search

bb-qq / r8152

Synology DSM driver for Realtek RTL8152/RTL8153/RTL8156 based adapters
GNU General Public License v2.0
2.15k stars 188 forks source link

DS220J, dropped offline when copying big files... #302

Closed marvinclick closed 1 year ago

marvinclick commented 1 year ago

Description of the problem

i had similar issue as others, NAS just dropped when copying big files (likely over hundreds MB). have to reboot NAS to get back online. small files, or simply operate the DSM platforms relatively okay (but response is slow, guess the connection is poor)

Description of your products

  • the product name of your NAS model
    • DS 220J, (Realtek RTD1296)
    • DSM version 7.1
    • tried several general USB 2.5G adapter, all used 8156b chip.

Description of your environment

  • connect directly to a PC or using a Ethernet switch
    • PC: MIS TITAN GT, 8RG. 10MGibt LAN.
    • Ethernet switch: SEEKER SKS1200-8GPY1XF, 2.5gx8 ports
    • cable category (Cat.6e & Cat.7 )

Output of dmesg command

root@SYNONAS-MARVIN:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.180+ (root@build8) (gcc version 8.5.0 (GCC) ) #42962 SMP Sat Apr 8 00:12:20 CST 2023 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] cma: Reserved 32 MiB at 0x000000001e000000 [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] DMA zone: 2048 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 131072 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv0.1 detected in firmware. [ 0.000000] psci: Conflicting PSCI version detected. [ 0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc01df81000 s24472 r8192 d28776 u61440 [ 0.000000] pcpu-alloc: s24472 r8192 d28776 u61440 alloc=15*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129024 [ 0.000000] Kernel command line: ip=off console=ttyS0,115200 root=/dev/md0 rw syno_hdd_detect=4,5 syno_hdd_enable=85,86 syno_spinup_group=1,1 syno_spinup_group_delay=5 syno_usb_vbus_gpio=23@xhci-hcd.2.auto@0,22@xhci-hcd.5.auto@0 syno_hw_version=DS220j hd_power_on_seq=2 ihd_num=2 netif_num=1 swiotlb=1 audio_version=1012363 syno_fw_version=M.811 U-boot=2012.07-g9f8956c (Oct 31 2019 - 18:42:13) [ 0.000000] SYNO GPIO hdd detect pin: 4 5 [ 0.000000] SYNO GPIO hdd enable pin: 85 86 [ 0.000000] SYNO Spinup Group 0: 1 [ 0.000000] SYNO Spinup Group 1: 1 [ 0.000000] SYNO Spinup Group Delay: 5 [ 0.000000] USB Vbus GPIO Control: [ 0.000000] Gpp#23 - Host: xhci-hcd.2.auto - Port:1 - Polarity: ACTIVE_HIGH [ 0.000000] Gpp#22 - Host: xhci-hcd.5.auto - Port:1 - Polarity: ACTIVE_HIGH [ 0.000000] Synology Hardware Version: DS220j [ 0.000000] Internal HD num: 2 [ 0.000000] Internal netif num: 1 [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] software IO TLB: mapped [mem 0x1de7d000-0x1debd000] (0MB) [ 0.000000] Memory: 459144K/524288K available (5032K kernel code, 317K rwdata, 1824K rodata, 256K init, 445K bss, 32376K reserved, 32768K cma-reserved) [ 0.000000] Virtual kernel memory layout: vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB) vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) 0xffffffbdc0000000 - 0xffffffbdc0800000 ( 8 MB actual) fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB) PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB) modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB) .init : 0xffffffc000933000 - 0xffffffc000973000 ( 256 KB) .text : 0xffffffc000280000 - 0xffffffc000932b34 ( 6859 KB) .data : 0xffffffc000981000 - 0xffffffc0009d04c0 ( 318 KB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] Architected cp15 timer(s) running at 27.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns [ 0.000005] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns [ 0.000081] [RTK-TIMER0] set mode: CLOCK_EVT_MODE_SHUTDOWN [ 0.000093] [RTK-TIMER0] clocksource 0 register HZ [ 0.000103] clocksource: rtk_timer0_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 70787423951 ns [ 0.000154] [RTK-TIMER0] set mode: CLOCK_EVT_MODE_SHUTDOWN [ 0.000163] [RTK-TIMER1] set mode: CLOCK_EVT_MODE_SHUTDOWN [ 0.000173] [RTK-TIMER1] clocksource 1 register HZ [ 0.000182] clocksource: rtk_timer1_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 579169832313 ns [ 0.000477] [RTK_MEM_REMAP] initialized [ 0.000747] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=270000) [ 0.000760] pid_max: default: 32768 minimum: 301 [ 0.000915] Security Framework initialized [ 0.000940] AppArmor: AppArmor initialized [ 0.001010] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.001021] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.001736] Initializing cgroup subsys io [ 0.001753] Initializing cgroup subsys memory [ 0.001794] Initializing cgroup subsys devices [ 0.001808] Initializing cgroup subsys freezer [ 0.002167] ASID allocator initialised with 65536 entries [ 0.009450] pctrl-rtk: addr: 0x0002c00c [0x13fe8161 -> 0x135e8161], bit-diff = 0x00a00000, mask = 0x28a03012 [ 0.009478] pctrl-rtk: addr: 0x0002e010 [0x5801e416 -> 0x58010414], bit-diff = 0x0000e002, mask = 0x0100e0a2 [ 0.009504] pctrl-rtk: addr: 0x0003008c [0x00001f01 -> 0x00001901], bit-diff = 0x00000600, mask = 0x000006f8 [ 0.009528] pctrl-rtk: addr: 0x00032000 [0xbfd01001 -> 0x97d01001], bit-diff = 0x28000000, mask = 0x68000354 [ 0.009553] pctrl-rtk: addr: 0x00034004 [0x1f840e01 -> 0x0f840e01], bit-diff = 0x10000000, mask = 0x507be1fc [ 0.009577] pctrl-rtk: addr: 0x00036050 [0x0000801f -> 0x0000801f], bit-diff = 0x00000000, mask = 0x00007020 [ 0.009601] pctrl-rtk: addr: 0x00038088 [0x00001f80 -> 0x00001f80], bit-diff = 0x00000000, mask = 0x00002062 [ 0.009655] pctrl-rtk: pctrl_ve1::POWER_OFF, ret = 0 [ 0.009779] pctrl-rtk: pctrl_ve2::POWER_OFF, ret = 0 [ 0.009851] pctrl-rtk: pctrl_ve3::POWER_OFF, ret = 0 [ 0.009915] pctrl-rtk: pctrl_l4_icg_jpeg::ENABLE_HW_PM, ret = -1 [ 0.009978] pctrl-rtk: pctrl_gpu::POWER_OFF, ret = 0 [ 0.010066] pctrl-rtk: pctrl_gpu_core_1::POWER_OFF, ret = 0 [ 0.010145] pctrl-rtk: pctrl_gpu_core_2::POWER_OFF, ret = 0 [ 0.010231] pctrl-rtk: pctrl_gpu_core_3::POWER_OFF, ret = 0 [ 0.010356] pctrl-rtk: pctrl_l4_icg_vo::ENABLE_HW_PM, ret = 0 [ 0.010428] pctrl-rtk: pctrl_l4_icg_aio::ENABLE_HW_PM, ret = -1 [ 0.010803] pctrl-rtk: pctrl_audio_dac::POWER_OFF, ret = 0 [ 0.010922] pctrl-rtk: pctrl_video_dac::POWER_OFF, ret = 0 [ 0.010990] pctrl-rtk: pctrl_mhl3_en::POWER_OFF, ret = 0 [ 0.011045] pctrl-rtk: pctrl_l4_icg_se::ENABLE_HW_PM, ret = 0 [ 0.011099] pctrl-rtk: pctrl_l4_icg_mipi::ENABLE_HW_PM, ret = -1 [ 0.011229] pctrl-rtk: pctrl_mipi_aphy::POWER_OFF, ret = 0 [ 0.011854] pctrl-rtk: pctrl_l4_icg_nand::ENABLE_HW_PM, ret = -1 [ 0.011919] pctrl-rtk: pctrl_usb_p0_mac::POWER_ON, ret = 0 [ 0.011982] pctrl-rtk: pctrl_usb_p0_phy::POWER_ON, ret = 0 [ 0.012154] pctrl-rtk: pctrl_usb_p3_mac_A: rev not match [ 0.012200] pctrl-rtk: pctrl_usb_p3_mac::POWER_ON, ret = 0 [ 0.012255] pctrl-rtk: pctrl_usb_p3_phy::POWER_ON, ret = 0 [ 0.012507] pctrl-rtk: pctrl_cr::POWER_OFF, ret = 0 [ 0.012627] pctrl-rtk: pctrl_sdio::POWER_OFF, ret = 0 [ 0.013022] pctrl-rtk: pctrl_pll_ve1::POWER_OFF, ret = 0 [ 0.014119] Detected VIPT I-cache on CPU1 [ 0.014162] CPU1: Booted secondary processor [410fd034] [ 0.014636] Detected VIPT I-cache on CPU2 [ 0.014666] CPU2: Booted secondary processor [410fd034] [ 0.015116] Detected VIPT I-cache on CPU3 [ 0.015147] CPU3: Booted secondary processor [410fd034] [ 0.015208] Brought up 4 CPUs [ 0.015237] SMP: Total of 4 processors activated. [ 0.015246] CPU features: detected feature: 32-bit EL0 Support [ 0.015256] CPU: All CPU(s) started at EL2 [ 0.015281] alternatives: patching kernel code [ 0.015931] devtmpfs: initialized [ 0.029067] clk-rtk: scpu,pll,workaround 34055501 [ 0.029077] clk-rtk: scpu,pll,workaround 04038500 [ 0.034070] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.034097] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.035668] pinctrl core: initialized pinctrl subsystem [ 0.036604] NET: Registered protocol family 16 [ 0.037942] vdso: 2 pages (1 code @ ffffffc000989000, 1 data @ ffffffc000988000) [ 0.037981] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.039226] DMA: preallocated 1024 KiB pool for atomic allocations [ 0.039626] rst-control : base ffffff8000458600, offset 0x40 [ 0.039655] ** rtk_lockapi_init 566, chip_revision = 0x00010000 [ 0.039902] [PINCTRL] driver init [ 0.043016] [PINCTRL] init done [ 0.081118] ACPI: Interpreter disabled. [ 0.081215] [RTD129x_PM] Initial RTD129x Power Management Driver. [ 0.081750] [RTD129x_PM] wakeup-gpio Cnt: en(1) act(1) list(1) [ 0.081802] [RTD129x_PM] wakeup-gpio[0] Successful registration! (en:1 act:0 gpio:124) [ 0.081813] [RTD129x_PM] gpio-output-change Cnt: en(0) act(0) list(-2) [ 0.081821] [RTD129x_PM] Set suspend-mode = ram [ 0.081829] [RTD129x_PM] Wakeup Flags Set Default : 0x2d [ 0.082358] SCSI subsystem initialized [ 0.082573] libata version 3.00 loaded. [ 0.082702] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ENTER rtk_usb_power_manager_probe [ 0.082821] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_dwc3_drd status is okay [ 0.082835] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ehci status is okay [ 0.082847] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ohci status is okay [ 0.082857] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_dwc3_u3host status is okay [ 0.082882] rtk-usb-power-manager 98000000.rtk_usb_power_manager: set usb_power_domain/p3 on [ 0.089178] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_power_manager_probe OK (take 0 ms) [ 0.091675] clocksource: Switched to clocksource arch_sys_counter [ 0.092231] AppArmor: AppArmor Filesystem Enabled [ 0.092315] pnp: PnP ACPI: disabled [ 0.094121] NET: Registered protocol family 2 [ 0.094793] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.094858] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 0.094957] TCP: Hash tables configured (established 4096 bind 4096) [ 0.095013] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.095041] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.095260] NET: Registered protocol family 1 [ 0.095309] PCI: CLS 0 bytes, default 128 [ 0.095515] Trying to unpack rootfs image as initramfs... [ 3.698985] Freeing initrd memory: 4252K [ 3.699656] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 3.702607] audit: initializing netlink subsys (disabled) [ 3.702716] audit: type=2000 audit(3.699:1): initialized [ 3.703284] Initialise system trusted keyring [ 3.712263] VFS: Disk quotas dquot_6.6.0 [ 3.712349] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.755208] Key type asymmetric registered [ 3.755229] Asymmetric key parser 'x509' registered [ 3.755350] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.755369] io scheduler noop registered [ 3.755382] io scheduler deadline registered [ 3.755431] io scheduler cfq registered (default) [ 3.756391] corectrl: CPU List = [ 1-3 ] [ 3.756745] [SB2 DBG][sb2_dbg_init] memory monitor 0x98013b00 - 0x98013c00 [ 3.756757] [SB2 DBG][sb2_dbg_init] initialized [ 3.757007] rpc is not paused & suspended [ 3.763020] rpc_int_base:ffffff80044be104 irq:18 [ 3.763202] [PUWRAP] begin pu_init [ 3.763213] [PUWRAP] end pu_init result=0x0 [ 3.763799] memalloc: Linear Memory Allocator [ 3.764400] jpu_init [ 3.764412] end jpu_init result=0x0 [ 3.764680] misc rtk_lockapi: registered. [ 3.876739] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.878739] ####1 p->uartclk:27000000 [ 3.878795] ####3 p->uartclk:27000000 [ 3.879105] console [ttyS0] disabled [ 3.879165] 98007800.serial0: ttyS0 at MMIO 0x98007800 (irq = 194, base_baud = 1687500) is a 16550A [ 3.920560] AudioIntrRead:143 can't find process for handling AudioIntrRead programID:98 [ 3.920570] AudioIntrRead: program:98 version:0 procedure:1 taskID:0 sysTID:4294967295 sysPID:4294967295 size:4 context:81bcc245 atomic [ 5.021627] console [ttyS0] enabled [ 5.025686] ####1 p->uartclk:432000000 [ 5.029589] ####3 p->uartclk:432000000 [ 5.033841] 9801b200.serial1: ttyS1 at MMIO 0x9801b200 (irq = 163, base_baud = 27000000) is a 16550A [ 5.059957] brd: module loaded [ 5.083844] Loading iSCSI transport class v2.0-870. [ 5.166149] [SATA] spread-spectrum disable [ 5.212369] [SATA] set tx-driving to L (level 4) [ 5.347275] [SATA] spread-spectrum disable [ 5.393489] [SATA] set tx-driving to L (level 4) [ 5.410328] ahci_rtk 9803f000.sata: masking port_map 0x3 -> 0x3 [ 5.416728] ahci_rtk 9803f000.sata: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 5.426012] ahci_rtk 9803f000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc sadm sds apst [ 5.436331] ahci_rtk 9803f000.sata: port 0 is not capable of FBS [ 5.443233] ahci_rtk 9803f000.sata: port 1 is not capable of FBS [ 5.453275] scsi host0: ahci_rtk [ 5.461786] scsi host1: ahci_rtk [ 5.465696] ata1: SATA max UDMA/133 mmio [mem 0x9803f000-0x9803ffff] port 0x100 irq 12 [ 5.473874] ata2: SATA max UDMA/133 mmio [mem 0x9803f000-0x9803ffff] port 0x180 irq 12 [ 5.482420] Delay 5 seconds to wait for disk 2 ready. [ 5.487346] RtkSFC MTD init ... [ 5.487349] NOR flash support list .. [ 5.487350] (X) HWSEMA support. [ 5.487352] (V) AUTO_HW_POLL support. [ 5.487354] (X) 4Bytes mode support. [ 5.487355] (X) Max erase size support. [ 5.487357] (V) Sfc_delay support. [ 5.487358] (X) Multi-read support. [ 5.488416] --RDID Seq: 0xc2 | 0x20 | 0x18 [ 5.488474] byte1=0xc2 [ 5.488531] byte2=0x17 [ 5.488533] RtkSFC MTD: MXIC MX25L12845E detected. [ 5.488535] SFC_4KB_ERASE [ 5.488539] Supported Erase Size: 64KB 32KB 4KB. [ 5.488541] RtkSFC MTD: Enable RtkSFC MD PP callback function. [ 5.488542] MD_READ Enable.. [ 5.488544] MD_WRITE Enable.. [ 5.488599] [rtk_sfc_attach]descriptor size 0x1000000 [ 5.517220] Searching for RedBoot partition table in RtkSFC at offset 0xfff000 [ 5.521309] 7 RedBoot partitions found on MTD device RtkSFC [ 5.521311] Rtk SFC: using dynamic partition [ 5.521315] Creating 7 MTD partitions on "RtkSFC": [ 5.521323] 0x000000000000-0x000000100000 : "RedBoot" [ 5.527131] 0x000000100000-0x000000450000 : "zImage" [ 5.569185] 0x000000450000-0x000000877000 : "rd.gz" [ 5.570431] 0x000000877000-0x000000887000 : "vendor" [ 5.570598] vender Mac0 address : 00:11:32:c9:cf:7b [ 5.570605] vender Mac1 doesn't set ucSum:0x00 Buf:0x00 Sum:0. [ 5.570609] vender Mac2 doesn't set ucSum:0x00 Buf:0x00 Sum:0. [ 5.570613] vender Mac3 doesn't set ucSum:0x00 Buf:0x00 Sum:0. [ 5.576813] serial number='2040RKRNFX103' [ 5.576813] 0x000000887000-0x000000bd7000 : "zImage_bak" [ 5.585350] 0x000000bd7000-0x000000ffe000 : "rd.gz_bak" [ 5.601934] 0x000000fff000-0x000001000000 : "FIS directory" [ 5.621181] Rtk SFC: (for SST/SPANSION/MXIC SPI Flash) [ 5.621196] Realtek SFC Driver is successfully installing.

