Compatibility of Realtek 8156B with DS411+ (x86 processor)?

Description of the problem

Does the driver exist of my 2.5 Gb USB adaptor (based on Realtek 8156B) for my NAS (DS411+, x86 processor)? Thanks!

Description of your products

DS411+ Linux Diskstation 3.10.105 #25556 SMP Thu Mar 4 18:00:36 CST 2021 x86_64 GNU/Linux synology_x86_411+ DSM 6.2.4-25556 ULT-WIIQ

Description of your environment

connect to a 2.5 Gb switch PC: Intel(R) Ethernet Controller (3) I225-V Hub: TRENDnet 5-Port Unmanaged 2.5G Switch cable category Cat.5e

Output of `dmesg` command

[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.105 (root@build3) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #25556 SMP Thu Mar 4 18:00:36 CST 2021 [ 0.000000] Command line: root=/dev/md0 ihd_num=4 netif_num=1 syno_hw_version=DS411+ macs=001132089356,00ddebe17952,00ddebe17953,00ddebe17954 sn=B1GFN01168 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f68ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000003f690000-0x000000003f69dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003f69e000-0x000000003f6dffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000003f6e0000-0x000000003fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] e820: update [mem 0x01d426a8-0x01d426b7] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000001d426a7] usable [ 0.000000] reserve setup_data: [mem 0x0000000001d426a8-0x0000000001d426b7] usable [ 0.000000] reserve setup_data: [mem 0x0000000001d426b8-0x000000003f68ffff] usable [ 0.000000] reserve setup_data: [mem 0x000000003f690000-0x000000003f69dfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000003f69e000-0x000000003f6dffff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000003f6e0000-0x000000003fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016 05/21/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x3f690 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable [ 0.000000] 2 base 03F800000 mask FFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x019d3000, 0x019d3fff] PGTABLE [ 0.000000] BRK [0x019d4000, 0x019d4fff] PGTABLE [ 0.000000] BRK [0x019d5000, 0x019d5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x3ee00000-0x3effffff] [ 0.000000] [mem 0x3ee00000-0x3effffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x3c000000-0x3edfffff] [ 0.000000] [mem 0x3c000000-0x3edfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x3bffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x3f000000-0x3f68ffff] [ 0.000000] [mem 0x3f000000-0x3f5fffff] page 2M [ 0.000000] [mem 0x3f600000-0x3f68ffff] page 4k [ 0.000000] BRK [0x019d6000, 0x019d6fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3f0fd000-0x3f67ffff] [ 0.000000] ACPI: RSDP 0x00000000000F9B70 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 0x000000003F690000 0003C (v01 052112 RSDT1409 20120521 MSFT 00000097) [ 0.000000] ACPI: FACP 0x000000003F690200 00084 (v01 052112 FACP1409 20120521 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x000000003F690440 06B21 (v01 1AAAA 1AAAA005 00000005 INTL 20051117) [ 0.000000] ACPI: FACS 0x000000003F69E000 00040 [ 0.000000] ACPI: APIC 0x000000003F690390 0006C (v01 052112 APIC1409 20120521 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x000000003F690400 0003C (v01 052112 OEMMCFG 20120521 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x000000003F69E040 00082 (v01 052112 OEMB1409 20120521 MSFT 00000097) [ 0.000000] ACPI: HPET 0x000000003F69A440 00038 (v01 052112 OEMHPET 20120521 MSFT 00000097) [ 0.000000] ACPI: GSCI 0x000000003F69E0D0 02024 (v01 052112 GMCHSCI 20120521 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003d800000-ffff88003e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x3f68ffff] [ 0.000000] On node 0 totalpages: 259630 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3495 pages used for memmap [ 0.000000] DMA32 zone: 255632 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000001d42000 - 0000000001d43000 [ 0.000000] PM: Registered nosave memory: 0000000001d42000 - 0000000001d43000 [ 0.000000] e820: [mem 0x40000000-0xfedfffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88003ee00000 s72768 r8192 d21440 u524288 [ 0.000000] pcpu-alloc: s72768 r8192 d21440 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256058 [ 0.000000] Kernel command line: root=/dev/md0 ihd_num=4 netif_num=1 syno_hw_version=DS411+ macs=001132089356,00ddebe17952,00ddebe17953,00ddebe17954 sn=B1GFN01168 [ 0.000000] Internal HD num: 4 [ 0.000000] Internal netif num: 1 [ 0.000000] Synology Hardware Version: DS411+-j [ 0.000000] Serial Number: B1GFN01168 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Memory: 1006352k/1038912k available (4776k kernel code, 392k absent, 32168k reserved, 3828k data, 760k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 4194304 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1662.215 MHz processor [ 0.002008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.43 BogoMIPS (lpj=1662215) [ 0.004007] pid_max: default: 32768 minimum: 301 [ 0.005083] Security Framework initialized [ 0.006019] AppArmor: AppArmor initialized [ 0.007032] Mount-cache hash table entries: 256 [ 0.008398] Initializing cgroup subsys memory [ 0.009038] Initializing cgroup subsys devices [ 0.010008] Initializing cgroup subsys freezer [ 0.011007] Initializing cgroup subsys blkio [ 0.012061] CPU: Physical Processor ID: 0 [ 0.013006] CPU: Processor Core ID: 0 [ 0.014006] mce: CPU supports 5 MCE banks [ 0.015017] CPU0: Thermal monitoring enabled (TM1) [ 0.016017] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8 tlb_flushall_shift: 6 [ 0.017006] FEATURE SPEC_CTRL Not Present [ 0.018005] FEATURE IBPB_SUPPORT Not Present [ 0.019009] Spectre V2 : Vulnerable: Minimal ASM retpoline [ 0.020142] Freeing SMP alternatives: 24k freed [ 0.021023] ACPI: Core revision 20130328 [ 0.028707] ACPI: All ACPI Tables successfully acquired [ 0.032533] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.043715] smpboot: CPU0: Intel(R) Atom(TM) CPU D510 @ 1.66GHz (fam: 06, model: 1c, stepping: 0a) [ 0.048000] APIC calibration not consistent with PM-Timer: 140ms instead of 100ms [ 0.048000] APIC delta adjusted to PM-Timer: 1038931 (1464885) [ 0.048025] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver. [ 0.053006] ... version: 3 [ 0.054004] ... bit width: 40 [ 0.055003] ... generic registers: 2 [ 0.056004] ... value mask: 000000ffffffffff [ 0.057004] ... max period: 000000007fffffff [ 0.058003] ... fixed-purpose events: 3 [ 0.059003] ... event mask: 0000000700000003 [ 0.003000] Disabled fast string operations [ 0.003000] Disabled fast string operations [ 0.060643] smpboot: Booting Node 0, Processors #1 #2 #3 OK [ 0.003000] Disabled fast string operations [ 0.112087] Brought up 4 CPUs [ 0.113007] smpboot: Total of 4 processors activated (13297.72 BogoMIPS) [ 0.115182] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.117008] devtmpfs: initialized [ 0.118391] PM: Registering ACPI NVS region [mem 0x3f69e000-0x3f6dffff] (270336 bytes) [ 0.120149] xor: measuring software checksum speed [ 0.131005] prefetch64-sse: 5672.000 MB/sec [ 0.142005] generic_sse: 5096.000 MB/sec [ 0.143005] xor: using function: prefetch64-sse (5672.000 MB/sec) [ 0.144135] NET: Registered protocol family 16 [ 0.147074] ACPI: bus type PCI registered [ 0.148067] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.149009] PCI: not using MMCONFIG [ 0.150005] PCI: Using configuration type 1 for base access [ 0.165213] bio: create slab at 0 [ 0.184120] raid6: sse2x1 gen() 109 MB/s [ 0.202016] raid6: sse2x1 xor() 734 MB/s [ 0.220056] raid6: sse2x2 gen() 363 MB/s [ 0.238021] raid6: sse2x2 xor() 1244 MB/s [ 0.256006] raid6: sse2x4 gen() 703 MB/s [ 0.274024] raid6: sse2x4 xor() 1359 MB/s [ 0.275006] raid6: using algorithm sse2x4 gen() (703 MB/s) [ 0.276004] raid6: .... xor() 1359 MB/s, rmw enabled [ 0.277005] raid6: using ssse3x2 recovery algorithm [ 0.278096] ACPI: Added _OSI(Module Device) [ 0.279007] ACPI: Added _OSI(Processor Device) [ 0.280006] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.281007] ACPI: Added _OSI(Processor Aggregator Device) [ 0.284567] ACPI: EC: Look up EC in DSDT [ 0.288318] ACPI: Executed 1 blocks of module-level executable AML code [ 0.298593] ACPI: Interpreter enabled [ 0.299035] ACPI: (supports S0 S4 S5) [ 0.300007] ACPI: Using IOAPIC for interrupt routing [ 0.302010] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.308801] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.310312] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.311237] ACPI: No dock devices found. [ 0.342102] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.343550] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.345386] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted [ 0.347050] PCI host bridge to bus 0000:00 [ 0.348017] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.349013] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.350008] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.351007] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.353007] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.354007] pci_bus 0000:00: root bus resource [mem 0x3f700000-0xdfffffff] [ 0.355008] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff] [ 0.356026] pci 0000:00:00.0: [8086:a000] type 00 class 0x060000 [ 0.356227] pci 0000:00:02.0: [8086:a001] type 