search

bb-qq / r8152

Synology DSM driver for Realtek RTL8152/RTL8153/RTL8156 based adapters
GNU General Public License v2.0
2.15k stars 188 forks source link

synology ds220J with USB nic RTL8156 won't work #388

Closed ziv01 closed 6 months ago

ziv01 commented 7 months ago

Description of the problem

I have a ds220J nas, Installed pre-release r8152-rtd1296-2.17.1-2_7.2.spk driver. Installation went well driver is up and running. When I connect the USB nic to the usb port at the nas it wouldn't show under interfaces. when I stop the service/driver it does stop it. when I try to start it again it won't start

Description of your products

DS220J

  • synology_rtd1296_ds220j
  • DSM version - DSM 7.2.1-69057 Update 3
    • RTL8156

Description of your environment

  • connect directly to a PC or using a Ethernet switch
    • PC: NIC Intel X540
    • Ethernet switch: TL-SX3008F
  • cable category Cat.7

Output of dmesg command

@DS220j:~$ dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.302+ (root@build8) (gcc version 12.2.0 (GCC) ) #69057 SMP Mon Nov 13 14:19:59 CST 2023
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] cma: Reserved 32 MiB at 0x000000001e000000
[    0.000000] On node 0 totalpages: 131072
[    0.000000]   DMA zone: 2048 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 131072 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.1 detected in firmware.
[    0.000000] psci: Conflicting PSCI version detected.
[    0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc01df81000 s20504 r8192 d32744 u61440
[    0.000000] pcpu-alloc: s20504 r8192 d32744 u61440 alloc=15*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129024
[    0.000000] Kernel command line: ip=off console=ttyS0,115200 root=/dev/md0 rw syno_hdd_detect=4,5 syno_hdd_enable=85,86 syno_spinup_group=1,1 syno_spinup_group_delay=5 syno_usb_vbus_gpio=23@xhci-hcd.2.auto@0,22@xhci-hcd.5.auto@0 syno_hw_version=DS220j hd_power_on_seq=2 ihd_num=2 netif_num=1 swiotlb=1 audio_version=1012363 syno_fw_version=M.811 U-boot=2012.07-g9f8956c (Oct 31 2019 - 18:42:13)
[    0.000000] SYNO GPIO hdd detect pin: 4 5
[    0.000000] SYNO GPIO hdd enable pin: 85 86
[    0.000000] SYNO Spinup Group 0: 1
[    0.000000] SYNO Spinup Group 1: 1
[    0.000000] SYNO Spinup Group Delay: 5
[    0.000000] USB Vbus GPIO Control:
[    0.000000]  Gpp#23 - Host: xhci-hcd.2.auto      - Port:1 - Polarity: ACTIVE_HIGH
[    0.000000]  Gpp#22 - Host: xhci-hcd.5.auto      - Port:1 - Polarity: ACTIVE_HIGH
[    0.000000] Synology Hardware Version: DS220j
[    0.000000] Internal HD num: 2
[    0.000000] Internal netif num: 1
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] software IO TLB: mapped [mem 0x1de7d000-0x1debd000] (0MB)
[    0.000000] Memory: 459064K/524288K available (5139K kernel code, 309K rwdata, 1808K rodata, 252K init, 445K bss, 32456K reserved, 32768K cma-reserved)
[    0.000000] Virtual kernel memory layout:
                   vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000   (   246 GB)
                   vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
                             0xffffffbdc0000000 - 0xffffffbdc0800000   (     8 MB actual)
                   fixed   : 0xffffffbffa7fd000 - 0xffffffbffac00000   (  4108 KB)
                   PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000   (    16 MB)
                   modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
                   memory  : 0xffffffc000000000 - 0xffffffc020000000   (   512 MB)
                     .init : 0xffffffc00094a000 - 0xffffffc000989000   (   252 KB)
                     .text : 0xffffffc000280000 - 0xffffffc0009495f4   (  6950 KB)
                     .data : 0xffffffc000997000 - 0xffffffc0009e46c0   (   310 KB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] Architected cp15 timer(s) running at 27.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
[    0.000005] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
[    0.000076] [RTK-TIMER0] set mode: CLOCK_EVT_MODE_SHUTDOWN
[    0.000087] [RTK-TIMER0] clocksource 0 register HZ
[    0.000097] clocksource: rtk_timer0_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 70787423951 ns
[    0.000145] [RTK-TIMER0] set mode: CLOCK_EVT_MODE_SHUTDOWN
[    0.000153] [RTK-TIMER1] set mode: CLOCK_EVT_MODE_SHUTDOWN
[    0.000162] [RTK-TIMER1] clocksource 1 register HZ
[    0.000171] clocksource: rtk_timer1_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 579169832313 ns
[    0.000437] [RTK_MEM_REMAP] initialized
[    0.000700] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=270000)
[    0.000712] pid_max: default: 32768 minimum: 301
[    0.000861] Security Framework initialized
[    0.000886] AppArmor: AppArmor initialized
[    0.000954] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.000965] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.001662] Initializing cgroup subsys io
[    0.001679] Initializing cgroup subsys memory
[    0.001722] Initializing cgroup subsys devices
[    0.001735] Initializing cgroup subsys freezer
[    0.002061] ASID allocator initialised with 65536 entries
