mrjohnpoz
commented
1 year ago Nevermind - WTF... now its showing good... I didn't do anything..
`ash-4.4# iperf3 -s
Server listening on 5201 (test #1)
Accepted connection from 192.168.10.9, port 15451
[ 5] local 192.168.10.10 port 5201 connected to 192.168.10.9 port 15452
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 205 MBytes 1.72 Gbits/sec
[ 5] 1.00-2.00 sec 207 MBytes 1.74 Gbits/sec
[ 5] 2.00-3.00 sec 204 MBytes 1.71 Gbits/sec
[ 5] 3.00-4.00 sec 211 MBytes 1.77 Gbits/sec
[ 5] 4.00-5.00 sec 205 MBytes 1.72 Gbits/sec
[ 5] 5.00-6.00 sec 205 MBytes 1.72 Gbits/sec
[ 5] 6.00-7.00 sec 207 MBytes 1.73 Gbits/sec
[ 5] 7.00-8.00 sec 208 MBytes 1.75 Gbits/sec
[ 5] 8.00-9.00 sec 207 MBytes 1.73 Gbits/sec
[ 5] 9.00-10.00 sec 209 MBytes 1.75 Gbits/sec
[ 5] 10.00-10.01 sec 2.97 MBytes 1.78 Gbits/sec
[ ID] Interval Transfer Bitrate [ 5] 0.00-10.01 sec 2.02 GBytes 1.73 Gbits/sec receiver
Server listening on 5201 (test #2)
Accepted connection from 192.168.10.9, port 15481
[ 5] local 192.168.10.10 port 5201 connected to 192.168.10.9 port 15482
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 283 MBytes 2.37 Gbits/sec
[ 5] 1.00-2.00 sec 283 MBytes 2.37 Gbits/sec
[ 5] 2.00-3.00 sec 283 MBytes 2.37 Gbits/sec
[ 5] 3.00-4.00 sec 283 MBytes 2.37 Gbits/sec
[ 5] 4.00-5.00 sec 283 MBytes 2.37 Gbits/sec
[ 5] 5.00-6.00 sec 283 MBytes 2.37 Gbits/sec
[ 5] 6.00-7.00 sec 283 MBytes 2.37 Gbits/sec
[ 5] 7.00-8.00 sec 283 MBytes 2.37 Gbits/sec
[ 5] 8.00-9.00 sec 283 MBytes 2.37 Gbits/sec
[ 5] 9.00-10.00 sec 283 MBytes 2.37 Gbits/sec
[ 5] 10.00-10.01 sec 3.05 MBytes 2.36 Gbits/sec
[ ID] Interval Transfer Bitrate [ 5] 0.00-10.01 sec 2.77 GBytes 2.37 Gbits/sec receiver '
I had restarted interfaces on both nas and pc, and was seeing the 1.7 speeds, restarted iperf server on nas, etc.. but now just went to test again and its normal to what I was getting before.. I had copied a file and that seemed like more normal speeds, so had retested iperf again...
Guess we can just delete this whole thread - doh!
So just updated from RC of 7.1.1, I know my speeds on iperf3 before were 2.3x Gbps
Now it seems only getting 1.7x Gbps, updated to lastest 2.16.3-1
This on a ds918+ using the CLUB 3D CAC-1420, nics one in my pc and one in the nas.. I run iperf3 test off and on, and copy files all the time so pretty sure was getting my speeds before. The only update was the update of the DSM software.
hmmm? What info can I provide?