search

bb-qq / r8152

Synology DSM driver for Realtek RTL8152/RTL8153/RTL8156 based adapters
GNU General Public License v2.0
1.91k stars 178 forks source link

install 2.16.3-3 DSM7.x release to DS218 #270

Closed 11230573 closed 1 year ago

11230573 commented 1 year ago

### Description of the problem I successfully installed the Plugable USB 3.0 2.5G adapter to the DS218 (RTD1296); the DS218 recognized the adapter as 2.5G, and it reported the parameter correctly in the control panel -> network session. I can log in and browse the environment with no problem. I did a test of copying an extensive directory from my Windows desktop to the DS218 station, the throughput is 100MB+/sec, it is good, but it crashes the network afterward, I have to do a hard reset to bring it back.

Description of your products

  • the product name of your NAS model DSM 7.1.1-4296
  • the product name of the ethernet dongle Plugable E2500 USB to ethernet 2.5G adapter

Description of your environment

  • connect to a ZyXel 2.5G ethernet switch
    • RTL8156B
    • Ethernet switch: ZyXel
  • cable category (Cat.6)

Output of dmesg command

chien@ACW_DS218:~$ [ 0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc07df78000 s24472 r8192 d287 76 u61440 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.000000] pcpu-alloc: s24472 r8192 d28776 u61440 alloc=15*4096 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.000000] Detected VIPT I-cache on CPU0 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 516096 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.000000] Kernel command line: ip=off console=ttyS0,115200 root=/dev/md0 rw syno_hdd_detect=4,5 syno_hdd_enable=85,86 syno_castrated_xhc=xhci-hcd.5.auto@1 HddHotplug=2 syno_usb_vbus_gpio=23@xhci-hcd.2.auto@0,17@xhci-hcd.5.auto@0,22@xhc i-hcd.8.auto@0 syno_hw_version=DS218 hd_power_on_seq=2 ihd_num=2 netif_num=1 aud io_version=1012363 syno_fw_version=M.506 U-boot=2012.07-gcde0b30 (Oct 18 2018 - 14:09:16) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ [ 0.000000] SYNO GPIO hdd detect pin: 4 5 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.000000] SYNO GPIO hdd enable pin: 85 86 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.000000] Support HDD Hotplug. -sh: [: missing]' chien@ACW_DS218:~$ [ 0.000000] USB Vbus GPIO Control: -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.000000] Gpp#23 - Host: xhci-hcd.2.auto - Port:1 - Polarity: ACTIVE_ HIGH -sh: [: missing]' chien@ACWDS218:~$ [ 0.000000] Gpp#17 - Host: xhci-hcd.5.auto - Port:1 - Polarity: ACTIVE HIGH -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.000000] Gpp#22 - Host: xhci-hcd.8.auto - Port:1 - Polarity: ACTIVE_ HIGH -sh: [: missing]' chien@ACW_DS218:~$ [ 0.000000] Synology Hardware Version: DS218 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.000000] Internal HD num: 2 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.000000] Internal netif num: 1 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ [ 0.000000] software IO TLB: mapped [mem 0x77a00000-0x7ba00000] (64MB) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ [ 0.000000] Memory: 1646720K/2097152K available (5032K kernel code, 317K rwda ta, 1824K rodata, 256K init, 445K bss, 417664K reserved, 32768K cma-reserved) -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ [ 0.000000] Virtual kernel memory layout: -sh: [: missing ]' chien@ACW_DS218:~$ vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 G B) -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 G B maximum) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ 0xffffffbdc0000000 - 0xffffffbdc2000000 ( 32 M B actual) -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 K B) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 M B) -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 M B) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 M B) -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ .init : 0xffffffc000933000 - 0xffffffc000973000 ( 256 K B) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ .text : 0xffffffc000280000 - 0xffffffc000932b34 ( 6859 K B) -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ .data : 0xffffffc000981000 - 0xffffffc0009d04c0 ( 318 K B) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ [ 0.000000] Hierarchical RCU implementation. -sh: [: missing]' chien@ACW_DS218:~$ [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.000000] NR_IRQS:64 