00 class 0x030000 [ 0.356227] pci 0000:00:02.0: reg 10: [mem 0xfe880000-0xfe8fffff] [ 0.356227] pci 0000:00:02.0: reg 14: [io 0xcc00-0xcc07] [ 0.357019] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref] [ 0.357029] pci 0000:00:02.0: reg 1c: [mem 0xfe900000-0xfe9fffff] [ 0.357224] pci 0000:00:02.1: [8086:a002] type 00 class 0x038000 [ 0.357224] pci 0000:00:02.1: reg 10: [mem 0xfe780000-0xfe7fffff] [ 0.357245] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.357245] pci 0000:00:1a.0: reg 20: [io 0xc880-0xc89f] [ 0.357311] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.358073] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.358079] pci 0000:00:1a.1: reg 20: [io 0xc800-0xc81f] [ 0.359036] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.360067] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.360078] pci 0000:00:1a.2: reg 20: [io 0xc480-0xc49f] [ 0.361124] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.362068] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.362070] pci 0000:00:1a.7: reg 10: [mem 0xfe87bc00-0xfe87bfff] [ 0.363102] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.363234] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.365028] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.365108] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.365239] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.367041] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 [ 0.367109] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.367239] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.368080] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400 [ 0.368120] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.368253] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.369083] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.369083] pci 0000:00:1d.0: [8086:2934] Reading BAR - reg 10 [ 0.370015] pci 0000:00:1d.0: [8086:2934] Sizing Complete - reg 10 [ 0.371008] pci 0000:00:1d.0: [8086:2934] Reading BAR - reg 14 [ 0.372016] pci 0000:00:1d.0: [8086:2934] Sizing Complete - reg 14 [ 0.373008] pci 0000:00:1d.0: [8086:2934] Reading BAR - reg 18 [ 0.374011] pci 0000:00:1d.0: [8086:2934] Sizing Complete - reg 18 [ 0.375007] pci 0000:00:1d.0: [8086:2934] Reading BAR - reg 1c [ 0.376012] pci 0000:00:1d.0: [8086:2934] Sizing Complete - reg 1c [ 0.377007] pci 0000:00:1d.0: [8086:2934] Reading BAR - reg 20 [ 0.378012] pci 0000:00:1d.0: [8086:2934] Sizing Complete - reg 20 [ 0.379009] pci 0000:00:1d.0: reg 20: [io 0xc400-0xc41f] [ 0.379015] pci 0000:00:1d.0: [8086:2934] Reading BAR - reg 24 [ 0.380012] pci 0000:00:1d.0: [8086:2934] Sizing Complete - reg 24 [ 0.381007] pci 0000:00:1d.0: [8086:2934] Reading BAR - reg 30 [ 0.382012] pci 0000:00:1d.0: [8086:2934] Sizing Complete - reg 30 [ 0.383201] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.385064] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.385080] pci 0000:00:1d.1: reg 20: [io 0xc080-0xc09f] [ 0.385281] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.386083] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.386094] pci 0000:00:1d.2: reg 20: [io 0xc000-0xc01f] [ 0.386303] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.387075] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.387075] pci 0000:00:1d.7: reg 10: [mem 0xfe87b800-0xfe87bbff] [ 0.387163] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.387295] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.388082] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.388263] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.389074] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100 [ 0.389120] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI PM1a_EVT_BLK [??? 0x00000800-0x00000803 flags 0x80000000] [ 0.390022] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.391013] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) [ 0.393195] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.393195] pci 0000:00:1f.2: reg 10: [io 0xb400-0xb407] [ 0.393195] pci 0000:00:1f.2: reg 14: [io 0xbc00-0xbc03] [ 0.393195] pci 0000:00:1f.2: reg 18: [io 0xb880-0xb887] [ 0.393195] pci 0000:00:1f.2: reg 1c: [io 0xb800-0xb803] [ 0.393195] pci 0000:00:1f.2: reg 20: [io 0xb480-0xb49f] [ 0.393195] pci 0000:00:1f.2: reg 24: [mem 0xfe87b000-0xfe87b7ff] [ 0.393195] pci 0000:00:1f.2: PME# supported from D3hot [ 0.393354] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.393354] pci 0000:00:1f.3: reg 10: [mem 0xfe87ac00-0xfe87acff 64bit] [ 0.393354] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 0.394175] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.395096] pci 0000:02:00.0: [1095:3531] type 00 class 0x018000 [ 0.395096] pci 0000:02:00.0: reg 10: [mem 0xfeafdc00-0xfeafdc7f 64bit] [ 0.395103] pci 0000:02:00.0: reg 18: [mem 0xfeafe000-0xfeafffff 64bit] [ 0.395121] pci 0000:02:00.0: reg 20: [io 0xdc00-0xdc7f] [ 0.395219] pci 0000:02:00.0: supports D1 D2 [ 0.397027] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.399012] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.399021] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff] [ 0.399113] pci 0000:03:00.0: [8086:10d3] type 00 class 0x020000 [ 0.399113] pci 0000:03:00.0: reg 10: [mem 0xfebe0000-0xfebfffff] [ 0.399113] pci 0000:03:00.0: reg 18: [io 0xec00-0xec1f] [ 0.399134] pci 0000:03:00.0: reg 1c: [mem 0xfebdc000-0xfebdffff] [ 0.399280] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.401028] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.403011] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.403020] pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.403099] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 0.405022] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.405030] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.405036] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.405042] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.405048] pci 0000:00:1e.0: bridge window [mem 0x3f700000-0xdfffffff] (subtractive decode) [ 0.405053] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode) [ 0.405079] pcibus 0000:00: on NUMA node 0 [ 0.408425] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12 14 15) [ 0.412444] ACPI: PCI Interrupt Link [LNKB] (IRQs 5) [ 0.413726] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 15) [ 0.417144] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 15) [ 0.421338] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) 0, disabled. [ 0.426341] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) [ 0.430048] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) 0, disabled. [ 0.435340] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 15) [ 0.439511] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.440017] acpi root: _SB.PCI0 notify handler is installed [ 0.440111] Found 1 acpi root devices [ 0.441110] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.449025] vgaarb: loaded [ 0.452007] vgaarb: bridge control possible 0000:00:02.0 [ 0.457172] SCSI subsystem initialized [ 0.461012] ACPI: bus type ATA registered [ 0.466037] libata version 3.00 loaded. [ 0.466060] pps_core: LinuxPPS API ver. 1 registered [ 0.471007] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.480036] PTP clock support registered [ 0.484097] PCI: Using ACPI for IRQ routing [ 0.493964] PCI: pci_cache_line_size set to 64 bytes [ 0.494044] Expanded resource reserved due to conflict with PCI Bus 0000:00 [ 0.501008] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.501017] e820: reserve RAM buffer [mem 0x01d426a8-0x03ffffff] [ 0.501024] e820: reserve RAM buffer [mem 0x3f690000-0x3fffffff] [ 0.502121] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.510011] Switching to clocksource hpet [ 0.511228] AppArmor: AppArmor Filesystem Enabled [ 0.517774] pnp: PnP ACPI init [ 0.520871] ACPI: bus type PNP registered [ 0.525156] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.531779] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.538402] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.538508] pnp 00:01: [dma 4] [ 0.538677] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.538865] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.539043] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.539220] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.540319] pnp 00:05: [dma 0 disabled] [ 0.540671] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.541743] pnp 00:06: [dma 0 disabled] [ 0.542087] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.544235] system 00:07: [io 0x0a00-0x0a0f] has been reserved [ 0.550173] system 00:07: [io 0x0a10-0x0a1f] has been reserved [ 0.556105] system 00:07: [io 0x0a20-0x0a2f] has been reserved [ 0.562034] system 00:07: [io 0x0a30-0x0a3f] has been reserved [ 0.567961] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.568531] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.574468] system 00:08: [io 0x0800-0x087f] could not be reserved [ 0.580745] system 00:08: [io 0x0480-0x04ff] could not be reserved [ 0.587021] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.593642] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.600262] system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved [ 0.606886] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.607226] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.607519] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active) [ 