 errors:0 dropped:0 overruns:0 frame:0 TX packets:50 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:46383 (45.2 KiB) TX bytes:17713 (17.2 KiB)

docker36d Link encap:Ethernet HWaddr A6:33:2D:11:3F:85 inet6 addr: fe80::a433:2dff:fe11:3f85/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:156 errors:0 dropped:0 overruns:0 frame:0 TX packets:56 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:48567 (47.4 KiB) TX bytes:18181 (17.7 KiB)

eth0 Link encap:Ethernet HWaddr 00:11:32:58:AF:D4 inet addr:192.168.192.9 Bcast:192.168.192.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:3000 Metric:1 RX packets:34805 errors:0 dropped:0 overruns:0 frame:0 TX packets:39264 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8373153 (7.9 MiB) TX bytes:13784023 (13.1 MiB)

eth1 Link encap:Ethernet HWaddr A0:CE:C8:E1:E3:AF inet addr:192.168.192.123 Bcast:192.168.192.255 Mask:255.255.255.0 inet6 addr: fe80::a2ce:c8ff:fee1:e3af/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:114158 errors:0 dropped:0 overruns:0 frame:0 TX packets:171726 errors:73 dropped:33 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:74504429 (71.0 MiB) TX bytes:236763953 (225.7 MiB)

lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:30829 errors:0 dropped:0 overruns:0 frame:0 TX packets:30829 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8130097 (7.7 MiB) TX bytes:8130097 (7.7 MiB)

sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

bb-qq / r8152