search

bb-qq / r8152

Synology DSM driver for Realtek RTL8152/RTL8153/RTL8156 based adapters
GNU General Public License v2.0
2.2k stars 190 forks source link

Can't set r8152 LAN as default gateway. #133

Closed riverscn closed 3 years ago

riverscn commented 3 years ago

Description of the problem

Can't set r8152 LAN as default gateway.

If it is the only interface connected, all the port forwards will be disabled.

Description of your products

  • DS720+
    • Linux DS-SHUN 4.4.180+ #41890 SMP Fri Jun 25 02:37:14 CST 2021 x86_64 GNU/Linux synology_geminilake_720+
    • DSM 7.0-41890
  • ASUSTOR AS-U2.5G

Description of your environment

  • connect using a hub
    • PC: TL-NG421
    • Hub: TL-SH1005
  • Cat.6

Output of dmesg command

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.180+ (root@build13) (gcc version 7.5.0 (GCC) ) #41890 SMP Fri Jun 25 02:37:14 CST 2021
[    0.000000] Command line: root=/dev/md0 intel_iommu=igfx_off netif_num=2 HddEnableDynamicPower=1 syno_hw_version=DS720+ vender_format_version=2 synoboot2 sn=20A0QWRCGA4VX macs=001132dfa9cd,001132dfa9ce syno_ttyS0=pciserial,0x0:0x18.0x2,115200 syno_ttyS1=pciserial,0x0:0x18.0x0,115200
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] x86/fpu: xstate_offset[3]:  960, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
[    0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 1088 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000012151000-0x0000000070f9dfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000070f9e000-0x000000007149dfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007149e000-0x000000007789dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007789e000-0x0000000077a9dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000077a9e000-0x0000000077addfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000077ade000-0x0000000078d5efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078d5f000-0x000000007965efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007965f000-0x0000000079bfffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079c00000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001ffffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x01ddcae8-0x01ddcaf7] usable ==> usable
[    0.000000] e820: update [mem 0x59b62240-0x59b6298d] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x0000000000085fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000086000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000001ddcae7] usable
[    0.000000] reserve setup_data: [mem 0x0000000001ddcae8-0x0000000001ddcaf7] usable
[    0.000000] reserve setup_data: [mem 0x0000000001ddcaf8-0x000000000fffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000010000000-0x0000000012150fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000012151000-0x0000000059b6223f] usable
[    0.000000] reserve setup_data: [mem 0x0000000059b62240-0x0000000059b6298d] usable
[    0.000000] reserve setup_data: [mem 0x0000000059b6298e-0x0000000070f9dfff] usable
[    0.000000] reserve setup_data: [mem 0x0000000070f9e000-0x000000007149dfff] type 20
[    0.000000] reserve setup_data: [mem 0x000000007149e000-0x000000007789dfff] reserved
[    0.000000] reserve setup_data: [mem 0x000000007789e000-0x0000000077a9dfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000077a9e000-0x0000000077addfff] ACPI data
[    0.000000] reserve setup_data: [mem 0x0000000077ade000-0x0000000078d5efff] usable
[    0.000000] reserve setup_data: [mem 0x0000000078d5f000-0x000000007965efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000007965f000-0x0000000079bfffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000079c00000-0x000000007fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000001ffffffff] usable
[    0.000000] efi: EFI v2.60 by INSYDE Corp.
[    0.000000] efi:  ACPI=0x77add000  ACPI 2.0=0x77add014  SMBIOS=0x74b45000  SMBIOS 3.0=0x74b43000  ESRT=0x74b46218
[    0.000000] esrt: Reserving ESRT space from 0x0000000074b46218 to 0x0000000074b46250.
[    0.000000] SMBIOS 3.0.1 present.
[    0.000000] Kernel/User page tables isolation: disabled
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x200000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00FF800000 mask 7FFF800000 write-combining
[    0.000000]   1 base 0000000000 mask 7F80000000 write-back
[    0.000000]   2 base 007A000000 mask 7FFE000000 uncachable
[    0.000000]   3 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   4 base 0100000000 mask 7F00000000 write-back
[    0.000000]   5 base 0090000000 mask 7FF0000000 write-combining
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC
[    0.000000] e820: last_pfn = 0x79c00 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff88000007a000] 7a000 size 28672
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x01a6f000, 0x01a6ffff] PGTABLE
[    0.000000] BRK [0x01a70000, 0x01a70fff] PGTABLE
[    0.000000] BRK [0x01a71000, 0x01a71fff] PGTABLE
[    0.000000] BRK [0x01a72000, 0x01a72fff] PGTABLE
[    0.000000] BRK [0x01a73000, 0x01a73fff] PGTABLE
[    0.000000] BRK [0x01a74000, 0x01a74fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x37607000-0x37afafff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x0000000077ADD014 000024 (v02 INSYDE)
[    0.000000] ACPI: XSDT 0x0000000077AB6188 0000F4 (v01 INSYDE INSYDE   00000003      01000013)
[    0.000000] ACPI: FACP 0x0000000077AD3000 000114 (v06 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x0000000077AC1000 00AE45 (v02 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: FACS 0x0000000077A97000 000040
[    0.000000] ACPI: FACS 0x0000000077A97000 000040
[    0.000000] ACPI: UEFI 0x0000000077ADC000 000236 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x0000000077ADB000 000042 (v01 INSYDE INSYDE   00000002 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x0000000077ADA000 000781 (v01 INSYDE Tpm2Tabl 00001000 ACPI 00040000)
[    0.000000] ACPI: TPM2 0x0000000077AD9000 000034 (v04 INSYDE INSYDE   00000002 ACPI 00040000)
[    0.000000] ACPI: BDAT 0x0000000077AD7000 000030 (v02 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.000000] ACPI: HPET 0x0000000077AD2000 000038 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x0000000077AD1000 00005C (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: APIC 0x0000000077AD0000 000084 (v03 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x0000000077ACF000 00003C (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: NPKT 0x0000000077ACE000 000065 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: PRAM 0x0000000077ACD000 000030 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: WSMT 0x0000000077ACC000 000028 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x0000000077ABE000 000271 (v02 INSYDE UsbCTabl 00000003 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x0000000077ABD000 000937 (v01 INSYDE Platform 00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x0000000077ABC000 000583 (v02 INSYDE Cpu0Ist  00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x0000000077ABB000 00072B (v02 INSYDE CpuSsdt  00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x0000000077ABA000 00032D (v02 INSYDE Cpu0Tst  00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x0000000077AB9000 00017C (v02 INSYDE ApTst    00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x0000000077AB3000 00274C (v02 INSYDE SaSsdt   00003000 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x0000000077AB8000 000044 (v01 INSYDE INSYDE   00000002 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x0000000077AC0000 000038 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x0000000077AD5000 000034 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: DBG2 0x0000000077AD6000 000072 (v00 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x0000000077AD4000 0000A8 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: WDAT 0x0000000077ABF000 000104 (v01 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x0000000000085fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000012151000-0x0000000070f9dfff]
[    0.000000]   node   0: [mem 0x0000000077ade000-0x0000000078d5efff]
[    0.000000]   node   0: [mem 0x000000007965f000-0x0000000079bfffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001ffffffff]
[    0.000000] On node 0 totalpages: 1508851
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 23 pages reserved
[    0.000000]   DMA zone: 3972 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7130 pages used for memmap
[    0.000000]   DMA32 zone: 456303 pages, LIFO batch:31
[    0.000000]   Normal zone: 16384 pages used for memmap
[    0.000000]   Normal zone: 1048576 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SYNO Spinup Group 0: 1
[    0.000000] SYNO Spinup Group 1: 1
[    0.000000] SYNO Spinup Group Delay: 11
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00086000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x01ddc000-0x01ddcfff]
[    0.000000] PM: Registered nosave memory: [mem 0x01ddc000-0x01ddcfff]
[    0.000000] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
[    0.000000] PM: Registered nosave memory: [mem 0x59b62000-0x59b62fff]
[    0.000000] PM: Registered nosave memory: [mem 0x59b62000-0x59b62fff]
[    0.000000] PM: Registered nosave memory: [mem 0x70f9e000-0x7149dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7149e000-0x7789dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7789e000-0x77a9dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x77a9e000-0x77addfff]
[    0.000000] PM: Registered nosave memory: [mem 0x78d5f000-0x7965efff]
[    0.000000] PM: Registered nosave memory: [mem 0x79c00000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xd3708fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd3709000-0xd3709fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd370a000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xff7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xd3708fff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff8801ffc00000 s95128 r8192 d31848 u524288
[    0.000000] pcpu-alloc: s95128 r8192 d31848 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1485250
[    0.000000] Kernel command line: root=/dev/md0 intel_iommu=igfx_off netif_num=2 HddEnableDynamicPower=1 syno_hw_version=DS720+ vender_format_version=2 synoboot2 sn=20A0QWRCGA4VX macs=001132dfa9cd,001132dfa9ce syno_ttyS0=pciserial,0x0:0x18.0x2,115200 syno_ttyS1=pciserial,0x0:0x18.0x0,115200
[    0.000000] DMAR: Disable GFX device mapping
[    0.000000] Internal netif num: 2
[    0.000000] Support HDD Dynamic Power.
[    0.000000] Synology Hardware Version: DS720+
[    0.000000] Vender format version: 2
[    0.000000] Serial Number: 20A0QWRCGA4VX
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Memory: 5788032K/6035404K available (5527K kernel code, 864K rwdata, 1760K rodata, 924K init, 664K bss, 247372K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:4352 nr_irqs:1024 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: PIT calibration matches HPET. 1 loops
[    0.000000] tsc: Detected 1997.135 MHz processor
[    0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3994.27 BogoMIPS (lpj=1997135)
[    0.011874] pid_max: default: 32768 minimum: 301
[    0.017036] ACPI: Core revision 20150930
[    0.034609] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.046334] Security Framework initialized
[    0.050759] AppArmor: AppArmor initialized
[    0.055323] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.062997] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.071457] Initializing cgroup subsys io
[    0.075777] Initializing cgroup subsys memory
[    0.080669] Initializing cgroup subsys devices
[    0.085597] Initializing cgroup subsys freezer
[    0.090594] CPU: Physical Processor ID: 0
[    0.095028] CPU: Processor Core ID: 0
[    0.107080] mce: CPU supports 7 MCE banks
[    0.111442] CPU0: Thermal monitoring enabled (TM1)
[    0.116787] process: using mwait in idle threads
[    0.121903] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.127834] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.134454] Speculative Store Bypass: Vulnerable
[    0.141719] Freeing SMP alternatives memory: 24K
[    0.153634] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.170177] TSC deadline timer enabled
[    0.170182] smpboot: CPU0: Intel(R) Celeron(R) J4125 CPU @ 2.00GHz (family: 0x6, model: 0x7a, stepping: 0x8)
[    0.181026] Performance Events: PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.
[    0.192253] ... version:                4
[    0.196720] ... bit width:              48
[    0.201290] ... generic registers:      4
[    0.205762] ... value mask:             0000ffffffffffff
[    0.211688] ... max period:             00007fffffffffff
