DS920+ not seeing nic in virtual machine manager.

[Oq6Jw1Oi4jHR1L]

Description of the problem

I installed an USB 3.0 2.5G NIC and it shows up in the main networking but I am not able to select it from the list of available adapters in virtual machine manager.

Description of your products

• DS920+
  • Linux daemonx 4.4.180+ #42218 SMP Mon Oct 18 19:16:55 CST 2021 x86_64 GNU/Linux synology_geminilake_920+
  • DSM version DSM 7.0.1-42218
• EDUP 2.5G USB C & USB 3.0 to Ethernet Adapter RJ45 Gigabit LAN

Description of your environment

Output of dmesg command

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.180+ (root@build13) (gcc version 7.5.0 (GCC) ) #42218 SMP Mon Oct 18 19:16:55 CST 2021
[    0.000000] Command line: root=/dev/md0 intel_iommu=igfx_off netif_num=2 HddEnableDynamicPower=1 syno_hw_version=DS920+ vender_format_version=2 synoboot2 sn=2070SBRMSMVES macs=001132d50b97,001132d50b98 syno_ttyS0=pciserial,0x0:0x18.0x2,115200 syno_ttyS1=pciserial,0x0:0x18.0x0,115200
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] x86/fpu: xstate_offset[3]:  960, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
[    0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 1088 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000012151000-0x0000000070f9dfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000070f9e000-0x000000007149dfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007149e000-0x000000007789dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007789e000-0x0000000077a9dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000077a9e000-0x0000000077addfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000077ade000-0x0000000078d5efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078d5f000-0x000000007965efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007965f000-0x0000000079bfffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079c00000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000057fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x01de9fb8-0x01de9fc7] usable ==> usable
[    0.000000] e820: update [mem 0x59b62040-0x59b62989] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x0000000000085fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000086000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000001de9fb7] usable
[    0.000000] reserve setup_data: [mem 0x0000000001de9fb8-0x0000000001de9fc7] usable
[    0.000000] reserve setup_data: [mem 0x0000000001de9fc8-0x000000000fffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000010000000-0x0000000012150fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000012151000-0x0000000059b6203f] usable
[    0.000000] reserve setup_data: [mem 0x0000000059b62040-0x0000000059b62989] usable
[    0.000000] reserve setup_data: [mem 0x0000000059b6298a-0x0000000070f9dfff] usable
[    0.000000] reserve setup_data: [mem 0x0000000070f9e000-0x000000007149dfff] type 20
[    0.000000] reserve setup_data: [mem 0x000000007149e000-0x000000007789dfff] reserved
[    0.000000] reserve setup_data: [mem 0x000000007789e000-0x0000000077a9dfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000077a9e000-0x0000000077addfff] ACPI data
[    0.000000] reserve setup_data: [mem 0x0000000077ade000-0x0000000078d5efff] usable
[    0.000000] reserve setup_data: [mem 0x0000000078d5f000-0x000000007965efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000007965f000-0x0000000079bfffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000079c00000-0x000000007fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000057fffffff] usable
[    0.000000] efi: EFI v2.60 by INSYDE Corp.
[    0.000000] efi:  ACPI=0x77add000  ACPI 2.0=0x77add014  SMBIOS=0x74b45000  SMBIOS 3.0=0x74b43000  ESRT=0x74b46218
[    0.000000] esrt: Reserving ESRT space from 0x0000000074b46218 to 0x0000000074b46250.
[    0.000000] SMBIOS 3.0.1 present.
[    0.000000] Kernel/User page tables isolation: disabled
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x580000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00FF800000 mask 7FFF800000 write-combining
[    0.000000]   1 base 0000000000 mask 7F80000000 write-back
[    0.000000]   2 base 007A000000 mask 7FFE000000 uncachable
[    0.000000]   3 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   4 base 0100000000 mask 7F00000000 write-back
[    0.000000]   5 base 0200000000 mask 7E00000000 write-back
[    0.000000]   6 base 0400000000 mask 7F00000000 write-back
[    0.000000]   7 base 0500000000 mask 7F80000000 write-back
[    0.000000]   8 base 0090000000 mask 7FF0000000 write-combining
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC
[    0.000000] e820: last_pfn = 0x79c00 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff88000007a000] 7a000 size 28672
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x01a7c000, 0x01a7cfff] PGTABLE
[    0.000000] BRK [0x01a7d000, 0x01a7dfff] PGTABLE
[    0.000000] BRK [0x01a7e000, 0x01a7efff] PGTABLE
[    0.000000] BRK [0x01a7f000, 0x01a7ffff] PGTABLE
[    0.000000] BRK [0x01a80000, 0x01a80fff] PGTABLE
[    0.000000] BRK [0x01a81000, 0x01a81fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x375dd000-0x37ae5fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x0000000077ADD014 000024 (v02 INSYDE)
[    0.000000] ACPI: XSDT 0x0000000077AB6188 0000F4 (v01 INSYDE INSYDE   00000003      01000013)
[    0.000000] ACPI: FACP 0x0000000077AD3000 000114 (v06 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x0000000077AC1000 00AE45 (v02 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: FACS 0x0000000077A97000 000040
[    0.000000] ACPI: FACS 0x0000000077A97000 000040
[    0.000000] ACPI: UEFI 0x0000000077ADC000 000236 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x0000000077ADB000 000042 (v01 INSYDE INSYDE   00000002 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x0000000077ADA000 000781 (v01 INSYDE Tpm2Tabl 00001000 ACPI 00040000)
[    0.000000] ACPI: TPM2 0x0000000077AD9000 000034 (v04 INSYDE INSYDE   00000002 ACPI 00040000)
[    0.000000] ACPI: BDAT 0x0000000077AD7000 000030 (v02 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.000000] ACPI: HPET 0x0000000077AD2000 000038 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x0000000077AD1000 00005C (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: APIC 0x0000000077AD0000 000084 (v03 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x0000000077ACF000 00003C (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: NPKT 0x0000000077ACE000 000065 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: PRAM 0x0000000077ACD000 000030 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: WSMT 0x0000000077ACC000 000028 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x0000000077ABE000 000271 (v02 INSYDE UsbCTabl 00000003 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x0000000077ABD000 000937 (v01 INSYDE Platform 00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x0000000077ABC000 000583 (v02 INSYDE Cpu0Ist  00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x0000000077ABB000 00072B (v02 INSYDE CpuSsdt  00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x0000000077ABA000 00032D (v02 INSYDE Cpu0Tst  00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x0000000077AB9000 00017C (v02 INSYDE ApTst    00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x0000000077AB3000 00274C (v02 INSYDE SaSsdt   00003000 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x0000000077AB8000 000044 (v01 INSYDE INSYDE   00000002 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x0000000077AC0000 000038 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x0000000077AD5000 000034 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: DBG2 0x0000000077AD6000 000072 (v00 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x0000000077AD4000 0000A8 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: WDAT 0x0000000077ABF000 000104 (v01 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000057fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x0000000000085fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000012151000-0x0000000070f9dfff]
[    0.000000]   node   0: [mem 0x0000000077ade000-0x0000000078d5efff]
[    0.000000]   node   0: [mem 0x000000007965f000-0x0000000079bfffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000057fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000057fffffff]
[    0.000000] On node 0 totalpages: 5178867
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 23 pages reserved
[    0.000000]   DMA zone: 3972 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7130 pages used for memmap
[    0.000000]   DMA32 zone: 456303 pages, LIFO batch:31
[    0.000000]   Normal zone: 73728 pages used for memmap
[    0.000000]   Normal zone: 4718592 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SYNO Spinup Group 0: 2
[    0.000000] SYNO Spinup Group 1: 1
[    0.000000] SYNO Spinup Group 2: 1
[    0.000000] SYNO Spinup Group Delay: 11
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00086000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x01de9000-0x01de9fff]
[    0.000000] PM: Registered nosave memory: [mem 0x01de9000-0x01de9fff]
[    0.000000] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
[    0.000000] PM: Registered nosave memory: [mem 0x59b62000-0x59b62fff]
[    0.000000] PM: Registered nosave memory: [mem 0x59b62000-0x59b62fff]
[    0.000000] PM: Registered nosave memory: [mem 0x70f9e000-0x7149dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7149e000-0x7789dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7789e000-0x77a9dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x77a9e000-0x77addfff]
[    0.000000] PM: Registered nosave memory: [mem 0x78d5f000-0x7965efff]
[    0.000000] PM: Registered nosave memory: [mem 0x79c00000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xd3708fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd3709000-0xd3709fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd370a000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xff7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xd3708fff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88057fc00000 s95128 r8192 d31848 u524288
[    0.000000] pcpu-alloc: s95128 r8192 d31848 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 5097922
[    0.000000] Kernel command line: root=/dev/md0 intel_iommu=igfx_off netif_num=2 HddEnableDynamicPower=1 syno_hw_version=DS920+ vender_format_version=2 synoboot2 sn=2070SBRMSMVES macs=001132d50b97,001132d50b98 syno_ttyS0=pciserial,0x0:0x18.0x2,115200 syno_ttyS1=pciserial,0x0:0x18.0x0,115200
[    0.000000] DMAR: Disable GFX device mapping
[    0.000000] Internal netif num: 2
[    0.000000] Support HDD Dynamic Power.
[    0.000000] Synology Hardware Version: DS920+
[    0.000000] Vender format version: 2
[    0.000000] Serial Number: 2070SBRMSMVES
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[    0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.000000] Memory: 20201732K/20715468K available (5556K kernel code, 867K rwdata, 1780K rodata, 976K init, 664K bss, 513736K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:4352 nr_irqs:1024 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: PIT calibration matches HPET. 1 loops
[    0.000000] tsc: Detected 1997.158 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3994.31 BogoMIPS (lpj=1997158)
[    0.011883] pid_max: default: 32768 minimum: 301
[    0.017049] ACPI: Core revision 20150930
[    0.035309] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.047088] Security Framework initialized
[    0.051518] AppArmor: AppArmor initialized
[    0.056097] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.063785] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.072473] Initializing cgroup subsys io
[    0.076800] Initializing cgroup subsys memory
[    0.081669] Initializing cgroup subsys devices
[    0.086674] Initializing cgroup subsys freezer
[    0.091671] CPU: Physical Processor ID: 0
[    0.096078] CPU: Processor Core ID: 0
[    0.108224] CPU0: Thermal monitoring enabled (TM1)
[    0.113459] process: using mwait in idle threads
[    0.118582] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.124520] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.131150] Speculative Store Bypass: Vulnerable
[    0.138390] Freeing SMP alternatives memory: 24K
[    0.150305] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.166855] TSC deadline timer enabled
[    0.166864] smpboot: CPU0: Intel(R) Celeron(R) J4125 CPU @ 2.00GHz (family: 0x6, model: 0x7a, stepping: 0x8)
[    0.177720] Performance Events: PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.
[    0.188972] ... version:                4
[    0.193448] ... bit width:              48
[    0.198024] ... generic registers:      4
[    0.202504] ... value mask:             0000ffffffffffff
[    0.208445] ... max period:             00007fffffffffff
[    0.214386] ... fixed-purpose events:   3
[    0.218866] ... event mask:             000000070000000f
[    0.225276] x86: Booting SMP configuration:
[    0.229769] .... node  #0, CPUs:      #1 #2 #3
[    0.266474] x86: Booted up 1 node, 4 CPUs
[    0.270966] smpboot: Total of 4 processors activated (15977.26 BogoMIPS)
[    0.283787] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.292931] devtmpfs: initialized
