Closed Manni1000 closed 11 months ago
Also the green led is not flashing when connected
the software says that its installed. but it does not show up.
Your device seems to not be recognized correctly. Please paste the outputs of lsusb
and dmesg
.
lusb: |usb1 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (ehci_hcd 0000:00:1a.7) hub |__usb2 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (ehci_hcd 0000:00:1d.7) hub |2-1 f400:f400:0100 00 2.00 480MBit/s 480mA 1IF (Synology Diskstation 0000000000000AE6) |usb3 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1a.0) hub |__usb4 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1d.0) hub |usb5 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1d.1) hub |usb6 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1d.2) hub |__usb7 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (Linux 3.10.108 etxhci_hcd-170202 Etron xHCI Host Controller 0000:06:00.0) hub |usb8 1d6b:0003:0310 09 3.00 5000MBit/s 0mA 1IF (Linux 3.10.108 etxhci_hcd-170202 Etron xHCI Host Controller 0000:06:00.0) hub |__8-2 0bda:8156:3100 00 3.20 5000MBit/s 256mA 1IF (Realtek USB 10/100/1G/2.5G LAN 001300E04C68030E)
dsmg:
[ 0.000000] Mac4: 00c3679736b3
[ 0.000000] Serial Number: DAKSN00020
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Memory: 4020816k/4718592k available (4642k kernel code, 536668k absent, 161108k reserved, 4199k data, 824k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 2128.195 MHz processor
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.39 BogoMIPS (lpj=2128195)
[ 0.010647] pid_max: default: 32768 minimum: 301
[ 0.015308] init_memory_mapping: [mem 0xde76c000-0xde76dfff]
[ 0.020976] [mem 0xde76c000-0xde76dfff] page 4k
[ 0.021012] init_memory_mapping: [mem 0xdf345000-0xdf346fff]
[ 0.026673] [mem 0xdf345000-0xdf346fff] page 4k
[ 0.026700] init_memory_mapping: [mem 0xdf34a000-0xdf34bfff]
[ 0.032364] [mem 0xdf34a000-0xdf34bfff] page 4k
[ 0.032389] init_memory_mapping: [mem 0xdf360000-0xdf360fff]
[ 0.038056] [mem 0xdf360000-0xdf360fff] page 4k
[ 0.038081] init_memory_mapping: [mem 0xdf361000-0xdf361fff]
[ 0.043747] [mem 0xdf361000-0xdf361fff] page 4k
[ 0.043772] init_memory_mapping: [mem 0xdf363000-0xdf363fff]
[ 0.049439] [mem 0xdf363000-0xdf363fff] page 4k
[ 0.049463] init_memory_mapping: [mem 0xdf364000-0xdf376fff]
[ 0.055130] [mem 0xdf364000-0xdf376fff] page 4k
[ 0.055154] init_memory_mapping: [mem 0xdf377000-0xdf37afff]
[ 0.060822] [mem 0xdf377000-0xdf37afff] page 4k
[ 0.060850] init_memory_mapping: [mem 0xdf380000-0xdf380fff]
[ 0.066515] [mem 0xdf380000-0xdf380fff] page 4k
[ 0.066539] init_memory_mapping: [mem 0xdf392000-0xdf392fff]
[ 0.072206] [mem 0xdf392000-0xdf392fff] page 4k
[ 0.072230] init_memory_mapping: [mem 0xdf3a2000-0xdf3a3fff]
[ 0.077897] [mem 0xdf3a2000-0xdf3a3fff] page 4k
[ 0.077919] init_memory_mapping: [mem 0xdf3b1000-0xdf3b1fff]
[ 0.083580] [mem 0xdf3b1000-0xdf3b1fff] page 4k
[ 0.083601] init_memory_mapping: [mem 0xdf3b4000-0xdf3b5fff]
[ 0.089263] [mem 0xdf3b4000-0xdf3b5fff] page 4k
[ 0.089286] init_memory_mapping: [mem 0xdf3dc000-0xdf3ddfff]
[ 0.094955] [mem 0xdf3dc000-0xdf3ddfff] page 4k
[ 0.094976] init_memory_mapping: [mem 0xdf3e8000-0xdf3e8fff]
[ 0.100637] [mem 0xdf3e8000-0xdf3e8fff] page 4k
[ 0.100658] init_memory_mapping: [mem 0xdf3f2000-0xdf3f2fff]
[ 0.106320] [mem 0xdf3f2000-0xdf3f2fff] page 4k
[ 0.106347] init_memory_mapping: [mem 0xdf469000-0xdf469fff]