[    0.217617] ... fixed-purpose events:   3
[    0.222093] ... event mask:             000000070000000f
[    0.228488] x86: Booting SMP configuration:
[    0.232973] .... node  #0, CPUs:      #1 #2 #3
[    0.269494] x86: Booted up 1 node, 4 CPUs
[    0.273981] smpboot: Total of 4 processors activated (15977.08 BogoMIPS)
[    0.286793] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.295921] devtmpfs: initialized
[    0.299883] PM: Registering ACPI NVS region [mem 0x7789e000-0x77a9dfff] (2097152 bytes)
[    0.308759] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.319535] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.326550] pinctrl core: initialized pinctrl subsystem
[    0.332525] NET: Registered protocol family 16
[    0.345326] cpuidle: using governor ladder
[    0.356725] cpuidle: using governor menu
[    0.361010] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.369368] ACPI: bus type PCI registered
[    0.373926] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.384238] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.391823] PCI: Using configuration type 1 for base access
[    0.404540] ACPI: Added _OSI(Module Device)
[    0.409027] ACPI: Added _OSI(Processor Device)
[    0.413985] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.419236] ACPI: Added _OSI(Processor Aggregator Device)
[    0.429860] ACPI: Executed 3 blocks of module-level executable AML code
[    0.446607] ACPI: Dynamic OEM Table Load:
[    0.450898] ACPI: SSDT 0xFFFF8801F82C0400 000102 (v02 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.461271] ACPI: Dynamic OEM Table Load:
[    0.465561] ACPI: SSDT 0xFFFF8801F82C0600 00015F (v02 PmRef  ApIst    00003000 INTL 20130117)
[    0.475741] ACPI: Dynamic OEM Table Load:
[    0.480030] ACPI: SSDT 0xFFFF8801F8B2D000 00008D (v02 PmRef  ApCst    00003000 INTL 20130117)
[    0.490921] ACPI: Interpreter enabled
[    0.494843] ACPI: (supports S0 S4 S5)
[    0.498902] ACPI: Using IOAPIC for interrupt routing
[    0.504483] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.515556] ACPI: Power Resource [DRST] (on)
[    0.520436] ACPI: Power Resource [DRST] (on)
[    0.525319] ACPI: Power Resource [DRST] (on)
[    0.530198] ACPI: Power Resource [DRST] (on)
[    0.535078] ACPI: Power Resource [DRST] (on)
[    0.539944] ACPI: Power Resource [DRST] (on)
[    0.548597] ACPI: Power Resource [WRST] (on)
[    0.556871] ACPI: Power Resource [FN00] (on)
[    0.562022] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.568751] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.578602] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    0.586199] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.595343] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.607241] PCI host bridge to bus 0000:00
[    0.611672] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.618570] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.626151] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.633736] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.641319] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.649677] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.658038] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.666396] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
[    0.674751] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window]
[    0.683111] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[    0.691473] pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window]
[    0.699844] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
[    0.708207] pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window]
[    0.716568] pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window]
[    0.724932] pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window]
[    0.733299] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window]
[    0.741666] pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window]
[    0.750032] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window]
[    0.758399] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window]
[    0.766763] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.772904] pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000
[    0.773244] pci 0000:00:02.0: [8086:3185] type 00 class 0x030000
[    0.773265] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
[    0.773273] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.773279] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.773619] pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000
[    0.773667] pci 0000:00:0f.0: reg 0x10: [mem 0xa1512000-0xa1512fff 64bit]
[    0.773765] pci 0000:00:0f.0: PME# supported from D3hot
[    0.774061] pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601
[    0.774086] pci 0000:00:12.0: reg 0x10: [mem 0xa1510000-0xa1511fff]
[    0.774095] pci 0000:00:12.0: reg 0x14: [mem 0xa151b000-0xa151b0ff]
[    0.774103] pci 0000:00:12.0: reg 0x18: [io  0x4080-0x4087]
[    0.774113] pci 0000:00:12.0: reg 0x1c: [io  0x4088-0x408b]
[    0.774121] pci 0000:00:12.0: reg 0x20: [io  0x4060-0x407f]
[    0.774130] pci 0000:00:12.0: reg 0x24: [mem 0xa1519000-0xa15197ff]
[    0.774164] pci 0000:00:12.0: PME# supported from D3hot
[    0.774417] pci 0000:00:13.0: [8086:31d8] type 01 class 0x060400
[    0.774487] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[    0.774704] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.780893] pci 0000:00:13.2: [8086:31da] type 01 class 0x060400
[    0.780968] pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
[    0.781185] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.787374] pci 0000:00:13.3: [8086:31db] type 01 class 0x060400
[    0.787446] pci 0000:00:13.3: PME# supported from D0 D3hot D3cold
[    0.787664] pci 0000:00:13.3: System wakeup disabled by ACPI
[    0.793864] pci 0000:00:14.0: [8086:31d6] type 01 class 0x060400
[    0.793936] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[    0.794153] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.800335] pci 0000:00:14.1: [8086:31d7] type 01 class 0x060400
[    0.800411] pci 0000:00:14.1: PME# supported from D0 D3hot D3cold
[    0.800629] pci 0000:00:14.1: System wakeup disabled by ACPI
[    0.806830] pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330
[    0.806860] pci 0000:00:15.0: reg 0x10: [mem 0xa1500000-0xa150ffff 64bit]
[    0.806922] pci 0000:00:15.0: PME# supported from D3hot D3cold
[    0.807144] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.813355] pci 0000:00:16.0: [8086:31ac] type 00 class 0x118000
[    0.813385] pci 0000:00:16.0: reg 0x10: [mem 0xa1513000-0xa1513fff 64bit]
[    0.813402] pci 0000:00:16.0: reg 0x18: [mem 0xa1514000-0xa1514fff 64bit]
[    0.813726] pci 0000:00:18.0: [8086:31bc] type 00 class 0x118000
[    0.813755] pci 0000:00:18.0: reg 0x10: [mem 0xa1515000-0xa1515fff 64bit]
[    0.813769] pci 0000:00:18.0: reg 0x18: [mem 0xa1516000-0xa1516fff 64bit]
[    0.814072] pci 0000:00:18.2: [8086:31c0] type 00 class 0x118000
[    0.814102] pci 0000:00:18.2: reg 0x10: [mem 0xa1517000-0xa1517fff 64bit]
[    0.814116] pci 0000:00:18.2: reg 0x18: [mem 0xa1518000-0xa1518fff 64bit]
[    0.814463] pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100
[    0.814854] pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500
[    0.814916] pci 0000:00:1f.1: reg 0x10: [mem 0xa151a000-0xa151a0ff 64bit]
[    0.814994] pci 0000:00:1f.1: reg 0x20: [io  0x4040-0x405f]
[    0.815397] pci 0000:01:00.0: [1b4b:9170] type 00 class 0x010601
[    0.815426] pci 0000:01:00.0: reg 0x10: [io  0x3018-0x301f]
[    0.815436] pci 0000:01:00.0: reg 0x14: [io  0x3024-0x3027]
[    0.815447] pci 0000:01:00.0: reg 0x18: [io  0x3010-0x3017]
[    0.815457] pci 0000:01:00.0: reg 0x1c: [io  0x3020-0x3023]
[    0.815467] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x300f]
[    0.815477] pci 0000:01:00.0: reg 0x24: [mem 0xa1400000-0xa14001ff]
[    0.815487] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.815526] pci 0000:01:00.0: PME# supported from D3hot
[    0.815564] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.823726] pci 0000:00:13.0: PCI bridge to [bus 01]
[    0.829091] pci 0000:00:13.0:   bridge window [io  0x3000-0x3fff]
[    0.829096] pci 0000:00:13.0:   bridge window [mem 0xa1400000-0xa14fffff]
[    0.829160] pci 0000:02:00.0: [8086:2522] type 00 class 0x010802
[    0.829203] pci 0000:02:00.0: reg 0x10: [mem 0xa1310000-0xa1313fff 64bit]
[    0.829232] pci 0000:02:00.0: reg 0x20: [mem 0xa1300000-0xa130ffff 64bit]
[    0.829350] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.837514] pci 0000:00:13.2: PCI bridge to [bus 02]
[    0.842876] pci 0000:00:13.2:   bridge window [mem 0xa1300000-0xa13fffff]
[    0.842940] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.842983] pci 0000:03:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.843009] pci 0000:03:00.0: reg 0x18: [mem 0xa1204000-0xa1204fff 64bit]
[    0.843026] pci 0000:03:00.0: reg 0x20: [mem 0xa1200000-0xa1203fff 64bit]
[    0.843098] pci 0000:03:00.0: supports D1 D2
[    0.843100] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.843159] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.851313] pci 0000:00:13.3: PCI bridge to [bus 03]
[    0.856676] pci 0000:00:13.3:   bridge window [io  0x2000-0x2fff]
[    0.856680] pci 0000:00:13.3:   bridge window [mem 0xa1200000-0xa12fffff]
[    0.856747] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.856789] pci 0000:04:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.856815] pci 0000:04:00.0: reg 0x18: [mem 0xa1104000-0xa1104fff 64bit]
[    0.856834] pci 0000:04:00.0: reg 0x20: [mem 0xa1100000-0xa1103fff 64bit]
[    0.856905] pci 0000:04:00.0: supports D1 D2
[    0.856907] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.856970] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.865131] pci 0000:00:14.0: PCI bridge to [bus 04]
[    0.870495] pci 0000:00:14.0:   bridge window [io  0x1000-0x1fff]
[    0.870499] pci 0000:00:14.0:   bridge window [mem 0xa1100000-0xa11fffff]
[    0.870561] pci 0000:05:00.0: [8086:2522] type 00 class 0x010802
[    0.870602] pci 0000:05:00.0: reg 0x10: [mem 0xa1010000-0xa1013fff 64bit]
[    0.870632] pci 0000:05:00.0: reg 0x20: [mem 0xa1000000-0xa100ffff 64bit]
[    0.870748] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.878907] pci 0000:00:14.1: PCI bridge to [bus 05]
[    0.884271] pci 0000:00:14.1:   bridge window [mem 0xa1000000-0xa10fffff]
[    0.884301] pci_bus 0000:00: on NUMA node 0
[    0.885129] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.893963] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.902903] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.911844] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.920791] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.929744] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.938695] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.947637] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.957949] ACPI: Enabled 3 GPEs in block 00 to 7F
[    0.963271] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.969440] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.978495] vgaarb: loaded
[    0.981503] vgaarb: bridge control possible 0000:00:02.0
[    0.987525] SCSI subsystem initialized
[    0.991692] libata version 3.00 loaded.
[    0.991753] pps_core: LinuxPPS API ver. 1 registered
[    0.997174] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.007396] PTP clock support registered
[    1.011865] EFI Variables Facility v0.08 2004-May-17
[    1.075456] pstore: Registered efi as persistent store backend
[    1.081819] PCI: Using ACPI for IRQ routing
[    1.092976] PCI: pci_cache_line_size set to 64 bytes
[    1.093085] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    1.093087] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[    1.093089] e820: reserve RAM buffer [mem 0x01ddcae8-0x03ffffff]
[    1.093091] e820: reserve RAM buffer [mem 0x59b62240-0x5bffffff]
[    1.093093] e820: reserve RAM buffer [mem 0x70f9e000-0x73ffffff]
[    1.093094] e820: reserve RAM buffer [mem 0x78d5f000-0x7bffffff]
[    1.093096] e820: reserve RAM buffer [mem 0x79c00000-0x7bffffff]
[    1.093394] clocksource: Switched to clocksource hpet
[    1.108788] AppArmor: AppArmor Filesystem Enabled
[    1.113967] pnp: PnP ACPI init
[    1.117484] system 00:00: [io  0x0680-0x069f] has been reserved
[    1.123940] system 00:00: [io  0x0400-0x047f] has been reserved
[    1.130559] system 00:00: [io  0x0500-0x05fe] has been reserved
[    1.137175] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.137865] system 00:01: [mem 0xe0000000-0xefffffff] could not be reserved
[    1.145484] system 00:01: [mem 0xfea00000-0xfeafffff] has been reserved