[    0.296956] PM: Registering ACPI NVS region [mem 0x7789e000-0x77a9dfff] (2097152 bytes)
[    0.305854] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.316646] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.323682] pinctrl core: initialized pinctrl subsystem
[    0.329659] NET: Registered protocol family 16
[    0.341468] cpuidle: using governor ladder
[    0.352879] cpuidle: using governor menu
[    0.357196] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.365552] ACPI: bus type PCI registered
[    0.370118] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.380455] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.388056] PCI: Using configuration type 1 for base access
[    0.400804] ACPI: Added _OSI(Module Device)
[    0.405300] ACPI: Added _OSI(Processor Device)
[    0.410265] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.415524] ACPI: Added _OSI(Processor Aggregator Device)
[    0.426283] ACPI: Executed 3 blocks of module-level executable AML code
[    0.444078] ACPI: Dynamic OEM Table Load:
[    0.448379] ACPI: SSDT 0xFFFF880567469800 000102 (v02 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.458783] ACPI: Dynamic OEM Table Load:
[    0.463081] ACPI: SSDT 0xFFFF880567469A00 00015F (v02 PmRef  ApIst    00003000 INTL 20130117)
[    0.473295] ACPI: Dynamic OEM Table Load:
[    0.477592] ACPI: SSDT 0xFFFF8805678239C0 00008D (v02 PmRef  ApCst    00003000 INTL 20130117)
[    0.488536] ACPI: Interpreter enabled
[    0.492464] ACPI: (supports S0 S4 S5)
[    0.496534] ACPI: Using IOAPIC for interrupt routing
[    0.502129] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.513223] ACPI: Power Resource [DRST] (on)
[    0.518113] ACPI: Power Resource [DRST] (on)
[    0.523008] ACPI: Power Resource [DRST] (on)
[    0.527892] ACPI: Power Resource [DRST] (on)
[    0.532765] ACPI: Power Resource [DRST] (on)
[    0.537646] ACPI: Power Resource [DRST] (on)
[    0.546274] ACPI: Power Resource [WRST] (on)
[    0.554553] ACPI: Power Resource [FN00] (on)
[    0.559711] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.566450] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.576324] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    0.583934] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.593090] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.605009] PCI host bridge to bus 0000:00
[    0.609451] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.616364] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.623961] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.631556] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.639153] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.647529] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.655907] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.664282] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
[    0.672657] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window]
[    0.681032] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[    0.689409] pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window]
[    0.697788] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
[    0.706161] pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window]
[    0.714537] pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window]
[    0.722913] pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window]
[    0.731288] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window]
[    0.739664] pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window]
[    0.748039] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window]
[    0.756414] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window]
[    0.764790] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.770938] pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000
[    0.771280] pci 0000:00:02.0: [8086:3185] type 00 class 0x030000
[    0.771301] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
[    0.771309] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.771315] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.771654] pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000
[    0.771700] pci 0000:00:0f.0: reg 0x10: [mem 0xa1412000-0xa1412fff 64bit]
[    0.771798] pci 0000:00:0f.0: PME# supported from D3hot
[    0.772093] pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601
[    0.772118] pci 0000:00:12.0: reg 0x10: [mem 0xa1410000-0xa1411fff]
[    0.772127] pci 0000:00:12.0: reg 0x14: [mem 0xa141b000-0xa141b0ff]
[    0.772136] pci 0000:00:12.0: reg 0x18: [io  0x4080-0x4087]
[    0.772145] pci 0000:00:12.0: reg 0x1c: [io  0x4088-0x408b]
[    0.772154] pci 0000:00:12.0: reg 0x20: [io  0x4060-0x407f]
[    0.772162] pci 0000:00:12.0: reg 0x24: [mem 0xa1419000-0xa14197ff]
[    0.772196] pci 0000:00:12.0: PME# supported from D3hot
[    0.772448] pci 0000:00:13.0: [8086:31d8] type 01 class 0x060400
[    0.772522] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[    0.772739] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.778936] pci 0000:00:13.2: [8086:31da] type 01 class 0x060400
[    0.779011] pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
[    0.779226] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.785422] pci 0000:00:13.3: [8086:31db] type 01 class 0x060400
[    0.785494] pci 0000:00:13.3: PME# supported from D0 D3hot D3cold
[    0.785711] pci 0000:00:13.3: System wakeup disabled by ACPI
[    0.791919] pci 0000:00:14.0: [8086:31d6] type 01 class 0x060400
[    0.791992] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[    0.792213] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.798408] pci 0000:00:14.1: [8086:31d7] type 01 class 0x060400
[    0.798481] pci 0000:00:14.1: PME# supported from D0 D3hot D3cold
[    0.798698] pci 0000:00:14.1: System wakeup disabled by ACPI
[    0.804914] pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330
[    0.804943] pci 0000:00:15.0: reg 0x10: [mem 0xa1400000-0xa140ffff 64bit]
[    0.805005] pci 0000:00:15.0: PME# supported from D3hot D3cold
[    0.805225] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.811445] pci 0000:00:16.0: [8086:31ac] type 00 class 0x118000
[    0.811476] pci 0000:00:16.0: reg 0x10: [mem 0xa1413000-0xa1413fff 64bit]
[    0.811491] pci 0000:00:16.0: reg 0x18: [mem 0xa1414000-0xa1414fff 64bit]
[    0.811811] pci 0000:00:18.0: [8086:31bc] type 00 class 0x118000
[    0.811840] pci 0000:00:18.0: reg 0x10: [mem 0xa1415000-0xa1415fff 64bit]
[    0.811855] pci 0000:00:18.0: reg 0x18: [mem 0xa1416000-0xa1416fff 64bit]
[    0.812149] pci 0000:00:18.2: [8086:31c0] type 00 class 0x118000
[    0.812179] pci 0000:00:18.2: reg 0x10: [mem 0xa1417000-0xa1417fff 64bit]
[    0.812194] pci 0000:00:18.2: reg 0x18: [mem 0xa1418000-0xa1418fff 64bit]
[    0.812539] pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100
[    0.812935] pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500
[    0.812998] pci 0000:00:1f.1: reg 0x10: [mem 0xa141a000-0xa141a0ff 64bit]
[    0.813079] pci 0000:00:1f.1: reg 0x20: [io  0x4040-0x405f]
[    0.813479] pci 0000:01:00.0: [1b4b:9235] type 00 class 0x010601
[    0.813509] pci 0000:01:00.0: reg 0x10: [io  0x3028-0x302f]
[    0.813520] pci 0000:01:00.0: reg 0x14: [io  0x3034-0x3037]
[    0.813530] pci 0000:01:00.0: reg 0x18: [io  0x3020-0x3027]
[    0.813540] pci 0000:01:00.0: reg 0x1c: [io  0x3030-0x3033]
[    0.813550] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x301f]
[    0.813560] pci 0000:01:00.0: reg 0x24: [mem 0xa1300000-0xa13007ff]
[    0.813570] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.813611] pci 0000:01:00.0: PME# supported from D3hot
[    0.813649] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.821819] pci 0000:00:13.0: PCI bridge to [bus 01]
[    0.827197] pci 0000:00:13.0:   bridge window [io  0x3000-0x3fff]
[    0.827201] pci 0000:00:13.0:   bridge window [mem 0xa1300000-0xa13fffff]
[    0.827267] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.827310] pci 0000:02:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.827337] pci 0000:02:00.0: reg 0x18: [mem 0xa1204000-0xa1204fff 64bit]
[    0.827354] pci 0000:02:00.0: reg 0x20: [mem 0xa1200000-0xa1203fff 64bit]
[    0.827425] pci 0000:02:00.0: supports D1 D2
[    0.827428] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.827488] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.835656] pci 0000:00:13.2: PCI bridge to [bus 02]
[    0.841032] pci 0000:00:13.2:   bridge window [io  0x2000-0x2fff]
[    0.841036] pci 0000:00:13.2:   bridge window [mem 0xa1200000-0xa12fffff]
[    0.841102] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.841144] pci 0000:03:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.841171] pci 0000:03:00.0: reg 0x18: [mem 0xa1104000-0xa1104fff 64bit]
[    0.841189] pci 0000:03:00.0: reg 0x20: [mem 0xa1100000-0xa1103fff 64bit]
[    0.841259] pci 0000:03:00.0: supports D1 D2
[    0.841261] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.841323] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.849491] pci 0000:00:13.3: PCI bridge to [bus 03]
[    0.854861] pci 0000:00:13.3:   bridge window [io  0x1000-0x1fff]
[    0.854866] pci 0000:00:13.3:   bridge window [mem 0xa1100000-0xa11fffff]
[    0.854932] pci 0000:04:00.0: [144d:a808] type 00 class 0x010802
[    0.854977] pci 0000:04:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[    0.855032] pci 0000:04:00.0: Max Payload Size set to 256 (was 128, max 256)
[    0.862888] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.919205] pci 0000:00:14.0: PCI bridge to [bus 04]
[    0.924641] pci 0000:05:00.0: [144d:a808] type 00 class 0x010802
[    0.924687] pci 0000:05:00.0: reg 0x10: [mem 0xa1000000-0xa1003fff 64bit]
[    0.924845] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.933014] pci 0000:00:14.1: PCI bridge to [bus 05]
[    0.938387] pci 0000:00:14.1:   bridge window [mem 0xa1000000-0xa10fffff]
[    0.938414] pci_bus 0000:00: on NUMA node 0
[    0.939251] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.948103] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.957060] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.966020] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.974981] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.983941] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.992905] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.001860] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.012201] ACPI: Enabled 3 GPEs in block 00 to 7F
[    1.017518] vgaarb: setting as boot device: PCI:0000:00:02.0
[    1.023702] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.032770] vgaarb: loaded
[    1.035779] vgaarb: bridge control possible 0000:00:02.0
[    1.041806] SCSI subsystem initialized
[    1.045982] libata version 3.00 loaded.
[    1.046050] pps_core: LinuxPPS API ver. 1 registered
[    1.051467] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.061700] PTP clock support registered
[    1.066179] EFI Variables Facility v0.08 2004-May-17
[    1.129869] pstore: Registered efi as persistent store backend
[    1.136229] PCI: Using ACPI for IRQ routing
[    1.147416] PCI: pci_cache_line_size set to 64 bytes
[    1.147524] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    1.147527] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[    1.147529] e820: reserve RAM buffer [mem 0x01de9fb8-0x03ffffff]
[    1.147531] e820: reserve RAM buffer [mem 0x59b62040-0x5bffffff]
[    1.147533] e820: reserve RAM buffer [mem 0x70f9e000-0x73ffffff]
[    1.147534] e820: reserve RAM buffer [mem 0x78d5f000-0x7bffffff]
[    1.147536] e820: reserve RAM buffer [mem 0x79c00000-0x7bffffff]
[    1.147843] clocksource: Switched to clocksource hpet
[    1.163057] AppArmor: AppArmor Filesystem Enabled
[    1.168241] pnp: PnP ACPI init
[    1.171688] system 00:00: [io  0x0680-0x069f] has been reserved
[    1.178186] system 00:00: [io  0x0400-0x047f] has been reserved
[    1.184807] system 00:00: [io  0x0500-0x05fe] has been reserved
[    1.191433] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.192101] system 00:01: [mem 0xe0000000-0xefffffff] could not be reserved
[    1.199726] system 00:01: [mem 0xfea00000-0xfeafffff] has been reserved
[    1.207126] system 00:01: [mem 0xfed01000-0xfed01fff] has been reserved
[    1.214528] system 00:01: [mem 0xfed03000-0xfed03fff] has been reserved
[    1.221927] system 00:01: [mem 0xfed06000-0xfed06fff] has been reserved
[    1.229332] system 00:01: [mem 0xfed08000-0xfed09fff] has been reserved
[    1.236733] system 00:01: [mem 0xfed80000-0xfedbffff] has been reserved
[    1.244135] system 00:01: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    1.251537] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[    1.258943] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.259198] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.259383] pnp: PnP ACPI: found 3 devices
[    1.273068] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.282881] pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    1.293981] pci 0000:00:14.0: BAR 14: assigned [mem 0x80000000-0x800fffff]
[    1.301636] pci 0000:01:00.0: BAR 6: assigned [mem 0xa1310000-0xa131ffff pref]
[    1.309717] pci 0000:00:13.0: PCI bridge to [bus 01]
[    1.315269] pci 0000:00:13.0:   bridge window [io  0x3000-0x3fff]
[    1.322090] pci 0000:00:13.0:   bridge window [mem 0xa1300000-0xa13fffff]
[    1.329686] pci 0000:00:13.2: PCI bridge to [bus 02]