[ 5.621576] r8169 Gigabit Ethernet driver 2.32.5-LK-NAPI loaded [ 5.642654] r8169 98016000.gmac eth0: RTL8169SOC at 0xffffff800459c000, 00:10:20:30:40:50, XID 10900800 IRQ 11 [ 5.642664] r8169 98016000.gmac eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 5.714980] rtk_rbus_init:89 [ 5.718119] rtk_rbus_probe:27 [ 5.722267] rtk_refclk_init:101 [ 5.725721] rtk_refclk_probe:27 [ 5.729167] [Ethernet] Watch link status change. [ 5.749237] rtk_md_probe: res.start=0x000000009800b000 res.end=0x000000009800bfff [ 5.756965] rtk_md_probe: mem[0] phys:0x000000009800b000 virt:0xffffff80045a4000 size:0x1000 type:1 name:MD reg space [ 5.798690] rtk_md_probe: mem[1] phys:0x000000001e117000 virt:0xffffff80045a6000 size:0x1000 type:1 name:MD driver data [ 5.815045] rtk_md_probe: mem[2] phys:0x000000001e118000 virt:0xffffff80045a8000 size:0x4000 type:1 name:MD command queue [ 5.831167] rtk_md_probe: irq=20 [ 5.838208] Engine[0] Ctrl:0000000c Base:1e118000 ReadPtr:1e118000 WritePtr:1e118000 Limit:1e11c000 [ 5.851150] rtc_rtd129x 9801b600.rtc: rtk_rtc already enabled [ 5.861749] rtc_rtd129x 9801b600.rtc: rtc core: registered rtc as rtc0 [ 5.869414] i2c /dev entries driver [ 5.874268] md: raid1 personality registered for level 1 [ 5.880125] cpufreq: freq_table: frequency-table,rev1: [ 5.885437] cpufreq: 0 .volidx = 0 .freq = 300000 [ 5.890529] cpufreq: 1 .volidx = 0 .freq = 400000 [ 5.895641] cpufreq: 2 .volidx = 0 .freq = 500000 [ 5.900731] cpufreq: 3 .volidx = 2 .freq = 600000 [ 5.905838] cpufreq: 4 .volidx = 3 .freq = 700000 [ 5.910927] cpufreq: 5 .volidx = 4 .freq = 800000 [ 5.916028] cpufreq: 6 .volidx = 5 .freq = 900000 [ 5.921116] cpufreq: 7 .volidx = 6 .freq = 1000000 [ 5.926211] cpufreq: 8 .volidx = 8 .freq = 1100000 [ 5.931298] cpufreq: 9 .volidx = 10 .freq = 1200000 [ 5.936480] cpufreq: 10 .volidx = 12 .freq = 1300000 [ 5.941655] cpufreq: 11 .volidx = 13 .freq = 1400000 [ 5.946917] cpufreq: volt_table: voltage-table: [ 5.951567] cpufreq: 0 .vdd_min = 800000 .vdd_max = 800000 [ 5.957476] cpufreq: 1 .vdd_min = 812500 .vdd_max = 812500 [ 5.963384] cpufreq: 2 .vdd_min = 825000 .vdd_max = 825000 [ 5.969271] cpufreq: 3 .vdd_min = 850000 .vdd_max = 850000 [ 5.975166] cpufreq: 4 .vdd_min = 875000 .vdd_max = 875000 [ 5.981053] cpufreq: 5 .vdd_min = 900000 .vdd_max = 900000 [ 5.986947] cpufreq: 6 .vdd_min = 925000 .vdd_max = 925000 [ 5.992841] cpufreq: 7 .vdd_min = 950000 .vdd_max = 950000 [ 5.998727] cpufreq: 8 .vdd_min = 962500 .vdd_max = 962500 [ 6.004622] cpufreq: 9 .vdd_min = 975000 .vdd_max = 975000 [ 6.010508] cpufreq: 10 .vdd_min = 1012500 .vdd_max = 1012500 [ 6.016492] cpufreq: 11 .vdd_min = 1025000 .vdd_max = 1025000 [ 6.022475] cpufreq: 12 .vdd_min = 1062500 .vdd_max = 1062500 [ 6.028450] cpufreq: 13 .vdd_min = 1100000 .vdd_max = 1100000 [ 6.034463] cpufreq: volt_table: l2-voltage-table: [ 6.039374] cpufreq: 0 .vdd_min = 900000 .vdd_max = 900000 [ 6.045272] cpufreq: 1 .vdd_min = 900000 .vdd_max = 900000 [ 6.051158] cpufreq: 2 .vdd_min = 900000 .vdd_max = 900000 [ 6.057052] cpufreq: 3 .vdd_min = 900000 .vdd_max = 900000 [ 6.062946] cpufreq: 4 .vdd_min = 900000 .vdd_max = 900000 [ 6.068833] cpufreq: 5 .vdd_min = 900000 .vdd_max = 900000 [ 6.074727] cpufreq: 6 .vdd_min = 900000 .vdd_max = 900000 [ 6.080612] cpufreq: 7 .vdd_min = 900000 .vdd_max = 900000 [ 6.086507] cpufreq: 8 .vdd_min = 900000 .vdd_max = 900000 [ 6.092401] cpufreq: 9 .vdd_min = 900000 .vdd_max = 900000 [ 6.098287] cpufreq: 10 .vdd_min = 950000 .vdd_max = 950000 [ 6.104270] cpufreq: 11 .vdd_min = 950000 .vdd_max = 950000 [ 6.110245] cpufreq: 12 .vdd_min = 1000000 .vdd_max = 1000000 [ 6.116227] cpufreq: 13 .vdd_min = 1000000 .vdd_max = 1000000 [ 6.140462] NET: Registered protocol family 17 [ 6.145074] Key type dns_resolver registered [ 6.150098] registered taskstats version 1 [ 6.154342] Loading compiled-in untrusted X.509 certificates [ 6.160143] Loading compiled-in X.509 certificates [ 6.165164] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' [ 6.177861] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' [ 6.188224] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' [ 6.200087] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' [ 6.210184] page_owner is disabled [ 6.213750] AppArmor: AppArmor sha1 policy hashing enabled [ 6.219614] scpu wrappee irq 16, scpu_wrap_addr 0xffffff80045b6000