nr_irqs:64 0 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.000000] Architected cp15 timer(s) running at 27.00MHz (phys). -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns -sh: [: missing]' chien@ACW_DS218:~$ [ 0.000005] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 43980 46511093ns -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.000084] [RTK-TIMER0] set mode: CLOCK_EVT_MODE_SHUTDOWN -sh: [: missing]' chien@ACW_DS218:~$ [ 0.000097] [RTK-TIMER0] clocksource 0 register HZ -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.000107] clocksource: rtk_timer0_counter: mask: 0xffffffff max_cycles: 0xf fffffff, max_idle_ns: 70787423951 ns -sh: [: missing]' chien@ACW_DS218:~$ [ 0.000157] [RTK-TIMER0] set mode: CLOCK_EVT_MODE_SHUTDOWN -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.000166] [RTK-TIMER1] set mode: CLOCK_EVT_MODE_SHUTDOWN -sh: [: missing]' chien@ACW_DS218:~$ [ 0.000176] [RTK-TIMER1] clocksource 1 register HZ -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.000186] clocksource: rtk_timer1_counter: mask: 0xffffffff max_cycles: 0xf fffffff, max_idle_ns: 579169832313 ns -sh: [: missing]' chien@ACW_DS218:~$ [ 0.000484] [RTK_MEM_REMAP] initialized -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.000755] Calibrating delay loop (skipped), value calculated using timer fr equency.. 54.00 BogoMIPS (lpj=270000) -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ [ 0.000769] pid_max: default: 32768 minimum: 301 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.000922] Security Framework initialized -sh: [: missing]' chien@ACW_DS218:~$ [ 0.000946] AppArmor: AppArmor initialized -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.001015] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ [ 0.001026] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ [ 0.001768] Initializing cgroup subsys io -sh: [: missing]' chien@ACW_DS218:~$ [ 0.001787] Initializing cgroup subsys memory -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.001828] Initializing cgroup subsys devices -sh: [: missing]' chien@ACW_DS218:~$ [ 0.001841] Initializing cgroup subsys freezer -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.002203] ASID allocator initialised with 65536 entries -sh: [: missing]' chien@ACW_DS218:~$ [ 0.009478] pctrl-rtk: addr: 0x0002c00c [0x13fe8161 -> 0x135e8161], bit-diff = 0x00a00000, mask = 0x28a03012 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.009506] pctrl-rtk: addr: 0x0002e010 [0xd801e416 -> 0xd8010414], bit-diff = 0x0000e002, mask = 0x0100e0a2 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.009532] pctrl-rtk: addr: 0x0003008c [0x00001f01 -> 0x00001901], bit-diff = 0x00000600, mask = 0x000006f8 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.009556] pctrl-rtk: addr: 0x00032000 [0xbfd01001 -> 0x97d01001], bit-diff = 0x28000000, mask = 0x68000354 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.009581] pctrl-rtk: addr: 0x00034004 [0x1f840e01 -> 0x0f840e01], bit-diff = 0x10000000, mask = 0x507be1fc -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.009606] pctrl-rtk: addr: 0x00036050 [0x0000801f -> 0x0000801f], bit-diff = 0x00000000, mask = 0x00007020 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.009630] pctrl-rtk: addr: 0x00038088 [0x00001f80 -> 0x00001f80], bit-diff = 0x00000000, mask = 0x00002062 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.009685] pctrl-rtk: pctrl_ve1::POWER_OFF, ret = 0 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.009812] pctrl-rtk: pctrl_ve2::POWER_OFF, ret = 0 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.009882] pctrl-rtk: pctrl_ve3::POWER_OFF, ret = 0 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.009947] pctrl-rtk: pctrl_l4_icg_jpeg::ENABLE_HW_PM, ret = -1 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.010009] pctrl-rtk: pctrl_gpu::POWER_OFF, ret = 0 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.010097] pctrl-rtk: pctrl_gpu_core_1::POWER_OFF, ret = 0 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.010176] pctrl-rtk: pctrl_gpu_core_2::POWER_OFF, ret = 0 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.010262] pctrl-rtk: pctrl_gpu_core_3::POWER_OFF, ret = 0 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.010387] pctrl-rtk: pctrl_l4_icg_vo::ENABLE_HW_PM, ret = 0 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.010459] pctrl-rtk: pctrl_l4_icg_aio::ENABLE_HW_PM, ret = -1 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.010836] pctrl-rtk: pctrl_audio_dac::POWER_OFF, ret = 0 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.010957] pctrl-rtk: pctrl_video_dac::POWER_OFF, ret = 0 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.011026] pctrl-rtk: pctrl_mhl3_en::POWER_OFF, ret = 0 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.011082] pctrl-rtk: pctrl_l4_icg_se::ENABLE_HW_PM, ret = 0 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.011137] pctrl-rtk: pctrl_l4_icg_mipi::ENABLE_HW_PM, ret = -1 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.011267] pctrl-rtk: pctrl_mipi_aphy::POWER_OFF, ret = 0 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.011896] pctrl-rtk: pctrl_l4_icg_nand::ENABLE_HW_PM, ret = -1 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.011961] pctrl-rtk: pctrl_usb_p0_mac::POWER_ON, ret = 0 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.012023] pctrl-rtk: pctrl_usb_p0_phy::POWER_ON, ret = 0 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.012194] pctrl-rtk: pctrl_usb_p3_mac_A: rev not match -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.012241] pctrl-rtk: pctrl_usb_p3_mac::POWER_ON, ret = 0 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.012297] pctrl-rtk: pctrl_usb_p3_phy::POWER_ON, ret = 0 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.012548] pctrl-rtk: pctrl_cr::POWER_OFF, ret = 0 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.012669] pctrl-rtk: pctrl_sdio::POWER_OFF, ret = 0 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.013062] pctrl-rtk: pctrl_pll_ve1::POWER_OFF, ret = 0 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.014136] Detected VIPT I-cache on CPU1 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.014181] CPU1: Booted secondary processor [410fd034] -sh: [: missing]' chien@ACW_DS218:~$ [ 0.014644] Detected VIPT I-cache on CPU2 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.014674] CPU2: Booted secondary processor [410fd034] -sh: [: missing]' chien@ACW_DS218:~$ [ 0.015116] Detected VIPT I-cache on CPU3 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.015146] CPU3: Booted secondary processor [410fd034] -sh: [: missing]' chien@ACW_DS218:~$ [ 0.015209] Brought up 4 CPUs -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.015237] SMP: Total of 4 processors activated. -sh: [: missing]' chien@ACW_DS218:~$ [ 0.015246] CPU features: detected feature: 32-bit EL0 Support -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.015256] CPU: All CPU(s) started at EL2 -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ [ 0.015282] alternatives: patching kernel code -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.015932] devtmpfs: initialized -sh: [: missing]' chien@ACW_DS218:~$ [ 0.029119] clk-rtk: scpu,pll,workaround 34055501 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.029129] clk-rtk: scpu,pll,workaround 04038500 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.034122] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.034149] futex hash table entries: 1024 (order: 5, 131072 bytes) -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ [ 0.035725] pinctrl core: initialized pinctrl subsystem -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.036644] NET: Registered protocol family 16 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.037891] vdso: 2 pages (1 code @ ffffffc000989000, 1 data @ ffffffc0009880 00) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ [ 0.037926] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. -sh: [: missing]' chien@ACW_DS218:~$ [ 0.038992] DMA: preallocated 1024 KiB pool for atomic allocations -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.039398] rst-control : base ffffff8000458600, offset 0x40 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.039427] ** rtk_lockapi_init 566, chip_revision = 0x00010000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.039629] [PINCTRL] driver init -sh: [: missing]' chien@ACW_DS218:~$ [ 0.042800] [PINCTRL] init done -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.091099] ACPI: Interpreter disabled. -sh: [: missing]' chien@ACW_DS218:~$ [ 0.091192] [RTD129x_PM] Initial RTD129x Power Management Driver. -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.091743] [RTD129x_PM] wakeup-gpio Cnt: en(1) act(1) list(1) -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ [ 0.091796] [RTD129x_PM] wakeup-gpio[0] Successful registration! (en:1 act:0 gpio:124) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ [ 0.091808] [RTD129x_PM] gpio-output-change Cnt: en(0) act(0) list(-2) -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ [ 0.091816] [RTD129x_PM] Set suspend-mode = ram -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.091824] [RTD129x_PM] Wakeup Flags Set Default : 0x2d -sh: [: missing]' chien@ACW_DS218:~$ [ 0.092320] SCSI subsystem initialized -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.092517] libata version 3.00 loaded. -sh: [: missing]' chien@ACW_DS218:~$ [ 0.092649] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ENTER rtk_u sb_power_manager_probe -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.092768] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_dwc3_dr d status is okay -sh: [: missing]' chien@ACW_DS218:~$ [ 0.092780] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_dwc3_u2 host status is okay -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.092791] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ehci status is okay -sh: [: missing]' chien@ACW_DS218:~$ [ 0.092803] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ohci status is okay -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.092813] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_dwc3_u3 host status is okay -sh: [: missing]' chien@ACW_DS218:~$ [ 0.092839] rtk-usb-power-manager 98000000.rtk_usb_power_manager: set usb_pow er_domain/p3 on -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.098920] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_pow er_manager_probe OK (take 0 ms) -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ [ 0.101382] clocksource: Switched to clocksource arch_sys_counter -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.101935] AppArmor: AppArmor Filesystem Enabled -sh: [: missing]' chien@ACW_DS218:~$ [ 0.102019] pnp: PnP ACPI: disabled -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.102173] drivers/soc/realtek/rtd129x/rtk_ion_of.c rtk_ion_probe -sh: [: missing]' chien@ACW_DS218:~$ [ 0.102199] drivers/soc/realtek/rtd129x/rtk_ion_of.c rtk_ion_probe nr_heaps:5 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.105085] rtk_ion_probe: adding heap Audio of type 8 with 2600000@600000 (t ype:GEN_POOL) -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ [ 0.222438] rtk_ion_probe: adding heap Media of type 7 with 7e000000@2000000 (type:CMA_POOL) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ [ 0.222450] rtk_ion_probe: adding heap Media of type 7 with 11000000@8c00000 (type:GEN_POOL) -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ [ 0.222460] rtk_ion_probe: adding heap Media of type 7 with 2c00000@8c00000 ( type:GEN_POOL) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ [ 0.224172] NET: Registered protocol family 2 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.224883] TCP established hash table entries: 16384 (order: 5, 131072 bytes ) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ [ 0.225094] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ [ 0.225465] TCP: Hash tables configured (established 16384 bind 16384) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ [ 0.225529] UDP hash table entries: 1024 (order: 3, 32768 bytes) -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ [ 0.225608] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ [ 0.225858] NET: Registered protocol family 1 -sh: [: missing]' chien@ACW_DS218:~$ [ 0.225907] PCI: CLS 0 bytes, default 128 -sh: [: missing ]' chien@ACW_DS218:~$ [ 0.226133] Trying to unpack rootfs image as initramfs... -sh: [: missing]' chien@ACW_DS218:~$ [ 3.816784] Freeing initrd memory: 4092K -sh: [: missing ]' chien@ACW_DS218:~$ [ 3.817456] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters av ailable -sh: [: missing]' chien@ACW_DS218:~$ [ 3.820281] audit: initializing netlink subsys (disabled) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ [ 3.820364] audit: type=2000 audit(3.809:1): initialized -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ [ 3.820928] Initialise system trusted keyring -sh: [: missing ]' chien@ACW_DS218:~$ [ 3.832931] VFS: Disk quotas dquot_6.6.0 -sh: [: missing]' chien@ACW_DS218:~$ [ 3.833016] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ [ 3.865696] Key type asymmetric