0.607814] system 00:0b: [mem 0xffc00000-0xffefffff] has been reserved [ 0.614444] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.614866] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.621847] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.628476] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.628814] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved [ 0.635443] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.636130] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.643110] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.650077] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.657046] system 00:0e: [mem 0x00100000-0x3f6fffff] could not be reserved [ 0.664017] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved [ 0.670992] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.671349] pnp: PnP ACPI: found 15 devices [ 0.675545] ACPI: bus type PNP unregistered [ 0.697152] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.697165] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 [ 0.697172] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 [ 0.697188] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.697202] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 0.697227] pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment [ 0.704291] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.704299] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.704306] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.704312] pci 0000:00:1c.4: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.704319] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.704331] pci 0000:00:1c.0: BAR 8: assigned [mem 0x40000000-0x401fffff] [ 0.711128] pci 0000:00:1c.0: BAR 9: assigned [mem 0x40200000-0x403fffff 64bit pref] [ 0.718884] pci 0000:00:1c.1: BAR 9: assigned [mem 0x40400000-0x405fffff 64bit pref] [ 0.726635] pci 0000:00:1c.4: BAR 9: assigned [mem 0x40600000-0x407fffff 64bit pref] [ 0.734389] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.740488] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.745465] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.751566] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff] [ 0.758359] pci 0000:00:1c.0: bridge window [mem 0x40200000-0x403fffff 64bit pref] [ 0.766110] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.771096] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.778858] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff] [ 0.785659] pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff 64bit pref] [ 0.793412] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.798391] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.804495] pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.811297] pci 0000:00:1c.4: bridge window [mem 0x40600000-0x407fffff 64bit pref] [ 0.819046] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 0.824041] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.830105] pci 0000:00:1e.0: setting latency timer to 64 [ 0.830115] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.830121] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.830128] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.830133] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.830139] pci_bus 0000:00: resource 8 [mem 0x3f700000-0xdfffffff] [ 0.830145] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff] [ 0.830151] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.830157] pci_bus 0000:01: resource 1 [mem 0x40000000-0x401fffff] [ 0.830163] pci_bus 0000:01: resource 2 [mem 0x40200000-0x403fffff 64bit pref] [ 0.830169] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.830174] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.830180] pci_bus 0000:02: resource 2 [mem 0x40400000-0x405fffff 64bit pref] [ 0.830186] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.830192] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.830198] pci_bus 0000:03: resource 2 [mem 0x40600000-0x407fffff 64bit pref] [ 0.830204] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.830210] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.830216] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.830222] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff] [ 0.830227] pci_bus 0000:04: resource 8 [mem 0x3f700000-0xdfffffff] [ 0.830233] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfed8ffff] [ 0.830356] NET: Registered protocol family 2 [ 0.835245] TCP established hash table entries: 8192 (order: 5, 131072 bytes) [ 0.842468] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) [ 0.849081] TCP: Hash tables configured (established 8192 bind 8192) [ 0.855524] TCP: reno registered [ 0.858778] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.864721] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.871251] NET: Registered protocol family 1 [ 0.875877] RPC: Registered named UNIX socket transport module. [ 0.881810] RPC: Registered udp transport module. [ 0.886528] RPC: Registered tcp transport module. [ 0.891242] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.897710] pci 0000:00:02.0: Boot video device [ 0.899488] PCI: CLS 32 bytes, default 64 [ 1.392313] Trying to unpack rootfs image as initramfs... [ 4.299146] decompress cpio completed and skip redundant lzma [ 4.305680] Freeing initrd memory: 5644k freed [ 4.360622] Initialise module verification [ 4.365000] audit: initializing netlink socket (disabled) [ 4.370509] type=2000 audit(1640748631.369:1): initialized [ 4.385454] bounce pool size: 64 pages [ 4.389780] VFS: Disk quotas dquot_6.5.2 [ 4.393879] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 4.401116] NFS: Registering the id_resolver key type [ 4.406213] Key type id_resolver registered [ 4.410403] Key type id_legacy registered [ 4.414450] msgmni has been set to 1976 [ 4.418906] Key type asymmetric registered [ 4.423025] Asymmetric key parser 'x509' registered [ 4.428237] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 4.435648] io scheduler noop registered [ 4.439588] io scheduler deadline registered [ 4.443939] io scheduler cfq registered (default) [ 4.449195] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 4.450620] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 4.456603] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X [ 5.317091] tsc: Refined TSC clocksource calibration: 1662.294 MHz [ 5.323346] Switching to clocksource tsc [ 6.606171] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 6.636373] serial8250: ttyS0 at I/O 0x2f8 (irq = 3) is a 16550A [ 6.663463] serial8250: ttyS1 at I/O 0x3f8 (irq = 4) is a 16550A [ 6.884254] brd: module loaded [ 6.908538] Loading iSCSI transport class v2.0-870. [ 6.984157] ahci 0000:00:1f.2: version 3.0 [ 6.984509] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 6.984655] ahci: SSS flag set, parallel bus scan disabled [ 6.990270] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 6.998478] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 7.007207] ahci 0000:00:1f.2: setting latency timer to 64 [ 7.077582] scsi0 : ahci [ 7.090267] scsi1 : ahci [ 7.101299] scsi2 : ahci [ 7.108295] scsi3 : ahci [ 7.114703] scsi4 : ahci [ 7.126581] scsi5 : ahci [ 7.131509] ata1: SATA max UDMA/133 abar m2048@0xfe87b000 port 0xfe87b100 irq 43 [ 7.138980] ata2: SATA max UDMA/133 abar m2048@0xfe87b000 port 0xfe87b180 irq 43 [ 7.146408] ata3: SATA max UDMA/133 abar m2048@0xfe87b000 port 0xfe87b200 irq 43 [ 7.153813] ata4: SATA max UDMA/133 abar m2048@0xfe87b000 port 0xfe87b280 irq 43 [ 7.161213] ata5: SATA max UDMA/133 abar m2048@0xfe87b000 port 0xfe87b300 irq 43 [ 7.168615] ata6: SATA max UDMA/133 abar m2048@0xfe87b000 port 0xfe87b380 irq 43 [ 7.176017] Delay 10 seconds to wait for disk 1 ready. [ 17.487034] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 17.493841] ata1.00: ATA-10: WDC WD40EFRX-68N32N0, 82.00A82, max UDMA/133 [ 17.500652] ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 17.507875] ata1.00: SN: WD-WCC7K5KFPL9T [ 17.512791] ata1.00: configured for UDMA/133 [ 17.517768] scsi 0:0:0:0: Direct-Access WDC WD40EFRX-68N32N0 82.0 PQ: 0 ANSI: 5 [ 17.528062] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB) [ 17.535850] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 17.537412] Delay 10 seconds to wait for disk 2 ready. [ 17.546449] sd 0:0:0:0: [sda] Write Protect is off [ 17.551273] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.551366] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.605378] sda: sda1 sda2 sda5 [ 17.613073] sd 0:0:0:0: [sda] Attached SCSI disk [ 27.843037] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 27.849855] ata2.00: ATA-10: WDC WD40EFRX-68N32N0, 82.00A82, max UDMA/133 [ 27.856646] ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 27.863869] ata2.00: SN: WD-WCC7K7EV6A26 [ 27.868779] ata2.00: configured for UDMA/133 [ 27.873780] scsi 1:0:0:0: Direct-Access WDC WD40EFRX-68N32N0 82.0 PQ: 0 ANSI: 5 [ 27.884145] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB) [ 27.889106] Delay 10 seconds to wait for disk 3 ready. [ 27.897110] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 27.902663] sd 1:0:0:0: [sdb] Write Protect is off [ 27.907521] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 27.907705] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.962097] sdb: sdb1 sdb2 sdb5 [ 27.969541] sd 1:0:0:0: [sdb] Attached SCSI disk [ 38.195035] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 38.201847] ata3.00: ATA-10: WDC WD40EFRX-68N32N0, 82.00A82, max UDMA/133 [ 38.208657] ata3.