[ 0.112012] [mem 0xdf469000-0xdf469fff] page 4k
[ 0.112034] init_memory_mapping: [mem 0xdf46a000-0xdf46afff]
[ 0.117694] [mem 0xdf46a000-0xdf46afff] page 4k
[ 0.117716] init_memory_mapping: [mem 0xdf483000-0xdf483fff]
[ 0.123377] [mem 0xdf483000-0xdf483fff] page 4k
[ 0.123398] init_memory_mapping: [mem 0xdf6e8000-0xdf6e8fff]
[ 0.129061] [mem 0xdf6e8000-0xdf6e8fff] page 4k
[ 0.129081] init_memory_mapping: [mem 0xdf6ee000-0xdf6eefff]
[ 0.134743] [mem 0xdf6ee000-0xdf6eefff] page 4k
[ 0.146621] Security Framework initialized
[ 0.150737] AppArmor: AppArmor initialized
[ 0.154860] Mount-cache hash table entries: 256
[ 0.159706] Initializing cgroup subsys memory
[ 0.164104] Initializing cgroup subsys devices
[ 0.168558] Initializing cgroup subsys freezer
[ 0.173009] Initializing cgroup subsys blkio
[ 0.177325] Disabled fast string operations
[ 0.181519] CPU: Physical Processor ID: 0
[ 0.185534] CPU: Processor Core ID: 0
[ 0.189208] mce: CPU supports 5 MCE banks
[ 0.193235] CPU0: Thermal monitoring enabled (TM1)
[ 0.198044] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
tlb_flushall_shift: 6
[ 0.212191] Freeing SMP alternatives: 20k freed
[ 0.216740] ACPI: Core revision 20130328
[ 0.223259] ACPI: All ACPI Tables successfully acquired
[ 0.230618] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.246638] smpboot: CPU0: Intel(R) Atom(TM) CPU D2701 @ 2.13GHz (fam: 06, model: 36, stepping: 01)
[ 0.357756] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
[ 0.365770] ... version: 3
[ 0.369780] ... bit width: 40
[ 0.373879] ... generic registers: 2
[ 0.377888] ... value mask: 000000ffffffffff
[ 0.383199] ... max period: 000000007fffffff
[ 0.388509] ... fixed-purpose events: 3
[ 0.392521] ... event mask: 0000000700000003
[ 0.416843] Disabled fast string operations
[ 0.434752] Disabled fast string operations
[ 0.400914] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.453045] Disabled fast string operations
[ 0.459416] Brought up 4 CPUs
[ 0.462391] smpboot: Total of 4 processors activated (17025.56 BogoMIPS)
[ 0.469555] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.478034] devtmpfs: initialized
[ 0.481758] PM: Registering ACPI NVS region [mem 0xde73b000-0xde742fff] (32768 bytes)
[ 0.489585] PM: Registering ACPI NVS region [mem 0xde75e000-0xde75efff] (4096 bytes)
[ 0.497326] PM: Registering ACPI NVS region [mem 0xdf0b5000-0xdf0b7fff] (12288 bytes)
[ 0.505150] PM: Registering ACPI NVS region [mem 0xdf0d0000-0xdf0d0fff] (4096 bytes)
[ 0.512886] PM: Registering ACPI NVS region [mem 0xdf0d2000-0xdf0d2fff] (4096 bytes)
[ 0.520623] PM: Registering ACPI NVS region [mem 0xdf11a000-0xdf319fff] (2097152 bytes)
[ 0.528682] PM: Registering ACPI NVS region [mem 0xdf32c000-0xdf32cfff] (4096 bytes)
[ 0.536424] PM: Registering ACPI NVS region [mem 0xdf32e000-0xdf332fff] (20480 bytes)
[ 0.544247] PM: Registering ACPI NVS region [mem 0xdf334000-0xdf335fff] (8192 bytes)
[ 0.551982] PM: Registering ACPI NVS region [mem 0xdf33c000-0xdf33ffff] (16384 bytes)
[ 0.559804] PM: Registering ACPI NVS region [mem 0xdf39a000-0xdf39dfff] (16384 bytes)
[ 0.567628] PM: Registering ACPI NVS region [mem 0xdf3db000-0xdf3dbfff] (4096 bytes)
[ 0.575362] PM: Registering ACPI NVS region [mem 0xdf3f5000-0xdf3f5fff] (4096 bytes)
[ 0.583100] PM: Registering ACPI NVS region [mem 0xdf3f8000-0xdf3fffff] (32768 bytes)
[ 0.590923] PM: Registering ACPI NVS region [mem 0xdf401000-0xdf42bfff] (176128 bytes)