[    1.152876] system 00:01: [mem 0xfed01000-0xfed01fff] has been reserved
[    1.160266] system 00:01: [mem 0xfed03000-0xfed03fff] has been reserved
[    1.167656] system 00:01: [mem 0xfed06000-0xfed06fff] has been reserved
[    1.175045] system 00:01: [mem 0xfed08000-0xfed09fff] has been reserved
[    1.182454] system 00:01: [mem 0xfed80000-0xfedbffff] has been reserved
[    1.189829] system 00:01: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    1.197217] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[    1.204609] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.204862] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.205041] pnp: PnP ACPI: found 3 devices
[    1.218699] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.228465] pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    1.239595] pci 0000:01:00.0: BAR 6: assigned [mem 0xa1410000-0xa141ffff pref]
[    1.247617] pci 0000:00:13.0: PCI bridge to [bus 01]
[    1.253157] pci 0000:00:13.0:   bridge window [io  0x3000-0x3fff]
[    1.259963] pci 0000:00:13.0:   bridge window [mem 0xa1400000-0xa14fffff]
[    1.267558] pci 0000:00:13.2: PCI bridge to [bus 02]
[    1.273083] pci 0000:00:13.2:   bridge window [mem 0xa1300000-0xa13fffff]
[    1.280667] pci 0000:00:13.3: PCI bridge to [bus 03]
[    1.286203] pci 0000:00:13.3:   bridge window [io  0x2000-0x2fff]
[    1.293012] pci 0000:00:13.3:   bridge window [mem 0xa1200000-0xa12fffff]
[    1.300604] pci 0000:00:14.0: PCI bridge to [bus 04]
[    1.306146] pci 0000:00:14.0:   bridge window [io  0x1000-0x1fff]
[    1.312960] pci 0000:00:14.0:   bridge window [mem 0xa1100000-0xa11fffff]
[    1.320554] pci 0000:00:14.1: PCI bridge to [bus 05]
[    1.326098] pci 0000:00:14.1:   bridge window [mem 0xa1000000-0xa10fffff]
[    1.333678] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    1.333681] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    1.333684] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    1.333686] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    1.333688] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    1.333691] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    1.333693] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    1.333696] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
[    1.333698] pci_bus 0000:00: resource 12 [mem 0x80000000-0xbfffffff window]
[    1.333700] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xefffffff window]
[    1.333703] pci_bus 0000:00: resource 14 [mem 0xfea00000-0xfeafffff window]
[    1.333705] pci_bus 0000:00: resource 15 [mem 0xfed00000-0xfed003ff window]
[    1.333707] pci_bus 0000:00: resource 16 [mem 0xfed01000-0xfed01fff window]
[    1.333709] pci_bus 0000:00: resource 17 [mem 0xfed03000-0xfed03fff window]
[    1.333712] pci_bus 0000:00: resource 18 [mem 0xfed06000-0xfed06fff window]
[    1.333714] pci_bus 0000:00: resource 19 [mem 0xfed08000-0xfed09fff window]
[    1.333716] pci_bus 0000:00: resource 20 [mem 0xfed80000-0xfedbffff window]
[    1.333718] pci_bus 0000:00: resource 21 [mem 0xfed1c000-0xfed1cfff window]
[    1.333720] pci_bus 0000:00: resource 22 [mem 0xfee00000-0xfeefffff window]
[    1.333723] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    1.333725] pci_bus 0000:01: resource 1 [mem 0xa1400000-0xa14fffff]
[    1.333727] pci_bus 0000:02: resource 1 [mem 0xa1300000-0xa13fffff]
[    1.333730] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    1.333732] pci_bus 0000:03: resource 1 [mem 0xa1200000-0xa12fffff]
[    1.333734] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    1.333736] pci_bus 0000:04: resource 1 [mem 0xa1100000-0xa11fffff]
[    1.333739] pci_bus 0000:05: resource 1 [mem 0xa1000000-0xa10fffff]
[    1.333778] NET: Registered protocol family 2
[    1.338713] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.346779] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.354289] TCP: Hash tables configured (established 65536 bind 65536)
[    1.361446] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.368256] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.375596] NET: Registered protocol family 1
[    1.380445] pci 0000:00:02.0: Video device with shadowed ROM
[    1.382062] pci 0000:01:00.0: Apply mv9170 specific programming steps
[    1.389112] PCI: CLS 64 bytes, default 64
[    1.584613] Trying to unpack rootfs image as initramfs...
[    2.967163] decompress cpio completed and skip redundant lzma
[    2.974656] Freeing initrd memory: 5072K
[    2.978898] DMAR: Host address width 39
[    2.983145] DMAR: DRHD base: 0x000000fed64000 flags: 0x0
[    2.989121] DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 9e2ff0505e
[    2.998421] DMAR: DRHD base: 0x000000fed65000 flags: 0x1
[    3.004355] DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
[    3.013198] DMAR: RMRR base: 0x000000777d7000 end: 0x000000777f6fff
[    3.020209] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[    3.027232] DMAR: No ATSR found
[    3.030906] DMAR: dmar1: Using Queued invalidation
[    3.036110] IOMMU passthrough mode = 1
[    3.040294] DMAR: Hardware identity mapping for device 0000:00:00.0
[    3.047295] DMAR: Hardware identity mapping for device 0000:00:0f.0
[    3.054298] DMAR: Hardware identity mapping for device 0000:00:12.0
[    3.061299] DMAR: Hardware identity mapping for device 0000:00:13.0
[    3.068299] DMAR: Hardware identity mapping for device 0000:00:13.2
[    3.075298] DMAR: Hardware identity mapping for device 0000:00:13.3
[    3.082293] DMAR: Hardware identity mapping for device 0000:00:14.0
[    3.089300] DMAR: Hardware identity mapping for device 0000:00:14.1
[    3.096305] DMAR: Hardware identity mapping for device 0000:00:15.0
[    3.103302] DMAR: Hardware identity mapping for device 0000:00:16.0
[    3.110312] DMAR: Hardware identity mapping for device 0000:00:18.0
[    3.117312] DMAR: Hardware identity mapping for device 0000:00:18.2
[    3.124305] DMAR: Hardware identity mapping for device 0000:00:1f.0
[    3.131307] DMAR: Hardware identity mapping for device 0000:00:1f.1
[    3.138309] DMAR: Hardware identity mapping for device 0000:01:00.0
[    3.145306] DMAR: Hardware identity mapping for device 0000:02:00.0
[    3.152307] DMAR: Hardware identity mapping for device 0000:03:00.0
[    3.159308] DMAR: Hardware identity mapping for device 0000:04:00.0
[    3.166299] DMAR: Hardware identity mapping for device 0000:05:00.0
[    3.173304] DMAR: Setting RMRR:
[    3.176805] DMAR: Ignoring identity map for HW passthrough device 0000:00:15.0 [0x777d7000 - 0x777f6fff]
[    3.187390] DMAR: Prepare 0-16MiB unity mapping for LPC
[    3.193221] DMAR: Ignoring identity map for HW passthrough device 0000:00:1f.0 [0x0 - 0xffffff]
[    3.202977] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    3.210216] iommu: Adding device 0000:00:00.0 to group 0
[    3.216134] iommu: Adding device 0000:00:0f.0 to group 1
[    3.222020] iommu: Adding device 0000:00:12.0 to group 2
[    3.227959] iommu: Adding device 0000:00:13.0 to group 3
[    3.233890] iommu: Adding device 0000:00:13.2 to group 4
[    3.239820] iommu: Adding device 0000:00:13.3 to group 5
[    3.245747] iommu: Adding device 0000:00:14.0 to group 6
[    3.251678] iommu: Adding device 0000:00:14.1 to group 7
[    3.257607] iommu: Adding device 0000:00:15.0 to group 8
[    3.263539] iommu: Adding device 0000:00:16.0 to group 9
[    3.269476] iommu: Adding device 0000:00:18.0 to group 10
[    3.275495] iommu: Adding device 0000:00:18.2 to group 10
[    3.281530] iommu: Adding device 0000:00:1f.0 to group 11
[    3.287553] iommu: Adding device 0000:00:1f.1 to group 11
[    3.293581] iommu: Adding device 0000:01:00.0 to group 12
[    3.299607] iommu: Adding device 0000:02:00.0 to group 13
[    3.305637] iommu: Adding device 0000:03:00.0 to group 14
[    3.311668] iommu: Adding device 0000:04:00.0 to group 15
[    3.317693] iommu: Adding device 0000:05:00.0 to group 16
[    3.326809] audit: initializing netlink subsys (disabled)
[    3.332714] audit: type=2000 audit(1537962659.065:1): initialized
[    3.339754] Initialise system trusted keyring
[    3.379424] VFS: Disk quotas dquot_6.6.0
[    3.383717] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.500914] Key type asymmetric registered
[    3.505339] Asymmetric key parser 'x509' registered
[    3.510875] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    3.519079] io scheduler noop registered
[    3.523408] io scheduler deadline registered
[    3.528237] io scheduler cfq registered (default)
[    3.534607] pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt
[    3.542227] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    3.549511] pcie_pme 0000:00:13.0:pcie01: service driver pcie_pme loaded
[    3.549557] pcieport 0000:00:13.2: Signaling PME through PCIe PME interrupt
[    3.557285] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    3.564578] pcie_pme 0000:00:13.2:pcie01: service driver pcie_pme loaded
[    3.564603] pcieport 0000:00:13.3: Signaling PME through PCIe PME interrupt
[    3.572353] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    3.579638] pcie_pme 0000:00:13.3:pcie01: service driver pcie_pme loaded
[    3.579664] pcieport 0000:00:14.0: Signaling PME through PCIe PME interrupt
[    3.587409] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    3.594698] pcie_pme 0000:00:14.0:pcie01: service driver pcie_pme loaded
[    3.594720] pcieport 0000:00:14.1: Signaling PME through PCIe PME interrupt
[    3.602474] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[    3.609769] pcie_pme 0000:00:14.1:pcie01: service driver pcie_pme loaded
[    3.947689] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    4.106244] Linux agpgart interface v0.103
[    4.144234] brd: module loaded
[    4.153750] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    4.162550] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    4.192963] dw-apb-uart.1: ttyS1 at MMIO 0xa1515000 (irq = 54, base_baud = 115200) is a 16550A
[    4.214016] console [ttyS0] disabled
[    4.217921] dw-apb-uart.2: ttyS0 at MMIO 0xa1517000 (irq = 6, base_baud = 115200) is a 16550A
[    4.227571] console [ttyS0] enabled
[    4.235171] bootconsole [earlyser0] disabled
[    4.244839] Loading iSCSI transport class v2.0-870.
[    4.252224] nvme nvme0: pci function 0000:02:00.0
[    4.257780] nvme nvme1: pci function 0000:05:00.0
[    4.263151] ahci 0000:00:12.0: version 3.0
[    4.263366] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    4.272419] ahci 0000:00:12.0: flags: 64bit ncq sntf clo only pmp pio slum part deso sadm sds apst
[    4.284410] scsi host0: ahci
[    4.289985] scsi host1: ahci
[    4.293324] ata1 : SATA max UDMA/133 abar m2048@0xa1519000 port 0xa1519100 irq 343
[    4.301795] ata2 : SATA max UDMA/133 abar m2048@0xa1519000 port 0xa1519180 irq 343
[    4.310306] Delay 11 seconds to wait for disk 2 ready.
[    4.310470] Change defer qc mode on external port for compatibility
[    4.310470] Change defer qc mode on external port for compatibility
[    4.310497] ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    4.310501] ahci 0000:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    4.310580] Cannot find slot node of this ata_port.
[    4.311613] scsi host2: ahci
[    4.313659] scsi host3: ahci
[    4.313726] ata3 : SATA max UDMA/133 abar m512@0xa1400000 port 0xa1400100 irq 344
[    4.313730] ata4 : SATA max UDMA/133 abar m512@0xa1400000 port 0xa1400180 irq 344
[    4.326379] rtc-s35390a i2c-RTC35390:00: rtc core: registered rtc-s35390a as rtc0
[    4.326401] i2c /dev entries driver
[    4.326639] i801_smbus 0000:00:1f.1: SMBus using polling
[    4.330119] md: raid1 personality registered for level 1
[    4.330261] NET: Registered protocol family 17
[    4.330287] Key type dns_resolver registered
[    4.330684] registered taskstats version 1
[    4.330689] Loading compiled-in untrusted X.509 certificates
[    4.330692] Loading compiled-in X.509 certificates
[    4.330719] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[    4.332124] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[    4.332146] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[    4.332159] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[    4.332170] page_owner is disabled
[    4.332193] AppArmor: AppArmor sha1 policy hashing enabled
[    4.339157] rtc-s35390a i2c-RTC35390:00: setting system clock to 2021-07-16 15:04:21 UTC (1626447861)
[    4.376807]  nvme0n1: p1
[    4.382334]  nvme1n1: p1
[    7.310760] tsc: Refined TSC clocksource calibration: 1996.800 MHz
[    7.317682] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
[   18.501766] clocksource: Switched to clocksource tsc