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 38.215882] ata3.00: SN: WD-WCC7K5KFPXZV [ 38.220799] ata3.00: configured for UDMA/133 [ 38.225819] scsi 2:0:0:0: Direct-Access WDC WD40EFRX-68N32N0 82.0 PQ: 0 ANSI: 5 [ 38.236186] sd 2:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB) [ 38.244009] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 38.249585] sd 2:0:0:0: [sdc] Write Protect is off [ 38.254426] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 38.254583] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 38.307867] sdc: sdc1 sdc2 sdc5 [ 38.313325] sd 2:0:0:0: [sdc] Attached SCSI disk [ 38.553037] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 38.559856] ata4.00: ATA-10: WDC WD40EFRX-68N32N0, 82.00A82, max UDMA/133 [ 38.566661] ata4.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 38.573885] ata4.00: SN: WD-WCC7K5KFPPR8 [ 38.578802] ata4.00: configured for UDMA/133 [ 38.583802] scsi 3:0:0:0: Direct-Access WDC WD40EFRX-68N32N0 82.0 PQ: 0 ANSI: 5 [ 38.594136] sd 3:0:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB) [ 38.601943] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 38.607573] sd 3:0:0:0: [sdd] Write Protect is off [ 38.612408] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 38.612544] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 38.667968] sdd: sdd1 sdd2 sdd5 [ 38.673429] sd 3:0:0:0: [sdd] Attached SCSI disk [ 38.915035] ata5: SATA link down (SStatus 0 SControl 300) [ 38.920452] ata5: No present pin info for SATA link down event [ 39.231031] ata6: SATA link down (SStatus 0 SControl 300) [ 39.236447] ata6: No present pin info for SATA link down event [ 39.243337] sata_sil24 0000:02:00.0: version 1.1 [ 40.245056] scsi6 : sata_sil24 [ 40.251370] ata7: SATA max UDMA/100 host m128@0xfeafdc00 port 0xfeafe000 irq 17 [ 40.258798] ata7: limiting SATA link speed to 1.5 Gbps [ 42.283044] ata7: SATA link down (SStatus 0 SControl 10) [ 42.288376] ata7: No present pin info for SATA link down event [ 42.302317] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 42.313470] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 42.318541] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 42.327176] rtc_cmos 00:02: RTC can wake from S4 [ 42.332658] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 42.338899] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 42.352356] i2c /dev entries driver [ 42.360958] it87: Found IT8720F chip at 0xa10, revision 8 [ 42.366429] it87: VID is disabled (pins used for GPIO) [ 42.376186] md: linear personality registered for level -1 [ 42.381748] md: raid0 personality registered for level 0 [ 42.387084] md: raid1 personality registered for level 1 [ 42.392425] md: raid10 personality registered for level 10 [ 42.398357] md: raid6 personality registered for level 6 [ 42.403703] md: raid5 personality registered for level 5 [ 42.409036] md: raid4 personality registered for level 4 [ 42.414834] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com [ 42.423353] cpuidle: using governor ladder [ 42.427473] cpuidle: using governor menu [ 42.431603] TCP: cubic registered [ 42.434941] NET: Registered protocol family 17 [ 42.439458] Key type dns_resolver registered [ 42.464404] Loading module verification blacklist certificates [ 42.470299] Loading module verification certificates [ 42.475411] MODSIGN: Loaded cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' [ 42.491466] MODSIGN: Loaded cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' [ 42.501866] MODSIGN: Loaded cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' [ 42.513725] MODSIGN: Loaded cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' [ 42.523828] registered taskstats version 1 [ 42.528572] rtc_cmos 00:02: setting system clock to 2021-12-29 03:31:11 UTC (1640748671) [ 42.538982] Freeing unused kernel memory: 760k freed [ 42.544366] Write protecting the kernel read-only data: 8192k [ 42.550538] Freeing unused kernel memory: 1356k freed [ 42.560139] Freeing unused kernel memory: 536k freed [ 42.768947] ACPI: bus type USB registered [ 42.773692] usbcore: registered new interface driver usbfs [ 42.779668] usbcore: registered new interface driver hub [ 42.786328] usbcore: registered new interface driver ethub [ 42.792400] usbcore: registered new device driver usb [ 42.849660] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 42.873994] ehci-pci: EHCI PCI platform driver [ 42.878685] ehci-pci 0000:00:1a.7: setting latency timer to 64 [ 42.878708] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 42.883957] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 42.891370] ehci-pci 0000:00:1a.7: debug port 1 [ 42.899838] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 42.899881] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe87bc00 [ 42.911028] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 42.917712] hub 1-0:1.0: USB hub found [ 42.921544] hub 1-0:1.0: 6 ports detected [ 42.926031] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 42.926049] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 42.931319] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 42.938779] ehci-pci 0000:00:1d.7: debug port 1 [ 42.947284] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 42.947363] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe87b800 [ 42.959059] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 42.965807] hub 2-0:1.0: USB hub found [ 42.969729] hub 2-0:1.0: 6 ports detected [ 43.013879] uhci_hcd: USB Universal Host Controller Interface driver [ 43.020473] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 43.020483] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 43.025728] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 43.033195] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c880 [ 43.039818] hub 3-0:1.0: USB hub found [ 43.043637] hub 3-0:1.0: 2 ports detected [ 43.048122] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 43.048137] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 43.053425] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 43.060956] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800 [ 43.067769] hub 4-0:1.0: USB hub found [ 43.071634] hub 4-0:1.0: 2 ports detected [ 43.076268] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 43.076283] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 43.081567] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 43.089095] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c480 [ 43.096522] hub 5-0:1.0: USB hub found [ 43.100440] hub 5-0:1.0: 2 ports detected [ 43.104983] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 43.104997] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 43.110296] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 43.117814] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400 [ 43.126304] hub 6-0:1.0: USB hub found [ 43.130144] hub 6-0:1.0: 2 ports detected [ 43.134680] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 43.134696] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 43.140004] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 43.147517] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080 [ 43.154486] hub 7-0:1.0: USB hub found [ 43.158406] hub 7-0:1.0: 2 ports detected [ 43.163007] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 43.163064] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 43.168359] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 43.175926] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000 [ 43.183491] hub 8-0:1.0: USB hub found [ 43.187328] hub 8-0:1.0: 2 ports detected [ 43.302113] pineview_synobios: module license 'Synology Inc.' taints kernel. [ 43.309176] Disabling lock debugging due to kernel taint [ 43.315569] 2021-12-29 3:31:12 UTC [ 43.318084] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 43.325584] synobios: load, major number 201 [ 43.329881] Brand: Synology [ 43.332729] Model: DS-411+ [ 43.335474] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 43.578032] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 43.844067] synobios cpu_arch proc entry initialized [ 43.849051] synobios crypto_hw proc entry initialized [ 43.854109] synobios syno_platform proc entry initialized [ 43.859548] synobios open /dev/ttyS1 success [ 43.884864] synobios: unload [ 43.913361] md: Autodetecting RAID arrays. [ 43.958216] md: invalid raid superblock magic on sda5 [ 43.963291] md: sda5 does not have a valid v0.90 superblock, not importing! [ 44.007847] md: invalid raid superblock magic on sdb5 [ 44.012912] md: sdb5 does not have a valid v0.90 superblock, not importing! [ 44.073171] md: invalid raid superblock magic on sdc5 [ 44.078239] md: sdc5 does not have a valid v0.90 superblock, not importing! [ 44.115358] md: invalid raid superblock magic on sdd5 [ 44.120427] md: sdd5 does not have a valid v0.90 superblock, not importing! [ 44.127410] md: Scanned 12 and added 8 devices. [ 44.131960] md: autorun ... [ 44.134773] md: considering sda1 ... [ 44.138372] md: adding sda1 ... [ 44.141623] md: sda2 has different UUID to sda1 [ 44.146176] md: adding sdb1 ... [ 44.149423] md: sdb2 has different UUID to sda1 [ 44.153978] md: adding