[ 0.598838] PM: Registering ACPI NVS region [mem 0xdf43f000-0xdf44dfff] (61440 bytes)
[ 0.608982] NET: Registered protocol family 16
[ 0.614361] ACPI: bus type PCI registered
[ 0.618581] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.627888] PCI: not using MMCONFIG
[ 0.631379] PCI: Using configuration type 1 for base access
[ 0.645211] bio: create slab nginx' uses 32-bit capabilities (legacy support in use) [ 45.568841] warning:
nginx' uses 32-bit capabilities (legacy support in use)
[ 46.392349] ata15.00: supports DRM functions and may not be fully accessible
[ 46.412394] ata15.00: supports DRM functions and may not be fully accessible
[ 46.419595] ata15.00: configured for UDMA/100
[ 46.424062] ata15: EH complete
[ 47.199258] ata16.00: configured for UDMA/100
[ 47.203664] ata16: EH complete
[ 47.798267] ata1.00: configured for UDMA/133
[ 47.802650] ata1: EH complete
[ 50.103347] FAT-fs (synoboot2): fat_set_state: set=1 process=synopkicompatsy pid=10680
[ 50.121223] FAT-fs (synoboot2): fat_set_state: set=0 process=synopkicompatsy pid=10680
[ 50.412095] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 51.411734] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(b65bbc7ab99d).
[ 51.453875] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized
[ 51.500249] iSCSI:target_core_device.c:613:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
[ 51.512178] iSCSI:target_core_configfs.c:5777:target_init_dbroot db_root: cannot open: /etc/target
[ 51.521486] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
[ 51.605250] iSCSI:target_core_file.c:152:fd_attach_hba RODSP plugin for fileio is enabled.
[ 51.613663] iSCSI:target_core_file.c:159:fd_attach_hba ODX Token Manager is enabled.
[ 51.621510] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled.
[ 51.630569] iSCSI:target_core_ep.c:795:ep_attach_hba RODSP plugin for epio is enabled.
[ 51.638508] iSCSI:target_core_ep.c:802:ep_attach_hba ODX Token Manager is enabled.
[ 51.968215] workqueue: max_active 1024 requested for vhost_scsi is out of range, clamping between 1 and 512
[ 54.340860] 8021q: 802.1Q VLAN Support v1.8
[ 54.345149] 8021q: adding VLAN 0 to HW filter on device eth1
[ 54.350968] 8021q: adding VLAN 0 to HW filter on device eth0
[ 61.109313] fuse init (API version 7.22)
[ 63.389171] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 63.467637] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 64.106847] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 64.313874] aufs 3.10.x-20141110
[ 64.369214] Bridge firewalling registered
[ 65.129523] cgroup: systemd (1) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[ 69.089512] Initializing XFRM netlink socket
[ 69.113079] Netfilter messages via NETLINK v0.30.
[ 69.401236] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 144.818386] e1000e: eth0 NIC Link is Down
[ 271.858579] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 1225.027269] perf interrupt took too long (2514 > 5000), lowering kernel.perf_event_max_sample_rate to 50000
[ 2537.506783] md: md2: current auto_remap = 0
[ 2537.511070] md: md2: flushing inflight I/O
[ 2537.520636] md: requested-resync of RAID array md2
[ 2537.525543] md: minimum guaranteed speed: 300000 KB/sec/disk.
[ 2537.531717] md: using maximum available idle IO bandwidth (but not more than 1000000 KB/sec) for requested-resync.
[ 2537.542193] md: using 128k window, over a total of 7803302208k.