[   18.659515] ata1 (slot 1): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   18.668756] ata1.00 (slot 1): disabling queued TRIM support
[   18.668760] ata1.00 (slot 1): ATA-10: ST4000VN008-2DR166, SC60, max UDMA/133
[   18.676631] ata1.00 (slot 1): 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[   18.685471] ata1.00 (slot 1): SN:            WGY05W5C
[   18.692371] ata1.00 (slot 1): disabling queued TRIM support
[   18.692377] ata1.00 (slot 1): configured for UDMA/133
[   18.699028] scsi 0:0:0:0: Direct-Access     ATA      ST4000VN008-2DR166       SC60 PQ: 0 ANSI: 5
[   18.709020] got SATA disk[0]
[   18.712342] sd 0:0:0:0: [sata1] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[   18.721207] sd 0:0:0:0: [sata1] 4096-byte physical blocks
[   18.727356] sd 0:0:0:0: [sata1] Write Protect is off
[   18.732928] sd 0:0:0:0: [sata1] Mode Sense: 00 3a 00 00
[   18.732967] sd 0:0:0:0: [sata1] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   18.798845]  sata1: p1 p2 p3
[   18.802409] sd 0:0:0:0: [sata1] Attached SCSI disk
[   18.808464] ata4 : SATA link down (SStatus 0 SControl 300)
[   18.814612] ata4 : No present pin info for SATA link down event
[   18.821259] ata3 : SATA link down (SStatus 0 SControl 300)
[   18.827387] ata3 : No present pin info for SATA link down event
[   23.856616] ata2 (slot 2): link is slow to respond, please be patient (ready=0)
[   28.661807] ata2 (slot 2): softreset failed (device not ready)
[   28.668335] ata2 (slot 2): SRST fail, set srst fail flag
[   34.028887] ata2 (slot 2): link is slow to respond, please be patient (ready=0)
[   37.406350] ata2 (slot 2): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   37.414135] ata2 (slot 2): link reset sucessfully clear error flags
[   37.424854] ata2.00 (slot 2): disabling queued TRIM support
[   37.424858] ata2.00 (slot 2): ATA-10: ST10000VN0004-1ZD101, SC60, max UDMA/133
[   37.432935] ata2.00 (slot 2): 19532873728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   37.441972] ata2.00 (slot 2): SN:            ZA29ZHH0
[   37.450766] ata2.00 (slot 2): disabling queued TRIM support
[   37.450771] ata2.00 (slot 2): configured for UDMA/133
[   37.458921] scsi 1:0:0:0: Direct-Access     ATA      ST10000VN0004-1ZD101     SC60 PQ: 0 ANSI: 5
[   37.468915] got SATA disk[1]
[   37.472266] sd 1:0:0:0: [sata2] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
[   37.481214] sd 1:0:0:0: [sata2] 4096-byte physical blocks
[   37.487366] sd 1:0:0:0: [sata2] Write Protect is off
[   37.492907] sd 1:0:0:0: [sata2] Mode Sense: 00 3a 00 00
[   37.492945] sd 1:0:0:0: [sata2] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   37.580238]  sata2: p1 p2 p3
[   37.583808] sd 1:0:0:0: [sata2] Attached SCSI disk
[   37.591122] Freeing unused kernel memory: 924K
[   37.596086] Write protecting the kernel read-only data: 8192k
[   37.602792] Freeing unused kernel memory: 608K
[   37.608565] Freeing unused kernel memory: 288K
[   37.672831] ACPI: bus type USB registered
[   37.677345] usbcore: registered new interface driver usbfs
[   37.683487] usbcore: registered new interface driver hub
[   37.689452] usbcore: registered new interface driver ethub
[   37.695599] usbcore: registered new device driver usb
[   37.720560] xhci_hcd 0000:00:15.0: xHCI Host Controller
[   37.727494] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[   37.936887] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009010
[   37.946314] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[   37.946690] hub 1-0:1.0: USB hub found
[   37.950900] hub 1-0:1.0: 9 ports detected
[   37.955436]  port1 is going to power up Vbus by GPIO#29(ACTIVE_HIGH)
[   38.062554] host 0000:00:15.0 port 1 has Vbus GPIO#29 with polarity ACTIVE_HIGH
[   38.070971]  port2 is going to power up Vbus by GPIO#30(ACTIVE_HIGH)
[   38.178085] host 0000:00:15.0 port 2 has Vbus GPIO#30 with polarity ACTIVE_HIGH
[   38.187509] xhci_hcd 0000:00:15.0: xHCI Host Controller
[   38.193365] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[   38.201705] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   38.211034] hub 2-0:1.0: USB hub found
[   38.215250] hub 2-0:1.0: 7 ports detected
[   38.219793] host 0000:00:15.0 port 1 has Vbus GPIO#29 with polarity ACTIVE_HIGH
[   38.228220] host 0000:00:15.0 port 2 has Vbus GPIO#30 with polarity ACTIVE_HIGH
[   38.251775] geminilake_synobios: loading out-of-tree module taints kernel.
[   38.261054] geminilake_synobios: module license 'Synology Inc.' taints kernel.
[   38.269121] Disabling lock debugging due to kernel taint
[   38.286328] synobios open /dev/ttyS1 success
[   38.301379] correction with 0x00
[   38.305985] 2021-7-16 15:4:55 UTC
[   38.309687] synobios: load, major number 201
[   38.314460] Brand: Synology
[   38.317593] Model: DS-720+
[   38.320624] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   38.330062] synobios cpu_arch proc entry initialized
[   38.335601] synobios crypto_hw proc entry initialized
[   38.341240] synobios syno_platform proc entry initialized
[   38.352080] Module [geminilake_synobios] is removed.
[   38.361208] synobios: unload
[   38.514154] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[   38.778172] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[   38.919089] usb 1-2: new full-speed USB device number 3 using xhci_hcd
[   39.736548] usb 1-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
[   50.465455] random: nonblocking pool is initialized
[   50.536478] md: md0 stopped.
[   50.541128] md: bind<sata1p1>
[   50.544650] md: bind<sata2p1>
[   50.548251] md/raid1:md0: active with 2 out of 2 mirrors
[   50.565020] md0: detected capacity change from 0 to 2549940224
[   52.267770] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   52.299522] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[   56.835304] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   56.864267] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[   57.128958] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   57.149809] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[   57.349630] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[   57.369970] systemd[1]: Detected architecture x86-64.
[   57.385546] systemd[1]: Set hostname to <DS-SHUN>.
[   58.749587] systemd[1]: Cannot add dependency job for unit pkg-install-high-priority-builtin.service, ignoring: Unit pkg-install-high-priority-builtin.service failed to load: No such file or directory.
[   58.769669] systemd[1]: Cannot add dependency job for unit pkgctl-ffmpeg.service, ignoring: Unit pkgctl-ffmpeg.service failed to load: No such file or directory.
[   58.785813] systemd[1]: Cannot add dependency job for unit pkgctl-PhotoStation.service, ignoring: Unit pkgctl-PhotoStation.service failed to load: No such file or directory.
[   58.803106] systemd[1]: Cannot add dependency job for unit pkg-install-low-priority-builtin.service, ignoring: Unit pkg-install-low-priority-builtin.service failed to load: No such file or directory.
[   58.824678] systemd[1]: Created slice Root Slice.
[   58.834293] systemd[1]: Starting Root Slice.
[   58.839123] systemd[1]: Listening on udev Control Socket.
[   58.850286] systemd[1]: Starting udev Control Socket.
[   58.856060] systemd[1]: Created slice FileStation's slice.
[   58.867419] systemd[1]: Starting FileStation's slice.
[   58.873168] systemd[1]: Listening on Journal Audit Socket.
[   58.884522] systemd[1]: Starting Journal Audit Socket.
[   58.890384] systemd[1]: Created slice SynologyApplicationService's slice.
[   58.904167] systemd[1]: Starting SynologyApplicationService's slice.
[   58.911847] systemd[1]: Created slice ActiveInsight's slice.
[   58.923589] systemd[1]: Starting ActiveInsight's slice.
[   58.929548] systemd[1]: Created slice System Slice.
[   58.939558] systemd[1]: Starting System Slice.
[   58.944638] systemd[1]: Created slice Synology Swap Works.
[   58.955993] systemd[1]: Starting Synology Swap Works.
[   58.961765] systemd[1]: Created slice scemd.
[   58.970407] systemd[1]: Starting scemd.
[   58.974806] systemd[1]: Created slice User and Session Slice.
[   58.986748] systemd[1]: Starting User and Session Slice.
[   58.992773] systemd[1]: Listening on Journal Socket.
[   59.002980] systemd[1]: Starting Journal Socket.
[   59.015736] systemd[1]: Mounting Temporary Directory...
[   59.021755] systemd[1]: Created slice Synology DSM Storage Service.
[   59.032688] systemd[1]: Starting Synology DSM Storage Service.
[   59.045931] systemd[1]: Starting Link coredump path to volume if possible...
[   59.053986] systemd[1]: Created slice NFS.
[   59.064545] systemd[1]: Starting NFS.
[   59.072418] systemd[1]: Created slice RAID Resync Process. Including Resync, Repair and Reshape..
[   59.088538] systemd[1]: Starting RAID Resync Process. Including Resync, Repair and Reshape..
[   59.101089] systemd[1]: Starting unbind USB device...
[   59.106819] systemd[1]: Reached target Paths.
[   59.115521] systemd[1]: Starting Paths.
[   59.124344] systemd[1]: Starting Disabling fan checking flag ......
[   59.131537] systemd[1]: Created slice dsm6-ui-compatible's slice.
[   59.143441] systemd[1]: Starting dsm6-ui-compatible's slice.
[   59.155780] systemd[1]: Created slice MediaServer's slice.
[   59.167155] systemd[1]: Starting MediaServer's slice.
[   59.172903] systemd[1]: Created slice OAuthService's slice.
[   59.184473] systemd[1]: Starting OAuthService's slice.
[   59.190820] systemd[1]: Starting Set boot sequence config...
[   59.197215] systemd[1]: Reached target Slices.
[   59.206707] systemd[1]: Starting Slices.
[   59.215211] systemd[1]: Listening on udev Kernel Socket.
[   59.226195] systemd[1]: Starting udev Kernel Socket.
[   59.231883] systemd[1]: Created slice WebStation's slice.
[   59.243068] systemd[1]: Starting WebStation's slice.
[   59.248744] systemd[1]: Created slice SecureSignIn's slice.
[   59.260314] systemd[1]: Starting SecureSignIn's slice.
[   59.266174] systemd[1]: Created slice Package Center Slice.
[   59.277739] systemd[1]: Starting Package Center Slice.
[   59.284082] systemd[1]: Starting check integrity of rd.gz decompression...
[   59.292414] systemd[1]: Starting Set hostname...
[   59.303112] systemd[1]: Created slice synobackup daemon slice.
[   59.312887] systemd[1]: Starting synobackup daemon slice.
[   59.324679] systemd[1]: Created slice Shared Folder Sync.
[   59.335874] systemd[1]: Starting Shared Folder Sync.
[   59.341553] systemd[1]: Created slice OpenBSD Secure Shell server.
[   59.354511] systemd[1]: Starting OpenBSD Secure Shell server.
[   59.361069] systemd[1]: Created slice Synology Index slice (WAT).
[   59.373838] systemd[1]: Starting Synology Index slice (WAT).
[   59.380384] systemd[1]: Created slice BTRFS Optimization.
[   59.391570] systemd[1]: Starting BTRFS Optimization.
[   59.397806] systemd[1]: Starting Load ntb_brd module...
[   59.403908] systemd[1]: Created slice Synology DSM internal service.
[   59.414910] systemd[1]: Starting Synology DSM internal service.
[   59.427948] systemd[1]: Created slice CloudSync's slice.
[   59.438948] systemd[1]: Starting CloudSync's slice.
[   59.445478] systemd[1]: Starting Load Kernel Modules...
[   59.451511] systemd[1]: Created slice SSDP service.
[   59.460954] systemd[1]: Starting SSDP service.
[   59.470571] systemd[1]: Created slice SynologyPhotos's slice.
[   59.482535] systemd[1]: Starting SynologyPhotos's slice.
[   59.488513] systemd[1]: Reached target Swap.
[   59.497179] systemd[1]: Starting Swap.
[   59.501489] Monitor-Mwait will be used to enter C-1 state
[   59.501510] Monitor-Mwait will be used to enter C-2 state
[   59.501526] Monitor-Mwait will be used to enter C-3 state
[   59.501551] ACPI: acpi_idle registered with cpuidle
[   59.507701] systemd[1]: Mounting Debug File System...
[   59.514138] systemd[1]: Starting Synology swap...
[   59.522796] systemd[1]: Created slice r8152's slice.
[   59.531734] systemd[1]: Starting r8152's slice.
[   59.532360] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[   59.551057] systemd[1]: Created slice Docker's slice.
[   59.553394] flashcache: flashcache-1.0-2021-06-25-03:32 initialized
[   59.563736] systemd[1]: Starting Docker's slice.
[   59.569570] flashcache_syno: flashcache-1.0-syno-v25-pin-file-2021-06-25-03:32-debug initialized
[   59.583822] systemd[1]: Created slice SMBService's slice.
[   59.595030] systemd[1]: Starting SMBService's slice.
[   59.596193] NET: Registered protocol family 10
[   59.605832] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   59.607158] zram: Added device: zram0
[   59.607349] zram: Added device: zram1
[   59.607534] zram: Added device: zram2
[   59.607723] zram: Added device: zram3
[   59.612405] sit: IPv6 over IPv4 tunneling driver