[    0.008793] pctrl-rtk: addr: 0x0002c00c [0x13fe8161 -> 0x135e8161], bit-diff = 0x00a00000, mask = 0x28a03012
[    0.008820] pctrl-rtk: addr: 0x0002e010 [0x5801e416 -> 0x58010414], bit-diff = 0x0000e002, mask = 0x0100e0a2
[    0.008845] pctrl-rtk: addr: 0x0003008c [0x00001f01 -> 0x00001901], bit-diff = 0x00000600, mask = 0x000006f8
[    0.008869] pctrl-rtk: addr: 0x00032000 [0xbfd01001 -> 0x97d01001], bit-diff = 0x28000000, mask = 0x68000354
[    0.008893] pctrl-rtk: addr: 0x00034004 [0x1f840e01 -> 0x0f840e01], bit-diff = 0x10000000, mask = 0x507be1fc
[    0.008916] pctrl-rtk: addr: 0x00036050 [0x0000801f -> 0x0000801f], bit-diff = 0x00000000, mask = 0x00007020
[    0.008939] pctrl-rtk: addr: 0x00038088 [0x00001f80 -> 0x00001f80], bit-diff = 0x00000000, mask = 0x00002062
[    0.008991] pctrl-rtk: pctrl_ve1::POWER_OFF, ret = 0
[    0.009072] pctrl-rtk: pctrl_ve2::POWER_OFF, ret = 0
[    0.009137] pctrl-rtk: pctrl_ve3::POWER_OFF, ret = 0
[    0.009199] pctrl-rtk: pctrl_l4_icg_jpeg::ENABLE_HW_PM, ret = -1
[    0.009259] pctrl-rtk: pctrl_gpu::POWER_OFF, ret = 0
[    0.009345] pctrl-rtk: pctrl_gpu_core_1::POWER_OFF, ret = 0
[    0.009421] pctrl-rtk: pctrl_gpu_core_2::POWER_OFF, ret = 0
[    0.009505] pctrl-rtk: pctrl_gpu_core_3::POWER_OFF, ret = 0
[    0.009621] pctrl-rtk: pctrl_l4_icg_vo::ENABLE_HW_PM, ret = 0
[    0.009690] pctrl-rtk: pctrl_l4_icg_aio::ENABLE_HW_PM, ret = -1
[    0.010094] pctrl-rtk: pctrl_audio_dac::POWER_OFF, ret = 0
[    0.010214] pctrl-rtk: pctrl_video_dac::POWER_OFF, ret = 0
[    0.010281] pctrl-rtk: pctrl_mhl3_en::POWER_OFF, ret = 0
[    0.010334] pctrl-rtk: pctrl_l4_icg_se::ENABLE_HW_PM, ret = 0
[    0.010387] pctrl-rtk: pctrl_l4_icg_mipi::ENABLE_HW_PM, ret = -1
[    0.010514] pctrl-rtk: pctrl_mipi_aphy::POWER_OFF, ret = 0
[    0.011113] pctrl-rtk: pctrl_l4_icg_nand::ENABLE_HW_PM, ret = -1
[    0.011172] pctrl-rtk: pctrl_usb_p0_mac::POWER_ON, ret = 0
[    0.011234] pctrl-rtk: pctrl_usb_p0_phy::POWER_ON, ret = 0
[    0.011397] pctrl-rtk: pctrl_usb_p3_mac_A: rev not match
[    0.011436] pctrl-rtk: pctrl_usb_p3_mac::POWER_ON, ret = 0
[    0.011494] pctrl-rtk: pctrl_usb_p3_phy::POWER_ON, ret = 0
[    0.011732] pctrl-rtk: pctrl_cr::POWER_OFF, ret = 0
[    0.011847] pctrl-rtk: pctrl_sdio::POWER_OFF, ret = 0
[    0.012220] pctrl-rtk: pctrl_pll_ve1::POWER_OFF, ret = 0
[    0.013257] Detected VIPT I-cache on CPU1
[    0.013299] CPU1: Booted secondary processor [410fd034]
[    0.013755] Detected VIPT I-cache on CPU2
[    0.013784] CPU2: Booted secondary processor [410fd034]
[    0.014218] Detected VIPT I-cache on CPU3
[    0.014248] CPU3: Booted secondary processor [410fd034]
[    0.014307] Brought up 4 CPUs
[    0.014334] SMP: Total of 4 processors activated.
[    0.014344] CPU features: detected feature: 32-bit EL0 Support
[    0.014353] CPU: All CPU(s) started at EL2
[    0.014378] alternatives: patching kernel code
[    0.015008] devtmpfs: initialized
[    0.027673] clk-rtk: scpu,pll,workaround 34055501
[    0.027681] clk-rtk: scpu,pll,workaround 04038500
[    0.032176] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.032206] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    0.033741] pinctrl core: initialized pinctrl subsystem
[    0.034646] NET: Registered protocol family 16
[    0.035590] vdso: 2 pages (1 code @ ffffffc00099d000, 1 data @ ffffffc00099c000)
[    0.035624] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.036866] DMA: preallocated 1024 KiB pool for atomic allocations
[    0.037237] rst-control : base ffffff800045a600, offset 0x40
[    0.037262] ****** rtk_lockapi_init 566, chip_revision = 0x00010000
[    0.037459] [PINCTRL] driver init
[    0.040645] [PINCTRL] init done
[    0.081054] ACPI: Interpreter disabled.
[    0.081140] [RTD129x_PM] Initial RTD129x Power Management Driver.
[    0.081644] [RTD129x_PM] wakeup-gpio Cnt: en(1) act(1) list(1)
[    0.081697] [RTD129x_PM] wakeup-gpio[0] Successful registration! (en:1 act:0 gpio:124)
[    0.081708] [RTD129x_PM] gpio-output-change Cnt: en(0) act(0) list(-2)
[    0.081716] [RTD129x_PM] Set suspend-mode = ram
[    0.081723] [RTD129x_PM] Wakeup Flags Set Default : 0x2d
[    0.082257] SCSI subsystem initialized
[    0.082444] libata version 3.00 loaded.
[    0.082585] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ENTER rtk_usb_power_manager_probe
[    0.082698] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_dwc3_drd status is okay
[    0.082712] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ehci status is okay
[    0.082723] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ohci status is okay
[    0.082733] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_dwc3_u3host status is okay
[    0.082758] rtk-usb-power-manager 98000000.rtk_usb_power_manager: set usb_power_domain/p3 on
[    0.088835] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_power_manager_probe OK (take 0 ms)
[    0.091009] clocksource: Switched to clocksource arch_sys_counter
[    0.091526] AppArmor: AppArmor Filesystem Enabled
[    0.091609] pnp: PnP ACPI: disabled
[    0.093338] NET: Registered protocol family 2
[    0.093945] IP idents hash table entries: 8192 (order: 4, 65536 bytes)