registered -sh: [: missing]' chien@ACW_DS218:~$ [ 3.865718] Asymmetric key parser 'x509' registered -sh: [: missing ]' riving to L (level 9) [ 5.698940] ahci_rtk 9803f000.sata: masking port_map 0x3 -> 0x3 [ 5.705097] ahci_rtk 9803f000.sata: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x 3 impl platchien@ACW_DS218:~$ [ 3.865856] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 53) -sh: syntax error near unexpected token(' chien@ACW_DS218:~$ [ 3.865875] io scheduler noop registered -sh: [: missing ]' chien@ACW_DS218:~$ [ 3.865888] io scheduler deadline registered -sh: [: missing]' chien@ACW_DS218:~$ [ 3.865923] io scheduler cfq registered (default) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ [ 3.866878] corectrl: CPU List = [ 1-3 ] -sh: [: too many arguments chien@ACW_DS218:~$ [ 3.867232] [SB2 DBG][sb2_dbg_init] memory monitor 0x98013b00 - 0x98013c00 -sh: [: missing]' chien@ACW_DS218:~$ [ 3.867243] [SB2 DBG][sb2_dbg_init] initialized -sh: [: missing ]' chien@ACW_DS218:~$ [ 3.867482] rpc is not paused & suspended [1] 22032 -sh: [: missing]' -sh: suspended: command not found [1]+ Done(2) [ 3.867482] rpc is not paused chien@ACW_DS218:~$ [ 3.875007] rpc_int_base:ffffff8000016104 irq:18 -sh: [: missing ]' chien@ACW_DS218:~$ [ 3.875193] [PUWRAP] begin pu_init -sh: [: missing]' chien@ACW_DS218:~$ [ 3.875203] [PUWRAP] end pu_init result=0x0 -sh: [: missing ]' chien@ACW_DS218:~$ [ 3.875462] [PUWRAP] pu_probe -sh: [: missing]' chien@ACW_DS218:~$ [ 3.875518] [PUWRAP] success to probe pu wrapper device with USE_ION_ALLOCATO R -sh: [: missing ]' chien@ACW_DS218:~$ [ 3.876112] [VPUDRV] : get clock controller s_vpu_clk_ve1=0xffffffc07747fd80 -sh: [: missing]' chien@ACW_DS218:~$ [ 3.876133] [VPUDRV] : get clock controller s_vpu_clk_ve2=0xffffffc076c3ba80 -sh: [: missing ]' chien@ACW_DS218:~$ [ 3.876555] VE3: ve3_probe -sh: [: missing]' chien@ACW_DS218:~$ [ 3.876599] VE3 : base address get from DTB physical base addr=0x98048000, vi rtual base=0xffffff80004b8000, size=0x4000(actually=0x424) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ [ 3.876902] VE3: get clock controller s_ve3_clk=0xffffffc072c28d80 -sh: [: missing]' chien@ACW_DS218:~$ [ 3.876920] ve3_pctrl_on -sh: [: missing ]' chien@ACW_DS218:~$ [ 3.891443] Get cti: 0x12 -sh: [: missing]' chien@ACW_DS218:~$ [ 3.891458] VE3: dec kernel module. -sh: [: missing ]' chien@ACW_DS218:~$ [ 3.891466] VE3: Init single core at 0x 98048000 IRQ=23 -sh: [: missing]' chien@ACW_DS218:~$ [ 3.891474] VE3: core[0] has HEVC ] pctrl-rtk: pctrl_l4_icg_nat_wrap::ENABLE_HW_PM, ret = -1 [ 20.189589] pctrl-rtk: rtk_powerctrl_manager: done [ 20.821401] ata1: SATA lin-sh: [: missing ]' chien@ACW_DS218:~$ [ 3.891481] VE3: core[0] has VP9 -sh: [: missing]' chien@ACW_DS218:~$ [ 3.891487] VE3: core[0] has PP -sh: [: missing ]' chien@ACW_DS218:~$ [ 3.891650] VE3: module inserted. Major = 0 -sh: [: missing]' chien@ACW_DS218:~$ [ 3.891668] ve3_pctrl_off -sh: [: missing ]' chien@ACW_DS218:~$ [ 3.891782] memalloc: Linear Memory Allocator -sh: [: missing]' chien@ACW_DS218:~$ [ 3.892462] jpu_probe -sh: [: missing ]' chien@ACW_DS218:~$ [ 3.892514] [JPUDRV] : jpu base address get from DTB physical base addr=0x980 3e000, virtual base=0xffffff800048a000, size=0x1000 -sh: [: missing]' chien@ACW_DS218:~$ [ 3.892762] [JPUDRV] : get clock controller s_jpu_clk=0xffffffc071e8c600 -sh: [: missing ]' chien@ACW_DS218:~$ [ 3.892841] s_jpu_irq:20 want to register jpu_irq_handler -sh: [: missing]' chien@ACW_DS218:~$ [ 3.892891] [JPUDRV] success to probe jpu device with non reserved video memo ry -sh: [: missing ]' chien@ACW_DS218:~$ [ 3.892958] jpu_init -sh: [: missing]' chien@ACW_DS218:~$ [ 3.892966] end jpu_init result=0x0 -sh: [: missing ]' chien@ACW_DS218:~$ [ 3.893227] misc rtk_lockapi: registered. -sh: [: missing]' chien@ACW_DS218:~$ [ 3.994476] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled -sh: [: missing ]' chien@ACW_DS218:~$ [ 3.996733] ####1 p->uartclk:27000000 -sh: [: missing]' chien@ACW_DS218:~$ [ 3.996792] ####3 p->uartclk:27000000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 3.997099] console [ttyS0] disabled -sh: [: missing]' chien@ACW_DS218:~$ [ 3.997150] 98007800.serial0: ttyS0 at MMIO 0x98007800 (irq = 194, base_baud = 1687500) is a 16550A -sh: syntax error near unexpected token `(' chien@ACW_DS218:~$ [ 4.046529] AudioIntrRead:143 can't find process for handling AudioIntrRead p rogramID:98

