search

bb-qq / r8152

Synology DSM driver for Realtek RTL8152/RTL8153/RTL8156 based adapters
GNU General Public License v2.0
1.91k stars 178 forks source link

Only USB0 at Xpenology DS918 / DSM7.0.1 #244

Closed macace2000 closed 11 months ago

macace2000 commented 1 year ago

Hello

I have tried your driver package at my xpenology baremetal system DSM7.0.1 apollolake. The mainboard has only one nic. (The original DS918 has two) After installation, the CLUB 3D CAC-1420 ist listed after Ifconfig -a command in ssh only as usb0. The internal nic is eth0

When i build a second PCI-E nic in the system this nic become eth1. When i Install now the USB-Nic, it works correct at eth2. (Three Lan Ports)

After a shutdown and removing the PCI-E Nic, the USB-Nic will become only usb0 again. I use the automated repill loader 0.4 alpha 7. Config mac1, netif num etc. makes no difference.

bb-qq commented 1 year ago

Could try this command to enable udev rules?

sudo bash /var/packages/r8152/scripts/install-udev-rules
bb-qq commented 11 months ago

I would like to close this issue since there has been no response. If you have any questions, feel free to re-open it.