[    1.335232] pci 0000:00:13.2:   bridge window [io  0x2000-0x2fff]
[    1.342052] pci 0000:00:13.2:   bridge window [mem 0xa1200000-0xa12fffff]
[    1.349651] pci 0000:00:13.3: PCI bridge to [bus 03]
[    1.355200] pci 0000:00:13.3:   bridge window [io  0x1000-0x1fff]
[    1.362017] pci 0000:00:13.3:   bridge window [mem 0xa1100000-0xa11fffff]
[    1.369621] pci 0000:04:00.0: BAR 0: assigned [mem 0x80000000-0x80003fff 64bit]
[    1.377826] pci 0000:00:14.0: PCI bridge to [bus 04]
[    1.383348] pci 0000:00:14.0:   bridge window [mem 0x80000000-0x800fffff]
[    1.390948] pci 0000:00:14.1: PCI bridge to [bus 05]
[    1.396496] pci 0000:00:14.1:   bridge window [mem 0xa1000000-0xa10fffff]
[    1.404096] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    1.404098] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    1.404101] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    1.404103] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    1.404105] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    1.404107] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    1.404110] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    1.404112] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
[    1.404114] pci_bus 0000:00: resource 12 [mem 0x80000000-0xbfffffff window]
[    1.404116] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xefffffff window]
[    1.404121] pci_bus 0000:00: resource 14 [mem 0xfea00000-0xfeafffff window]
[    1.404123] pci_bus 0000:00: resource 15 [mem 0xfed00000-0xfed003ff window]
[    1.404126] pci_bus 0000:00: resource 16 [mem 0xfed01000-0xfed01fff window]
[    1.404128] pci_bus 0000:00: resource 17 [mem 0xfed03000-0xfed03fff window]
[    1.404130] pci_bus 0000:00: resource 18 [mem 0xfed06000-0xfed06fff window]
[    1.404132] pci_bus 0000:00: resource 19 [mem 0xfed08000-0xfed09fff window]
[    1.404134] pci_bus 0000:00: resource 20 [mem 0xfed80000-0xfedbffff window]
[    1.404137] pci_bus 0000:00: resource 21 [mem 0xfed1c000-0xfed1cfff window]
[    1.404139] pci_bus 0000:00: resource 22 [mem 0xfee00000-0xfeefffff window]
[    1.404142] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    1.404144] pci_bus 0000:01: resource 1 [mem 0xa1300000-0xa13fffff]
[    1.404147] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    1.404149] pci_bus 0000:02: resource 1 [mem 0xa1200000-0xa12fffff]
[    1.404151] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    1.404153] pci_bus 0000:03: resource 1 [mem 0xa1100000-0xa11fffff]
[    1.404155] pci_bus 0000:04: resource 1 [mem 0x80000000-0x800fffff]
[    1.404158] pci_bus 0000:05: resource 1 [mem 0xa1000000-0xa10fffff]
[    1.404197] NET: Registered protocol family 2
[    1.409150] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[    1.418126] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.425724] TCP: Hash tables configured (established 262144 bind 65536)
[    1.432989] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[    1.439986] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[    1.447448] NET: Registered protocol family 1
[    1.452180] pci 0000:00:02.0: Video device with shadowed ROM
[    1.453847] pci 0000:01:00.0: Apply mv9235 specific programming steps
[    1.460900] PCI: CLS 64 bytes, default 64
[    1.656129] Trying to unpack rootfs image as initramfs...
[    3.065386] decompress cpio completed and skip redundant lzma
[    3.072942] Freeing initrd memory: 5156K
[    3.077186] DMAR: Host address width 39
[    3.081456] DMAR: DRHD base: 0x000000fed64000 flags: 0x0
[    3.087415] DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 9e2ff0505e
[    3.096746] DMAR: DRHD base: 0x000000fed65000 flags: 0x1
[    3.102694] DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
[    3.111552] DMAR: RMRR base: 0x000000777d7000 end: 0x000000777f6fff
[    3.118557] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[    3.125593] DMAR: No ATSR found
[    3.129261] DMAR: dmar1: Using Queued invalidation
[    3.134464] IOMMU passthrough mode = 1
[    3.138665] DMAR: Hardware identity mapping for device 0000:00:00.0
[    3.145654] DMAR: Hardware identity mapping for device 0000:00:0f.0
[    3.152672] DMAR: Hardware identity mapping for device 0000:00:12.0
[    3.159684] DMAR: Hardware identity mapping for device 0000:00:13.0
[    3.166692] DMAR: Hardware identity mapping for device 0000:00:13.2
[    3.173709] DMAR: Hardware identity mapping for device 0000:00:13.3
[    3.180721] DMAR: Hardware identity mapping for device 0000:00:14.0
[    3.187729] DMAR: Hardware identity mapping for device 0000:00:14.1
[    3.194748] DMAR: Hardware identity mapping for device 0000:00:15.0
[    3.201760] DMAR: Hardware identity mapping for device 0000:00:16.0
[    3.208766] DMAR: Hardware identity mapping for device 0000:00:18.0
[    3.215785] DMAR: Hardware identity mapping for device 0000:00:18.2
[    3.222799] DMAR: Hardware identity mapping for device 0000:00:1f.0
[    3.229807] DMAR: Hardware identity mapping for device 0000:00:1f.1
[    3.236828] DMAR: Hardware identity mapping for device 0000:01:00.0
[    3.243840] DMAR: Hardware identity mapping for device 0000:02:00.0
[    3.250849] DMAR: Hardware identity mapping for device 0000:03:00.0
[    3.257866] DMAR: Hardware identity mapping for device 0000:04:00.0
[    3.264880] DMAR: Hardware identity mapping for device 0000:05:00.0
[    3.271886] DMAR: Setting RMRR:
[    3.275393] DMAR: Ignoring identity map for HW passthrough device 0000:00:15.0 [0x777d7000 - 0x777f6fff]
[    3.286018] DMAR: Prepare 0-16MiB unity mapping for LPC
[    3.291863] DMAR: Ignoring identity map for HW passthrough device 0000:00:1f.0 [0x0 - 0xffffff]
[    3.301627] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    3.308877] iommu: Adding device 0000:00:00.0 to group 0
[    3.314771] iommu: Adding device 0000:00:0f.0 to group 1
[    3.320704] iommu: Adding device 0000:00:12.0 to group 2
[    3.326653] iommu: Adding device 0000:00:13.0 to group 3
[    3.332594] iommu: Adding device 0000:00:13.2 to group 4
[    3.338539] iommu: Adding device 0000:00:13.3 to group 5
[    3.344530] iommu: Adding device 0000:00:14.0 to group 6
[    3.350414] iommu: Adding device 0000:00:14.1 to group 7
[    3.356356] iommu: Adding device 0000:00:15.0 to group 8
[    3.362299] iommu: Adding device 0000:00:16.0 to group 9
[    3.368247] iommu: Adding device 0000:00:18.0 to group 10
[    3.374279] iommu: Adding device 0000:00:18.2 to group 10
[    3.380324] iommu: Adding device 0000:00:1f.0 to group 11
[    3.386355] iommu: Adding device 0000:00:1f.1 to group 11
[    3.392398] iommu: Adding device 0000:01:00.0 to group 12
[    3.398516] iommu: Adding device 0000:02:00.0 to group 13
[    3.404524] iommu: Adding device 0000:03:00.0 to group 14
[    3.410526] iommu: Adding device 0000:04:00.0 to group 15
[    3.416557] iommu: Adding device 0000:05:00.0 to group 16
[    3.425737] audit: initializing netlink subsys (disabled)
[    3.431639] audit: type=2000 audit(1557948474.149:1): initialized
[    3.438771] Initialise system trusted keyring
[    3.463727] VFS: Disk quotas dquot_6.6.0
[    3.468011] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.599727] Key type asymmetric registered
[    3.604169] Asymmetric key parser 'x509' registered
[    3.609667] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    3.617876] io scheduler noop registered
[    3.622255] io scheduler deadline registered
[    3.627095] io scheduler cfq registered (default)
[    3.633527] pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt
[    3.641161] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    3.648473] pcie_pme 0000:00:13.0:pcie01: service driver pcie_pme loaded
[    3.648516] pcieport 0000:00:13.2: Signaling PME through PCIe PME interrupt
[    3.656258] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    3.663560] pcie_pme 0000:00:13.2:pcie01: service driver pcie_pme loaded
[    3.663584] pcieport 0000:00:13.3: Signaling PME through PCIe PME interrupt
[    3.671352] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    3.678658] pcie_pme 0000:00:13.3:pcie01: service driver pcie_pme loaded
[    3.678681] pcieport 0000:00:14.0: Signaling PME through PCIe PME interrupt
[    3.686461] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    3.693755] pcie_pme 0000:00:14.0:pcie01: service driver pcie_pme loaded
[    3.693777] pcieport 0000:00:14.1: Signaling PME through PCIe PME interrupt
[    3.701544] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[    3.708850] pcie_pme 0000:00:14.1:pcie01: service driver pcie_pme loaded
[    4.030277] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    4.205662] Linux agpgart interface v0.103
[    4.239140] brd: module loaded
[    4.248849] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    4.257768] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    4.290246] dw-apb-uart.1: ttyS1 at MMIO 0xa1415000 (irq = 54, base_baud = 115200) is a 16550A
[    4.310913] console [ttyS0] disabled
[    4.314779] dw-apb-uart.2: ttyS0 at MMIO 0xa1417000 (irq = 6, base_baud = 115200) is a 16550A
[    4.324481] console [ttyS0] enabled
[    4.332090] bootconsole [earlyser0] disabled
[    4.341772] Loading iSCSI transport class v2.0-870.
[    4.349119] nvme nvme0: pci function 0000:04:00.0
[    4.354542] nvme 0000:04:00.0: enabling device (0000 -> 0002)
[    4.361049] nvme nvme1: pci function 0000:05:00.0
[    4.366450] ahci 0000:00:12.0: version 3.0
[    4.366649] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    4.375714] ahci 0000:00:12.0: flags: 64bit ncq sntf clo only pmp pio slum part deso sadm sds apst
[    4.386855] scsi host0: ahci
[    4.393498] scsi host1: ahci
[    4.396859] ata1 : SATA max UDMA/133 abar m2048@0xa1419000 port 0xa1419100 irq 343
[    4.405352] ata2 : SATA max UDMA/133 abar m2048@0xa1419000 port 0xa1419180 irq 343
[    4.414066] Change defer qc mode on external port for compatibility
[    4.421087] Change defer qc mode on external port for compatibility
[    4.428102] Change defer qc mode on external port for compatibility
[    4.435116] Change defer qc mode on external port for compatibility
[    4.452327] ahci 0000:01:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    4.461384] ahci 0000:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    4.470489] Cannot find slot node of this ata_port.
[    4.473445]  nvme1n1: p1
[    4.493497] scsi host2: ahci
[    4.499363] scsi host3: ahci
[    4.505651] scsi host4: ahci
[    4.510964] scsi host5: ahci
[    4.514350] ata3 : SATA max UDMA/133 abar m2048@0xa1300000 port 0xa1300100 irq 344
[    4.522832] ata4 : SATA max UDMA/133 abar m2048@0xa1300000 port 0xa1300180 irq 344
[    4.531297] ata5 : SATA max UDMA/133 abar m2048@0xa1300000 port 0xa1300200 irq 344
[    4.539772] ata6 : SATA max UDMA/133 abar m2048@0xa1300000 port 0xa1300280 irq 344
[    4.548346] Delay 11 seconds to wait for disk 1 ready.
[    4.548478] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    5.729177] i8042: No controller found
[    5.784722] mousedev: PS/2 mouse device common for all mice
[    5.803879] rtc-s35390a i2c-RTC35390:00: rtc core: registered rtc-s35390a as rtc0
[    5.812274] i2c /dev entries driver
[    5.820722] i801_smbus 0000:00:1f.1: SMBus using polling
[    5.832973] md: raid1 personality registered for level 1
[    5.839142] NET: Registered protocol family 17
[    5.844138] Key type dns_resolver registered
[    5.873179] mce: Using 7 MCE banks
[    5.877337] registered taskstats version 1
[    5.881932] Loading compiled-in untrusted X.509 certificates
[    5.888268] Loading compiled-in X.509 certificates
[    5.893659] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[    5.923589] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[    5.934911] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[    5.947862] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[    5.958872] page_owner is disabled
[    5.962717] AppArmor: AppArmor sha1 policy hashing enabled
[    5.969654] rtc-s35390a i2c-RTC35390:00: setting system clock to 2021-12-11 23:53:48 UTC (1639266828)
[    6.086053] ata3 : SATA link down (SStatus 0 SControl 300)
[    6.092207] ata3 : No present pin info for SATA link down event
[    7.414336] tsc: Refined TSC clocksource calibration: 1996.800 MHz
[    7.421267] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
[   18.563881] Delay 11 seconds to wait for disk 2 ready.
[   18.563889] clocksource: Switched to clocksource tsc
[   18.720698] ata1 (slot 3): softreset failed (device not ready)
[   18.727215] ata1 (slot 3): SRST fail, set srst fail flag
[   18.733156] ata2 (slot 4): softreset failed (device not ready)
[   18.739669] ata2 (slot 4): SRST fail, set srst fail flag
[   20.535373] ata2 (slot 4): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   20.543154] ata2 (slot 4): link reset sucessfully clear error flags
[   20.583364] ata1 (slot 3): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   20.591143] ata1 (slot 3): link reset sucessfully clear error flags
[   20.739512] ata2.00 (slot 4): ATA-10: TOSHIBA MG07ACA12TE, 0101, max UDMA/133
[   20.747487] ata2.00 (slot 4): 23437770752 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   20.756533] ata2.00 (slot 4): SN:        7060A041F96G
[   20.762184] ata1.00 (slot 3): ATA-10: TOSHIBA MG07ACA12TE, 0101, max UDMA/133