[    0.094700] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.094766] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[    0.094865] TCP: Hash tables configured (established 4096 bind 4096)
[    0.094922] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.094949] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.095114] NET: Registered protocol family 1
[    0.095157] PCI: CLS 0 bytes, default 128
[    0.095359] Trying to unpack rootfs image as initramfs...
[    3.661816] Freeing initrd memory: 4252K
[    3.662299] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    3.665071] audit: initializing netlink subsys (disabled)
[    3.665183] audit: type=2000 audit(3.659:1): initialized
[    3.665882] Initialise system trusted keyring
[    3.675954] VFS: Disk quotas dquot_6.6.0
[    3.676029] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.718929] Key type asymmetric registered
[    3.718955] Asymmetric key parser 'x509' registered
[    3.719080] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    3.719095] io scheduler noop registered
[    3.719109] io scheduler deadline registered
[    3.719150] io scheduler cfq registered (default)
[    3.720039] corectrl: CPU List = [ 1-3 ]
[    3.720393] [SB2 DBG][sb2_dbg_init] memory monitor 0x98013b00 - 0x98013c00
[    3.720405] [SB2 DBG][sb2_dbg_init] initialized
[    3.720636] rpc is not paused & suspended
[    3.732435] rpc_int_base:ffffff80044c0104 irq:18
[    3.732618] [PUWRAP] begin pu_init
[    3.732630] [PUWRAP] end pu_init result=0x0
[    3.733131] memalloc: Linear Memory Allocator
[    3.733656] jpu_init
[    3.733664] end jpu_init result=0x0
[    3.733896] misc rtk_lockapi: registered.
[    3.786690] AudioIntrRead:143 can't find process for handling AudioIntrRead programID:98
[    3.786711] AudioIntrRead: program:98 version:0 procedure:1 taskID:0 sysTID:4294967295 sysPID:4294967295 size:4 context:81bcc245 atomic
[    3.856183] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.858067] ####1 p->uartclk:27000000
[    3.858124] ####3 p->uartclk:27000000
[    3.858405] console [ttyS0] disabled
[    3.858458] 98007800.serial0: ttyS0 at MMIO 0x98007800 (irq = 194, base_baud = 1687500) is a 16550A
[    4.986227] console [ttyS0] enabled
[    4.990267] ####1 p->uartclk:432000000
[    4.994185] ####3 p->uartclk:432000000
[    4.998311] 9801b200.serial1: ttyS1 at MMIO 0x9801b200 (irq = 163, base_baud = 27000000) is a 16550A
[    5.023181] brd: module loaded
[    5.026344] Loading iSCSI transport class v2.0-870.
[    5.140559] [SATA] spread-spectrum disable
[    5.186826] [SATA] set tx-driving to L (level 4)
[    5.340791] [SATA] spread-spectrum disable
[    5.387029] [SATA] set tx-driving to L (level 4)
[    5.403858] ahci_rtk 9803f000.sata: masking port_map 0x3 -> 0x3
[    5.410010] ahci_rtk 9803f000.sata: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    5.419264] ahci_rtk 9803f000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc sadm sds apst
[    5.430003] ahci_rtk 9803f000.sata: port 0 is not capable of FBS
[    5.436802] ahci_rtk 9803f000.sata: port 1 is not capable of FBS
[    5.444887] scsi host0: ahci_rtk
[    5.460336] scsi host1: ahci_rtk
[    5.464199] ata1: SATA max UDMA/133 mmio [mem 0x9803f000-0x9803ffff] port 0x100 irq 12
[    5.472360] ata2: SATA max UDMA/133 mmio [mem 0x9803f000-0x9803ffff] port 0x180 irq 12
[    5.484507] Delay 5 seconds to wait for disk 2 ready.
[    5.490428] RtkSFC MTD init ...
[    5.493707] NOR flash support list ..
[    5.497466] (X) HWSEMA support.
[    5.500686] (V) AUTO_HW_POLL support.
[    5.504458] (X) 4Bytes mode support.
[    5.508126] (X) Max erase size support.
[    5.512071] (V) Sfc_delay support.
[    5.515560] (X) Multi-read support.
[    5.520180] --RDID Seq: 0xc2 | 0x20 | 0x18
[    5.524497] *byte1=0xc2
[    5.527158] *byte2=0x17
[    5.529754] RtkSFC MTD: MXIC MX25L12845E detected.
[    5.534691] SFC_4KB_ERASE
[    5.537386] Supported Erase Size: 64KB 32KB 4KB.
[    5.542164] RtkSFC MTD: Enable RtkSFC MD PP callback function.
[    5.548142] MD_READ Enable..
[    5.551113] MD_WRITE Enable..
[    5.554211] [rtk_sfc_attach]descriptor size 0x1000000
[    5.583947] Searching for RedBoot partition table in RtkSFC at offset 0xfff000
[    5.595402] 7 RedBoot partitions found on MTD device RtkSFC
[    5.601118] Rtk SFC: using dynamic partition
[    5.605494] Creating 7 MTD partitions on "RtkSFC":
[    5.610412] 0x000000000000-0x000000100000 : "RedBoot"
[    5.616924] 0x000000100000-0x000000450000 : "zImage"
[    5.626009] 0x000000450000-0x000000877000 : "rd.gz"
[    5.632394] 0x000000877000-0x000000887000 : "vendor"
[    5.637653] vender Mac0 address : 90:09:d0:0b:7b:3c
[    5.642681] vender Mac1 doesn't set ucSum:0x00 Buf:0x00 Sum:0.
[    5.648661] vender Mac2 doesn't set ucSum:0x00 Buf:0x00 Sum:0.
[    5.654652] vender Mac3 doesn't set ucSum:0x00 Buf:0x00 Sum:0.
[    5.660639] serial number='21B0RKRD9C5VG'
[    5.688888] 0x000000887000-0x000000bd7000 : "zImage_bak"
[    5.705743] 0x000000bd7000-0x000000ffe000 : "rd.gz_bak"
[    5.742521] 0x000000fff000-0x000001000000 : "FIS directory"
[    5.753388] Rtk SFC: (for SST/SPANSION/MXIC SPI Flash)
[    5.758677] Realtek SFC Driver is successfully installing.