[ 2537.548190] md: resuming requested-resync of md2 from checkpoint.
[ 3302.439891] perf interrupt took too long (5012 > 10000), lowering kernel.perf_event_max_sample_rate to 25000
[ 4284.857740] usb 8-2: USB disconnect, device number 2
[ 4666.604935] r8152: module verification failed: signature and/or required key missing - tainting kernel
[ 4666.615664] usbcore: registered new interface driver r8152
[ 4810.483083] e1000e: eth0 NIC Link is Down
[ 4818.240105] usb 8-2: new SuperSpeed USB device number 3 using etxhci_hcd-170202
[ 4818.269342] etxhci_hcd-170202 0000:06:00.0: WARN Event TRB for slot 1 ep 2 with no TDs queued?
[ 4818.278080] etxhci_hcd-170202 0000:06:00.0: WARN Event TRB for slot 1 ep 3 with no TDs queued?
[ 4818.286891] etxhci_hcd-170202 0000:06:00.0: WARN Event TRB for slot 1 ep 6 with no TDs queued?
[ 4819.397687] usb 8-2: reset SuperSpeed USB device number 3 using etxhci_hcd-170202
[ 4819.625698] netif_napi_add() called with weight 256 on device eth%d
[ 4819.640113] r8152 8-2:1.0 eth2: v2.16.3 (2022/07/06)
[ 4819.645580] r8152 8-2:1.0 eth2: This product is covered by one or more of the following patents:
US6,570,884, US6,115,776, and US6,327,625.
[ 4819.662134] r8152 8-2:1.0 eth2: chip rev 14 [ 4819.666605] r8152 8-2:1.0 eth2: rx_buf_sz will be overridden to 16384 [ 4858.383843] usb 8-2: USB disconnect, device number 3 [ 4863.914689] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 4864.184597] usb 2-2: reset high-speed USB device number 3 using ehci-pci [ 4864.431483] r8152 2-2:1.0 eth2: v2.16.3 (2022/07/06) [ 4864.436729] r8152 2-2:1.0 eth2: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 4864.452659] r8152 2-2:1.0 eth2: chip rev 14 [ 4864.457059] r8152 2-2:1.0 eth2: rx_buf_sz will be overridden to 16384 [ 4873.435584] usb 2-2: USB disconnect, device number 3 [ 4877.679496] usb 8-2: new SuperSpeed USB device number 4 using etxhci_hcd-170202 [ 4877.708116] etxhci_hcd-170202 0000:06:00.0: WARN Event TRB for slot 1 ep 2 with no TDs queued? [ 4877.717057] etxhci_hcd-170202 0000:06:00.0: WARN Event TRB for slot 1 ep 3 with no TDs queued? [ 4877.725940] etxhci_hcd-170202 0000:06:00.0: WARN Event TRB for slot 1 ep 6 with no TDs queued? [ 4878.837078] usb 8-2: reset SuperSpeed USB device number 4 using etxhci_hcd-170202 [ 4879.063923] r8152 8-2:1.0 eth2: v2.16.3 (2022/07/06) [ 4879.069162] r8152 8-2:1.0 eth2: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 4879.085101] r8152 8-2:1.0 eth2: chip rev 14 [ 4879.089529] r8152 8-2:1.0 eth2: rx_buf_sz will be overridden to 16384 [ 5144.593707] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [15556.045872] e1000e: eth0 NIC Link is Down [39718.701066] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [39722.168786] e1000e: eth0 NIC Link is Down [39724.547882] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [39903.398922] e1000e: eth0 NIC Link is Down [55769.289267] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
because i only have 1 lan cable the nas is conected viar the normal ethernet port. the usb adapter for ethernet is pluged in but at the moment no ethernet cable is conected to the adapter.
but only while i shh into the nas ofcorese.
can someone help me please?
Please try the latest drivers. If that does not work, please let us know if the new NIC appears in the network configuration screen.
I would like to close this issue as I have not heard back from you in a long time. If you have any questions, feel free to re-open it.
i have a DS2413+ nas and installed the newest driver version. After the shh command it looked like the installation worked on the second try like deskibed in the installation tutorial. but the nas does not show up in the network when its conected via the usb adapter. Did I do something wrong? how can i fix that? Sadly its not possible to install a older version because sinology says i cant downgrade it.