[   59.635502] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   59.635571] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   59.652355] systemd[1]: Starting system-serial\x2dgetty.slice.
[   59.665701] systemd[1]: Starting Journal Socket (/dev/log).
[   59.672157] systemd[1]: Created slice Python2's slice.
[   59.682813] systemd[1]: Starting Python2's slice.
[   59.688241] systemd[1]: Created slice Synology Flashcache.
[   59.699638] systemd[1]: Starting Synology Flashcache.
[   59.705964] systemd[1]: Starting Synology Task Scheduler Init...
[   59.712935] systemd[1]: Created slice CodecPack's slice.
[   59.723689] systemd[1]: Starting CodecPack's slice.
[   59.734289] systemd[1]: Created slice Performance alarm.
[   59.745294] systemd[1]: Starting Performance alarm.
[   59.750921] systemd[1]: Created slice BTRFS Space Reclaim.
[   59.762333] systemd[1]: Starting BTRFS Space Reclaim.
[   59.768253] systemd[1]: Created slice ScsiTarget's slice.
[   59.768518] r8168 Gigabit Ethernet driver 8.045.12-NAPI loaded
[   59.768531] r8168 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[   59.774633]  Reinit 1 8001
[   59.774646]  Reinit 2 1
[   59.784331]  Reinit 1 8001
[   59.784344]  Reinit 2 1
[   59.784925] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[   59.784932] r8168  Copyright (C) 2017  Realtek NIC software team <nicfae@realtek.com>
                This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
                This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[   59.784943] r8168 Gigabit Ethernet driver 8.045.12-NAPI loaded
[   59.784951] r8168 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[   59.790992]  Reinit 1 8001
[   59.791005]  Reinit 2 1
[   59.800700]  Reinit 1 8001
[   59.800713]  Reinit 2 1
[   59.801250] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[   59.801253] r8168  Copyright (C) 2017  Realtek NIC software team <nicfae@realtek.com>
                This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
                This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[   59.895195] usb-storage 1-4:1.0: USB Mass Storage device detected
[   59.895338] scsi host4: usb-storage 1-4:1.0
[   59.895444] usbcore: registered new interface driver usb-storage
[   59.935493] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   59.953005] systemd[1]: Starting ScsiTarget's slice.
[   59.953566] ehci-pci: EHCI PCI platform driver
[   59.959496] uhci_hcd: USB Universal Host Controller Interface driver
[   59.970882] systemd[1]: Created slice SNMP.
[   59.979356] systemd[1]: Starting SNMP.
[   59.983701] systemd[1]: Created slice SynoFinder's slice.
[   59.994890] systemd[1]: Starting SynoFinder's slice.
[   60.000596] systemd[1]: Created slice Task Scheduler Group.
[   60.012174] systemd[1]: Starting Task Scheduler Group.
[   60.017981] systemd[1]: Reached target Timers.
[   60.027036] systemd[1]: Starting Timers.
[   60.036668] systemd[1]: Starting Set time zone information to kernel...
[   60.044242] systemd[1]: Created slice Synology DSM desktop service.
[   60.056794] systemd[1]: Starting Synology DSM desktop service.
[   60.069538] systemd[1]: Created slice HybridShare's slice.
[   60.080931] systemd[1]: Starting HybridShare's slice.
[   60.086703] systemd[1]: Created slice TextEditor's slice.
[   60.097935] systemd[1]: Starting TextEditor's slice.
[   60.103643] systemd[1]: Created slice Node.js_v12's slice.
[   60.115047] systemd[1]: Starting Node.js_v12's slice.
[   60.121478] systemd[1]: Mounted Debug File System.
[   60.131374] systemd[1]: Mounted Temporary Directory.
[   60.141999] systemd[1]: Started Link coredump path to volume if possible.
[   60.156100] systemd[1]: Started unbind USB device.
[   60.157727] md: md1 stopped.
[   60.169698] systemd[1]: Started Disabling fan checking flag ....
[   60.182542] systemd[1]: Started Set boot sequence config.
[   60.194103] systemd[1]: Started check integrity of rd.gz decompression.
[   60.208063] systemd[1]: Started Set hostname.
[   60.217163] systemd[1]: Started Load ntb_brd module.
[   60.227636] systemd[1]: Listening on Journal Socket (/dev/log).
[   60.240296] systemd[1]: Started Synology Task Scheduler Init.
[   60.252608] systemd[1]: Started Set time zone information to kernel.
[   60.266103] systemd[1]: Reached target Sockets.
[   60.275363] systemd[1]: Starting Sockets.
[   60.289244] md: bind<sata1p2>
[   60.292803] md: bind<sata2p2>
[   60.297332] md/raid1:md1: active with 2 out of 2 mirrors
[   60.302224] [drm] GuC: No firmware known for this platform!
[   60.302226] [drm] HuC: No firmware known for this platform!
[   60.309740] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   60.309741] [drm] Driver supports precise vblank timestamp query.
[   60.309880] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   60.311430] [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
[   60.351021] systemd[1]: Starting Journal Service...
[   60.356654] systemd[1]: Reached target Local File Systems.
[   60.366476] md1: detected capacity change from 0 to 2147418112
[   60.366499] systemd[1]: Starting Local File Systems.
[   60.367149] systemd[1]: Starting D-Bus System Message Bus...
[   60.390952] systemd[1]: Starting Set boot sequence config for temporary use...
[   60.403563] systemd[1]: Starting D-Bus Session Message Bus...
[   60.416327] systemd[1]: Starting udev Coldplug all Devices...
[   60.427390] systemd[1]: Starting Mount usb fs...
[   60.438906] systemd[1]: Started Journal Service.
[   60.501219] systemd-journald[5378]: Received request to flush runtime journal from PID 1
[   60.896459] scsi 4:0:0:0: Direct-Access     Synology DiskStation              DL17 PQ: 0 ANSI: 6
[   60.906565] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   60.907065] sd 4:0:0:0: [synoboot] 245760 512-byte logical blocks: (126 MB/120 MiB)
[   60.907893] sd 4:0:0:0: [synoboot] Write Protect is off
[   60.907895] sd 4:0:0:0: [synoboot] Mode Sense: 23 00 00 00
[   60.908709] sd 4:0:0:0: [synoboot] No Caching mode page found
[   60.908711] sd 4:0:0:0: [synoboot] Assuming drive cache: write through
[   60.914758] GPT:Primary header thinks Alt. header is not at the end of the disk.
[   60.914760] GPT:239649 != 245759
[   60.914760] GPT:Alternate GPT header not at the end of the disk.
[   60.914761] GPT:239649 != 245759
[   60.914761] GPT: Use GNU Parted to correct GPT errors.
[   60.914769]  synoboot: synoboot1 synoboot2
[   60.923752] sd 4:0:0:0: [synoboot] Attached SCSI disk
[   61.377580] [drm] failed to retrieve link info, disabling eDP
[   61.391896] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[   61.400852] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   61.409142] acpi device:50: registered as cooling_device4
[   61.415256] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input0
[   61.434938] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k
[   61.445105] zram0: detected capacity change from 0 to 909115392
[   61.455488] Adding 887804k swap on /dev/zram0.  Priority:1 extents:1 across:887804k SS
[   61.465310] zram1: detected capacity change from 0 to 909115392
[   61.475542] Adding 887804k swap on /dev/zram1.  Priority:1 extents:1 across:887804k SS
[   61.485542] zram2: detected capacity change from 0 to 909115392
[   61.495570] Adding 887804k swap on /dev/zram2.  Priority:1 extents:1 across:887804k SS
[   61.505369] zram3: detected capacity change from 0 to 909115392
[   61.515520] Adding 887804k swap on /dev/zram3.  Priority:1 extents:1 across:887804k SS
[   61.580283] [drm] Cannot find any crtc or sizes
[   61.586057] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   61.646374] r8168 0000:04:00.0 eth2: renamed from eth1
[   61.661519] r8168 0000:03:00.0 eth1: renamed from eth0
[   61.690500] r8168 0000:04:00.0 eth0: renamed from eth2
[   61.724054] usbcore: registered new interface driver usblp
[   61.811792] usbcore: registered new interface driver usbhid
[   61.818045] usbhid: USB HID core driver
[   61.879400] synobios open /dev/ttyS1 success
[   61.895572] correction with 0x00
[   61.900390] 2021-7-16 15:5:19 UTC
[   61.904088] synobios: load, major number 201
[   61.908864] Brand: Synology
[   61.911997] Model: DS-720+
[   61.915029] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   61.924467] synobios cpu_arch proc entry initialized
[   61.930005] synobios crypto_hw proc entry initialized
[   61.935649] synobios syno_platform proc entry initialized
[   61.979472] Syno_HddMon: Initialization completed.
[   62.038419] SSE version of gcm_enc/dec engaged.
[   64.755800] eth0: 0xffffc9000008c000, 00:11:32:df:a9:cd, IRQ 353
[   64.768317]  Reinit 1 8001
[   64.771496]  Reinit 2 1
[   64.784074]  Reinit 1 8001
[   64.787210]  Reinit 2 1
[   64.800650]  Reinit 1 8001
[   64.803773]  Reinit 2 1
[   64.834192] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   64.962380] eth1: 0xffffc90000088000, 00:11:32:df:a9:ce, IRQ 352
[   64.976976]  Reinit 1 8001
[   64.980596]  Reinit 2 1
[   64.999335]  Reinit 1 8001
[   65.005189]  Reinit 2 1
[   65.018006]  Reinit 1 8001
[   65.022709]  Reinit 2 1
[   65.053122] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   65.349305] RPC: Registered named UNIX socket transport module.
[   65.355938] RPC: Registered udp transport module.
[   65.361209] RPC: Registered tcp transport module.
[   65.366472] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   65.509594] raid6: sse2x1   gen()  4808 MB/s
[   65.530581] raid6: sse2x1   xor()  3042 MB/s
[   65.551573] raid6: sse2x2   gen()  5667 MB/s
[   65.572572] raid6: sse2x2   xor()  3570 MB/s
[   65.593568] raid6: sse2x4   gen()  6371 MB/s
[   65.614571] raid6: sse2x4   xor()  2705 MB/s
[   65.619340] raid6: using algorithm sse2x4 gen() 6371 MB/s
[   65.625371] raid6: .... xor() 2705 MB/s, rmw enabled
[   65.630914] raid6: using ssse3x2 recovery algorithm
[   65.754773] xor: measuring software checksum speed
[   65.769539]    prefetch64-sse:  7396.000 MB/sec
[   65.784536]    generic_sse:  6604.000 MB/sec
[   65.789306] xor: using function: prefetch64-sse (7396.000 MB/sec)
[   66.588872] Btrfs loaded, crc32c=crc32c-intel
[   66.749356] ip_tables: (C) 2000-2006 Netfilter Core Team
[   66.766799] audit: type=1325 audit(1626447923.866:2): table=filter family=2 entries=0
[   66.783753] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   66.870752] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   67.111928] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   67.131250] audit: type=1325 audit(1626447924.230:3): table=filter family=10 entries=0
[   67.155889] md: md4 stopped.
[   67.159626] md: bind<nvme0n1p1>
[   67.163242] md: bind<nvme1n1p1>
[   67.167924] md/raid1:md4: active with 2 out of 2 mirrors
[   67.173943] md4: detected capacity change from 0 to 118400745472
[   67.181444] md: md3 stopped.
[   67.191356] md: bind<sata2p3>
[   67.196015] md/raid1:md3: active with 1 out of 1 mirrors
[   67.247745] md3: detected capacity change from 0 to 9995893604352
[   67.280674] md: md2 stopped.
[   67.295086] md: bind<sata1p3>
[   67.323685] md/raid1:md2: active with 1 out of 1 mirrors
[   67.373134] md2: detected capacity change from 0 to 3995849261056
[   67.385556] audit: type=1325 audit(1626447924.485:4): table=filter family=2 entries=4
[   67.405596] audit: type=1325 audit(1626447924.505:5): table=filter family=2 entries=8
[   67.420778] audit: type=1325 audit(1626447924.520:6): table=filter family=2 entries=9
[   67.435642] audit: type=1325 audit(1626447924.535:7): table=filter family=2 entries=10
[   67.451519] audit: type=1325 audit(1626447924.551:8): table=filter family=2 entries=11
[   67.473084] audit: type=1325 audit(1626447924.572:9): table=filter family=2 entries=12
[   67.489038] audit: type=1325 audit(1626447924.588:10): table=filter family=10 entries=4
[   67.504149] audit: type=1325 audit(1626447924.603:11): table=filter family=10 entries=8
[   67.843567]  Reinit 1 8001
[   67.846691]  Reinit 2 1
[   67.856715] r8168: eth0: link up 1 Gbps
[   67.861071] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   70.414830] flashcache_syno: /dev/md3 exclude check success
[   70.437595] flashcache_syno: Preread max memmory count=2048
[   70.443826] flashcache_syno: Total pre-allocate bytes=67469312
[   70.450353] flashcache_syno: Check and init Jobs finish
[   70.456236] flashcache_syno: /dev/vg2/volume_1 exclude check success
[   70.463377] flashcache_syno: /dev/md4 exclude check success
[   70.471353] device-mapper: flashcache: Fast (clean) Shutdown Detected
[   70.478567] Both CLEAN and DIRTY blocks exist in cache
[   70.484116] flashcache_syno: Hash mapping = enable
[   70.489663] flashcache_syno: flashcache_writeback_load: md_blocks = 7040, md_sectors = 56320, md_block_size = 8

