search

bb-qq / r8152

Synology DSM driver for Realtek RTL8152/RTL8153/RTL8156 based adapters
GNU General Public License v2.0
2.06k stars 184 forks source link

Unable to Configure Static IP after Upgrade to DSM 7.1.1-42962 Update 1 #246

Closed TheS1R closed 1 year ago

TheS1R commented 2 years ago

After overnight update of DS718+ (apollolake) to DSM 7.1.1-42962 Update 1, I lost access to NAS via 2.5 Gbps adaptor — second DS718+ was still accessible via 2.5 Gbps adaptor. After troubleshooting, I discovered that the only difference between two NASs was one configured using static IP (not working) and other configured using DHCP (working). The same situation occurs for both 2.16.3-1 DSM7.x as well as 2.15.0-10 DSM7.x. I have seen this earlier, but it had since resolved itself.

Static IPs via DHCP reservations configured in Asus router for both. Changing static IP to DHCP in NAS resolved issue.

onkelblaubaer commented 2 years ago

I have the same problem with my DS920+ (apollolake) after updating to DSM 7.1.1-42962 Update 1. The connection via the USB adapter only worked again after I switched to DHCP. Thanks to TheS1R for the hint with the switch to DHCP. The IP address remained the same after switching to DHCP. I have the driver 2.15.0-10 DSM7.x in use.

TheS1R commented 2 years ago

@onkelblaubaer Be sure to make a DHCP reservation in your router to ensure that the IP address does not change over time.

Jasmine3352 commented 2 years ago

I have the following inputs that might help out: DSM 7.1.1-42962 Update 1 ( DS 1815, DS1515 and DS918+) I have the driver 2.15.0-10 DSM7.x in use.

After any restarting the NAS, the IP are NOT seen by the Synology Assistant. I use static IPs. I change to another IP xxx.xxx.xxx.x20 to xxx.xxx.xxx.21 , save, then change back, it works. removing / replacing the LAN cable doesn't help.

I have verified that reserving a IP in the DHCP pool does indeed work. After any restarting the NAS, the IP are now seen properly by the Synology Assistant.

gcgheinen commented 2 years ago

The same for me. After I switched to DHCP and back again, the network card works again. (DSM218+ , network adapter RTL8156B)

onkelblaubaer commented 2 years ago

@onkelblaubaer Be sure to make a DHCP reservation in your router to ensure that the IP address does not change over time.

i have reserved the ip address and assigned it to the MAC address. However, the IP address is not assigned by the DHCP server. This address is not in the range of the DHCP server.

onkelblaubaer commented 2 years ago

I have the following inputs that might help out: DSM 7.1.1-42962 Update 1 ( DS 1815, DS1515 and DS918+) I have the driver 2.15.0-10 DSM7.x in use.

After any restarting the NAS, the IP are NOT seen by the Synology Assistant. I use static IPs. I change to another IP xxx.xxx.xxx.x20 to xxx.xxx.xxx.21 , save, then change back, it works. removing / replacing the LAN cable doesn't help.

I have verified that reserving a IP in the DHCP pool does indeed work. After any restarting the NAS, the IP are now seen properly by the Synology Assistant.

I try this solution, but when i restart the NAS, i have no connection again. I switched back to DHCP. This workaround also survives a reboot.

onkelblaubaer commented 2 years ago

The same for me. After I switched to DHCP and back again, the network card works again. (DSM218+ , network adapter RTL8156B)

I tried this method as well, but after rebooting again no connection to the NAS was possible. Only switching to DHCP "survives" a reboot.

blasiusx commented 2 years ago

DS916+ and DS918+ with DSM 7.1.1 Update 1. Club 3D 2.5 GBe Adapter. Driver 2.15.0-10 and 2.16.3-1.

I have the following inputs that might help out: DSM 7.1.1-42962 Update 1 ( DS 1815, DS1515 and DS918+) I have the driver 2.15.0-10 DSM7.x in use. After any restarting the NAS, the IP are NOT seen by the Synology Assistant. I use static IPs. I change to another IP xxx.xxx.xxx.x20 to xxx.xxx.xxx.21 , save, then change back, it works. removing / replacing the LAN cable doesn't help. I have verified that reserving a IP in the DHCP pool does indeed work. After any restarting the NAS, the IP are now seen properly by the Synology Assistant.

I try this solution, but when i restart the NAS, i have no connection again. I switched back to DHCP. This workaround also survives a reboot.

I have to confirm that. Entering a static IP IN THE DISKSTATION works....But unfortunately only until the next restart of the disk station because the connection failed after the reboot again. It looks like the static IP is not stored permanently in the Diskstation. DHCP in the Diskstation works for me as the only solution, and then assign it as a fixed static IP in the router.

With both driver 2.15.0-10 and 2.16.3-1.

Jasmine3352 commented 2 years ago

I hope I haven't confused folks, I am running DSM 7.1.1-42962 Update 1 (DS620slim, DS1815+, DS1515+ and DS918+) driver 2.15.0-10. The 2.5GBE adapters IP/MAC are specified in the DCHP Server Address Reservation on my router. and this is working fine. The IPs are within the IP Address Pool (192.168.0.100 - 192.168.0.249)

mrjohnpoz commented 2 years ago

Have run into this as well.. ds918+ whenever you reboot the static set IP does not work. It shows up in the dsm that static is set. But if you look with ifconfig the IP is not on the interface.