[   20.770156] ata1.00 (slot 3): 23437770752 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   20.779193] ata1.00 (slot 3): SN:        7050A0TZF96G
[   20.785851] ata2.00 (slot 4): configured for UDMA/133
[   20.791507] ata1.00 (slot 3): configured for UDMA/133
[   20.798278] scsi 0:0:0:0: Direct-Access     TOSHIBA  MG07ACA12TE              0101 PQ: 0 ANSI: 5
[   20.808269] got SATA disk[0]
[   20.811688] sd 0:0:0:0: [sata1] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB)
[   20.820644] sd 0:0:0:0: [sata1] 4096-byte physical blocks
[   20.826756] sd 0:0:0:0: [sata1] Write Protect is off
[   20.832320] sd 0:0:0:0: [sata1] Mode Sense: 00 3a 00 00
[   20.832327] scsi 1:0:0:0: Direct-Access     TOSHIBA  MG07ACA12TE              0101 PQ: 0 ANSI: 5
[   20.832364] sd 0:0:0:0: [sata1] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   20.852607] got SATA disk[1]
[   20.855962] sd 1:0:0:0: [sata2] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB)
[   20.864909] sd 1:0:0:0: [sata2] 4096-byte physical blocks
[   20.870434]  sata1: p1 p2 p3
[   20.870797] sd 0:0:0:0: [sata1] Attached SCSI disk
[   20.881608] sd 1:0:0:0: [sata2] Write Protect is off
[   20.887158] sd 1:0:0:0: [sata2] Mode Sense: 00 3a 00 00
[   20.887341] sd 1:0:0:0: [sata2] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   20.942850]  sata2: p1 p2 p3
[   20.946453] sd 1:0:0:0: [sata2] Attached SCSI disk
[   23.870771] ata4 (slot 1): link is slow to respond, please be patient (ready=0)
[   28.722899] ata4 (slot 1): softreset failed (device not ready)
[   28.729418] ata4 (slot 1): SRST fail, set srst fail flag
[   29.880701] ata6 : SATA link down (SStatus 0 SControl 300)
[   29.886833] ata6 : No present pin info for SATA link down event
[   31.696376] ata4 (slot 1): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   31.704160] ata4 (slot 1): link reset sucessfully clear error flags
[   31.853411] ata4.00 (slot 1): ATA-10: TOSHIBA MG07ACA12TE, 0101, max UDMA/133
[   31.861385] ata4.00 (slot 1): 23437770752 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   31.870424] ata4.00 (slot 1): SN:        7060A044F96G
[   31.877178] ata4.00 (slot 1): configured for UDMA/133
[   31.883942] scsi 3:0:0:0: Direct-Access     TOSHIBA  MG07ACA12TE              0101 PQ: 0 ANSI: 5
[   31.893931] got SATA disk[2]
[   31.897232] sd 3:0:0:0: [sata3] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB)
[   31.906185] sd 3:0:0:0: [sata3] 4096-byte physical blocks
[   31.912325] sd 3:0:0:0: [sata3] Write Protect is off
[   31.917873] sd 3:0:0:0: [sata3] Mode Sense: 00 3a 00 00
[   31.918313] sd 3:0:0:0: [sata3] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   31.965433]  sata3: p1 p2 p3
[   31.969006] sd 3:0:0:0: [sata3] Attached SCSI removable disk
[   37.929287] ata5 (slot 2): link is slow to respond, please be patient (ready=0)
[   42.730445] ata5 (slot 2): softreset failed (device not ready)
[   42.736967] ata5 (slot 2): SRST fail, set srst fail flag
[   45.753914] ata5 (slot 2): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   45.761699] ata5 (slot 2): link reset sucessfully clear error flags
[   45.878110] ata5.00 (slot 2): ATA-10: TOSHIBA MG07ACA12TE, 0101, max UDMA/133
[   45.886102] ata5.00 (slot 2): 23437770752 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   45.895140] ata5.00 (slot 2): SN:        7050A0U6F96G
[   45.901896] ata5.00 (slot 2): configured for UDMA/133
[   45.908690] scsi 4:0:0:0: Direct-Access     TOSHIBA  MG07ACA12TE              0101 PQ: 0 ANSI: 5
[   45.918700] got SATA disk[3]
[   45.922030] sd 4:0:0:0: [sata4] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB)
[   45.930982] sd 4:0:0:0: [sata4] 4096-byte physical blocks
[   45.937128] sd 4:0:0:0: [sata4] Write Protect is off
[   45.942684] sd 4:0:0:0: [sata4] Mode Sense: 00 3a 00 00
[   45.942725] sd 4:0:0:0: [sata4] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   45.990179]  sata4: p1 p2 p3
[   45.993771] sd 4:0:0:0: [sata4] Attached SCSI removable disk
[   46.002832] Freeing unused kernel memory: 976K
[   46.007804] Write protecting the kernel read-only data: 8192k
[   46.014497] Freeing unused kernel memory: 576K
[   46.020223] Freeing unused kernel memory: 268K
[   46.084767] ACPI: bus type USB registered
[   46.089288] usbcore: registered new interface driver usbfs
[   46.095442] usbcore: registered new interface driver hub
[   46.101410] usbcore: registered new interface driver ethub
[   46.107557] usbcore: registered new device driver usb
[   46.132472] xhci_hcd 0000:00:15.0: xHCI Host Controller
[   46.139424] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[   46.348838] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009010
[   46.358274] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[   46.358655] hub 1-0:1.0: USB hub found
[   46.362888] hub 1-0:1.0: 9 ports detected
[   46.367432]  port1 is going to power up Vbus by GPIO#29(ACTIVE_HIGH)
[   46.474576] host 0000:00:15.0 port 1 has Vbus GPIO#29 with polarity ACTIVE_HIGH
[   46.482983]  port2 is going to power up Vbus by GPIO#30(ACTIVE_HIGH)
[   46.590093] host 0000:00:15.0 port 2 has Vbus GPIO#30 with polarity ACTIVE_HIGH
[   46.599519] xhci_hcd 0000:00:15.0: xHCI Host Controller
[   46.605384] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[   46.613701] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   46.623005] hub 2-0:1.0: USB hub found
[   46.627221] hub 2-0:1.0: 7 ports detected
[   46.631751] host 0000:00:15.0 port 1 has Vbus GPIO#29 with polarity ACTIVE_HIGH
[   46.640172] host 0000:00:15.0 port 2 has Vbus GPIO#30 with polarity ACTIVE_HIGH
[   46.663703] geminilake_synobios: loading out-of-tree module taints kernel.
[   46.672934] geminilake_synobios: module license 'Synology Inc.' taints kernel.
[   46.681004] Disabling lock debugging due to kernel taint
[   46.697834] synobios open /dev/ttyS1 success
[   46.712904] correction with 0x00
[   46.717537] 2021-12-11 23:54:29 UTC
[   46.721423] synobios: load, major number 201
[   46.726192] Brand: Synology
[   46.729310] Model: DS-920+
[   46.732331] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   46.741767] synobios cpu_arch proc entry initialized
[   46.747309] synobios crypto_hw proc entry initialized
[   46.752950] synobios syno_platform proc entry initialized
[   46.763723] Module [geminilake_synobios] is removed.
[   46.769490] synobios: unload
[   46.921683] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[   47.185713] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[   47.695535] usb 1-2: new full-speed USB device number 3 using xhci_hcd
[   47.837816] usb 1-2: ep 0x81 - rounding interval to 512 microframes, ep desc says 800 microframes
[   51.821591] random: nonblocking pool is initialized
[   51.910130] md: md0 stopped.
[   51.916958] md: bind<sata2p1>
[   51.920527] md: bind<sata3p1>
[   51.924069] md: bind<sata4p1>
[   51.927589] md: bind<sata1p1>
[   51.931183] md/raid1:md0: active with 4 out of 4 mirrors
[   51.973859] md0: detected capacity change from 0 to 2549940224
[   53.403544] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   53.453607] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[   58.951498] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   59.009498] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[   59.378173] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   59.464560] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[   59.858799] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[   59.879111] systemd[1]: Detected architecture x86-64.
[   59.891802] systemd[1]: Set hostname to <daemonx>.
[   61.811461] systemd[1]: Cannot add dependency job for unit pkg-install-low-priority-builtin.service, ignoring: Unit pkg-install-low-priority-builtin.service failed to load: No such file or directory.
[   61.831329] systemd[1]: Cannot add dependency job for unit pkg-install-high-priority-builtin.service, ignoring: Unit pkg-install-high-priority-builtin.service failed to load: No such file or directory.
[   61.852841] systemd[1]: Reached target Paths.
[   61.861694] systemd[1]: Starting Paths.
[   61.866010] systemd[1]: Reached target Swap.
[   61.874666] systemd[1]: Starting Swap.
[   61.878879] systemd[1]: Reached target Timers.
[   61.887925] systemd[1]: Starting Timers.
[   61.892616] systemd[1]: Created slice Root Slice.
[   61.902247] systemd[1]: Starting Root Slice.
[   61.907146] systemd[1]: Created slice ReplicationService's slice.
[   61.919886] systemd[1]: Starting ReplicationService's slice.
[   61.926314] systemd[1]: Listening on Journal Audit Socket.
[   61.937692] systemd[1]: Starting Journal Audit Socket.
[   61.943540] systemd[1]: Created slice User and Session Slice.
[   61.955497] systemd[1]: Starting User and Session Slice.
[   61.961546] systemd[1]: Created slice Synology DSM internal service.
[   61.974854] systemd[1]: Starting Synology DSM internal service.
[   61.981577] systemd[1]: Created slice OAuthService's slice.
[   61.993146] systemd[1]: Starting OAuthService's slice.
[   61.999002] systemd[1]: Created slice SynoFinder's slice.
[   62.010187] systemd[1]: Starting SynoFinder's slice.
[   62.015792] systemd[1]: Listening on udev Control Socket.
[   62.026975] systemd[1]: Starting udev Control Socket.
[   62.032739] systemd[1]: Created slice dsm6-ui-compatible's slice.
[   62.045474] systemd[1]: Starting dsm6-ui-compatible's slice.
[   62.051903] systemd[1]: Created slice Apple Filing Protocol Daemon.
[   62.065031] systemd[1]: Starting Apple Filing Protocol Daemon.
[   62.071653] systemd[1]: Created slice Package Center Slice.
[   62.083214] systemd[1]: Starting Package Center Slice.
[   62.089059] systemd[1]: Created slice BTRFS Space Reclaim.
[   62.100433] systemd[1]: Starting BTRFS Space Reclaim.
[   62.106184] systemd[1]: Created slice Synology DSM Storage Service.
[   62.119310] systemd[1]: Starting Synology DSM Storage Service.
[   62.125952] systemd[1]: Created slice System Slice.
[   62.135979] systemd[1]: Starting System Slice.
[   62.141096] systemd[1]: Created slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice.
[   62.156642] systemd[1]: Starting system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice.
[   62.167740] systemd[1]: Reached target Slices.
[   62.176786] systemd[1]: Starting Slices.
[   62.181301] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   62.194423] systemd[1]: Starting system-serial\x2dgetty.slice.
[   62.201047] systemd[1]: Created slice synobackup daemon slice.
[   62.213202] systemd[1]: Starting synobackup daemon slice.
[   62.219336] systemd[1]: Created slice ScsiTarget's slice.
[   62.230516] systemd[1]: Starting ScsiTarget's slice.
[   62.236168] systemd[1]: Created slice ActiveInsight's slice.
[   62.247929] systemd[1]: Starting ActiveInsight's slice.
[   62.253871] systemd[1]: Created slice r8152's slice.
[   62.264074] systemd[1]: Starting r8152's slice.
[   62.269238] systemd[1]: Created slice RAID Resync Process. Including Resync, Repair and Reshape..
[   62.285371] systemd[1]: Starting RAID Resync Process. Including Resync, Repair and Reshape..
[   62.297420] systemd[1]: Created slice SecureSignIn's slice.
[   62.308990] systemd[1]: Starting SecureSignIn's slice.
[   62.314804] systemd[1]: Listening on Journal Socket.
[   62.325029] systemd[1]: Starting Journal Socket.
[   62.334930] systemd[1]: Mounting Temporary Directory...
[   62.341388] systemd[1]: Starting Set boot sequence config...
[   62.351751] systemd[1]: Starting Journal Socket (/dev/log).
[   62.362827] systemd[1]: Mounting Debug File System...
[   62.369200] systemd[1]: Starting check integrity of rd.gz decompression...
[   62.380699] systemd[1]: Starting Set hostname...
[   62.391905] systemd[1]: Starting Synology Task Scheduler Init...
[   62.402051] systemd[1]: Starting Synology swap...
[   62.412319] systemd[1]: Started Machine Check Exception Logging Daemon.
[   62.422668] systemd[1]: Starting Machine Check Exception Logging Daemon...
[   62.437170] systemd[1]: Starting Disabling fan checking flag ......
[   62.450489] systemd[1]: Starting Load ntb_brd module...
[   62.461618] systemd[1]: Starting Link coredump path to volume if possible...
[   62.473534] systemd[1]: Starting Set time zone information to kernel...
[   62.491666] systemd[1]: Starting Load Kernel Modules...
[   62.498587] systemd[1]: Starting unbind USB device...
[   62.507882] systemd[1]: Created slice Synology DSM desktop service.
[   62.518637] systemd[1]: Starting Synology DSM desktop service.
[   62.531369] systemd[1]: Created slice SNMP.
[   62.539839] systemd[1]: Starting SNMP.
[   62.544141] systemd[1]: Created slice scemd.
[   62.552800] systemd[1]: Starting scemd.
[   62.557199] systemd[1]: Created slice Python2's slice.
[   62.567807] systemd[1]: Starting Python2's slice.
[   62.573184] systemd[1]: Created slice Synology Flashcache.
[   62.582391] Monitor-Mwait will be used to enter C-1 state
[   62.582406] Monitor-Mwait will be used to enter C-2 state
[   62.582419] Monitor-Mwait will be used to enter C-3 state
[   62.582439] ACPI: acpi_idle registered with cpuidle
[   62.584612] systemd[1]: Starting Synology Flashcache.
[   62.590396] systemd[1]: Created slice FileStation's slice.
[   62.596548] systemd[1]: Starting FileStation's slice.
[   62.602317] systemd[1]: Created slice Performance alarm.
[   62.613401] systemd[1]: Starting Performance alarm.
[   62.618965] systemd[1]: Created slice BTRFS Optimization.