[   70.502582] device-mapper: flashcache: Allocate 43987KB (25B per) mem for 1801728-entry cache(capacity:112635MB, associativity:512, block size:128 sectors(64KB))
[   70.637569] device-mapper: flashcache: flashcache_writeback_load: Cache metadata loaded from disk with 383858 valid 1741 DIRTY blocks
[   70.714667] flashcache_syno: Create finish
[   71.783722] BTRFS: device label 2018.12.03-12:12:05 v23824 devid 1 transid 43906 /dev/mapper/cachedev_0
[   71.794382] BTRFS: device label 2017.12.05-09:25:02 v15217 devid 1 transid 14723431 /dev/mapper/cachedev_1
[   71.805592] BTRFS info (device dm-3): enabling auto syno reclaim space
[   71.812889] BTRFS info (device dm-3): use ssd allocation scheme
[   71.819512] BTRFS info (device dm-3): has skinny extents
[   71.825675] BTRFS info (device dm-2): enabling auto syno reclaim space
[   71.832977] BTRFS info (device dm-2): use ssd allocation scheme
[   71.839597] BTRFS info (device dm-2): using free space tree
[   71.845817] BTRFS info (device dm-2): has skinny extents
[   73.216224] audit_printk_skb: 6 callbacks suppressed
[   73.221832] audit: type=1325 audit(1626447930.316:14): table=nat family=2 entries=0
[   73.379718] audit: type=1325 audit(1626447930.480:15): table=filter family=2 entries=13
[   73.399577] audit: type=1325 audit(1626447930.500:16): table=filter family=10 entries=11
[   73.419832] audit: type=1325 audit(1626447930.520:17): table=filter family=2 entries=4
[   73.434800] audit: type=1325 audit(1626447930.535:18): table=filter family=2 entries=8
[   73.449545] audit: type=1325 audit(1626447930.550:19): table=filter family=2 entries=9
[   73.464415] audit: type=1325 audit(1626447930.565:20): table=filter family=2 entries=10
[   73.479357] audit: type=1325 audit(1626447930.580:21): table=filter family=2 entries=11
[   73.494512] audit: type=1325 audit(1626447930.595:22): table=filter family=2 entries=12
[   73.509578] audit: type=1325 audit(1626447930.610:23): table=filter family=10 entries=4
[   78.330706] loop: module loaded
[   78.635711] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   78.644545] NFSD: starting 90-second grace period (net ffffffff818b5300)
[   79.060936] Synotify use 16384 event queue size
[   79.066031] Synotify use 16384 event queue size
[   79.457340] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use)
[   79.920982] ata1.00 (slot 1): disabling queued TRIM support
[   79.922169] ata1.00 (slot 1): disabling queued TRIM support
[   79.922175] ata1.00 (slot 1): configured for UDMA/133
[   79.927827] ata1 (slot 1): EH complete
[   80.257213] ata2.00 (slot 2): disabling queued TRIM support
[   80.259644] ata2.00 (slot 2): disabling queued TRIM support
[   80.259651] ata2.00 (slot 2): configured for UDMA/133
[   80.265299] ata2 (slot 2): EH complete
[   80.345764] ata2.00 (slot 2): disabling queued TRIM support
[   80.348245] ata2.00 (slot 2): disabling queued TRIM support
[   80.348251] ata2.00 (slot 2): configured for UDMA/133
[   80.353907] ata2 (slot 2): EH complete
[   80.358229] sd 1:0:0:0: [sata2] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   80.773146] ext2: synoboot2 mounted, process=synopkicompatsy
[   80.785970] synoboot2 unmounted, process=synopkicompatsy
[   81.908035] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(001132dfa9ce).
[   81.937853] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized
[   81.964122] iSCSI:target_core_device.c:613:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
[   81.977381] iSCSI:target_core_configfs.c:5388:target_init_dbroot db_root: cannot open: /etc/target
[   81.987519] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
[   82.069561] iSCSI:target_core_file.c:149:fd_attach_hba RODSP plugin for fileio is enabled.
[   82.078806] iSCSI:target_core_file.c:156:fd_attach_hba ODX Token Manager is enabled.
[   82.087476] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled.
[   82.097501] iSCSI:target_core_ep.c:795:ep_attach_hba RODSP plugin for epio is enabled.
[   82.106397] iSCSI:target_core_ep.c:802:ep_attach_hba ODX Token Manager is enabled.
[   82.275065] workqueue: max_active 1024 requested for vhost_scsi is out of range, clamping between 1 and 512
[   83.112713] ext2: synoboot1 mounted, process=syno_bios_log_c
[   83.427034] vfat: synoboot1 mounted, process=syno_bios_log_c
[   83.531261] synoboot1 unmounted, process=syno_bios_log_c
[   83.866627] r8152: module verification failed: signature and/or required key missing - tainting kernel
[   83.879877] usbcore: registered new interface driver r8152
[   83.911422] 8021q: 802.1Q VLAN Support v1.8
[   84.012881] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   85.074522] Synotify use 16384 event queue size
[   85.079614] Synotify use 16384 event queue size
[   88.213927] aufs 4.4-20160328
[   88.214059] Synotify use 16384 event queue size
[   88.248481] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   88.318029] Bridge firewalling registered
[   88.329483] audit_printk_skb: 9 callbacks suppressed
[   88.335025] audit: type=1325 audit(1626447945.432:27): table=mangle family=2 entries=0
[   88.421590] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[   88.428437] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[   88.436635] IPVS: Creating netns size=2096 id=0
[   88.441702] IPVS: ipvs loaded.
[   88.479628] IPVS: [rr] scheduler registered.
[   89.538762] fuse init (API version 7.23)
[   89.876854] audit: type=1325 audit(1626447946.980:28): table=nat family=2 entries=5
[   89.893859] audit: type=1325 audit(1626447946.997:29): table=filter family=2 entries=13
[   89.911172] audit: type=1325 audit(1626447947.014:30): table=filter family=2 entries=15
[   89.928462] audit: type=1325 audit(1626447947.031:31): table=filter family=2 entries=17
[   89.946171] audit: type=1325 audit(1626447947.049:32): table=filter family=2 entries=19
[   89.963873] audit: type=1325 audit(1626447947.067:33): table=filter family=2 entries=20
[   89.977304] audit: type=1325 audit(1626447947.080:34): table=filter family=2 entries=21
[   89.996030] Initializing XFRM netlink socket
[   90.011901] Netfilter messages via NETLINK v0.30.
[   90.027294] audit: type=1325 audit(1626447947.130:35): table=nat family=2 entries=7
[   90.044965] audit: type=1325 audit(1626447947.148:36): table=nat family=2 entries=11
[   90.139225] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[   95.853864] netif_napi_add() called with weight 256 on device eth%d
[   95.861140] r8152 2-1:1.0 eth2: v2.15.0 (2021/04/15)
[   95.866691] r8152 2-1:1.0 eth2: This product is covered by one or more of the following patents:
                        US6,570,884, US6,115,776, and US6,327,625.