[    5.782758] r8169 Gigabit Ethernet driver 2.32.5-LK-NAPI loaded
[    5.802504] r8169 98016000.gmac eth0: RTL8169SOC at 0xffffff800459e000, 00:10:20:30:40:50, XID 10900800 IRQ 11
[    5.812794] r8169 98016000.gmac eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    5.837307] rtk_rbus_init:89
[    5.840485] rtk_rbus_probe:27
[    5.843575] [Ethernet] Watch link status change.
[    5.849279] rtk_refclk_init:101
[    5.852807] rtk_refclk_probe:27
[    5.865721] rtk_md_probe: res.start=0x000000009800b000 res.end=0x000000009800bfff
[    5.873446] rtk_md_probe: mem[0] phys:0x000000009800b000 virt:0xffffff80045a6000 size:0x1000 type:1 name:MD reg space
[    8.481179] rtk_md_probe: mem[1] phys:0x000000001e117000 virt:0xffffff80045a8000 size:0x1000 type:1 name:MD driver data
[    8.492617] rtk_md_probe: mem[2] phys:0x000000001e118000 virt:0xffffff80045aa000 size:0x4000 type:1 name:MD command queue
[    8.503911] rtk_md_probe: irq=20
[    8.507567] Engine[0] Ctrl:0000000c Base:1e118000 ReadPtr:1e118000 WritePtr:1e118000 Limit:1e11c000
[    8.517252] rtc_rtd129x 9801b600.rtc: rtk_rtc already enabled
[    8.525731] rtc_rtd129x 9801b600.rtc: rtc core: registered rtc as rtc0
[    8.532571] i2c /dev entries driver
[    8.539445] md: raid1 personality registered for level 1
[    8.545348] cpufreq: freq_table: frequency-table,rev1:
[    8.550625] cpufreq:  0 .volidx = 0 .freq =  300000
[    8.555759] cpufreq:  1 .volidx = 0 .freq =  400000
[    8.560852] cpufreq:  2 .volidx = 0 .freq =  500000
[    8.565959] cpufreq:  3 .volidx = 2 .freq =  600000
[    8.571058] cpufreq:  4 .volidx = 3 .freq =  700000
[    8.576145] cpufreq:  5 .volidx = 4 .freq =  800000
[    8.581240] cpufreq:  6 .volidx = 5 .freq =  900000
[    8.586326] cpufreq:  7 .volidx = 6 .freq = 1000000
[    8.591420] cpufreq:  8 .volidx = 8 .freq = 1100000
[    8.596507] cpufreq:  9 .volidx = 10 .freq = 1200000
[    8.601698] cpufreq: 10 .volidx = 12 .freq = 1300000
[    8.606874] cpufreq: 11 .volidx = 13 .freq = 1400000
[    8.612064] cpufreq: volt_table: voltage-table:
[    8.616706] cpufreq: 0 .vdd_min =  800000 .vdd_max =  800000
[    8.622603] cpufreq: 1 .vdd_min =  812500 .vdd_max =  812500
[    8.628489] cpufreq: 2 .vdd_min =  825000 .vdd_max =  825000
[    8.634385] cpufreq: 3 .vdd_min =  850000 .vdd_max =  850000
[    8.640271] cpufreq: 4 .vdd_min =  875000 .vdd_max =  875000
[    8.646165] cpufreq: 5 .vdd_min =  900000 .vdd_max =  900000
[    8.652059] cpufreq: 6 .vdd_min =  925000 .vdd_max =  925000
[    8.657945] cpufreq: 7 .vdd_min =  950000 .vdd_max =  950000
[    8.663839] cpufreq: 8 .vdd_min =  962500 .vdd_max =  962500
[    8.669725] cpufreq: 9 .vdd_min =  975000 .vdd_max =  975000
[    8.675620] cpufreq: 10 .vdd_min = 1012500 .vdd_max = 1012500
[    8.681603] cpufreq: 11 .vdd_min = 1025000 .vdd_max = 1025000
[    8.687579] cpufreq: 12 .vdd_min = 1062500 .vdd_max = 1062500
[    8.693562] cpufreq: 13 .vdd_min = 1100000 .vdd_max = 1100000
[    8.699539] cpufreq: volt_table: l2-voltage-table:
[    8.704607] cpufreq: 0 .vdd_min =  900000 .vdd_max =  900000
[    8.710494] cpufreq: 1 .vdd_min =  900000 .vdd_max =  900000
[    8.716395] cpufreq: 2 .vdd_min =  900000 .vdd_max =  900000
[    8.722295] cpufreq: 3 .vdd_min =  900000 .vdd_max =  900000
[    8.728182] cpufreq: 4 .vdd_min =  900000 .vdd_max =  900000
[    8.734077] cpufreq: 5 .vdd_min =  900000 .vdd_max =  900000
[    8.739963] cpufreq: 6 .vdd_min =  900000 .vdd_max =  900000
[    8.745858] cpufreq: 7 .vdd_min =  900000 .vdd_max =  900000
[    8.751753] cpufreq: 8 .vdd_min =  900000 .vdd_max =  900000
[    8.757639] cpufreq: 9 .vdd_min =  900000 .vdd_max =  900000
[    8.763533] cpufreq: 10 .vdd_min =  950000 .vdd_max =  950000
[    8.769508] cpufreq: 11 .vdd_min =  950000 .vdd_max =  950000
[    8.775492] cpufreq: 12 .vdd_min = 1000000 .vdd_max = 1000000
[    8.781476] cpufreq: 13 .vdd_min = 1000000 .vdd_max = 1000000
[    8.805762] NET: Registered protocol family 17
[    8.810357] Key type dns_resolver registered
[    8.815289] registered taskstats version 1
[    8.819508] Loading compiled-in untrusted X.509 certificates
[    8.825367] Loading compiled-in X.509 certificates
[    8.830329] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[    8.842908] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[    8.853263] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[    8.865125] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[    8.875214] page_owner is disabled
[    8.878781] AppArmor: AppArmor sha1 policy hashing enabled
[    8.884623] scpu wrappee irq 16, scpu_wrap_addr 0xffffff80045b8000