[ 6.228378] [SCPU_WRAPPER] initialized [ 6.232221] [SCPU_WRAPPER][scpu_wrapper_init] memory monitor 0x98013b00 - 0x98013c00 [ 6.240339] rtc_rtd129x 9801b600.rtc: setting system clock to 2023-04-23 02:15:02 UTC (1682216102) [ 6.255888] thermal thermal_zone0: current temp is 46 C [ 6.261372] thermal cooling_device0: thermal-cpufreq-0 bind to TP0: 1 -> 6, ret = 0 [ 6.269266] thermal cooling_device0: thermal-cpufreq-0 bind to TP1: 7 -> 11, ret = 0 [ 6.283342] corectrl: token_owenr X -> cpufreq [ 6.290639] dcdc1: disabling [ 6.293617] dcdc2: disabling [ 6.296567] dcdc3: disabling [ 6.299517] dcdc5: disabling [ 6.302470] dcdc6: disabling [ 6.305417] ldo2: disabling [ 6.308277] ldo3: disabling [ 13.871675] ata1: link is slow to respond, please be patient (ready=0) [ 16.291680] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 16.303207] ata1.00: ATA-9: ST2000VN004-2E4164, SC60, max UDMA/133 [ 16.309536] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 16.316491] ata1.00: SN: Z529Z5AZ [ 16.321702] ata1.00: configured for UDMA/133 [ 16.326808] scsi 0:0:0:0: Direct-Access ATA ST2000VN004-2E4164 SC60 PQ: 0 ANSI: 5 [ 16.336419] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 16.344384] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 16.351010] sd 0:0:0:0: [sda] Write Protect is off [ 16.355942] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 16.356016] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 16.391216] sda: sda1 sda2 sda3 < sda5 > [ 16.396261] sd 0:0:0:0: [sda] Attached SCSI disk [ 19.091686] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 19.105529] ata2.00: ATA-9: ST2000VN004-2E4164, SC60, max UDMA/133 [ 19.111866] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 19.118815] ata2.00: SN: Z52A09MR [ 19.124037] ata2.00: configured for UDMA/133 [ 19.129128] scsi 1:0:0:0: Direct-Access ATA ST2000VN004-2E4164 SC60 PQ: 0 ANSI: 5 [ 19.138601] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 19.146585] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 19.152089] sd 1:0:0:0: [sdb] Write Protect is off [ 19.157003] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 19.157058] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 19.199117] sdb: sdb1 sdb2 sdb3 < sdb5 > [ 19.204140] sd 1:0:0:0: [sdb] Attached SCSI disk [ 19.209093] Freeing unused kernel memory: 256K [ 19.213763] Freeing alternatives memory: 40K [ 20.071676] pctrl-rtk: rtk_powerctrl_manager: begin [ 20.076919] pctrl-rtk: pctrl_l4_icg_scpu_wrapper::ENABLE_HW_PM, ret = 0 [ 20.093709] pctrl-rtk: pctrl_l4_icg_sb2::ENABLE_HW_PM, ret = 0 [ 20.104687] pctrl-rtk: pctrl_l4_icg_tp::ENABLE_HW_PM, ret = -1 [ 20.120673] pctrl-rtk: pctrl_l4_icg_rsa::ENABLE_HW_PM, ret = 0 [ 20.136663] pctrl-rtk: pctrl_l4_icg_cp::ENABLE_HW_PM, ret = 0 [ 20.152563] pctrl-rtk: pctrl_l4_icg_gspi::ENABLE_HW_PM, ret = -1 [ 20.163768] pctrl-rtk: pctrl_nat::POWER_OFF, ret = 0 [ 20.173857] pctrl-rtk: pctrl_l4_icg_nat_wrap::ENABLE_HW_PM, ret = -1 [ 20.195422] pctrl-rtk: rtk_powerctrl_manager: done [ 20.271688] random: nonblocking pool is initialized [ 20.349751] rtk-usb-phy-rle0599 98013824.usb_phy_rle0599: Probe RTK USB 2.0 RLE0599 PHY [ 20.367345] rtk-usb2phy 98028280.dwc3_drd_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Probe RTK USB 2.0 PHY [ 20.377306] rtk-usb2phy 98031280.dwc3_u2host_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Probe RTK USB 2.0 PHY [ 20.387289] rtk-usb2phy 981f8280.dwc3_u3host_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Probe RTK USB 2.0 PHY [ 20.406273] rtk-usb3phy 98013210.dwc3_drd_usb3phy: drivers/usb/phy/phy-rtk-usb3.c Probe RTK USB 3.0 PHY [ 20.416211] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: drivers/usb/phy/phy-rtk-usb3.c Probe RTK USB 3.0 PHY [ 20.445515] usbcore: registered new interface driver usbfs [ 20.451217] usbcore: registered new interface driver hub [ 20.456906] usbcore: registered new device driver usb [ 20.489384] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 20.504343] ehci-pci: EHCI PCI platform driver [ 20.556076] rtk-dwc3 98013200.rtk_dwc3_drd: Probe Realtek-SoC USB DWC3 Host Controller [ 20.564867] dwc3 98020000.dwc3_drd: rtk dwc3 fixed dwc3 globals register start address 0xffffff80066f8100 [ 20.575105] rtk-usb3phy 98013210.dwc3_drd_usb3phy: drivers/usb/phy/phy-rtk-usb3.c Init RTK USB 3.0 PHY [ 20.589851] rtk-usb3phy 98013210.dwc3_drd_usb3phy: drivers/usb/phy/phy-rtk-usb3.c Initialized RTK USB 3.0 PHY [ 20.800025] rtk-usb2phy 98028280.dwc3_drd_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Init RTK USB 2.0 PHY [ 20.809586] rtk-usb2phy 98028280.dwc3_drd_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Initialized RTK USB 2.0 PHY [ 21.119979] xhci-hcd xhci-hcd.2.auto: power control enabled [ 21.125776] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 21.131412] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 21.139655] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00010010 [ 21.148598] xhci-hcd xhci-hcd.2.auto: irq 9, io mem 0x98020000 [ 21.155038] hub 2-0:1.0: USB hub found [ 21.158916] hub 2-0:1.0: 1 port detected [ 21.163078] port1 is going to power up Vbus by GPIO#23(ACTIVE_HIGH) [ 21.269603] host xhci-hcd.2.auto port 1 has Vbus GPIO#23 with polarity ACTIVE_HIGH [ 21.277575] xhci-hcd xhci-hcd.2.auto: power control enabled [ 21.283295] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 21.288915] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 [ 21.296798] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 21.305509] hub 3-0:1.0: USB hub found [ 21.309395] hub 3-0:1.0: 1 port detected [ 21.313524] host xhci-hcd.2.auto port 1 has Vbus GPIO#23 with polarity ACTIVE_HIGH [ 21.321760] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_init_power_on for 98013200.rtk_dwc3_drd [ 21.332285] rtk-dwc3 98013200.rtk_dwc3_drd: dwc3_rtk_probe ok! (take 780 ms) [ 21.339574] rtk-dwc3 98013e00.rtk_dwc3_u3host: Probe Realtek-SoC USB DWC3 Host Controller [ 21.348416] dwc3 981f0000.dwc3_u3host: rtk dwc3 fixed dwc3 globals register start address 0xffffff8006728100 [ 21.358799] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: drivers/usb/phy/phy-rtk-usb3.c Init RTK USB 3.0 PHY [ 