[ 4.046540] AudioIntrRead: program:98 version:0 procedure:1 taskID:0 sysTID:4 294967295 sysPID:4294967295 size:4 context:81bcc245 atomic [ 5.324749] console [ttyS0] enabled [ 5.328796] ####1 p->uartclk:432000000 [ 5.332717] ####3 p->uartclk:432000000 [ 5.336850] 9801b200.serial1: ttyS1 at MMIO 0x9801b200 (irq = 163, base_baud = 27000000) is a 16550A [ 5.362254] brd: module loaded [ 5.365415] Loading iSCSI transport class v2.0-870. [ 5.483130] [SATA] spread-spectrum disable [ 5.529354] [SATA] set tx-driving to L (level 9) [ 5.635790] [SATA] spread-spectrum disable [ 5.682008] [SATA] set tx-driving to L (level 9) [ 5.698940] ahci_rtk 9803f000.sata: masking port_map 0x3 -> 0x3 [ 5.705097] ahci_rtk 9803f000.sata: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x 3 impl platform mode [ 5.714399] ahci_rtk 9803f000.sata: flags: ncq sntf pm led clo only pmp fbs p io slum part ccc sadm sds apst [ 5.724818] ahci_rtk 9803f000.sata: port 0 is not capable of FBS [ 5.731724] ahci_rtk 9803f000.sata: port 1 is not capable of FBS [ 5.739820] scsi host0: ahci_rtk [ 5.746208] scsi host1: ahci_rtk [ 5.750040] ata1: SATA max UDMA/133 mmio [mem 0x9803f000-0x9803ffff] port 0x1 00 irq 12 [ 5.758241] ata2: SATA max UDMA/133 mmio [mem 0x9803f000-0x9803ffff] port 0x1 80 irq 12 [ 14.151397] ata1: link is slow to respond, please be patient (ready=0) [ 18.951396] ata1: softreset failed (device not ready) [ 18.956574] ata1: SRST fail, set srst fail flag [ 20.071389] pctrl-rtk: rtk_powerctrl_manager: begin [ 20.076771] pctrl-rtk: pctrl_l4_icg_scpu_wrapper::ENABLE_HW_PM, ret = 0 [ 20.098600] pctrl-rtk: pctrl_l4_icg_tp::ENABLE_HW_PM, ret = -1 [ 20.114617] pctrl-rtk: pctrl_l4_icg_rsa::ENABLE_HW_PM, ret = 0 [ 20.130621] pctrl-rtk: pctrl_l4_icg_cp::ENABLE_HW_PM, ret = 0 [ 20.146544] pctrl-rtk: pctrl_l4_icg_gspi::ENABLE_HW_PM, ret = -1 [ 20.157840] pctrl-rtk: pctrl_nat::POWER_OFF, ret = 0 [ 20.167954] pctrl-rtk: pctrl_l4_icg_nat_wrap::ENABLE_HW_PM, ret = -1 [ 20.189589] pctrl-rtk: rtk_powerctrl_manager: done [ 20.821401] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 20.827738] ata1: link reset sucessfully clear error flags [ 20.955698] ata1.00: ATA-10: TOSHIBA HDWR180, 0603, max UDMA/133 [ 20.961867] ata1.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 20.969000] ata1.00: SN: 71H0A0CDFBLG _rb> [ 20.974407] ata1.00: configured for UDMA/133 [ 20.980144] scsi 0:0:0:0: Direct-Access TOSHIBA HDWR180 0603 PQ: 0 ANSI: 5 [ 20.990001] sd 0:0:0:0: [sda] 15628053168 512-byte logical blocks: (8.00 TB/7 .28 TiB) [ 20.998071] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 21.003699] sd 0:0:0:0: [sda] Write Protect is off [ 21.008625] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 10 [ 21.008832] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supp orts DPO and FUA [ 21.067304] sda: sda1 sda2 sda3 [ 21.072004] sd 0:0:0:0: [sda] Attached SCSI disk [ 29.371393] ata2: link is slow to respond, please be patient (ready=0) [ 34.171390] ata2: softreset failed (device not ready) [ 34.176568] ata2: SRST fail, set srst fail flag [ 35.681402] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 35.687739] ata2: link reset sucessfully clear error flags [ 35.868609] ata2.00: ATA-10: TOSHIBA HDWR180, 0603, max UDMA/133 [ 35.874779] ata2.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 35.881918] ata2.00: SN: 71J0A0ECFBLG [ 35.887318] ata2.00: configured for UDMA/133 [ 35.893048] scsi 1:0:0:0: Direct-Access TOSHIBA HDWR180 0603 PQ: 0 ANSI: 5 [ 35.902870] sd 1:0:0:0: [sdb] 15628053168 512-byte logical blocks: (8.00 TB/7 .28 TiB) [ 35.906283] RtkSFC MTD init ... [ 35.906286] NOR flash support list .. [ 35.906287] (X) HWSEMA support. [ 35.906289] (V) AUTO_HW_POLL support. [ 35.906290] (X) 4Bytes mode support. [ 35.906292] (X) Max erase size support. [ 35.906294] (V) Sfc_delay support. [ 35.906295] (X) Multi-read support. [ 35.907206] --RDID Seq: 0xc2 | 0x20 | 0x17 [ 35.907264] byte1=0xc2 [ 35.907321] byte2=0x16 [ 35.907323] RtkSFC MTD: MXIC MX25L6445E detected.... [ 35.907325] SFC_4KB_ERASE [ 35.907329] Supported Erase Size: 64KB 32KB 4KB. [ 35.907331] RtkSFC MTD: Enable RtkSFC MD PP callback function. [ 35.907332] MD_READ Enable.. [ 35.907334] MD_WRITE Enable.. [ 35.907389] [rtk_sfc_attach]descriptor size 0x800000 [ 35.937449] Searching for RedBoot partition table in RtkSFC at offset 0x7ff00 0 [ 35.946173] 5 RedBoot partitions found on MTD device RtkSFC [ 35.946176] Rtk SFC: using dynamic partition [ 35.946180] Creating 5 MTD partitions on "RtkSFC": [ 35.946195] 0x000000000000-0x000000100000 : "RedBoot" [ 35.952148] 0x000000100000-0x0000003f0000 : "zImage" [ 35.961035] 0x0000003f0000-0x0000007ef000 : "rd.gz" [ 35.967756] 0x0000007ef000-0x0000007ff000 : "vendor" [ 35.967928] vender Mac0 address : 00:11:32:84:08:f5 [ 35.967936] vender Mac1 doesn't set ucSum:0x00 Buf:0x00 Sum:0. -sh: [: missing ]' chien@ACW_DS218:~$ [ 35.967940] vender Mac2 doesn't set ucSum:0x00 Buf:0x00 Sum:0. [ 35.967944] vender Mac3 doesn't set ucSum:0x00 Buf:0x00 Sum:0. 