[   95.884073] r8152 2-1:1.0 eth2: chip rev 14
[   96.712316] audit_printk_skb: 87 callbacks suppressed
[   96.717981] audit: type=1325 audit(1626447953.816:66): table=filter family=2 entries=35
[   96.733580] audit: type=1325 audit(1626447953.838:67): table=filter family=2 entries=39
[   96.976549] audit: type=1325 audit(1626447954.081:68): table=filter family=2 entries=40
[   96.994002] audit: type=1325 audit(1626447954.098:69): table=filter family=2 entries=39
[   98.941692] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[   99.379040] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[   99.386279] r8152 2-1:1.0 eth2: carrier on
[  101.091058] audit: type=1325 audit(1626447958.196:70): table=filter family=2 entries=35
[  101.301489] audit: type=1325 audit(1626447958.406:71): table=filter family=2 entries=26
[  101.319765] audit: type=1325 audit(1626447958.425:72): table=filter family=10 entries=11
[  101.338471] audit: type=1325 audit(1626447958.443:73): table=filter family=2 entries=17
[  101.352506] audit: type=1325 audit(1626447958.457:74): table=filter family=2 entries=21
[  101.366588] audit: type=1325 audit(1626447958.471:75): table=filter family=2 entries=22
[  105.915698] Synotify use 16384 event queue size
[  247.527642] audit_printk_skb: 21 callbacks suppressed
[  247.533340] audit: type=1325 audit(1626448104.657:83): table=filter family=2 entries=26
[  247.548102] audit: type=1325 audit(1626448104.678:84): table=filter family=2 entries=30
[  247.790328] audit: type=1325 audit(1626448104.920:85): table=filter family=2 entries=31
[  247.805503] audit: type=1325 audit(1626448104.935:86): table=filter family=2 entries=30
[  355.197714] Synotify use 16384 event queue size