21.373738] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: drivers/usb/phy/phy-rtk-usb3.c Initialized RTK USB 3.0 PHY [ 21.584169] rtk-usb2phy 981f8280.dwc3_u3host_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Init RTK USB 2.0 PHY [ 21.593993] rtk-usb2phy 981f8280.dwc3_u3host_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Initialized RTK USB 2.0 PHY [ 21.904644] xhci-hcd xhci-hcd.5.auto: power control enabled [ 21.910355] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [ 21.916003] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4 [ 21.924269] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00010010 [ 21.933201] xhci-hcd xhci-hcd.5.auto: irq 9, io mem 0x981f0000 [ 21.939635] hub 4-0:1.0: USB hub found [ 21.943534] hub 4-0:1.0: 1 port detected [ 21.947668] port1 is going to power up Vbus by GPIO#22(ACTIVE_HIGH) [ 22.054213] host xhci-hcd.5.auto port 1 has Vbus GPIO#22 with polarity ACTIVE_HIGH [ 22.062197] xhci-hcd xhci-hcd.5.auto: power control enabled [ 22.067908] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [ 22.073713] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5 [ 22.081593] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 22.090306] hub 5-0:1.0: USB hub found [ 22.094209] hub 5-0:1.0: 1 port detected [ 22.098291] host xhci-hcd.5.auto port 1 has Vbus GPIO#22 with polarity ACTIVE_HIGH [ 22.106577] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_init_power_on for 98013e00.rtk_dwc3_u3host [ 22.117390] rtk-dwc3 98013e00.rtk_dwc3_u3host: dwc3_rtk_probe ok! (take 780 ms) [ 22.146390] ds220j_synobios: loading out-of-tree module taints kernel. [ 22.155993] ds220j_synobios: module license 'Synology Inc.' taints kernel. [ 22.165390] Disabling lock debugging due to kernel taint [ 22.171957] synobios open /dev/ttyS1 success [ 22.176338] Synobios DS220j GPIO initialized [ 22.180754] synobios: load, major number 201 [ 22.185158] Brand: Synology [ 22.188020] Model: DS-220j [ 22.190790] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 22.199453] synobios cpu_arch proc entry initialized [ 22.204546] synobios crypto_hw proc entry initialized [ 22.209718] synobios syno_platform proc entry initialized [ 22.225514] Module [ds220j_synobios] is removed. [ 22.230351] synobios: unload [ 22.399872] md: md0 stopped. [ 22.405078] md: bind [ 22.408265] md: bind [ 22.411488] md/raid1:md0: active with 2 out of 2 mirrors [ 22.429164] md0: detected capacity change from 0 to 2549940224 [ 22.541255] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 22.814882] EXT4-fs (md0): recovery complete [ 22.825222] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 24.288413] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 24.318732] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 24.554602] loop: module loaded [ 29.440532] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 29.472065] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 29.942739] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 29.973360] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [ 30.744471] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 30.762996] systemd[1]: Detected architecture arm64. [ 30.783112] systemd[1]: Set hostname to . [ 32.834198] systemd[1]: Cannot add dependency job for unit synoperfeventd.service, ignoring: Unit synoperfeventd.service is masked. [ 32.846988] systemd[1]: Cannot add dependency job for unit pkg-install-low-priority-builtin.service, ignoring: Unit pkg-install-low-priority-builtin.service failed to load: No such file or directory. [ 32.865226] systemd[1]: Cannot add dependency job for unit pkgctl-dsm6-ui-compatible.service, ignoring: Unit pkgctl-dsm6-ui-compatible.service failed to load: No such file or directory. [ 32.882202] systemd[1]: Cannot add dependency job for unit pkg-install-high-priority-builtin.service, ignoring: Unit pkg-install-high-priority-builtin.service failed to load: No such file or directory. [ 32.904132] systemd[1]: Reached target Timers. [ 32.911497] systemd[1]: Starting Timers. [ 32.917051] systemd[1]: Created slice Root Slice. [ 32.923301] systemd[1]: Starting Root Slice. [ 32.930461] systemd[1]: Created slice PlexMediaServer's slice. [ 32.938021] systemd[1]: Starting PlexMediaServer's slice. [ 32.946585] systemd[1]: Created slice SMBService's slice. [ 32.952625] systemd[1]: Starting SMBService's slice. [ 32.960736] systemd[1]: Created slice synobackup daemon slice. [ 32.968384] systemd[1]: Starting synobackup daemon slice. [ 32.976946] systemd[1]: Created slice Task Scheduler Group. [ 32.984766] systemd[1]: Starting Task Scheduler Group. [ 32.993059] systemd[1]: Created slice OAuthService's slice. [ 33.000607] systemd[1]: Starting OAuthService's slice. [ 33.008946] systemd[1]: Created slice SSDP service. [ 33.015759] systemd[1]: Starting SSDP service. [ 33.023338] systemd[1]: Created slice NFS. [ 33.028660] systemd[1]: Starting NFS. [ 33.035455] systemd[1]: Created slice SynoFinder's slice. [ 33.041309] systemd[1]: Starting SynoFinder's slice. [ 33.049435] systemd[1]: Created slice USBCopy's slice. [ 33.056365] systemd[1]: Starting USBCopy's slice. [ 33.064223] systemd[1]: Created slice Synology DSM Storage Service. [ 33.072047] systemd[1]: Starting Synology DSM Storage Service. [ 33.081036] systemd[1]: Created slice Synology DSM internal service. [ 33.090107] systemd[1]: Starting Synology DSM internal service. [ 33.099218] systemd[1]: Created slice DownloadStation's slice. [ 33.107821] systemd[1]: Starting DownloadStation's slice. [ 33.116314] systemd[1]: Listening on udev Control Socket. [ 33.124028] systemd[1]: Starting udev Control Socket. [ 33.132234] systemd[1]: Created slice Synology Cache Advisor. [ 33.139779] systemd[1]: Starting Synology Cache Advisor. [ 33.148258] systemd[1]: Created slice ScsiTarget's slice. [ 33.155810] systemd[1]: Starting ScsiTarget's slice. [ 33.163944] systemd[1]: Created slice QuickConnect synorelayd group. [ 33.172103] systemd[1]: Starting QuickConnect synorelayd group. [ 33.181201] systemd[1]: Created slice r8152's slice. [ 33.188931] systemd[1]: Starting r8152's slice. [ 33.196613] systemd[1]: Created slice Package Center Slice. [ 33.203534] systemd[1]: Starting Package Center Slice. [ 33.211845] systemd[1]: Created slice RAID Resync Process. Including Resync, Repair and Reshape.. [ 33.222760] systemd[1]: Starting RAID Resync Process. Including Resync, Repair and Reshape.. [ 33.234446] systemd[1]: Created slice SNMP. [ 33.241357] systemd[1]: Starting SNMP. [ 33.248247] systemd[1]: Created slice User and Session Slice. [ 33.256775] systemd[1]: Starting User and Session Slice. [ 33.265289] systemd[1]: Created slice System Slice. [ 33.272381] systemd[1]: Starting System Slice. [ 33.279781] systemd[1]: Reached target Slices. [ 33.285619] systemd[1]: Starting Slices. [ 33.292696] systemd[1]: Created slice Synology DSM desktop service. [ 33.299775] systemd[1]: Starting Synology DSM desktop service. [ 33.308798] systemd[1]: Created slice scemd. [ 33.315723] systemd[1]: Starting scemd. [ 33.322690] systemd[1]: Listening on Journal Audit Socket. [ 33.328805] systemd[1]: Starting Journal Audit Socket. [ 33.337243] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 33.345280] systemd[1]: Starting system-serial\x2dgetty.slice. [ 33.354304] systemd[1]: Created slice BTRFS Space Reclaim. [ 33.362464] systemd[1]: Starting BTRFS Space Reclaim. [ 33.370620] systemd[1]: Listening on Journal Socket. [ 33.377554] systemd[1]: Starting Journal Socket. [ 33.531809] systemd[1]: Mounting Temporary Directory... [ 33.538697] systemd[1]: Starting Link coredump path to volume if possible... [ 33.549196] systemd[1]: Starting Synology swap... [ 33.557680] systemd[1]: Starting check integrity of rd.gz decompression... [ 33.567760] systemd[1]: Starting Journal Socket (/dev/log). [ 33.574551] systemd[1]: Started Set project quota ID for /var/log. [ 33.585521] systemd[1]: Mounting Debug File System... [ 33.593568] systemd[1]: Starting unbind USB device... [ 33.601637] systemd[1]: Starting Synology Task Scheduler Init... [ 33.609861] systemd[1]: Created slice Shared Folder Sync. [ 33.618397] systemd[1]: Starting Shared Folder Sync. [ 33.626622] systemd[1]: Created slice CodecPack's slice. [ 33.634526] systemd[1]: Starting CodecPack's slice. [ 33.643994] systemd[1]: Starting Set hostname... [ 33.650074] systemd[1]: Created slice Synology Flashcache. [ 33.658191] systemd[1]: Starting Synology Flashcache. [ 33.666565] systemd[1]: Created slice Synology Swap Works. [ 33.674067] systemd[1]: Starting Synology Swap Works. [ 33.682116] systemd[1]: Reached target Swap. [ 33.688322] systemd[1]: Starting Swap. [ 33.696592] systemd[1]: Starting Set time zone information to kernel... [ 33.703645] systemd[1]: Reached target Paths. [ 33.710798] systemd[1]: Starting Paths. [ 33.717739] systemd[1]: Listening on udev Kernel Socket. [ 33.725874] systemd[1]: Starting udev Kernel Socket. [ 33.735414] systemd[1]: Starting Set boot sequence config... [ 33.742185] systemd[1]: Created slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice. [ 33.753072] systemd[1]: Starting system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice. [ 33.764363] systemd[1]: Created slice FileStation's slice. [ 33.772481] systemd[1]: Starting FileStation's slice. [ 33.782065] systemd[1]: Starting Disabling fan checking flag ...... [ 33.790110] systemd[1]: Created slice ffmpeg's slice. [ 33.797417] systemd[1]: Starting ffmpeg's slice. [ 33.820123] systemd[1]: Starting Load Kernel Modules... [ 33.825932] systemd[1]: Created slice BTRFS Optimization. [ 33.833991] systemd[1]: Starting BTRFS Optimization. [ 33.842266] systemd[1]: Created slice VideoStation's slice. [ 33.850349] systemd[1]: Starting VideoStation's slice. [ 33.860200] systemd[1]: Starting Load ntb_brd module... [ 33.866271] systemd[1]: Created slice SecureSignIn's slice. [ 33.874525] systemd[1]: Starting SecureSignIn's slice. [ 33.882918] systemd[1]: Created slice Synology Index slice (WAT). [ 33.891690] systemd[1]: Starting Synology Index slice (WAT). [ 33.900541] systemd[1]: Created slice Python2's slice. [ 33.908276] systemd[1]: Starting Python2's slice. [ 33.917387] systemd[1]: Mounted Debug File System. [ 33.925352] systemd[1]: Mounted Temporary Directory. [ 33.932331] systemd[1]: Started check integrity of rd.gz decompression. [ 33.941454] systemd[1]: Listening on Journal Socket (/dev/log). [ 33.950789] systemd[1]: Started unbind USB device. [ 33.958360] systemd[1]: Started Synology Task Scheduler Init. [ 33.967124] systemd[1]: Started Set hostname. [ 33.974381] systemd[1]: Started Set time zone information to kernel. [ 33.983813] systemd[1]: Started Set boot sequence config. [ 33.992079] systemd[1]: Started Disabling fan checking flag .... [ 34.001031] systemd[1]: Started Load ntb_brd module. [ 34.062078] systemd[1]: Starting Journal Service... [ 34.067259] systemd[1]: Reached target Sockets. [ 34.074783] systemd[1]: Starting Sockets. [ 34.081760] systemd[1]: Reached target Local File Systems. [ 34.088841] systemd[1]: Starting Local File Systems. [ 34.098670] systemd[1]: Starting udev Coldplug all Devices... [ 34.106211] systemd[1]: Starting D-Bus Session Message Bus... [ 34.115051] systemd[1]: Starting D-Bus System Message Bus... [ 34.125427] systemd[1]: Starting Set boot sequence config for temporary use... [ 34.137074] systemd[1]: Starting Mount usb fs... [ 34.214166] NET: Registered protocol family 10 [ 34.241266] sit: IPv6 over IPv4 tunneling driver [ 34.247854] systemd[1]: Started Set boot sequence config for temporary use. [ 34.383464] md: md1 stopped. [ 34.388332] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 34.413697] systemd[1]: Started udev Coldplug all Devices. [ 34.422991] systemd[1]: Started Mount usb fs. [ 34.429262] systemd[1]: Started Journal Service. [ 34.431783] md: bind [ 34.433708] md: bind [ 34.445903] md/raid1:md1: active with 2 out of 2 mirrors [ 34.463831] md1: detected capacity change from 0 to 2147418112 [ 34.473061] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 34.478587] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 34.541131] systemd-journald[2858]: Received request to flush runtime journal from PID 1 [ 34.563089] usbcore: registered new interface driver usb-storage [ 34.611378] uhci_hcd: USB Universal Host Controller Interface driver [ 