sdc1 ... [ 44.157222] md: sdc2 has different UUID to sda1 [ 44.161778] md: adding sdd1 ... [ 44.165022] md: sdd2 has different UUID to sda1 [ 44.169590] md: created md0 [ 44.172404] md: bind [ 44.175155] md: bind [ 44.177904] md: bind [ 44.180653] md: bind [ 44.183395] md: running: [ 44.188759] md/raid1:md0: active with 4 out of 4 mirrors [ 44.223959] md0: detected capacity change from 0 to 2549940224 [ 44.230119] md: considering sda2 ... [ 44.233721] md: adding sda2 ... [ 44.236976] md: adding sdb2 ... [ 44.240224] md: adding sdc2 ... [ 44.243510] md: adding sdd2 ... [ 44.247971] md: created md1 [ 44.250848] md: bind [ 44.253657] md: bind [ 44.256481] md: bind [ 44.259250] md: bind [ 44.262018] md: running: [ 44.267482] md/raid1:md1: active with 4 out of 4 mirrors [ 44.292642] md1: detected capacity change from 0 to 2147418112 [ 44.298795] md: ... autorun DONE. [ 44.567506] md0: unknown partition table [ 46.523853] EXT4-fs (md0): barriers disabled [ 46.536548] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: [ 48.943281] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [ 49.901003] EXT4-fs (md0): re-mounted. Opts: (null) [ 56.527882] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 56.533422] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 56.539041] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 56.544669] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 57.232212] md1: unknown partition table [ 57.368122] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k [ 58.751759] systemd-udevd[4710]: starting version 204 [ 64.225995] NET: Registered protocol family 10 [ 64.299146] sit: IPv6 over IPv4 tunneling driver [ 64.815763] init: syno-auth-check main process (6686) killed by TERM signal [ 65.801080] fuse init (API version 7.22) [ 65.907226] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI [ 65.913349] e1000e: Copyright(c) 1999 - 2016 Intel Corporation. [ 65.919669] e1000e 0000:03:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 65.929056] e1000e 0000:03:00.0: irq 44 for MSI/MSI-X [ 66.039230] e1000e 0000:03:00.0 eth0: registered PHC clock [ 66.044774] e1000e 0000:03:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:24:1d:16:5b:c5 [ 66.052741] e1000e 0000:03:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 66.059821] e1000e 0000:03:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 66.188331] Loading modules backported from Linux version v3.18.1-0-g39ca484 [ 66.195433] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c [ 66.413971] exFAT: Version 1.2.9 [ 66.572885] 2021-12-29 3:31:35 UTC [ 66.576333] synobios: load, major number 201 [ 66.580616] Brand: Synology [ 66.583469] Model: DS-411+ [ 66.586207] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 67.095065] synobios cpu_arch proc entry initialized [ 67.100044] synobios crypto_hw proc entry initialized [ 67.105111] synobios syno_platform proc entry initialized [ 67.110581] synobios open /dev/ttyS1 success [ 68.456376] e1000e 0000:03:00.0: irq 44 for MSI/MSI-X [ 68.557135] e1000e 0000:03:00.0: irq 44 for MSI/MSI-X [ 68.557693] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 70.902458] md: md2 stopped. [ 70.942715] md: bind [ 70.946052] md: bind [ 70.949580] md: bind [ 70.951382] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 70.951761] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 70.973154] md: bind [ 71.017131] md/raid:md2: device sda5 operational as raid disk 0 [ 71.023137] md/raid:md2: device sdd5 operational as raid disk 3 [ 71.029113] md/raid:md2: device sdc5 operational as raid disk 2 [ 71.035126] md/raid:md2: device sdb5 operational as raid disk 1 [ 71.043066] md/raid:md2: allocated 4348kB [ 71.065575] md/raid:md2: raid level 5 active with 4 out of 4 devices, algorithm 2 [ 71.073117] RAID conf printout: [ 71.073130] --- level:5 rd:4 wd:4 [ 71.073139] disk 0, o:1, dev:sda5 [ 71.073145] disk 1, o:1, dev:sdb5 [ 71.073153] disk 2, o:1, dev:sdc5 [ 71.073159] disk 3, o:1, dev:sdd5 [ 71.106079] md2: detected capacity change from 0 to 11987519864832 [ 71.122915] md2: unknown partition table [ 71.842484] bio: create slab at 1 [ 75.351412] EXT4-fs (dm-0): barriers disabled [ 76.421518] EXT4-fs (dm-0): recovery complete [ 76.446059] EXT4-fs (dm-0): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc [ 81.329216] Synotify use 16384 event queue size [ 81.334043] Synotify use 16384 event queue size [ 81.805213] usb-storage 2-1:1.0: USB Mass Storage device detected [ 81.831627] scsi7 : usb-storage 2-1:1.0 [ 81.835789] usb-storage 2-2:1.0: USB Mass Storage device detected [ 81.856097] scsi8 : usb-storage 2-2:1.0 [ 81.860266] usbcore: registered new interface driver usb-storage [ 81.987183] usbcore: registered new interface driver usblp [ 82.268001] usbcore: registered new interface driver usbhid [ 82.273633] usbhid: USB HID core driver [ 82.843714] scsi 7:0:0:0: Direct-Access Synology USBstation 1.0 PQ: 0 ANSI: 2 [ 82.855665] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 82.864884] sd 7:0:0:0: [synoboot] 250880 512-byte logical blocks: (128 MB/122 MiB) [ 82.874273] sd 7:0:0:0: [synoboot] Write Protect is off [ 82.879674] sd 7:0:0:0: [synoboot] Mode Sense: 00 00 00 00 [ 82.884481] scsi 8:0:0:0: Direct-Access Storex WeZee-Disk 5438 PQ: 0 ANSI: 6 [ 82.896132] sd 8:0:0:0: [sdq] 1953525164 512-byte logical blocks: (1.00 TB/931 GiB) [ 82.905325] sd 8:0:0:0: [sdq] Write Protect is off [ 82.910171] sd 8:0:0:0: [sdq] Mode Sense: 23 00 00 00 [ 82.912442] sd 8:0:0:0: [sdq] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 82.927103] sd 7:0:0:0: [synoboot] Asking for cache data failed [ 82.933077] sd 7:0:0:0: [synoboot] Assuming drive cache: write through [ 82.977848] sd 7:0:0:0: [synoboot] Asking for cache data failed [ 82.983832] sd 7:0:0:0: [synoboot] Assuming drive cache: write through [ 83.047781] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 83.080412] synoboot: synoboot1 synoboot2 [ 83.089130] sd 7:0:0:0: [synoboot] Asking for cache data failed [ 83.095100] sd 7:0:0:0: [synoboot] Assuming drive cache: write through [ 83.101693] sd 7:0:0:0: [synoboot] Attached SCSI disk [ 83.209730] init: pkg-synoreport main process (9676) terminated with status 1 [ 83.726141] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(001132089356). [ 83.775946] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized [ 83.862275] iSCSI:target_core_device.c:617:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 83.874614] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully [ 83.995586] iSCSI:target_core_file.c:146:fd_attach_hba RODSP plugin for fileio is enabled. [ 84.003921] iSCSI:target_core_file.c:153:fd_attach_hba ODX Token Manager is enabled. [ 84.038103] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled. [ 84.053153] iSCSI:target_core_ep.c:786:ep_attach_hba RODSP plugin for epio is enabled. [ 84.061161] iSCSI:target_core_ep.c:793:ep_attach_hba ODX Token Manager is enabled. [ 85.547261] sdq: sdq1 [ 85.590047] sd 8:0:0:0: [sdq] Attached SCSI disk [ 87.755346] ata1.00: configured for UDMA/133 [ 87.759685] ata1: EH complete [ 87.956695] warning: nginx' uses 32-bit capabilities (legacy support in use) [ 87.958792] warning:nginx' uses 32-bit capabilities (legacy support in use) [ 88.195379] ata2.00: configured for UDMA/133 [ 88.199734] ata2: EH complete [ 88.497892] ata3.00: configured for UDMA/133 [ 88.502219] ata3: EH complete [ 88.833319] ata4.00: configured for UDMA/133 [ 88.837672] ata4: EH complete [ 92.160137] loop: module loaded [ 95.962562] init: syno_disk_latency_monitor faild on spawn stage, stopped [ 104.816548] perf interrupt took too long (2535 > 5000), lowering kernel.perf_event_max_sample_rate to 50000 [ 104.999389] ip_tables: (C) 2000-2006 Netfilter Core Team [ 105.184462] nf_conntrack version 0.5.0 (7927 buckets, 31708 max) [ 105.852097] init: syno-check-disk-compatibility main process (12582) terminated with status 255 [ 106.414648] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 106.978501] aufs 3.10.x-20141110 [ 107.068297] Bridge firewalling registered [ 113.056084] Synotify use 16384 event queue size [ 113.060792] Synotify use 16384 event queue size [ 113.898224] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 116.484569] aufs au_opts_verify:1571:dockerd[12941]: dirperm1 breaks the protection by the permission bits on the lower branch [ 451.863900] perf interrupt took too long (5002 > 10000), lowering kernel.perf_event_max_sample_rate to 25000 [77558.334079] Synotify use 16384 event queue size [83922.205166] init: logrotate main process (12320) terminated with status 1 [107185.063776] init: logrotate main process (11387) terminated with status 1 [137796.598748] init: logrotate main process (11396) terminated with status 1 [142695.513385] init: logrotate main process (20176) terminated with status 1 [345245.838636] init: logrotate main process (18945) terminated with status 1 [514733.635664] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1) [514733.635673] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1) [514733.635697] mce: [Hardware Error]: CPU 2: Machine Check: 0 Bank 128: 0000000088010003 [514733.635703] mce: [Hardware Error]: TSC 30a3b89913918 [514733.635717] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641263363 SOCKET 0 APIC 1 microcode 107 [514733.636424] CPU2: Core temperature/speed normal [514733.636429] mce: [Hardware