Output of lsusb command

|__usb1          1d6b:0002:0404 09  2.00  480MBit/s 0mA 1IF  (Linux 4.4.180+ xhci-hcd xHCI Host Controller 0000:00:15.0) hub
  |__1-2         0463:ffff:0100 00  1.10   12MBit/s 20mA 1IF  (EATON SANTAK TG-BOX Blank)
  |__1-4         f400:f400:0100 00  2.00  480MBit/s 200mA 1IF  (Synology DiskStation 7F000AFF1E345A82)
|__usb2          1d6b:0003:0404 09  3.00 5000MBit/s 0mA 1IF  (Linux 4.4.180+ xhci-hcd xHCI Host Controller 0000:00:15.0) hub
  |__2-1         0bda:8156:3100 00  3.20 5000MBit/s 256mA 1IF  (Realtek USB 10/100/1G/2.5G LAN 0013000001)

Output of ifconfig -a command

docker0   Link encap:Ethernet  HWaddr 02:42:94:E7:58:46
          inet addr:172.17.0.1  Bcast:172.17.255.255  Mask:255.255.0.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

eth0      Link encap:Ethernet  HWaddr 00:11:32:DF:A9:CD
          inet addr:192.168.1.120  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::211:32ff:fedf:a9cd/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:19743 errors:0 dropped:0 overruns:0 frame:0
          TX packets:29290 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:4244616 (4.0 MiB)  TX bytes:16424264 (15.6 MiB)
          Interrupt:97 base 0xc000

eth1      Link encap:Ethernet  HWaddr 00:11:32:DF:A9:CE
          inet addr:169.254.133.181  Bcast:169.254.255.255  Mask:255.255.0.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:96 base 0x8000

eth2      Link encap:Ethernet  HWaddr 00:E0:4C:68:09:B9
          inet addr:192.168.1.248  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::2e0:4cff:fe68:9b9/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:9000  Metric:1
          RX packets:145241 errors:0 dropped:0 overruns:0 frame:0
          TX packets:245047 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:7665207 (7.3 MiB)  TX bytes:2156383288 (2.0 GiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:4790 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4790 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:866828 (846.5 KiB)  TX bytes:866828 (846.5 KiB)

sit0      Link encap:IPv6-in-IPv4
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
bb-qq commented 3 years ago

Assigning the same subnet to multiple NICs may result in an unintended NIC being used, regardless of the default gateway. I would recommend assigning different subnets to each NIC.