34.684120] usbcore: registered new interface driver usblp [ 34.735540] usbcore: registered new interface driver usbhid [ 34.741261] usbhid: USB HID core driver [ 34.833530] synobios open /dev/ttyS1 success [ 34.837910] Synobios DS220j GPIO initialized [ 34.842336] synobios: load, major number 201 [ 34.846714] Brand: Synology [ 34.849574] Model: DS-220j [ 34.852375] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 34.852389] synobios cpu_arch proc entry initialized [ 34.852393] synobios crypto_hw proc entry initialized [ 34.852395] synobios syno_platform proc entry initialized [ 34.928202] Syno_HddMon: Initialization completed. [ 35.392143] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k [ 41.145705] RPC: Registered named UNIX socket transport module. [ 41.151787] RPC: Registered udp transport module. [ 41.156612] RPC: Registered tcp transport module. [ 41.161430] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 41.277079] xor: measuring software checksum speed [ 41.381671] 8regs : 2770.000 MB/sec [ 41.481666] 8regs_prefetch: 2393.200 MB/sec [ 41.581665] 32regs : 3178.000 MB/sec [ 41.681665] 32regs_prefetch: 2692.800 MB/sec [ 41.686391] xor: using function: 32regs (3178.000 MB/sec) [ 41.871737] raid6: int64x1 gen() 469 MB/s [ 42.041708] raid6: int64x1 xor() 525 MB/s [ 42.211692] raid6: int64x2 gen() 782 MB/s [ 42.381693] raid6: int64x2 xor() 697 MB/s [ 42.551696] raid6: int64x4 gen() 1125 MB/s [ 42.721668] raid6: int64x4 xor() 853 MB/s [ 42.891703] raid6: int64x8 gen() 1358 MB/s [ 43.061700] raid6: int64x8 xor() 905 MB/s [ 43.231700] raid6: neonx1 gen() 870 MB/s [ 43.401668] raid6: neonx1 xor() 875 MB/s [ 43.571691] raid6: neonx2 gen() 1309 MB/s [ 43.741687] raid6: neonx2 xor() 1178 MB/s [ 43.911669] raid6: neonx4 gen() 1706 MB/s [ 44.081677] raid6: neonx4 xor() 1352 MB/s [ 44.251700] raid6: neonx8 gen() 1767 MB/s [ 44.421674] raid6: neonx8 xor() 1387 MB/s [ 44.426044] raid6: using algorithm neonx8 gen() 1767 MB/s [ 44.431570] raid6: .... xor() 1387 MB/s, rmw enabled [ 44.436658] raid6: using intx1 recovery algorithm [ 44.604425] r8169 98016000.gmac eth0: rtl_csiar_cond == 0 (loop: 100, delay: 10). [ 44.614818] r8169 98016000.gmac eth0: rtl_csiar_cond == 1 (loop: 100, delay: 10). [ 44.625359] r8169 98016000.gmac eth0: link down [ 44.625373] r8169 98016000.gmac eth0: link down [ 44.636298] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 45.092343] Btrfs loaded, crc32c=crc32c-arm64-hw [ 45.131995] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 48.159341] r8169 98016000.gmac eth0: link up 1 Gbps [ 48.164590] r8169_reset_task: reset with slow event. [ 48.169950] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 48.236735] r8169 98016000.gmac eth0: rtl_csiar_cond == 0 (loop: 100, delay: 10). [ 48.245691] r8169 98016000.gmac eth0: rtl_csiar_cond == 1 (loop: 100, delay: 10). [ 48.254653] r8169 98016000.gmac eth0: link up 1 Gbps [ 48.730214] md: md2 stopped. [ 48.782329] md: bind [ 48.832174] md: bind [ 48.865892] md/raid1:md2: active with 2 out of 2 mirrors [ 48.890863] md2: detected capacity change from 0 to 1995451858944 [ 55.810705] EXT4-fs (dm-1): recovery complete [ 55.842725] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl [ 62.936927] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 62.968481] NFSD: starting 90-second grace period (net ffffffc0009c5800) [ 63.052322] Synotify use 16384 event queue size [ 63.057028] Synotify use 16384 event queue size [ 64.079969] ata1.00: configured for UDMA/133 [ 64.084419] ata1: EH complete [ 64.207794] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use) [ 64.387282] ata2.00: configured for UDMA/133 [ 64.391776] ata2: EH complete [ 66.681182] ip_tables: (C) 2000-2006 Netfilter Core Team [ 66.726840] audit: type=1325 audit(1682216162.979:2): table=filter family=2 entries=0 [ 66.759695] nf_conntrack version 0.5.0 (3878 buckets, 15512 max) [ 67.229975] audit: type=1325 audit(1682216163.479:3): table=filter family=2 entries=4 [ 67.255794] audit: type=1325 audit(1682216163.509:4): table=filter family=2 entries=8 [ 68.768822] audit: type=1325 audit(1682216165.019:5): table=filter family=2 entries=9 [ 68.794910] audit: type=1325 audit(1682216165.049:6): table=filter family=2 entries=8 [ 68.866634] Module [xt_recent] is removed. [ 68.988666] Module [xt_iprange] is removed. [ 69.058430] Module [xt_limit] is removed. [ 69.138837] Module [xt_state] is removed. [ 69.208146] Module [xt_tcpudp] is removed. [ 69.257044] Module [xt_multiport] is removed. [ 69.371277] Module [xt_LOG] is removed. [ 69.428449] Module [nf_conntrack_ipv4] is removed. [ 69.969308] Module [nf_defrag_ipv4] is removed. [ 70.068606] Module [iptable_filter] is removed. [ 70.178736] Module [ip_tables] is removed. [ 72.020581] 8021q: 802.1Q VLAN Support v1.8 [ 72.926125] findhostd uses obsolete (PF_INET,SOCK_PACKET) [ 74.129823] r8152: module verification failed: signature and/or required key missing - tainting kernel [ 74.141979] usbcore: registered new interface driver r8152 [ 87.433918] fuse init (API version 7.23) [ 106.461063] Synotify use 16384 event queue size [ 2781.287644] Synotify use 16384 event queue size [14878.471091] ip_tables: (C) 2000-2006 Netfilter Core Team [14878.677817] audit: type=1325 audit(1682230975.856:7): table=filter family=2 entries=0 [14879.441572] audit: type=1325 audit(1682230976.616:8): table=filter family=2 entries=4 [14879.465668] audit: type=1325 audit(1682230976.636:9): table=filter family=2 entries=8 [14881.009589] audit: type=1325 audit(1682230978.186:10): table=filter family=2 entries=9 [14881.034485] audit: type=1325 audit(1682230978.206:11): table=filter family=2 entries=8 [14881.108330] Module [xt_recent] is removed. [14881.221814] Module [xt_iprange] is removed. [14881.291526] Module [xt_limit] is removed. [14881.362878] Module [xt_state] is removed. [14881.441774] Module [xt_tcpudp] is removed. [14881.503046] Module [xt_multiport] is removed. [14881.601777] Module [xt_LOG] is removed. [14881.671254] Module [nf_conntrack_ipv4] is removed. [14882.041153] Module [nf_defrag_ipv4] is removed. [14882.101075] Module [iptable_filter] is removed. [14882.230926] Module [ip_tables] is removed.