0 [ 36.02025-sh: [: missing]' chien@ACW_DS218:~$ [ 35.972258] serial number='17B0QEN238100' -sh: [: missing ]' chien@ACW_DS218:~$ [ 35.972259] 0x0000007ff000-0x000000800000 : "FIS directory" -sh: [: missing]' chien@ACW_DS218:~$ [ 35.980265] Rtk SFC: (for SST/SPANSION/MXIC SPI Flash) -sh: syntax error near unexpected token (' chien@ACW_DS218:~$ [ 35.980282] Realtek SFC Driver is successfully installing. -sh: [: missing]' chien@ACW_DS218:~$ 6chien@ACW_DS218:~$ [ 35.980666] r8169 Gigabit Ethernet driver 2.32.5-LK-NAPI loaded -sh: [: missing ]' chien@ACW_DS218:~$ [ 35.992409] r8169 98016000.gmac eth0: RTL8169SOC at 0xffffff80005ac000, 00:10 :20:30:40:50, XID 10900800 IRQ 11 -sh: [: missing]' chien@ACW_DS218:~$ [ 35.992419] r8169 98016000.gmac eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.014391] rtk_rbus_init:89 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.014577] rtk_rbus_probe:27 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.015077] rtk_refclk_init:101 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.015227] rtk_refclk_probe:27 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.016079] rtk_se_probe: res.start=0x000000009800c000 res.end=0x000000009800 cfff -sh: [: missing]' chien@ACW_DS218:~$ [ 36.016086] rtk_se_probe: mem[0] phys:0x000000009800c000 virt:0xffffff80005b2 000 size:0x1000 type:1 name:SE reg space -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.016506] [Ethernet] Watch link status change. -sh: [: missing]' chien@ACW_DS218:~$ [ 36.016614] rtk_se_probe: mem[1] phys:0x000000007e117000 virt:0xffffff80005b4 000 size:0x1000 type:1 name:SE driver data -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.016760] rtk_se_probe: mem[2] phys:0x000000007e118000 virt:0xffffff80005b6 000 size:0x8000 type:1 name:SE command queue -sh: [: missing]' chien@ACW_DS218:~$ [ 36.016801] rtk_se_probe: irq=25 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.017124] Engine[0] Ctrl:00000004 Base:7e118000 ReadPtr:7e118000 WritePtr:7 e118000 Limit:7e11c000 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.017132] Engine[1] Ctrl:00000004 Base:7e11c000 ReadPtr:7e11c000 WritePtr:7 e11c000 Limit:7e120000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.017650] rtk_md_probe: res.start=0x000000009800b000 res.end=0x000000009800 bfff -sh: [: missing]' chien@ACW_DS218:~$ [ 36.017658] rtk_md_probe: mem[0] phys:0x000000009800b000 virt:0xffffff80005e4 000 size:0x1000 type:1 name:MD reg space -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.017960] rtk_md_probe: mem[1] phys:0x000000007e137000 virt:0xffffff80005e6 000 size:0x1000 type:1 name:MD driver data -sh: [: missing]' chien@ACW_DS218:~$ [ 36.018027] rtk_md_probe: mem[2] phys:0x000000007e138000 virt:0xffffff80005e8 000 size:0x4000 type:1 name:MD command queue -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.018054] rtk_md_probe: irq=24 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.018362] Engine[0] Ctrl:0000000c Base:7e138000 ReadPtr:7e138000 WritePtr:7 e138000 Limit:7e13c000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.018610] rtc_rtd129x 9801b600.rtc: rtk_rtc already enabled -sh: [: missing]' chien@ACW_DS218:~$ [ 36.019046] rtc_rtd129x 9801b600.rtc: rtc core: registered rtc as rtc0 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.019179] i2c /dev entries driver -sh: [: missing]' chien@ACW_DS218:~$ [ 36.019888] md: raid1 personality registered for level 1 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020213] cpufreq: freq_table: frequency-table,rev1: -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020218] cpufreq: 0 .volidx = 0 .freq = 300000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020221] cpufreq: 1 .volidx = 0 .freq = 400000 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020225] cpufreq: 2 .volidx = 0 .freq = 500000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020228] cpufreq: 3 .volidx = 2 .freq = 600000 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020231] cpufreq: 4 .volidx = 3 .freq = 700000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020234] cpufreq: 5 .volidx = 4 .freq = 800000 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020237] cpufreq: 6 .volidx = 5 .freq = 900000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020241] cpufreq: 7 .volidx = 6 .freq = 1000000 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020244] cpufreq: 8 .volidx = 8 .freq = 1100000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020247] cpufreq: 9 .volidx = 10 .freq = 1200000 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020250] cpufreq: 10 .volidx = 12 .freq = 1300000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020254] cpufreq: 11 .volidx = 13 .freq = 1400000 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020258] cpufreq: volt_table: voltage-table: -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020263] cpufreq: 0 .vdd_min = 800000 .vdd_max = 800000 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020266] cpufreq: 1 .vdd_min = 812500 .vdd_max = 812500 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020269] cpufreq: 2 .vdd_min = 825000 .vdd_max = 825000 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020273] cpufreq: 3 .vdd_min = 850000 .vdd_max = 850000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020276] cpufreq: 4 .vdd_min = 875000 .vdd_max = 875000 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020280] cpufreq: 5 .vdd_min = 900000 .vdd_max = 900000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020283] cpufreq: 6 .vdd_min = 925000 .vdd_max = 925000 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020286] cpufreq: 7 .vdd_min = 950000 .vdd_max = 950000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020290] cpufreq: 8 .vdd_min = 962500 .vdd_max = 962500 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020293] cpufreq: 9 .vdd_min = 975000 .vdd_max = 975000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020297] cpufreq: 10 .vdd_min = 1012500 .vdd_max = 1012500 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020300] cpufreq: 11 .vdd_min = 1025000 .vdd_max = 1025000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020304] cpufreq: 12 .vdd_min = 1062500 .vdd_max = 1062500 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020307] cpufreq: 13 .vdd_min = 1100000 .vdd_max = 1100000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020311] cpufreq: volt_table: l2-voltage-table: -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020315] cpufreq: 0 .vdd_min = 900000 .vdd_max = 900000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020318] cpufreq: 1 .vdd_min = 900000 .vdd_max = 900000 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020321] cpufreq: 2 .vdd_min = 900000 .vdd_max = 900000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020325] cpufreq: 3 .vdd_min = 900000 .vdd_max = 900000 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020328] cpufreq: 4 .vdd_min = 900000 .vdd_max = 900000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020332] cpufreq: 5 .vdd_min = 900000 .vdd_max = 900000 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020335] cpufreq: 6 .vdd_min = 900000 .vdd_max = 900000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020338] cpufreq: 7 .vdd_min = 900000 .vdd_max = 900000 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020342] cpufreq: 8 .vdd_min = 900000 .vdd_max = 900000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020345] cpufreq: 9 .vdd_min = 900000 .vdd_max = 900000 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020349] cpufreq: 10 .vdd_min = 950000 .vdd_max = 950000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020352] cpufreq: 11 .vdd_min = 950000 .vdd_max = 950000 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.020355] cpufreq: 12 .vdd_min = 1000000 .vdd_max = 1000000 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.020359] cpufreq: 13 .vdd_min = 1000000 .vdd_max = 1000000 -sh: [: missing]' chien@ACW_DS218:~$ [ 36.108072] NET: Registered protocol family 17 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.108121] Key type dns_resolver registered -sh: [: missing]' chien@ACW_DS218:~$ [ 36.108777] registered taskstats version 1 -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.108783] Loading compiled-in untrusted X.509 certificates -sh: [: missing]' chien@ACW_DS218:~$ [ 36.108787] Loading compiled-in X.509 certificates -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.108836] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0 d6bcd31651c22ce3978bdc8c8bdc417329' -sh: [: missing]' chien@ACW_DS218:~$ [ 36.111101] Loaded X.509 cert 'Synology Root Certification Authority: f2c0753 61f168425f8b5ef31b796406c3aab2089' -sh: [: missing ]' chien@ACW_DS218:~$ [ 36.111138] Loaded X.509 cert 'Synology Kernel Module Signing Certification A uthority: 600839b5d127e0e11d817a31f0575d323a7c0e28' -sh: [: missing]'

                                                                  f

(truncated because of file size limit)

(paste output here)

Output of ifconfig -a command

~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:11:32:84:08:F5 inet addr:192.168.50.2 Bcast:192.168.50.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:11

eth1 Link encap:Ethernet HWaddr 8C:AE:4C:DD:6F:18 inet addr:192.168.50.2 Bcast:192.168.50.255 Mask:255.255.255.0 inet6 addr: fdfa:4e87:aaca:4781:8eae:4cff:fedd:6f18/64 Scope:Global inet6 addr: fe80::8eae:4cff:fedd:6f18/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:54599 errors:0 dropped:0 overruns:0 frame:0 TX packets:77883 errors:24 dropped:11 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:12375429 (11.8 MiB) TX bytes:52521313 (50.0 MiB)

lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:5211 errors:0 dropped:0 overruns:0 frame:0 TX packets:5211 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:772471 (754.3 KiB) TX bytes:772471 (754.3 KiB)

tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:2 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:80 (80.0 B)

(paste output here)
bb-qq commented 1 year ago

I decided to merge topics on rtd1296 into issue #275. If you notice anything new, please comment there.