Everything seems to happen as per the installation steps provided by the devs, installing from the .spk file gives a fail error, running the ssh command seems to be accepted happily, then if I understand the instructions I attempted installing from .spk file again before restarting. Upon restarting the driver still shows as stopped in the list of Packages and asks to be repaired.
I have confirmed the usb adapter works when plugged into a Windows 10 PC.
Front and back USB ports get the same result.
Description of the problem
Everything seems to happen as per the installation steps provided by the devs, installing from the .spk file gives a fail error, running the ssh command seems to be accepted happily, then if I understand the instructions I attempted installing from .spk file again before restarting. Upon restarting the driver still shows as stopped in the list of Packages and asks to be repaired.
I have confirmed the usb adapter works when plugged into a Windows 10 PC. Front and back USB ports get the same result.
Stacks more info here https://github.com/bb-qq/r8152/discussions/310
Description of your products
Description of your environment
Output of
dmesg
commandhttps://pastebin.com/vDxXkvj2
Output of
lsusb
command[redacted]@Nightmaresonwax:~$ lsusb |usb1 1d6b:0002:0404 09 2.00 480MBit/s 0mA 1IF (Linux 4.4.180+ xhci-hcd xHCI Host Controller 0000:00:15.0) hub |1-4 f400:f400:0100 00 2.00 480MBit/s 200mA 1IF (Synology DiskStation 7F00835A19DA5A83) |usb2 1d6b:0003:0404 09 3.00 5000MBit/s 0mA 1IF (Linux 4.4.180+ xhci-hcd xHCI Host Controller 0000:00:15.0) hub |2-1 0bda:8156:3104 00 3.20 5000MBit/s 256mA 2IFs (Realtek USB 10/100/1G/2.5G LAN 401000001)
Output of
ifconfig -a
commandhttps://pastebin.com/SxVGM8S1