[   62.629994] systemd[1]: Starting BTRFS Optimization.
[   62.640820] systemd[1]: Created slice Synology Swap Works.
[   62.646960] systemd[1]: Starting Synology Swap Works.
[   62.657968] systemd[1]: Created slice Synology Index slice (WAT).
[   62.664783] systemd[1]: Starting Synology Index slice (WAT).
[   62.677135] systemd[1]: Created slice Shared Folder Sync.
[   62.683180] systemd[1]: Starting Shared Folder Sync.
[   62.688881] systemd[1]: Created slice Virtualization's slice.
[   62.700351] systemd[1]: Starting Virtualization's slice.
[   62.711989] systemd[1]: Created slice DhcpServer's slice.
[   62.718043] systemd[1]: Starting DhcpServer's slice.
[   62.723761] systemd[1]: Created slice OpenBSD Secure Shell server.
[   62.735034] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[   62.745106] systemd[1]: Starting OpenBSD Secure Shell server.
[   62.747746] flashcache: flashcache-1.0-2021-10-18-20:18 initialized
[   62.756074] flashcache_syno: flashcache-1.0-syno-v25-pin-file-2021-10-18-20:18-debug initialized
[   62.774566] systemd[1]: Created slice HybridShare's slice.
[   62.785950] systemd[1]: Starting HybridShare's slice.
[   62.789657] NET: Registered protocol family 10
[   62.796674] systemd[1]: Listening on udev Kernel Socket.
[   62.798722] sit: IPv6 over IPv4 tunneling driver
[   62.807791] systemd[1]: Starting udev Kernel Socket.
[   62.818543] systemd[1]: Created slice synocli-file's slice.
[   62.830149] systemd[1]: Starting synocli-file's slice.
[   62.836077] systemd[1]: Created slice Task Scheduler Group.
[   62.842318] systemd[1]: Starting Task Scheduler Group.
[   62.848220] systemd[1]: Created slice Synology Cache Advisor.
[   62.859859] systemd[1]: Starting Synology Cache Advisor.
[   62.865952] systemd[1]: Created slice SMBService's slice.
[   62.877382] systemd[1]: Starting SMBService's slice.
[   62.883061] systemd[1]: Created slice RadiusServer's slice.
[   62.884204] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   62.884258] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   62.884309] sd 3:0:0:0: Attached scsi generic sg2 type 0
[   62.884373] sd 4:0:0:0: Attached scsi generic sg3 type 0
[   62.918053] systemd[1]: Starting RadiusServer's slice.
[   62.929901] systemd[1]: Mounted Debug File System.
[   62.935316] systemd[1]: Mounted Temporary Directory.
[   62.941488] md: md1 stopped.
[   62.948903] systemd[1]: Started Set boot sequence config.
[   62.951065] md: bind<sata2p2>
[   62.951325] md: bind<sata3p2>
[   62.951575] md: bind<sata4p2>
[   62.951758] md: bind<sata1p2>
[   62.972620] systemd[1]: Listening on Journal Socket (/dev/log).
[   62.975015] md/raid1:md1: active with 4 out of 4 mirrors
[   62.975666] r8168 Gigabit Ethernet driver 8.045.12-NAPI loaded
[   62.975679] r8168 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   62.981780]  Reinit 1 8001
[   62.981793]  Reinit 2 1
[   62.991478]  Reinit 1 8001
[   62.991492]  Reinit 2 1
[   62.992076] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[   62.992082] r8168  Copyright (C) 2017  Realtek NIC software team <nicfae@realtek.com>
                This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
                This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[   62.992093] r8168 Gigabit Ethernet driver 8.045.12-NAPI loaded
[   62.992101] r8168 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[   62.998128]  Reinit 1 8001
[   62.998141]  Reinit 2 1
[   63.007826]  Reinit 1 8001
[   63.007839]  Reinit 2 1
[   63.008367] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[   63.008369] r8168  Copyright (C) 2017  Realtek NIC software team <nicfae@realtek.com>
                This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
                This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[   63.012784] md1: detected capacity change from 0 to 2147418112
[   63.034614] usb-storage 1-4:1.0: USB Mass Storage device detected
[   63.034749] scsi host6: usb-storage 1-4:1.0
[   63.034851] usbcore: registered new interface driver usb-storage
[   63.036559] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   63.043140] ehci-pci: EHCI PCI platform driver
[   63.044392] uhci_hcd: USB Universal Host Controller Interface driver
[   63.188318] systemd[1]: Started check integrity of rd.gz decompression.
[   63.200033] [drm] GuC: No firmware known for this platform!
[   63.200035] [drm] HuC: No firmware known for this platform!
[   63.208728] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   63.208728] [drm] Driver supports precise vblank timestamp query.
[   63.208895] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   63.212140] [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
[   63.248068] systemd[1]: Started Set hostname.
[   63.253199] systemd[1]: Started Synology Task Scheduler Init.
[   63.263608] systemd[1]: Started Disabling fan checking flag ....
[   63.275861] systemd[1]: Started Load ntb_brd module.
[   63.287364] systemd[1]: Started Link coredump path to volume if possible.
[   63.299510] systemd[1]: Started Set time zone information to kernel.
[   63.312829] systemd[1]: Started unbind USB device.
[   63.324305] systemd[1]: Reached target Sockets.
[   63.334227] systemd[1]: Starting Sockets.
[   63.345841] systemd[1]: Starting Journal Service...
[   63.351361] systemd[1]: Reached target Local File Systems.
[   63.361287] systemd[1]: Starting Local File Systems.
[   63.372576] systemd[1]: Starting Set boot sequence config for temporary use...
[   63.381236] systemd[1]: Starting D-Bus Session Message Bus...
[   63.394033] systemd[1]: Starting udev Coldplug all Devices...
[   63.405267] systemd[1]: Starting Open vSwitch database server...
[   63.416699] systemd[1]: Starting D-Bus System Message Bus...
[   63.428218] systemd[1]: Starting Mount usb fs...
[   63.439801] systemd[1]: Started Set boot sequence config for temporary use.
[   63.459463] systemd[1]: Started Journal Service.
[   63.465412] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   63.503878] systemd-journald[5610]: Received request to flush runtime journal from PID 1
[   63.510528] gre: GRE over IPv4 demultiplexor driver
[   63.520258] openvswitch: Open vSwitch switching datapath
[   63.601211] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k
[   64.032574] scsi 6:0:0:0: Direct-Access     Synology DiskStation              DL17 PQ: 0 ANSI: 6
[   64.042694] sd 6:0:0:0: Attached scsi generic sg4 type 0
[   64.048713] sd 6:0:0:0: [synoboot] 245760 512-byte logical blocks: (126 MB/120 MiB)
[   64.058093] sd 6:0:0:0: [synoboot] Write Protect is off
[   64.063934] sd 6:0:0:0: [synoboot] Mode Sense: 23 00 00 00
[   64.064739] sd 6:0:0:0: [synoboot] No Caching mode page found
[   64.071158] sd 6:0:0:0: [synoboot] Assuming drive cache: write through
[   64.084417] GPT:Primary header thinks Alt. header is not at the end of the disk.
[   64.092682] GPT:239649 != 245759
[   64.096287] GPT:Alternate GPT header not at the end of the disk.
[   64.102998] GPT:239649 != 245759
[   64.106601] GPT: Use GNU Parted to correct GPT errors.
[   64.112348]  synoboot: synoboot1 synoboot2
[   64.119374] sd 6:0:0:0: [synoboot] Attached SCSI disk
[   64.288824] [drm] failed to retrieve link info, disabling eDP
[   64.302082] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[   64.311038] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   64.319347] acpi device:50: registered as cooling_device4
[   64.325459] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input0
[   64.335761] evbug: Connected device: input0 (Video Bus at LNXVIDEO/video/input0)
[   64.337075] [drm] Cannot find any crtc or sizes
[   64.343147] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   64.384763] usbcore: registered new interface driver usblp
[   64.398383] r8168 0000:03:00.0 eth5: renamed from eth1
[   64.405729] usbcore: registered new interface driver usbhid
[   64.417721] usbhid: USB HID core driver
[   64.425779] r8168 0000:02:00.0 eth1: renamed from eth0
[   64.437746] r8168 0000:03:00.0 eth0: renamed from eth5
[   64.456687] synobios open /dev/ttyS1 success
[   64.473800] correction with 0x00
[   64.480296] 2021-12-11 23:54:47 UTC
[   64.489318] synobios: load, major number 201
[   64.494088] Brand: Synology
[   64.497209] Model: DS-920+
[   64.500233] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   64.509679] synobios cpu_arch proc entry initialized
[   64.519592] synobios crypto_hw proc entry initialized
[   64.525235] synobios syno_platform proc entry initialized
[   64.544225] Syno_HddMon: Initialization completed.
[   64.617722] SSE version of gcm_enc/dec engaged.
[   64.977659] nvme nvme0: controller is down; will reset: CSTS=0xffffffff, PCI_STATUS=0x10
[   64.986898] nvme 0000:04:00.0: enabling device (0000 -> 0002)
[   67.658282] device ovs-system entered promiscuous mode
[   67.664043] audit: type=1700 audit(1639266890.184:2): dev=ovs-system prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[   67.680593] device ovs_eth0 entered promiscuous mode
[   67.687859] audit: type=1700 audit(1639266890.208:3): dev=ovs_eth0 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[   67.729189] eth0: 0xffffc9000008c000, 00:11:32:d5:0b:97, IRQ 353
[   67.744171]  Reinit 1 8001
[   67.747763]  Reinit 2 1
[   67.760290]  Reinit 1 8001
[   67.763416]  Reinit 2 1
[   67.776453]  Reinit 1 8001
[   67.779582]  Reinit 2 1
[   67.809995] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   67.822167] device eth0 entered promiscuous mode
[   67.822179] audit: type=1700 audit(1639266890.342:4): dev=eth0 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[   67.855321] IPv6: ADDRCONF(NETDEV_UP): ovs_eth0: link is not ready
[   67.917099] device ovs_eth1 entered promiscuous mode
[   67.926762] audit: type=1700 audit(1639266890.446:5): dev=ovs_eth1 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[   67.975950] eth1: 0xffffc90000088000, 00:11:32:d5:0b:98, IRQ 352
[   67.989479]  Reinit 1 8001
[   67.993068]  Reinit 2 1
[   68.011801]  Reinit 1 8001
[   68.017650]  Reinit 2 1
[   68.036893]  Reinit 1 8001
[   68.042233]  Reinit 2 1
[   68.077689] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   68.092178] device eth1 entered promiscuous mode
[   68.102039] audit: type=1700 audit(1639266890.622:6): dev=eth1 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[   68.128988] IPv6: ADDRCONF(NETDEV_UP): ovs_eth1: link is not ready
[   71.702811] md: md3 stopped.
[   71.706611] md: bind<nvme1n1p1>
[   71.711113] md/raid1:md3: active with 1 out of 2 mirrors
[   71.718960] md3: detected capacity change from 0 to 256050855936
[   71.823543]  Reinit 1 8001
[   71.826670]  Reinit 2 1
[   71.836700] r8168: eth0: link up 1 Gbps
[   71.872589] md: md2 stopped.
[   71.918631] md: bind<sata4p3>
[   71.938634] md: bind<sata1p3>
[   71.949701] md: bind<sata2p3>
[   71.953824] md: bind<sata3p3>
[   71.996139] raid6: sse2x1   gen()  4507 MB/s
[   72.017134] raid6: sse2x1   xor()  3005 MB/s
[   72.038134] raid6: sse2x2   gen()  5527 MB/s
[   72.059128] raid6: sse2x2   xor()  3458 MB/s
[   72.080123] raid6: sse2x4   gen()  6066 MB/s
[   72.089784]  Reinit 1 8001
[   72.092911]  Reinit 2 1
[   72.101124] raid6: sse2x4   xor()  2607 MB/s
[   72.102937] r8168: eth1: link up 1 Gbps
[   72.103892] IPv6: ADDRCONF(NETDEV_CHANGE): ovs_eth1: link becomes ready
[   72.117586] raid6: using algorithm sse2x4 gen() 6066 MB/s
[   72.123627] raid6: .... xor() 2607 MB/s, rmw enabled
[   72.129189] raid6: using ssse3x2 recovery algorithm
[   72.152141] async_tx: api initialized (async)
[   72.161329] xor: measuring software checksum speed
[   72.176103]    prefetch64-sse:  7404.000 MB/sec
[   72.191102]    generic_sse:  6596.000 MB/sec
[   72.195906] xor: using function: prefetch64-sse (7404.000 MB/sec)
[   72.258047] md: raid6 personality registered for level 6
[   72.264022] md: raid5 personality registered for level 5
[   72.270001] md: raid4 personality registered for level 4
[   72.275958] md: raidF1 personality registered for level 45
[   72.282562] md/raid:md2: device sata3p3 operational as raid disk 0
[   72.289509] md/raid:md2: device sata2p3 operational as raid disk 3
[   72.296443] md/raid:md2: device sata1p3 operational as raid disk 2
[   72.303496] md/raid:md2: device sata4p3 operational as raid disk 1
[   72.311020] md/raid:md2: allocated 4386kB
[   72.315679] md/raid:md2: raid level 5 active with 4 out of 4 devices, algorithm 2
[   72.324546] RAID conf printout:
[   72.324549]  --- level:5 rd:4 wd:4
[   72.324552]  disk 0, o:1, dev:sata3p3
[   72.324554]  disk 1, o:1, dev:sata4p3
[   72.324556]  disk 2, o:1, dev:sata1p3
[   72.324558]  disk 3, o:1, dev:sata2p3
[   72.408432] md2: detected capacity change from 0 to 35985602641920
[   75.767805] flashcache_syno: Preread max memmory count=2048
[   75.774038] flashcache_syno: Total pre-allocate bytes=67469312
[   75.780558] flashcache_syno: Check and init Jobs finish
[   75.786439] flashcache_syno: /dev/md2 exclude check success
[   75.792683] flashcache_syno: /dev/md3 exclude check success
[   75.812607] device-mapper: flashcache: Fast (clean) Shutdown Detected
[   75.819811] Both CLEAN and DIRTY blocks exist in cache
[   75.825358] flashcache_syno: Hash mapping = enable
[   75.830910] flashcache_syno: flashcache_writeback_load: md_blocks = 15230, md_sectors = 121840, md_block_size = 8