Error]: CPU 2: Machine Check: 0 Bank 128: 0000000088010002 [514733.636432] mce: [Hardware Error]: TSC 30a3b89a42d84 [514733.636436] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641263363 SOCKET 0 APIC 1 microcode 107 [514733.698663] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 128: 0000000088010003 [514733.708315] mce: [Hardware Error]: TSC 30a3b9016cb5e [514733.712706] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641263363 SOCKET 0 APIC 0 microcode 107 [514733.722536] CPU0: Core temperature/speed normal [514733.727753] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 128: 0000000088010002 [514733.731379] mce: [Hardware Error]: TSC 30a3b92c436fc [514733.741617] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641263363 SOCKET 0 APIC 0 microcode 107 [514752.730694] CPU3: Core temperature above threshold, cpu clock throttled (total events = 1) [514752.730703] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1) [514752.730728] mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 128: 0000000088010003 [514752.730738] mce: [Hardware Error]: TSC 30a42ed8a068c [514752.730748] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641263382 SOCKET 0 APIC 2 microcode 107 [514752.731454] CPU1: Core temperature/speed normal [514752.731461] mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 128: 0000000088010002 [514752.731464] mce: [Hardware Error]: TSC 30a42ed9d0034 [514752.731467] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641263382 SOCKET 0 APIC 2 microcode 107 [514752.771407] mce: [Hardware Error]: CPU 3: Machine Check: 0 Bank 128: 0000000088010003 [514752.771407] mce: [Hardware Error]: TSC 30a42f40f70e6 [514752.771407] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641263382 SOCKET 0 APIC 3 microcode 107 [514752.771407] CPU3: Core temperature/speed normal [514752.771407] mce: [Hardware Error]: CPU 3: Machine Check: 0 Bank 128: 0000000088010002 [514752.771407] mce: [Hardware Error]: TSC 30a42f6b5f77a [514752.836135] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641263382 SOCKET 0 APIC 3 microcode 107 [514800.694029] mce: [Hardware Error]: Machine check events logged [514804.977896] perf interrupt took too long (10041 > 19230), lowering kernel.perf_event_max_sample_rate to 13000 [515033.637466] CPU2: Core temperature/speed normal [515033.638025] mce: [Hardware Error]: CPU 2: Machine Check: 0 Bank 128: 00000000087f0022 [515033.638025] mce: [Hardware Error]: TSC 30aafa6d16448 [515033.638025] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641263663 SOCKET 0 APIC 1 microcode 107 [515033.725003] CPU0: Core temperature/speed normal [515033.725050] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 128: 00000000087f0022 [515033.734146] mce: [Hardware Error]: TSC 30aafaf7cc1d2 [515033.734146] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641263663 SOCKET 0 APIC 0 microcode 107 [515052.731171] CPU1: Core temperature above threshold, cpu clock throttled (total events = 136516) [515052.732011] mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 128: 0000000088000023 [515052.732011] mce: [Hardware Error]: TSC 30ab70b188b3c [515052.732011] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641263682 SOCKET 0 APIC 2 microcode 107 [515052.818281] CPU3: Core temperature/speed normal [515052.819035] mce: [Hardware Error]: CPU 3: Machine Check: 0 Bank 128: 0000000088000022 [515052.819035] mce: [Hardware Error]: TSC 30ab713451f00 [515052.819035] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641263682 SOCKET 0 APIC 3 microcode 107 [515100.697073] mce: [Hardware Error]: Machine check events logged [515333.640176] CPU2: Core temperature above threshold, cpu clock throttled (total events = 353254) [515333.648056] mce: [Hardware Error]: CPU 2: Machine Check: 0 Bank 128: 0000000088000023 [515333.648056] mce: [Hardware Error]: TSC 30b23c41adb32 [515333.648056] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641263963 SOCKET 0 APIC 1 microcode 107 [515333.733242] CPU0: Core temperature above threshold, cpu clock throttled (total events = 353363) [515333.742950] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 128: 00000000087f0023 [515333.745645] mce: [Hardware Error]: TSC 30b23cd55e188 [515333.745645] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641263963 SOCKET 0 APIC 0 microcode 107 [515352.732441] CPU1: Core temperature above threshold, cpu clock throttled (total events = 357138) [515352.733014] mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 128: 0000000088000023 [515352.733014] mce: [Hardware Error]: TSC 30b2b27c8e0be [515352.733014] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641263982 SOCKET 0 APIC 2 microcode 107 [515352.820366] CPU3: Core temperature above threshold, cpu clock throttled (total events = 357214) [515352.821013] mce: [Hardware Error]: CPU 3: Machine Check: 0 Bank 128: 0000000088000023 [515352.821013] mce: [Hardware Error]: TSC 30b2b307c0dda [515352.821013] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641263982 SOCKET 0 APIC 3 microcode 107 [515400.700081] mce: [Hardware Error]: Machine check events logged [515633.641104] CPU2: Core temperature above threshold, cpu clock throttled (total events = 492791) [515633.642069] mce: [Hardware Error]: CPU 2: Machine Check: 0 Bank 128: 00000000087f0023 [515633.642069] mce: [Hardware Error]: TSC 30b97e0c186c2 [515633.642069] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641264263 SOCKET 0 APIC 1 microcode 107 [515633.642069] CPU2: Core temperature/speed normal [515633.642069] mce: [Hardware Error]: CPU 2: Machine Check: 0 Bank 128: 0000000088000022 [515633.642069] mce: [Hardware Error]: TSC 30b97e39c21b8 [515633.642069] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641264263 SOCKET 0 APIC 1 microcode 107 [515633.733044] CPU0: Core temperature/speed normal [515633.734019] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 128: 0000000088000022 [515633.742445] mce: [Hardware Error]: TSC 30b97e96bd35e [515633.742445] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641264263 SOCKET 0 APIC 0 microcode 107 [515652.732308] CPU1: Core temperature/speed normal [515652.733034] mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 128: 00000000087f0022 [515652.745500] mce: [Hardware Error]: TSC 30b9f43e917e0 [515652.745500] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641264282 SOCKET 0 APIC 2 microcode 107 [515652.820447] CPU3: Core temperature above threshold, cpu clock throttled (total events = 579966) [515652.826243] mce: [Hardware Error]: CPU 3: Machine Check: 0 Bank 128: 0000000088000023 [515652.826243] mce: [Hardware Error]: TSC 30b9f4d0da746 [515652.826243] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641264282 SOCKET 0 APIC 3 microcode 107 [515700.703153] mce: [Hardware Error]: Machine check events logged [515933.675428] CPU2: Core temperature/speed normal [515933.676032] mce: [Hardware Error]: CPU 2: Machine Check: 0 Bank 128: 00000000087f0022 [515933.676032] mce: [Hardware Error]: TSC 30c0c004a359c [515933.676032] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641264563 SOCKET 0 APIC 1 microcode 107 [515933.735356] CPU0: Core temperature/speed normal [515933.739060] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 128: 00000000087f0022 [515933.745776] mce: [Hardware Error]: TSC 30c0c0638f826 [515933.752734] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641264563 SOCKET 0 APIC 0 microcode 107 [515952.732229] CPU1: Core temperature above threshold, cpu clock throttled (total events = 772139) [515952.733020] mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 128: 00000000087f0023 [515952.733020] mce: [Hardware Error]: TSC 30c1360ee11b4 [515952.733020] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641264582 SOCKET 0 APIC 2 microcode 107 [515952.733020] CPU1: Core temperature/speed normal [515952.733020] mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 128: 0000000088000022 [515952.733020] mce: [Hardware Error]: TSC 30c1363d08420 [515952.733020] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641264582 SOCKET 0 APIC 2 microcode 107 [515952.820551] CPU3: Core temperature/speed normal [515952.821022] mce: [Hardware Error]: CPU 3: Machine Check: 0 Bank 128: 0000000088000022 [515952.832498] mce: [Hardware Error]: TSC 30c13693836f6 [515952.832498] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641264582 SOCKET 0 APIC 3 microcode 107 [516150.694079] mce: [Hardware Error]: Machine check events logged [516233.687846] CPU2: Core temperature/speed normal [516233.688016] mce: [Hardware Error]: CPU 2: Machine Check: 0 Bank 128: 00000000087f0022 [516233.688016] mce: [Hardware Error]: TSC 30c801e16a1cc [516233.688016] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641264863 SOCKET 0 APIC 1 microcode 107 [516233.751238] CPU0: Core temperature/speed normal [516233.752800] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 128: 00000000087e0022 [516233.763708] mce: [Hardware Error]: TSC 30c80245efbd8 [516233.769177] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641264863 SOCKET 0 APIC 0 microcode 107 [516252.732091] CPU1: Core temperature above threshold, cpu clock throttled (total events = 963903) [516252.733008] mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 128: 00000000087f0023 [516252.748066] mce: [Hardware Error]: TSC 30c877d75b048 [516252.748066] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641264882 