Closed techsolo12 closed 3 years ago
Thank you for the report. The new release r8152-rtd1296-2.15.0-3.spk should fix this issue.
Thank you for your reply. But i got the same error. I hope you can investiged a second time.
2021/07/18 09:53:07 install r8152 2.15.0-3 Begin preinst
2021/07/18 09:53:07 install r8152 2.15.0-3 End preinst ret=[0]
2021/07/18 09:53:07 install r8152 2.15.0-3 Begin /bin/mkdir -p /volume1/@appstore/r8152
2021/07/18 09:53:07 install r8152 2.15.0-3 End /bin/mkdir -p /volume1/@appstore/r8152 ret=[0]
2021/07/18 09:53:07 install r8152 2.15.0-3 Begin /bin/rm -rf /volume1/@appstore/r8152
2021/07/18 09:53:07 install r8152 2.15.0-3 End /bin/rm -rf /volume1/@appstore/r8152 ret=[0]
2021/07/18 09:53:07 install r8152 2.15.0-3 Begin /bin/mv -f /volume1/@tmp/pkginstall/extract.oEpwQS/package /volume1/@appstore/r8152
2021/07/18 09:53:07 install r8152 2.15.0-3 End /bin/mv -f /volume1/@tmp/pkginstall/extract.oEpwQS/package /volume1/@appstore/r8152 ret=[0]
2021/07/18 09:53:07 install r8152 2.15.0-3 Begin /bin/rm -rf /var/packages/r8152
2021/07/18 09:53:07 install r8152 2.15.0-3 End /bin/rm -rf /var/packages/r8152 ret=[0]
2021/07/18 09:53:07 install r8152 2.15.0-3 Begin /bin/mkdir -p /var/packages/r8152
2021/07/18 09:53:07 install r8152 2.15.0-3 End /bin/mkdir -p /var/packages/r8152 ret=[0]
2021/07/18 09:53:07 install r8152 2.15.0-3 Begin /bin/touch /var/packages/r8152/installing
2021/07/18 09:53:07 install r8152 2.15.0-3 End /bin/touch /var/packages/r8152/installing ret=[0]
2021/07/18 09:53:07 install r8152 2.15.0-3 Begin /bin/mv -f /volume1/@tmp/pkginstall/extract.oEpwQS/INFO /var/packages/r8152/INFO
2021/07/18 09:53:07 install r8152 2.15.0-3 End /bin/mv -f /volume1/@tmp/pkginstall/extract.oEpwQS/INFO /var/packages/r8152/INFO ret=[0]
2021/07/18 09:53:07 install r8152 2.15.0-3 Begin /bin/rm -rf /var/packages/r8152/scripts
2021/07/18 09:53:07 install r8152 2.15.0-3 End /bin/rm -rf /var/packages/r8152/scripts ret=[0]
2021/07/18 09:53:07 install r8152 2.15.0-3 Begin /bin/mv -f /volume1/@tmp/pkginstall/extract.oEpwQS/scripts /var/packages/r8152/scripts
2021/07/18 09:53:07 install r8152 2.15.0-3 End /bin/mv -f /volume1/@tmp/pkginstall/extract.oEpwQS/scripts /var/packages/r8152/scripts ret=[0]
2021/07/18 09:53:07 install r8152 2.15.0-3 Begin /bin/rm -rf /var/packages/r8152/conf
2021/07/18 09:53:07 install r8152 2.15.0-3 End /bin/rm -rf /var/packages/r8152/conf ret=[0]
2021/07/18 09:53:07 install r8152 2.15.0-3 Begin /bin/mv -f /volume1/@tmp/pkginstall/extract.oEpwQS/conf /var/packages/r8152/conf
2021/07/18 09:53:07 install r8152 2.15.0-3 End /bin/mv -f /volume1/@tmp/pkginstall/extract.oEpwQS/conf /var/packages/r8152/conf ret=[0]
2021/07/18 09:53:08 install r8152 2.15.0-3 Begin postinst
/var/packages/r8152/scripts/postinst: line 11: /opt/sbin/spk_su: cannot execute binary file: Exec format error
2021/07/18 09:53:08 install r8152 2.15.0-3 End postinst ret=[0]
2021/07/18 09:53:08 install r8152 2.15.0-3 Begin start-stop-status start
insmod: ERROR: could not insert module /volume1/@appstore/r8152/r8152/r8152.ko: Operation not permitted
ls: cannot access '/sys/class/net/sit0/device/driver': No such file or directory
2021/07/18 09:53:23 install r8152 2.15.0-3 End start-stop-status start ret=[0]
2021/07/18 09:57:14 (system) trigger r8152 2.15.0-3 Begin start-stop-status stop
ls: cannot access '/sys/class/net/sit0/device/driver': No such file or directory
rmmod: ERROR: Module r8152 is not currently loaded
2021/07/18 09:57:14 (system) trigger r8152 2.15.0-3 End start-stop-status stop ret=[0]
2021/07/18 09:59:06 (system) trigger r8152 2.15.0-3 Begin start-stop-status start
insmod: ERROR: could not insert module /volume1/@appstore/r8152/r8152/r8152.ko: Operation not permitted
ls: cannot access '/sys/class/net/sit0/device/driver': No such file or directory
2021/07/18 09:59:21 (system) trigger r8152 2.15.0-3 End start-stop-status start ret=[0]
2021/07/18 10:00:00 start r8152 2.15.0-3 Begin start-stop-status stop
ls: cannot access '/sys/class/net/sit0/device/driver': No such file or directory
rmmod: ERROR: Module r8152 is not currently loaded
2021/07/18 10:00:00 start r8152 2.15.0-3 End start-stop-status stop ret=[0]
2021/07/18 10:00:02 start r8152 2.15.0-3 Begin start-stop-status start
insmod: ERROR: could not insert module /volume1/@appstore/r8152/r8152/r8152.ko: Operation not permitted
ls: cannot access '/sys/class/net/sit0/device/driver': No such file or directory
2021/07/18 10:00:17 start r8152 2.15.0-3 End start-stop-status start ret=[0]
Did you run install -m 4755 -o root -D /var/packages/r8152/target/r8152/spk_su /opt/sbin/spk_su
again?