[   75.844031] device-mapper: flashcache: Allocate 95175KB (25B per) mem for 3898368-entry cache(capacity:243707MB, associativity:512, block size:128 sectors(64KB))
[   76.107725] device-mapper: flashcache: flashcache_writeback_load: Cache metadata loaded from disk with 390137 valid 3136 DIRTY blocks
[   76.259920] flashcache_syno: Create finish
[   76.290815] flashcache_syno: Quick Flush
[   78.405369] Flashcache: Cleaning 2136 Dirty blocks, Dirty Blocks pct 0%
[   78.412581]
[   80.282681] Btrfs loaded, crc32c=crc32c-intel
[   80.288030] BTRFS: device label 2020.11.22-06:50:45 v25426 devid 1 transid 3036664 /dev/mapper/cachedev_0
[   80.299268] BTRFS info (device dm-0): enabling auto syno reclaim space
[   80.306573] BTRFS info (device dm-0): use ssd allocation scheme
[   80.313239] BTRFS info (device dm-0): using free space tree
[   80.319476] BTRFS info (device dm-0): has skinny extents
[   87.006331] loop: module loaded
[   87.062021] Synotify use 16384 event queue size
[   87.069557] Synotify use 16384 event queue size
[   88.309681] ata1.00 (slot 3): configured for UDMA/133
[   88.315356] ata1 (slot 3): EH complete
[   88.478139] ata2.00 (slot 4): configured for UDMA/133
[   88.483828] ata2 (slot 4): EH complete
[   88.628456] ata4.00 (slot 1): configured for UDMA/133
[   88.634107] ata4 (slot 1): EH complete
[   88.808259] ata5.00 (slot 2): configured for UDMA/133
[   88.813912] ata5 (slot 2): EH complete
[   89.255223] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use)
[   92.388003] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(001132d50b98).
[   92.418035] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized
[   92.453339] iSCSI:target_core_device.c:613:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
[   92.466587] iSCSI:target_core_configfs.c:5446:target_init_dbroot db_root: cannot open: /etc/target
[   92.476702] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
[   92.553051] iSCSI:target_core_file.c:149:fd_attach_hba RODSP plugin for fileio is enabled.
[   92.562298] iSCSI:target_core_file.c:156:fd_attach_hba ODX Token Manager is enabled.
[   92.570990] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled.
[   92.581030] iSCSI:target_core_ep.c:795:ep_attach_hba RODSP plugin for epio is enabled.
[   92.589880] iSCSI:target_core_ep.c:802:ep_attach_hba ODX Token Manager is enabled.
[   92.767889] workqueue: max_active 1024 requested for vhost_scsi is out of range, clamping between 1 and 512
[  125.954734] nvme nvme0: I/O 0 QID 0 timeout, disable controller
[  125.961720] nvme nvme0: Identify Controller failed (7)
[  125.967466] nvme nvme0: Removing after probe failure status: -5
[  125.974266] block (null): nvme_revalidate_disk: Identify failure
[  158.554404] ext2: synoboot2 mounted, process=synopkicompatsy
[  158.604279] synoboot2 unmounted, process=synopkicompatsy
[  158.843300] ext2: synoboot1 mounted, process=syno_bios_log_c
[  158.868537] 8021q: 802.1Q VLAN Support v1.8
[  159.005710] vfat: synoboot1 mounted, process=syno_bios_log_c
[  159.076642] synoboot1 unmounted, process=syno_bios_log_c
[  159.721295] r8152: module verification failed: signature and/or required key missing - tainting kernel
[  159.732509] usbcore: registered new interface driver r8152
[  159.865650] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  163.686822] fuse init (API version 7.23)
[  170.478049] netif_napi_add() called with weight 256 on device eth%d
[  170.485298] r8152 2-1:1.0 eth2: v2.15.0 (2021/04/15)
[  170.490861] r8152 2-1:1.0 eth2: This product is covered by one or more of the following patents:
                        US6,570,884, US6,115,776, and US6,327,625.