### Output of ``lsusb`` command
|__usb2          1d6b:0002:0404 09  2.00  480MBit/s 0mA 1IF  (Linux 4.4.180+ xhci-hcd xHCI Host Controller xhci-hcd.2.auto) hub
|__usb3          1d6b:0003:0404 09  3.00 5000MBit/s 0mA 1IF  (Linux 4.4.180+ xhci-hcd xHCI Host Controller xhci-hcd.2.auto) hub
|__usb4          1d6b:0002:0404 09  2.00  480MBit/s 0mA 1IF  (Linux 4.4.180+ xhci-hcd xHCI Host Controller xhci-hcd.5.auto) hub
|__usb5          1d6b:0003:0404 09  3.00 5000MBit/s 0mA 1IF  (Linux 4.4.180+ xhci-hcd xHCI Host Controller xhci-hcd.5.auto) hub

Output of ifconfig -a command

eth0 Link encap:Ethernet HWaddr 00:11:32:C9:CF:7B inet addr:192.168.100.100 Bcast:192.168.100.255 Mask:255.255.255.0 inet6 addr: fe80::211:32ff:fec9:cf7b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11791916 errors:0 dropped:0 overruns:0 frame:0 TX packets:78309339 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:880059492 (839.2 MiB) TX bytes:282296358648 (262.9 GiB) Interrupt:11

lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:35293 errors:0 dropped:0 overruns:0 frame:0 TX packets:35293 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:5635758 (5.3 MiB) TX bytes:5635758 (5.3 MiB)

sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

bb-qq commented 1 year ago

The symptoms reported appear to be the same as those discussed in this assignment. https://github.com/bb-qq/r8152/issues/275

To avoid splitting the discussion, please let this assignment merge with the one above.