SOCKET 0 APIC 2 microcode 107 [516252.821839] CPU3: Core temperature above threshold, cpu clock throttled (total events = 964012) [516252.829749] mce: [Hardware Error]: CPU 3: Machine Check: 0 Bank 128: 0000000088000023 [516252.835630] mce: [Hardware Error]: TSC 30c8786592974 [516252.835630] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641264882 SOCKET 0 APIC 3 microcode 107 [516300.700092] mce: [Hardware Error]: Machine check events logged [516533.687496] CPU2: Core temperature/speed normal [516533.688040] mce: [Hardware Error]: CPU 2: Machine Check: 0 Bank 128: 00000000087f0022 [516533.688040] mce: [Hardware Error]: TSC 30cf43aac4ab6 [516533.688040] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641265163 SOCKET 0 APIC 1 microcode 107 [516533.771315] CPU0: Core temperature above threshold, cpu clock throttled (total events = 937235) [516533.780696] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 128: 0000000088000023 [516533.781533] mce: [Hardware Error]: TSC 30cf4436dde62 [516533.789813] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641265163 SOCKET 0 APIC 0 microcode 107 [516552.732609] CPU1: Core temperature/speed normal [516552.733027] mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 128: 0000000088000022 [516552.733027] mce: [Hardware Error]: TSC 30cfb99b1d4de [516552.733027] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641265182 SOCKET 0 APIC 2 microcode 107 [516552.821728] CPU3: Core temperature above threshold, cpu clock throttled (total events = 1105851) [516552.822024] mce: [Hardware Error]: CPU 3: Machine Check: 0 Bank 128: 0000000088000023 [516552.831395] mce: [Hardware Error]: TSC 30cfba2fabe20 [516552.831395] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641265182 SOCKET 0 APIC 3 microcode 107 [516750.697159] mce: [Hardware Error]: Machine check events logged [516833.691292] CPU2: Core temperature/speed normal [516833.692030] mce: [Hardware Error]: CPU 2: Machine Check: 0 Bank 128: 00000000087f0022 [516833.692030] mce: [Hardware Error]: TSC 30d6857b38a2e [516833.692030] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641265463 SOCKET 0 APIC 1 microcode 107 [516833.771817] CPU0: Core temperature/speed normal [516833.772019] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 128: 00000000087f0022 [516833.781743] mce: [Hardware Error]: TSC 30d685faf3822 [516833.790687] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641265463 SOCKET 0 APIC 0 microcode 107 [516852.762962] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1284130) [516852.763034] mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 128: 0000000088000023 [516852.763034] mce: [Hardware Error]: TSC 30d6fb9cfad3a [516852.784931] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641265482 SOCKET 0 APIC 2 microcode 107 [516852.821075] CPU3: Core temperature/speed normal [516852.822029] mce: [Hardware Error]: CPU 3: Machine Check: 0 Bank 128: 0000000088000022 [516852.822029] mce: [Hardware Error]: TSC 30d6fbf217340 [516852.822029] mce: [Hardware Error]: PROCESSOR 0:106ca TIME 1641265482 SOCKET 0 APIC 3 microcode 107 [1095430.022998] ip6_tables: (C) 2000-2006 Netfilter Core Team [1095430.196863] aufs 3.10.x-20141110 [1095430.255310] Bridge firewalling registered [1095436.214511] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [1095437.951081] aufs au_opts_verify:1571:dockerd[26365]: dirperm1 breaks the protection by the permission bits on the lower branch [1299721.654034] usb 2-3: new high-speed USB device number 4 using ehci-pci [1300586.857190] e1000e: eth0 NIC Link is Down [1300589.752798] init: scsi_plugin_server main process (10020) killed by TERM signal [1300590.118602] init: nmbd main process (4604) killed by TERM signal [1301808.779040] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [1301810.382214] init: nmbd main process (4706) killed by TERM signal [1301811.916599] init: scsi_plugin_server main process (4621) killed by TERM signal [1301813.002772] init: nmbd main process (7562) killed by TERM signal [1301816.782438] init: scsi_plugin_server main process (7606) killed by TERM signal [1301819.580859] init: iscsi_pluginserverd main process (8381) killed by TERM signal [1301819.616221] init: iscsi_pluginengined main process (8370) killed by TERM signal [1301819.830306] init: scsi_plugin_server main process (8398) killed by TERM signal [1302792.459198] e1000e: eth0 NIC Link is Down [1302795.327366] init: scsi_plugin_server main process (8809) killed by TERM signal [1302795.403720] init: nmbd main process (11284) killed by TERM signal [1302857.465048] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [1302859.050893] init: nmbd main process (11380) killed by TERM signal [1302860.615889] init: scsi_plugin_server main process (11312) killed by TERM signal [1302861.806106] init: nmbd main process (12131) killed by TERM signal [1302867.938559] init: scsi_plugin_server main process (12213) killed by TERM signal [1302869.962779] init: iscsi_pluginserverd main process (12181) killed by KILL signal [1302870.025616] init: scsi_plugin_server main process (13424) killed by TERM signal [1302887.208190] e1000e: eth0 NIC Link is Down [1302889.932371] init: nmbd main process (13771) killed by TERM signal [1302890.043914] init: scsi_plugin_server main process (13481) killed by TERM signal [1302890.444181] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [1302894.728180] init: nmbd main process (14392) killed by TERM signal [1302895.706912] init: scsi_plugin_server main process (13820) killed by TERM signal [1302897.608127] init: iscsi_pluginserverd main process (14775) killed by TERM signal [1302897.643198] init: iscsi_pluginengined main process (14756) killed by TERM signal [1302897.900549] init: scsi_plugin_server main process (14815) killed by TERM signal [1302901.093819] init: iscsi_pluginserverd main process (15108) killed by TERM signal [1302901.109175] init: iscsi_pluginengined main process (15103) killed by TERM signal [1302901.225952] init: scsi_plugin_server main process (15123) killed by TERM signal [1302921.668192] e1000e: eth0 NIC Link is Down [1302924.440441] init: scsi_plugin_server main process (15474) killed by TERM signal [1302924.544567] init: nmbd main process (16161) killed by TERM signal [1302975.896043] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [1302978.840939] init: scsi_plugin_server main process (16202) killed by TERM signal [1302978.971131] init: nmbd main process (16981) killed by TERM signal [1302986.197968] init: scsi_plugin_server main process (17012) killed by TERM signal [1302988.067962] init: iscsi_pluginserverd main process (17002) killed by KILL signal [1302988.195920] init: scsi_plugin_server main process (18092) killed by TERM signal [1303014.674189] e1000e: eth0 NIC Link is Down [1303017.572144] init: scsi_plugin_server main process (18257) killed by TERM signal [1303017.599590] init: nmbd main process (18765) killed by TERM signal [1303058.540049] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [1303061.730743] init: scsi_plugin_server main process (18788) killed by TERM signal [1303062.954141] init: nmbd main process (19543) killed by TERM signal [1303068.556311] init: nmbd main process (20274) killed by TERM signal [1303068.985278] init: scsi_plugin_server main process (19599) killed by TERM signal [1303070.734241] e1000e: eth0 NIC Link is Down [1303072.017548] init: iscsi_pluginserverd main process (19588) killed by KILL signal [1303072.373954] init: scsi_plugin_server main process (20706) killed by TERM signal [1303073.464118] init: iscsi_pluginserverd main process (21015) killed by TERM signal [1303073.496849] init: iscsi_pluginengined main process (21013) killed by TERM signal [1303073.628929] init: scsi_plugin_server main process (21029) killed by TERM signal [1303073.872369] init: nmbd main process (21135) killed by TERM signal [1303078.579047] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [1303080.131341] init: nmbd main process (21227) killed by TERM signal [1303081.527885] init: scsi_plugin_server main process (21153) killed by TERM signal [1303081.623402] init: nmbd main process (21848) killed by TERM signal [1303086.967689] init: scsi_plugin_server main process (21881) killed by TERM signal [1303089.158708] init: iscsi_pluginserverd main process (22733) killed by TERM signal [1303089.183355] init: iscsi_pluginengined main process (22731) killed by TERM signal [1303089.328834] init: scsi_plugin_server main process (22762) killed by TERM signal [1303724.119197] e1000e: eth0 NIC Link is Down [1303726.940312] init: nmbd main process (24771) killed by TERM signal [1303727.044395] init: scsi_plugin_server main process (23022) killed by TERM signal [1303851.233049] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [1303852.742623] init: nmbd main process (24877) killed by TERM signal [1303854.173439] init: nmbd main process (25714) killed by TERM signal [1303854.305085] init: scsi_plugin_server main process (24816) killed by TERM signal [1303858.099809] init: iscsi_pluginengined main process (25758) terminated with status 255 [1303861.468517] init: scsi_plugin_server main process (25779) killed by TERM signal [1303863.109868] init: iscsi_pluginserverd main process (25764) killed by KILL signal [1303863.198827] init: scsi_plugin_server main process (26880) killed by TERM signal