[    8.893385] [SCPU_WRAPPER] initialized
[    8.897222] [SCPU_WRAPPER][scpu_wrapper_init] memory monitor 0x98013b00 - 0x98013c00
[    8.905342] rtc_rtd129x 9801b600.rtc: setting system clock to 2024-04-05 08:19:01 UTC (1712305141)
[    8.920902] thermal thermal_zone0: current temp is 42 C
[    8.926468] thermal cooling_device0: thermal-cpufreq-0 bind to TP0: 1 -> 6, ret = 0
[    8.934345] thermal cooling_device0: thermal-cpufreq-0 bind to TP1: 7 -> 11, ret = 0
[    8.948418] corectrl: token_owenr X -> cpufreq
[    8.955783] dcdc1: disabling
[    8.958741] dcdc2: disabling
[    8.961701] dcdc3: disabling
[    8.964641] dcdc5: disabling
[    8.967589] dcdc6: disabling
[    8.970536] ldo2: disabling
[    8.973399] ldo3: disabling
[   13.851006] ata1: link is slow to respond, please be patient (ready=0)
[   17.531013] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   17.550106] ata1.00: ATA-10: WDC WD80EAZZ-00BKLB0, 80.00A80, max UDMA/133
[   17.557063] ata1.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   17.564193] ata1.00: SN:         WD-CA0WJV6K
[   17.568892] ata1.00: configured for UDMA/133
[   17.573816] scsi 0:0:0:0: Direct-Access     WDC      WD80EAZZ-00BKLB0         0A80 PQ: 0 ANSI: 5
[   17.583352] sd 0:0:0:0: [sda] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[   17.591389] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   17.596892] sd 0:0:0:0: [sda] Write Protect is off
[   17.601820] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   17.601891] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   17.664551]  sda: sda1 sda2 sda5
[   17.668673] sd 0:0:0:0: [sda] Attached SCSI disk
[   18.891011] ata2: link is slow to respond, please be patient (ready=0)
[   20.071006] pctrl-rtk: rtk_powerctrl_manager: begin
[   20.076226] pctrl-rtk: pctrl_l4_icg_scpu_wrapper::ENABLE_HW_PM, ret = 0
[   20.093017] pctrl-rtk: pctrl_l4_icg_sb2::ENABLE_HW_PM, ret = 0
[   20.103996] pctrl-rtk: pctrl_l4_icg_tp::ENABLE_HW_PM, ret = -1
[   20.119982] pctrl-rtk: pctrl_l4_icg_rsa::ENABLE_HW_PM, ret = 0
[   20.135972] pctrl-rtk: pctrl_l4_icg_cp::ENABLE_HW_PM, ret = 0
[   20.151871] pctrl-rtk: pctrl_l4_icg_gspi::ENABLE_HW_PM, ret = -1
[   20.163072] pctrl-rtk: pctrl_nat::POWER_OFF, ret = 0
[   20.173162] pctrl-rtk: pctrl_l4_icg_nat_wrap::ENABLE_HW_PM, ret = -1
[   20.194724] pctrl-rtk: rtk_powerctrl_manager: done
[   22.751014] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   22.767415] ata2.00: ATA-10: WDC WD80EAZZ-00BKLB0, 80.00A80, max UDMA/133
[   22.774370] ata2.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   22.781501] ata2.00: SN:         WD-CA0XG93K
[   22.786203] ata2.00: configured for UDMA/133
[   22.791153] scsi 1:0:0:0: Direct-Access     WDC      WD80EAZZ-00BKLB0         0A80 PQ: 0 ANSI: 5
[   22.800726] sd 1:0:0:0: [sdb] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[   22.808797] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[   22.814329] sd 1:0:0:0: [sdb] Write Protect is off
[   22.819243] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   22.819312] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   22.869104]  sdb: sdb1 sdb2 sdb5
[   22.873235] sd 1:0:0:0: [sdb] Attached SCSI disk
[   22.878201] Freeing unused kernel memory: 252K
[   22.882844] Freeing alternatives memory: 40K
[   23.881004] random: nonblocking pool is initialized
[   23.975486] rtk-usb-phy-rle0599 98013824.usb_phy_rle0599: Probe RTK USB 2.0 RLE0599 PHY
[   23.995611] rtk-usb2phy 98028280.dwc3_drd_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Probe RTK USB 2.0 PHY
[   24.005533] rtk-usb2phy 98031280.dwc3_u2host_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Probe RTK USB 2.0 PHY
[   24.015554] rtk-usb2phy 981f8280.dwc3_u3host_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Probe RTK USB 2.0 PHY
[   24.037263] rtk-usb3phy 98013210.dwc3_drd_usb3phy: drivers/usb/phy/phy-rtk-usb3.c Probe RTK USB 3.0 PHY
[   24.046968] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: drivers/usb/phy/phy-rtk-usb3.c Probe RTK USB 3.0 PHY
[   24.079155] usbcore: registered new interface driver usbfs
[   24.084964] usbcore: registered new interface driver hub
[   24.090507] usbcore: registered new device driver usb
[   24.127876] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   24.144727] ehci-pci: EHCI PCI platform driver
[   24.204247] rtk-dwc3 98013200.rtk_dwc3_drd: Probe Realtek-SoC USB DWC3 Host Controller
[   24.212992] dwc3 98020000.dwc3_drd: rtk dwc3 fixed dwc3 globals register start address 0xffffff80066f8100
[   24.223253] rtk-usb3phy 98013210.dwc3_drd_usb3phy: drivers/usb/phy/phy-rtk-usb3.c Init RTK USB 3.0 PHY
[   24.237926] rtk-usb3phy 98013210.dwc3_drd_usb3phy: drivers/usb/phy/phy-rtk-usb3.c Initialized RTK USB 3.0 PHY
[   24.448164] rtk-usb2phy 98028280.dwc3_drd_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Init RTK USB 2.0 PHY
[   24.457723] rtk-usb2phy 98028280.dwc3_drd_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Initialized RTK USB 2.0 PHY
[   24.768124] xhci-hcd xhci-hcd.2.auto: power control enabled
[   24.774094] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[   24.779736] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2
[   24.788001] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00010010
[   24.796943] xhci-hcd xhci-hcd.2.auto: irq 9, io mem 0x98020000
[   24.803385] hub 2-0:1.0: USB hub found
[   24.807269] hub 2-0:1.0: 1 port detected