Changing to dhcp (which fails since no dhcp on this network gives you 169.254.x.x address) then switching it back to static and cycle of the interface now works.

It is something that can live with, because its rare that the nas reboots - normally only on a dsm update. But it is annoying.

Just updated to dsm 7.1.1 update 1 the other day.

520hacker commented 2 years ago

I has been update to DSM 7.1.1-42962 Update 1 , let me show how I resovle the issue .

I did the changes and the at last the network working now

the magic is , network back !!! not sure which step is the key, any way , its working again. haha.

blasiusx commented 1 year ago

Haven't read anything from bb-qq here in the forum for a long time. I believe August 20th was since last comment...I hope he's alright.

bb-qq commented 1 year ago

Could you try this test version? https://github.com/bb-qq/r8152/releases/download/2.16.3-1/r8152-apollolake-2.16.3-2test.spk

hhessel commented 1 year ago

Could you try this test version? https://github.com/bb-qq/r8152/releases/download/2.16.3-1/r8152-apollolake-2.16.3-2test.spk

Unfortunately, in this version the same bug appears. Even though the static IP is visible in the DSM UI it's not active after the reboot and you need to switch over to DHCP and back to a static config to reenable the interface.

bb-qq commented 1 year ago

Hmm, could you paste the log saved as /var/packages/r8152/var/log/start-stop-status.log? (Logging feature was added from this version.)

blasiusx commented 1 year ago

DS918+ with DSM7.1.1 Update 1 and Club3D USB 3.2 Gen1 Type A to RJ45 2.5Gbs

The new test driver 2.16.3-2 test works fine for me. Survived several reboots, from Static IP to Dynamic IP and vice versa. After a restart, the disk station is recognized, even with a static IP. (Synology Assissant shows static IP after Reboot).

The static IP was set in the network settings of the disk station itself.

The test driver could not be installed as an update for me, I had to completely uninstall the old one (2.15.0-10), reboot and then reinstall it. Of course, via the usual installation instructions. (sudo install -m 4755 -o root -D /var/packages/r8152/target/r8152/spk_su /opt/sbin/spk_su).

I've done a few copy tests, for me at least everything looks very, very good.

Now one more driver for the Braswell chipset for the 2.nd Diskstation and I'm happy. :-)

Many thanks for the great work, "bb-qq".

hhessel commented 1 year ago

Hmm, could you paste the log saved as /var/packages/r8152/var/log/start-stop-status.log? (Logging feature was added from this version.)

Here you go. Also removed the old version but didn't reboot before installing 2.16.3-2 so this might be the difference to @blasiusx

start-stop-status.log

hhessel commented 1 year ago

Okay, removed the old version, rebooted and installed the test version. Seems to work now. Many thanks!

TheS1R commented 1 year ago

Same here -- uninstalled current version, rebooted and installed this test version. Static IP appears to be working correctly again. THANKS!

Jasmine3352 commented 1 year ago

Static IP after Upgrade to DSM 7.1.1-42962 Update 1 – verified ok on DS918+ , bounced between DCHP and static IP a few times, discovered properly.

Rich

From: bb-qq @.> Date: Saturday, October 8, 2022 at 11:05 PM To: bb-qq/r8152 @.> Cc: Jasmine3352 @.>, Comment @.> Subject: Re: [bb-qq/r8152] Unable to Configure Static IP after Upgrade to DSM 7.1.1-42962 Update 1 (Issue #246)

Could you try this test version? https://github.com/bb-qq/r8152/releases/download/2.16.3-1/r8152-apollolake-2.16.3-2test.spkhttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fbb-qq%2Fr8152%2Freleases%2Fdownload%2F2.16.3-1%2Fr8152-apollolake-2.16.3-2test.spk&data=05%7C01%7C%7Cd13e3dcf0b8b4d63dd0108daa9bc36fb%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638008923095522670%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=ISbG0CqGddEAIcG9HkMVGkymMgfLbjHahMLeicyA4A4%3D&reserved=0

— Reply to this email directly, view it on GitHubhttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fbb-qq%2Fr8152%2Fissues%2F246%23issuecomment-1272464463&data=05%7C01%7C%7Cd13e3dcf0b8b4d63dd0108daa9bc36fb%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638008923095522670%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=0laAF9abBaVMgs%2BDBvVM3J9KggKy5%2FhMGwv2B6hNgzQ%3D&reserved=0, or unsubscribehttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAT46H77ALNTXEVYIPHI4LO3WCJOBDANCNFSM6AAAAAAQTEFWNY&data=05%7C01%7C%7Cd13e3dcf0b8b4d63dd0108daa9bc36fb%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638008923095522670%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Umk4qp6FoulaYK%2Bm5JkRR5HeDZ59mVGTesfjXpgPNvo%3D&reserved=0. You are receiving this because you commented.Message ID: @.***>

Jasmine3352 commented 1 year ago

Upgrade to DSM 7.1.1-42962 Update 1 on DS620Slim apollolake NOT installing properly. Coming up saying it needs to be repaired.