[  170.508259] r8152 2-1:1.0 eth2: chip rev 14
[  174.761959] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[  174.977657] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[  174.985178] r8152 2-1:1.0 eth2: carrier on
[  181.316280] tun: Universal TUN/TAP device driver, 1.6
[  181.321929] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[  181.346357] VFIO - User Level meta-driver version: 0.3
[  182.227851] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[  182.257518] device virbr0-nic entered promiscuous mode
[  182.263297] audit: type=1700 audit(1639267004.804:7): dev=virbr0-nic prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[  182.302307] device virbr0-nic left promiscuous mode
[  182.307790] audit: type=1700 audit(1639267004.848:8): dev=virbr0-nic prom=0 old_prom=256 auid=4294967295 uid=0 gid=0 ses=4294967295
[  182.321021] virbr0: port 1(virbr0-nic) entered disabled state
[  184.825551] systemd[1]: PID file /var/run/ddnsd.pid not readable (yet?) after start.
[  185.407252] systemd[1]: PID file /var/run/ddnsd.pid not readable (yet?) after start.
[  191.221660] IPv6: ADDRCONF(NETDEV_UP): tap02113227b205: link is not ready
[  191.258255] iSCSI:target_core_configfs.c:5393:volume_make_item load filesystem_stat on volume(volume1)
[  191.270577] iSCSI:target_core_file.c:603:fd_init_rod Load FD-ROD Buffer(/volume1/@iSCSI/LUN/VDISK_BLUN/8bee7466-3a0d-499b-a511-9a820b51e6b0/ROD)
[  191.285258] iSCSI:target_core_rodsp_server.c:156:rodsp_server_sink_register SINK-REG(8bee7466-3a0d-499b-a511-9a820b51e6b0)
[  191.297744] iSCSI:target_core_configfs.c:2791:target_dev_enable_store process [18170] '/var/packages/Virtualization/target/bin/synocccd' successfully loaded LUN(fileio/LUN_8bee7466-3a0d-499b-a511-9a820b51e6b0), uuid(8bee7466-3a0d-499b-a511-9a820b51e6b0), control(fd_dev_name=/volume1/@iSCSI/LUN/VDISK_BLUN/8bee7466-3a0d-499b-a511-9a820b51e6b0/vdisk.df4af389-9db1-46e9-b832-6f496c562dfe.a34ee9bd-5469-4657-b01a-425b7d9980dc.2.0_00000,fd_dev_size=107374182400,thin_provision=1,block_size=512,enable_sink=8bee7466-3a0d-499b-a511-9a820b51e6b0,fd_async_io=1,fd_rod_path=/volume1/@iSCSI/LUN/VDISK_BLUN/8bee7466-3a0d-499b-a511-9a820b51e6b0/ROD)
[  191.361076] iSCSI:target_core_configfs.c:1105:emulate_fua_write_store [fileio/vdisk.df4af389-9db1-46e9-b832-6f496c562dfe.a34ee9bd-5469-4657-b01a-425b7d9980dc.2.0/8bee7466-3a0d-499b-a511-9a820b51e6b0] exec_fua_write: 1
[  191.383769] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: 169.254.174.40:3260 on iSCSI/TCP
[  191.396132] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: 192.168.1.127:3260 on iSCSI/TCP
[  191.408389] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: 192.168.1.128:3260 on iSCSI/TCP
[  191.420623] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: [fe80::211:32ff:fed5:b98]:3260 on iSCSI/TCP
[  191.434062] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: [fe80::2e0:4cff:fe85:4cfe]:3260 on iSCSI/TCP
[  191.515466] iSCSI:target_core_file.c:603:fd_init_rod Load FD-ROD Buffer(/volume1/@iSCSI/LUN/VDISK_BLUN/2612b5c4-0958-4f01-86cd-8c6ca8a7bfa9/ROD)
[  191.530085] iSCSI:target_core_rodsp_server.c:156:rodsp_server_sink_register SINK-REG(2612b5c4-0958-4f01-86cd-8c6ca8a7bfa9)
[  191.542502] iSCSI:target_core_configfs.c:2791:target_dev_enable_store process [18170] '/var/packages/Virtualization/target/bin/synocccd' successfully loaded LUN(fileio/LUN_2612b5c4-0958-4f01-86cd-8c6ca8a7bfa9), uuid(2612b5c4-0958-4f01-86cd-8c6ca8a7bfa9), control(fd_dev_name=/volume1/@iSCSI/LUN/VDISK_BLUN/2612b5c4-0958-4f01-86cd-8c6ca8a7bfa9/vdisk.df4af389-9db1-46e9-b832-6f496c562dfe.956c5d39-9f59-41e3-b647-9a24b9ea8311.2.1_00000,fd_dev_size=1073741824,thin_provision=1,block_size=512,enable_sink=2612b5c4-0958-4f01-86cd-8c6ca8a7bfa9,fd_async_io=1,fd_rod_path=/volume1/@iSCSI/LUN/VDISK_BLUN/2612b5c4-0958-4f01-86cd-8c6ca8a7bfa9/ROD)
[  191.631951] iSCSI:target_core_configfs.c:1105:emulate_fua_write_store [fileio/vdisk.df4af389-9db1-46e9-b832-6f496c562dfe.956c5d39-9f59-41e3-b647-9a24b9ea8311.2.1/2612b5c4-0958-4f01-86cd-8c6ca8a7bfa9] exec_fua_write: 1
[  191.679011] scsi host7: TCM_Loopback
[  191.683482] scsi 7:0:1:0: Direct-Access     SYNOLOGY iSCSI Storage            4.0  PQ: 0 ANSI: 5
[  191.693551] got iSCSI disk[0]
[  191.697041] sd 7:0:1:0: [iscsi1] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB)
[  191.697147] sd 7:0:1:0: Attached scsi generic sg5 type 0
[  191.711983] sd 7:0:1:0: [iscsi1] Write Protect is off
[  191.717633] sd 7:0:1:0: [iscsi1] Mode Sense: 43 00 10 08
[  191.717728] sd 7:0:1:0: [iscsi1] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  191.728754] sd 7:0:1:0: [iscsi1] Attached SCSI disk
[  192.330123] EXT4-fs (iscsi1): mounted filesystem with ordered data mode. Opts: (null)
[  192.499139] IPv6: ADDRCONF(NETDEV_CHANGE): tap02113227b205: link becomes ready
[  197.237768] IPv6: ADDRCONF(NETDEV_UP): tap02113226d198: link is not ready
[  197.325712] iSCSI:target_core_file.c:603:fd_init_rod Load FD-ROD Buffer(/volume1/@iSCSI/LUN/VDISK_BLUN/9f5cf110-764d-4853-b601-c70e82c7bd7c/ROD)
[  197.340326] iSCSI:target_core_rodsp_server.c:156:rodsp_server_sink_register SINK-REG(9f5cf110-764d-4853-b601-c70e82c7bd7c)
[  197.352736] iSCSI:target_core_configfs.c:2791:target_dev_enable_store process [18170] '/var/packages/Virtualization/target/bin/synocccd' successfully loaded LUN(fileio/LUN_9f5cf110-764d-4853-b601-c70e82c7bd7c), uuid(9f5cf110-764d-4853-b601-c70e82c7bd7c), control(fd_dev_name=/volume1/@iSCSI/LUN/VDISK_BLUN/9f5cf110-764d-4853-b601-c70e82c7bd7c/vdisk.b260f66d-b39f-4583-af65-1f6320558c29.f5f7a13f-c4f7-44da-ad22-400958142982.2.0_00000,fd_dev_size=107374182400,thin_provision=1,block_size=512,enable_sink=9f5cf110-764d-4853-b601-c70e82c7bd7c,fd_async_io=1,fd_rod_path=/volume1/@iSCSI/LUN/VDISK_BLUN/9f5cf110-764d-4853-b601-c70e82c7bd7c/ROD)
[  197.415984] iSCSI:target_core_configfs.c:1105:emulate_fua_write_store [fileio/vdisk.b260f66d-b39f-4583-af65-1f6320558c29.f5f7a13f-c4f7-44da-ad22-400958142982.2.0/9f5cf110-764d-4853-b601-c70e82c7bd7c] exec_fua_write: 1
[  197.509070] iSCSI:target_core_file.c:603:fd_init_rod Load FD-ROD Buffer(/volume1/@iSCSI/LUN/VDISK_BLUN/65bf822e-d3bf-479a-afae-a9d84bcf33c1/ROD)
[  197.523777] iSCSI:target_core_rodsp_server.c:156:rodsp_server_sink_register SINK-REG(65bf822e-d3bf-479a-afae-a9d84bcf33c1)
[  197.536180] iSCSI:target_core_configfs.c:2791:target_dev_enable_store process [18170] '/var/packages/Virtualization/target/bin/synocccd' successfully loaded LUN(fileio/LUN_65bf822e-d3bf-479a-afae-a9d84bcf33c1), uuid(65bf822e-d3bf-479a-afae-a9d84bcf33c1), control(fd_dev_name=/volume1/@iSCSI/LUN/VDISK_BLUN/65bf822e-d3bf-479a-afae-a9d84bcf33c1/vdisk.b260f66d-b39f-4583-af65-1f6320558c29.bd07b7b4-c3f8-400a-8a65-4833c1c0718f.2.1_00000,fd_dev_size=1073741824,thin_provision=1,block_size=512,enable_sink=65bf822e-d3bf-479a-afae-a9d84bcf33c1,fd_async_io=1,fd_rod_path=/volume1/@iSCSI/LUN/VDISK_BLUN/65bf822e-d3bf-479a-afae-a9d84bcf33c1/ROD)
[  197.599147] iSCSI:target_core_configfs.c:1105:emulate_fua_write_store [fileio/vdisk.b260f66d-b39f-4583-af65-1f6320558c29.bd07b7b4-c3f8-400a-8a65-4833c1c0718f.2.1/65bf822e-d3bf-479a-afae-a9d84bcf33c1] exec_fua_write: 1
[  197.644847] scsi host8: TCM_Loopback
[  197.649344] scsi 8:0:1:0: Direct-Access     SYNOLOGY iSCSI Storage            4.0  PQ: 0 ANSI: 5
[  197.659471] got iSCSI disk[1]
[  197.662984] sd 8:0:1:0: Attached scsi generic sg6 type 0
[  197.662986] sd 8:0:1:0: [iscsi2] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB)
[  197.663165] sd 8:0:1:0: [iscsi2] Write Protect is off
[  197.663168] sd 8:0:1:0: [iscsi2] Mode Sense: 43 00 10 08
[  197.663200] sd 8:0:1:0: [iscsi2] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  197.669208] sd 8:0:1:0: [iscsi2] Attached SCSI disk
[  197.921005] EXT4-fs (iscsi2): mounted filesystem with ordered data mode. Opts: (null)
[  198.029199] IPv6: ADDRCONF(NETDEV_CHANGE): tap02113226d198: link becomes ready
[  204.425670] IPv6: ADDRCONF(NETDEV_UP): tap0211322f8d6a: link is not ready
[  204.462302] iSCSI:target_core_file.c:603:fd_init_rod Load FD-ROD Buffer(/volume1/@iSCSI/LUN/VDISK_BLUN/2b2f48e4-bf06-4a94-a6f2-b589aedee213/ROD)
[  204.477015] iSCSI:target_core_rodsp_server.c:156:rodsp_server_sink_register SINK-REG(2b2f48e4-bf06-4a94-a6f2-b589aedee213)
[  204.489410] iSCSI:target_core_configfs.c:2791:target_dev_enable_store process [18170] '/var/packages/Virtualization/target/bin/synocccd' successfully loaded LUN(fileio/LUN_2b2f48e4-bf06-4a94-a6f2-b589aedee213), uuid(2b2f48e4-bf06-4a94-a6f2-b589aedee213), control(fd_dev_name=/volume1/@iSCSI/LUN/VDISK_BLUN/2b2f48e4-bf06-4a94-a6f2-b589aedee213/vdisk.d28a5227-ebc4-4edd-87de-433c50cda2d2.8b7b222b-e0c0-4aa8-9f7a-abdd1459fdd4.2.0_00000,fd_dev_size=53687091200,thin_provision=1,block_size=512,enable_sink=2b2f48e4-bf06-4a94-a6f2-b589aedee213,fd_async_io=1,fd_rod_path=/volume1/@iSCSI/LUN/VDISK_BLUN/2b2f48e4-bf06-4a94-a6f2-b589aedee213/ROD)
[  204.552509] iSCSI:target_core_configfs.c:1105:emulate_fua_write_store [fileio/vdisk.d28a5227-ebc4-4edd-87de-433c50cda2d2.8b7b222b-e0c0-4aa8-9f7a-abdd1459fdd4.2.0/2b2f48e4-bf06-4a94-a6f2-b589aedee213] exec_fua_write: 1
[  204.645460] iSCSI:target_core_file.c:603:fd_init_rod Load FD-ROD Buffer(/volume1/@iSCSI/LUN/VDISK_BLUN/cad36156-5fb6-454e-a6f9-d6e54941dc5a/ROD)
[  204.660147] iSCSI:target_core_rodsp_server.c:156:rodsp_server_sink_register SINK-REG(cad36156-5fb6-454e-a6f9-d6e54941dc5a)
[  204.672658] iSCSI:target_core_configfs.c:2791:target_dev_enable_store process [18170] '/var/packages/Virtualization/target/bin/synocccd' successfully loaded LUN(fileio/LUN_cad36156-5fb6-454e-a6f9-d6e54941dc5a), uuid(cad36156-5fb6-454e-a6f9-d6e54941dc5a), control(fd_dev_name=/volume1/@iSCSI/LUN/VDISK_BLUN/cad36156-5fb6-454e-a6f9-d6e54941dc5a/vdisk.d28a5227-ebc4-4edd-87de-433c50cda2d2.2d90e5f4-50c0-4224-8450-da76dfa39f9c.2.1_00000,fd_dev_size=1073741824,thin_provision=1,block_size=512,enable_sink=cad36156-5fb6-454e-a6f9-d6e54941dc5a,fd_async_io=1,fd_rod_path=/volume1/@iSCSI/LUN/VDISK_BLUN/cad36156-5fb6-454e-a6f9-d6e54941dc5a/ROD)
[  204.735893] iSCSI:target_core_configfs.c:1105:emulate_fua_write_store [fileio/vdisk.d28a5227-ebc4-4edd-87de-433c50cda2d2.2d90e5f4-50c0-4224-8450-da76dfa39f9c.2.1/cad36156-5fb6-454e-a6f9-d6e54941dc5a] exec_fua_write: 1
[  204.781618] scsi host9: TCM_Loopback
[  204.786097] scsi 9:0:1:0: Direct-Access     SYNOLOGY iSCSI Storage            4.0  PQ: 0 ANSI: 5
[  204.796175] got iSCSI disk[2]
[  204.799631] sd 9:0:1:0: Attached scsi generic sg7 type 0
[  204.799633] sd 9:0:1:0: [iscsi3] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB)
[  204.799709] sd 9:0:1:0: [iscsi3] Write Protect is off
[  204.799711] sd 9:0:1:0: [iscsi3] Mode Sense: 43 00 10 08
[  204.799735] sd 9:0:1:0: [iscsi3] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  204.814833] sd 9:0:1:0: [iscsi3] Attached SCSI disk
[  205.053762] EXT4-fs (iscsi3): mounted filesystem with ordered data mode. Opts: (null)
[  205.152986] IPv6: ADDRCONF(NETDEV_CHANGE): tap0211322f8d6a: link becomes ready