[   24.811392]  port1 is going to power up Vbus by GPIO#23(ACTIVE_HIGH)
[   24.917915] host xhci-hcd.2.auto port 1 has Vbus GPIO#23 with polarity ACTIVE_HIGH
[   24.925876] xhci-hcd xhci-hcd.2.auto: power control enabled
[   24.931593] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[   24.937214] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
[   24.945101] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[   24.953807] hub 3-0:1.0: USB hub found
[   24.957697] hub 3-0:1.0: 1 port detected
[   24.961777] host xhci-hcd.2.auto port 1 has Vbus GPIO#23 with polarity ACTIVE_HIGH
[   24.970067] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_init_power_on for 98013200.rtk_dwc3_drd
[   24.980625] rtk-dwc3 98013200.rtk_dwc3_drd: dwc3_rtk_probe ok! (take 770 ms)
[   24.988037] rtk-dwc3 98013e00.rtk_dwc3_u3host: Probe Realtek-SoC USB DWC3 Host Controller
[   24.996895] dwc3 981f0000.dwc3_u3host: rtk dwc3 fixed dwc3 globals register start address 0xffffff8006728100
[   25.007292] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: drivers/usb/phy/phy-rtk-usb3.c Init RTK USB 3.0 PHY
[   25.022229] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: drivers/usb/phy/phy-rtk-usb3.c Initialized RTK USB 3.0 PHY
[   25.232659] rtk-usb2phy 981f8280.dwc3_u3host_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Init RTK USB 2.0 PHY
[   25.242483] rtk-usb2phy 981f8280.dwc3_u3host_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Initialized RTK USB 2.0 PHY
[   25.553133] xhci-hcd xhci-hcd.5.auto: power control enabled
[   25.558847] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[   25.564535] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4
[   25.572741] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00010010
[   25.581668] xhci-hcd xhci-hcd.5.auto: irq 9, io mem 0x981f0000
[   25.588102] hub 4-0:1.0: USB hub found
[   25.592028] hub 4-0:1.0: 1 port detected
[   25.596115]  port1 is going to power up Vbus by GPIO#22(ACTIVE_HIGH)
[   25.702656] host xhci-hcd.5.auto port 1 has Vbus GPIO#22 with polarity ACTIVE_HIGH
[   25.710623] xhci-hcd xhci-hcd.5.auto: power control enabled
[   25.716411] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[   25.722041] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5
[   25.729919] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[   25.738630] hub 5-0:1.0: USB hub found
[   25.742638] hub 5-0:1.0: 1 port detected
[   25.746699] host xhci-hcd.5.auto port 1 has Vbus GPIO#22 with polarity ACTIVE_HIGH
[   25.754959] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_init_power_on for 98013e00.rtk_dwc3_u3host
[   25.765768] rtk-dwc3 98013e00.rtk_dwc3_u3host: dwc3_rtk_probe ok! (take 780 ms)
[   25.798573] ds220j_synobios: loading out-of-tree module taints kernel.
[   25.807287] synobios open /dev/ttyS1 success
[   25.812648] Synobios DS220j GPIO initialized
[   25.817054] synobios: load, major number 201
[   25.821490] Brand: Synology
[   25.824349] Model: DS-220j
[   25.827118] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   25.835775] synobios cpu_arch proc entry initialized
[   25.840857] synobios crypto_hw proc entry initialized
[   25.846033] synobios syno_platform proc entry initialized
[   25.863049] Module [ds220j_synobios] is removed.
[   25.867887] synobios: unload
[   26.104391] md: md0 stopped.
[   26.108654] md: bind<sdb1>
[   26.111860] md: bind<sda1>
[   26.115154] md/raid1:md0: active with 2 out of 2 mirrors
[   26.134024] md0: detected capacity change from 0 to 2549940224
[   27.491813] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   27.668516] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[   27.758314] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   27.774889] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[   27.995151] loop: module loaded
[   28.291069] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
[   32.526641] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   32.547932] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[   33.140963] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   33.175588] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[   33.556701] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[   33.575236] systemd[1]: Detected architecture arm64.
[   33.599664] systemd[1]: Set hostname to <DS220j>.
[   36.949753] systemd[1]: Cannot add dependency job for unit synoperfeventd.service, ignoring: Unit synoperfeventd.service is masked.
[   36.962509] systemd[1]: Cannot add dependency job for unit pkg-install-high-priority-builtin.service, ignoring: Unit pkg-install-high-priority-builtin.service failed to load: No such file or directory.
[   36.980991] systemd[1]: Cannot add dependency job for unit pkg-synorelayd-reload-fixed-package-config.service, ignoring: Unit synorelayd.service failed to load: No such file or directory.
[   36.998093] systemd[1]: Cannot add dependency job for unit pkg-synorelayd-reload-package-config.service, ignoring: Unit synorelayd.service failed to load: No such file or directory.
[   37.014755] systemd[1]: Cannot add dependency job for unit pkg-install-low-priority-builtin.service, ignoring: Unit pkg-install-low-priority-builtin.service failed to load: No such file or directory.
[   37.032979] systemd[1]: Cannot add dependency job for unit pkgctl-Node.js_v12.service, ignoring: Unit pkgctl-Node.js_v12.service failed to load: No such file or directory.
[   37.052712] systemd[1]: Reached target Paths.