Output of `lsusb` command

|usb1 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (ehci_hcd 0000:00:1a.7) hub |__usb2 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (ehci_hcd 0000:00:1d.7) hub |2-1 f400:f400:0100 00 2.00 480MBit/s 98mA 1IF (Synology USBstation 11012565ae2559) |2-2 2109:0701:0907 00 2.10 480MBit/s 500mA 1IF (Storex WeZee-Disk 20140604010585) |2-3 0bda:8156:3100 00 2.10 480MBit/s 200mA 2IFs (Realtek USB 10/100/1G/2.5G LAN 001300E04C680052) |usb3 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1a.0) hub |__usb4 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1a.1) hub |usb5 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1a.2) hub |usb6 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1d.0) hub |__usb7 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1d.1) hub |usb8 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1d.2) hub

Output of `ifconfig -a` command

docker0 Link encap:Ethernet HWaddr 02:42:74:DE:6F:EE inet addr:172.17.0.1 Bcast:172.17.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

eth0 Link encap:Ethernet HWaddr 00:11:32:08:93:56 inet addr:192.168.1.7 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::211:32ff:fe08:9356/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:131183553 errors:0 dropped:0 overruns:0 frame:0 TX packets:186495564 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:29051413088 (27.0 GiB) TX bytes:262032494823 (244.0 GiB) Interrupt:16 memory 0xfebe0000-fec00000

lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:17400 errors:0 dropped:0 overruns:0 frame:0 TX packets:17400 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2451498 (2.3 MiB) TX bytes:2451498 (2.3 MiB)

sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

bb-qq / r8152