From: bb-qq @.> Sent: Saturday, October 8, 2022 11:05 PM To: bb-qq/r8152 @.> Cc: Jasmine3352 @.>; Comment @.> Subject: Re: [bb-qq/r8152] Unable to Configure Static IP after Upgrade to DSM 7.1.1-42962 Update 1 (Issue #246)

Could you try this test version? https://github.com/bb-qq/r8152/releases/download/2.16.3-1/r8152-apollolake-2.16.3-2test.spkhttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fbb-qq%2Fr8152%2Freleases%2Fdownload%2F2.16.3-1%2Fr8152-apollolake-2.16.3-2test.spk&data=05%7C01%7C%7Cd13e3dcf0b8b4d63dd0108daa9bc36fb%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638008923095522670%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=ISbG0CqGddEAIcG9HkMVGkymMgfLbjHahMLeicyA4A4%3D&reserved=0

- Reply to this email directly, view it on GitHubhttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fbb-qq%2Fr8152%2Fissues%2F246%23issuecomment-1272464463&data=05%7C01%7C%7Cd13e3dcf0b8b4d63dd0108daa9bc36fb%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638008923095522670%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=0laAF9abBaVMgs%2BDBvVM3J9KggKy5%2FhMGwv2B6hNgzQ%3D&reserved=0, or unsubscribehttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAT46H77ALNTXEVYIPHI4LO3WCJOBDANCNFSM6AAAAAAQTEFWNY&data=05%7C01%7C%7Cd13e3dcf0b8b4d63dd0108daa9bc36fb%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638008923095522670%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Umk4qp6FoulaYK%2Bm5JkRR5HeDZ59mVGTesfjXpgPNvo%3D&reserved=0. You are receiving this because you commented.Message ID: @.***>

TheS1R commented 1 year ago

If installation needs to be repaired (but that doesn't work), uninstall, reboot, and install update from scratch. This will require running the "sudo install ..." command as outlined in the Releases page instructions.

onkelblaubaer commented 1 year ago

Could you try this test version? https://github.com/bb-qq/r8152/releases/download/2.16.3-1/r8152-apollolake-2.16.3-2test.spk

Hello, the update to the version r8152-geminilake-2.16.3-2test.spk on my DS920+ also gave an error. I typed "sudo install -m 4755 -o root -D /var/packages/r8152/target/r8152/spk_su /opt/sbin/spk_su" again via the console for safety. Nevertheless, the new driver could not be installed. However, version 2.16.3-2 was already displayed in the package center. I changed the config from DHCP to static and rebooted - The diskstation was reachable after that and the IP address remained static...

Good Work :-)

Conclusion: works also with error message. The driver does not need to be removed before installing the new one. (in my case ;-))

mrjohnpoz commented 1 year ago

So uninstalled my 2.16.3-1 that I had installed. Rebooted and installed the 2test version of apollolake on my ds918+ didn't even have to do the cli command.. It just installed just fine.. no errors. Saw that it even remembered my static IP.. Iperf test to the ip looked good.

I then rebooted again for good measure to see if came up all on its own with the IP.. All good, iperf good test.

Whatever you did seems to have fixed the issue - all good here, thanks so much!

Jasmine3352 commented 1 year ago

I can now verify that the 'test' is operational on my DS620slim device.

Maybe not the place to post but had a question:

Has anyone been successful using 2 adapters, or bonding of 2 adapters?

Just asking.

Rich

From: TheS1R @.> Sent: Sunday, October 9, 2022 5:12 PM To: bb-qq/r8152 @.> Cc: Jasmine3352 @.>; Comment @.> Subject: Re: [bb-qq/r8152] Unable to Configure Static IP after Upgrade to DSM 7.1.1-42962 Update 1 (Issue #246)

If installation needs to be repaired (but that doesn't work), uninstall, reboot, and install update from scratch. This will require running the "sudo install ..." command as outlined in the Releases page instructions.

- Reply to this email directly, view it on GitHubhttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fbb-qq%2Fr8152%2Fissues%2F246%23issuecomment-1272661070&data=05%7C01%7C%7C41ab0484966841876f5b08daaa540e08%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638009575229418521%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=rjU5ZWv5lYTgkedNpzU8A1NeiVG6BDUk7b7MMhLS3QQ%3D&reserved=0, or unsubscribehttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAT46H74SLUPXN5YLDN2Z4VTWCNNNDANCNFSM6AAAAAAQTEFWNY&data=05%7C01%7C%7C41ab0484966841876f5b08daaa540e08%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638009575229418521%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=BPQABILrihPG1tzDWbRIMdsv8JOUA8VlFMJlukwwkaA%3D&reserved=0. You are receiving this because you commented.Message ID: @.**@.>>

bb-qq commented 1 year ago

Thank you all. I close this issue since officially versioned drivers have been released. https://github.com/bb-qq/r8152/releases/tag/2.16.3-2