[   37.059983] systemd[1]: Starting Paths.
[   37.065247] systemd[1]: Created slice Root Slice.
[   37.071483] systemd[1]: Starting Root Slice.
[   37.078745] systemd[1]: Created slice SSDP service.
[   37.085150] systemd[1]: Starting SSDP service.
[   37.092712] systemd[1]: Created slice Synology Index slice (WAT).
[   37.100357] systemd[1]: Starting Synology Index slice (WAT).
[   37.109275] systemd[1]: Created slice Task Scheduler Group.
[   37.115860] systemd[1]: Starting Task Scheduler Group.
[   37.124164] systemd[1]: Listening on Journal Audit Socket.
[   37.131612] systemd[1]: Starting Journal Audit Socket.
[   37.139959] systemd[1]: Created slice PHP8.2's slice.
[   37.146836] systemd[1]: Starting PHP8.2's slice.
[   37.154662] systemd[1]: Created slice Node.js_v18's slice.
[   37.161532] systemd[1]: Starting Node.js_v18's slice.
[   37.169807] systemd[1]: Created slice OpenBSD Secure Shell server.
[   37.177831] systemd[1]: Starting OpenBSD Secure Shell server.
[   37.186794] systemd[1]: Created slice Python2's slice.
[   37.194473] systemd[1]: Starting Python2's slice.
[   37.202380] systemd[1]: Created slice BTRFS Space Reclaim.
[   37.209337] systemd[1]: Starting BTRFS Space Reclaim.
[   37.217607] systemd[1]: Created slice FileStation's slice.
[   37.224926] systemd[1]: Starting FileStation's slice.
[   37.233187] systemd[1]: Created slice SynoFinder's slice.
[   37.240411] systemd[1]: Starting SynoFinder's slice.
[   37.248597] systemd[1]: Created slice Node.js_v20's slice.
[   37.255820] systemd[1]: Starting Node.js_v20's slice.
[   37.264107] systemd[1]: Created slice Synology Flashcache.
[   37.271401] systemd[1]: Starting Synology Flashcache.
[   37.279664] systemd[1]: Created slice SupportService's slice.
[   37.287252] systemd[1]: Starting SupportService's slice.
[   37.295791] systemd[1]: Created slice SynologyPhotos's slice.
[   37.303631] systemd[1]: Starting SynologyPhotos's slice.
[   37.312159] systemd[1]: Created slice SMBService's slice.
[   37.319651] systemd[1]: Starting SMBService's slice.
[   37.327775] systemd[1]: Listening on Journal Socket.
[   37.334570] systemd[1]: Starting Journal Socket.
[   37.342389] systemd[1]: Created slice StorageManager's slice.
[   37.349390] systemd[1]: Starting StorageManager's slice.
[   37.357933] systemd[1]: Created slice Shared Folder Sync.
[   37.365421] systemd[1]: Starting Shared Folder Sync.
[   37.373599] systemd[1]: Created slice scemd.
[   37.379574] systemd[1]: Starting scemd.
[   37.386608] systemd[1]: Created slice BTRFS Optimization.
[   37.392585] systemd[1]: Starting BTRFS Optimization.
[   37.400769] systemd[1]: Created slice Synology DSM desktop service.
[   37.408790] systemd[1]: Starting Synology DSM desktop service.
[   37.417874] systemd[1]: Created slice RAID Resync Process. Including Resync, Repair and Reshape..
[   37.429437] systemd[1]: Starting RAID Resync Process. Including Resync, Repair and Reshape..
[   37.441190] systemd[1]: Created slice SynologyApplicationService's slice.
[   37.450701] systemd[1]: Starting SynologyApplicationService's slice.
[   37.460163] systemd[1]: Listening on udev Control Socket.
[   37.468424] systemd[1]: Starting udev Control Socket.
[   37.476701] systemd[1]: Created slice ScsiTarget's slice.
[   37.484803] systemd[1]: Starting ScsiTarget's slice.
[   37.492998] systemd[1]: Created slice OAuthService's slice.
[   37.501285] systemd[1]: Starting OAuthService's slice.
[   37.509625] systemd[1]: Created slice SNMP.
[   37.516501] systemd[1]: Starting SNMP.
[   37.523437] systemd[1]: Created slice Package Center Slice.
[   37.529499] systemd[1]: Starting Package Center Slice.
[   37.537872] systemd[1]: Created slice UniversalViewer's slice.
[   37.545621] systemd[1]: Starting UniversalViewer's slice.
[   37.554252] systemd[1]: Created slice SecureSignIn's slice.
[   37.562005] systemd[1]: Starting SecureSignIn's slice.
[   37.570355] systemd[1]: Created slice PlexMediaServer's slice.
[   37.578115] systemd[1]: Starting PlexMediaServer's slice.
[   37.586753] systemd[1]: Created slice Synology DSM Storage Service.
[   37.595208] systemd[1]: Starting Synology DSM Storage Service.
[   37.604314] systemd[1]: Created slice System Slice.
[   37.611804] systemd[1]: Starting System Slice.
[   37.641284] systemd[1]: Starting Load Kernel Modules...
[   37.648186] systemd[1]: Starting Set hostname...
[   37.655917] systemd[1]: Starting Journal Socket (/dev/log).
[   37.665390] systemd[1]: Starting Set boot sequence config...
[   37.673244] systemd[1]: Starting Set time zone information to kernel...
[   37.682859] systemd[1]: Starting unbind USB device...
[   37.691192] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   37.699058] systemd[1]: Starting system-serial\x2dgetty.slice.
[   37.709590] systemd[1]: Starting Link coredump path to volume if possible...
[   37.718073] systemd[1]: Started Set project quota ID for /var/log.
[   37.749622] systemd[1]: Mounting Temporary Directory...
[   37.757235] systemd[1]: Starting Load ntb_brd module...
[   37.765542] systemd[1]: Starting check integrity of rd.gz decompression...
[   37.774807] systemd[1]: Created slice r8152's slice.
[   37.780205] systemd[1]: Starting r8152's slice.
[   37.787764] systemd[1]: Reached target Swap.
[   37.794933] systemd[1]: Starting Swap.
[   37.801721] systemd[1]: Listening on udev Kernel Socket.
[   37.809889] systemd[1]: Starting udev Kernel Socket.