At the second installation i don't used this command, because it wasn't nessesary. The installation wasn't failed or something else. I think you must use this command only one time. But i have tested it after reed your comment and it changed nothing. I got the same error like before. The error log is also the same.
At the second installation i don't used this command, because it wasn't nessesary. The installation wasn't failed or something else.
I think you must use this command only one time.
But i have tested it after reed your comment and it changed nothing. I got the same error like before. The error log is also the same.
I used the command when doing the upgrade.
I would try this:
Remove any driver for the USB adapter Reboot (don't forget to re-connect the existing 1Gb ethernet Re-install the latest driver from bb-qq Get the error, execute install -m 4755 -o root -D /var/packages/r8152/target/r8152/spk_su /opt/sbin/spk_su and re-install the driver Add the (root) start-up script ifconfig eth2 up (could be eth1 because you only have 1 ethernet port) synonet –dhcp eth2 (same remark as above) Reboot Does the adapter comes on? Blinking LED. No? Describe your issue Yes. Nice. Configure your adapter for your needs. Reboot and during reboot, disconnect your 1Gb adapter 🤞
/var/packages/r8152/scripts/postinst: line 11: /opt/sbin/spk_su: cannot execute binary file: Exec format error
Since I fixed the different spk_su binaries was packaged, I wanted you to try the following steps.
/var/packages/r8152/target/r8152/spk_su
)install -m 4755 -o root -D /var/packages/r8152/target/r8152/spk_su /opt/sbin/spk_su
If this still doesn't work, you may want to uninstall the package once.
Hello,
i'am sorry for the delay, i'am actually in vacation. I have already uninstall the old package and remove the package at the second installation. Today i tried it a third time and it works, but i did it on the same way like before.
I have a little improvement for the issue template. We should add the output from sudo cat /var/log/packages/r8152.log
Thank you a lot guys!
Hello,
i'am sorry for the delay, i'am actually in vacation.
I have already uninstall the old package and remove the package at the second installation.
Today i tried it a third time and it works, but i did it on the same way like before.
Remove the old package
Clean trash from old package
Restart the Synology NAS
Manuall install the new package r8152-rtd1296-2.15.0-3.spk
Get NO installation failed error (i didn't know why? I did it only at the first installation)
Now the package are stable and don't stop from it self.
Configure the ethernet interface from WebUI.
I have a little improvement for the issue template. We should add the output from
sudo cat /var/log/packages/r8152.log
Thank you a lot guys!
Top 🤙
Description of the problem
I installed the DSM 7.0 version of the driver and failed. Then i tried
install -m 4755 -o root -D /var/packages/r8152/target/r8152/spk_su /opt/sbin/spk_su
after this, i can do the installation successfully. But the package will stop from it self and i got the error: Manually stopped. Than i started the package manually and after 5 seconds i got the same error.In the first log you can see that isn't possible to insert a module because operation isn't permitted.
Description of your products
Synology DS220j Linux node-backup 4.4.180+ #41890 SMP Fri Jun 25 02:40:26 CST 2021 aarch64 GNU/Linux synology_rtd1296_ds220j DSM 7.0 TechRise USB3.0 Ethernet Adapter RTL8153 https://smile.amazon.de/gp/product/B08JC818CV/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Description of your environment
Rear Port of Synology DS220J Ubiquit UniFi USW Pro Switch PC: Realtek® 8111G Gigabit LAN controller Cat.6a
Output of
sudo cat /var/log/packages/r8152.log
Output of
dmesg
commandOutput of
lsusb
commandOutput of
ifconfig -a
command