Output of lsusb command

|__usb1          1d6b:0002:0404 09  2.00  480MBit/s 0mA 1IF  (Linux 4.4.180+ xhci-hcd xHCI Host Controller 0000:00:15.0) hub
  |__1-2         051d:0002:0090 00  2.00   12MBit/s 2mA 1IF  (American Power Conversion Back-UPS BR1300G FW:863.L2 .D USB FW:L2  3B1047X47090  )
  |__1-4         f400:f400:0100 00  2.00  480MBit/s 200mA 1IF  (Synology DiskStation 7F0007DA0E13F283)
|__usb2          1d6b:0003:0404 09  3.00 5000MBit/s 0mA 1IF  (Linux 4.4.180+ xhci-hcd xHCI Host Controller 0000:00:15.0) hub
  |__2-1         0bda:8156:3100 00  3.20 5000MBit/s 256mA 1IF  (Realtek USB 10/100/1G/2.5G LAN 001000001)

Output of ifconfig -a command

eth0      Link encap:Ethernet  HWaddr 00:11:32:D5:0B:97
          UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
          RX packets:84 errors:0 dropped:0 overruns:0 frame:0
          TX packets:362 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:10908 (10.6 KiB)  TX bytes:68274 (66.6 KiB)
          Interrupt:97 base 0xc000

eth1      Link encap:Ethernet  HWaddr 00:11:32:D5:0B:98
          UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
          RX packets:84 errors:0 dropped:0 overruns:0 frame:0
          TX packets:420 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:10990 (10.7 KiB)  TX bytes:112782 (110.1 KiB)
          Interrupt:96 base 0x8000

eth2      Link encap:Ethernet  HWaddr 00:E0:4C:85:4C:FE
          inet addr:192.168.1.128  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::2e0:4cff:fe85:4cfe/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:9000  Metric:1
          RX packets:12297 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7796 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1696172 (1.6 MiB)  TX bytes:7528802 (7.1 MiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:7398 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7398 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:904209 (883.0 KiB)  TX bytes:904209 (883.0 KiB)

ovs-syste Link encap:Ethernet  HWaddr BE:E5:A9:31:63:93
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

ovs_eth0  Link encap:Ethernet  HWaddr 00:11:32:D5:0B:97
          inet addr:192.168.1.127  Bcast:192.168.255.255  Mask:255.255.0.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:362 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:0 (0.0 B)  TX bytes:68274 (66.6 KiB)

ovs_eth1  Link encap:Ethernet  HWaddr 00:11:32:D5:0B:98
          inet addr:169.254.174.40  Bcast:169.254.255.255  Mask:255.255.0.0
          inet6 addr: fe80::211:32ff:fed5:b98/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:420 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:0 (0.0 B)  TX bytes:112782 (110.1 KiB)

sit0      Link encap:IPv6-in-IPv4
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

tap021132 Link encap:Ethernet  HWaddr 2E:4C:27:C2:26:A6
          inet6 addr: fe80::2c4c:27ff:fec2:26a6/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:32 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:7168 (7.0 KiB)  TX bytes:5611 (5.4 KiB)

tap021132 Link encap:Ethernet  HWaddr 76:EE:BD:D5:65:F2
          inet6 addr: fe80::74ee:bdff:fed5:65f2/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:32 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:7114 (6.9 KiB)  TX bytes:5611 (5.4 KiB)

tap021132 Link encap:Ethernet  HWaddr 36:29:3C:AD:1F:76
          inet6 addr: fe80::3429:3cff:fead:1f76/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1133 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:53338 (52.0 KiB)  TX bytes:5611 (5.4 KiB)

[Oq6Jw1Oi4jHR1L]

Also wanted to add that I thought it was the bond I had, so I had removed them along with the vswitches in virtual machine manager. I notied that I'm not able to recreate the bond.

[bb-qq]

The current release does not support open vSwitch. I will release a supported version in near future. If you can't wait for that, PR #134 will help.

[bb-qq]

I released a new version that includes PR #134. Please feel free to re-open this issue if you still have a problem with that new driver.

[kebot]

I still have the same problem with DS920+ DSM 7.2 with latest version(2.16.3) of this driver