[   37.818341] systemd[1]: Created slice QuickConnect's slice.
[   37.826389] systemd[1]: Starting QuickConnect's slice.
[   37.834511] NET: Registered protocol family 10
[   37.841987] systemd[1]: Created slice Spreadsheet's slice.
[   37.850421] systemd[1]: Starting Spreadsheet's slice.
[   37.858090] systemd[1]: Created slice CloudSync's slice.
[   37.865135] systemd[1]: Starting CloudSync's slice.
[   37.871359] sit: IPv6 over IPv4 tunneling driver
[   37.878286] systemd[1]: Created slice User and Session Slice.
[   37.885611] systemd[1]: Starting User and Session Slice.
[   37.893947] systemd[1]: Reached target Slices.
[   37.899212] systemd[1]: Starting Slices.
[   37.906270] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[   37.923382] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   37.928917] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   37.951371] systemd[1]: Starting Synology swap...
[   37.956883] systemd[1]: Created slice Synology Swap Works.
[   37.964035] uhci_hcd: USB Universal Host Controller Interface driver
[   37.974250] systemd[1]: Starting Synology Swap Works.
[   37.982222] systemd[1]: Created slice synobackup daemon slice.
[   37.991089] systemd[1]: Starting synobackup daemon slice.
[   38.000861] systemd[1]: Mounting Debug File System...
[   38.008556] systemd[1]: Starting Disabling fan checking flag ......
[   38.015687] systemd[1]: Reached target Timers.
[   38.020785] systemd[1]: Starting Timers.
[   38.028106] systemd[1]: Created slice Synology Cache Advisor.
[   38.036399] systemd[1]: Starting Synology Cache Advisor.
[   38.045022] systemd[1]: Created slice SynologyDrive's slice.
[   38.053347] systemd[1]: Starting SynologyDrive's slice.
[   38.062116] systemd[1]: Created slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice.
[   38.072879] systemd[1]: Starting system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice.
[   38.081678] md: md1 stopped.
[   38.082666] md: bind<sdb2>
[   38.082834] md: bind<sda2>
[   38.098299] md/raid1:md1: active with 2 out of 2 mirrors
[   38.104269] systemd[1]: Created slice Synology DSM internal service.
[   38.112210] systemd[1]: Starting Synology DSM internal service.
[   38.158974] md1: detected capacity change from 0 to 2147418112
[   38.161167] systemd[1]: Starting Synology Plugin Daemon...
[   38.171154] systemd[1]: Created slice ActiveInsight's slice.
[   38.179363] systemd[1]: Starting ActiveInsight's slice.
[   38.189078] systemd[1]: Mounted Debug File System.
[   38.195330] systemd[1]: Mounted Temporary Directory.
[   38.204062] systemd[1]: Started Load Kernel Modules.
[   38.211761] systemd[1]: Started Set hostname.
[   38.218809] systemd[1]: Listening on Journal Socket (/dev/log).
[   38.228078] systemd[1]: Started Set boot sequence config.
[   38.236597] systemd[1]: Started Set time zone information to kernel.
[   38.245890] systemd[1]: Started unbind USB device.
[   38.254018] systemd[1]: Started Link coredump path to volume if possible.
[   38.263698] systemd[1]: Started Load ntb_brd module.
[   38.271466] systemd[1]: Started check integrity of rd.gz decompression.
[   38.281412] systemd[1]: Started Disabling fan checking flag ....
[   38.289918] systemd[1]: Started Synology Plugin Daemon.
[   38.299313] systemd[1]: Starting Journal Service...
[   38.305411] systemd[1]: Reached target Sockets.
[   38.312720] systemd[1]: Starting Sockets.
[   38.321190] systemd[1]: Starting Load Fan Modules in Kernel Project...
[   38.331272] systemd[1]: Mounting Configuration File System...
[   38.340123] systemd[1]: Starting Load Kernel Modules in Kernel Project...
[   38.347858] systemd[1]: Mounted FUSE Control File System.
[   38.358151] systemd[1]: Starting Apply default and user customized sysctl.conf kernel variable....
[   38.361944] usbcore: registered new interface driver usblp
[   38.378503] systemd[1]: Starting Adjust NIC sequence...
[   38.385424] systemd[1]: Reached target Local File Systems.
[   38.393346] systemd[1]: Starting Local File Systems.
[   38.403270] systemd[1]: Starting D-Bus System Message Bus...
[   38.412304] systemd[1]: Starting Set boot sequence config for temporary use...
[   38.422188] systemd[1]: Starting D-Bus Session Message Bus...
[   38.424144] usbcore: registered new interface driver usbhid
[   38.424145] usbhid: USB HID core driver
[   38.443390] systemd[1]: Starting udev Coldplug all Devices...
[   38.451595] synobios open /dev/ttyS1 success
[   38.452604] systemd[1]: Starting Mount usb fs...
[   38.464590] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k
[   38.475740] Synobios DS220j GPIO initialized
[   38.483159] synobios: load, major number 201
[   38.490112] Brand: Synology
[   38.492180] systemd[1]: Starting Mount efivarfs...
[   38.503594] Model: DS-220j
[   38.503604] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   38.503617] synobios cpu_arch proc entry initialized
[   38.503619] synobios crypto_hw proc entry initialized
[   38.503622] synobios syno_platform proc entry initialized
[   38.528391] syno_hddmon: module license 'Synology Inc.' taints kernel.
[   38.528393] Disabling lock debugging due to kernel taint
[   38.528805] Syno_HddMon: Initialization completed.
[   38.574480] systemd[1]: Mounted Configuration File System.
[   38.584730] systemd[1]: Started Journal Service.
[   38.590566] usbcore: registered new interface driver usb-storage
[   38.603865] usbcore: registered new interface driver uas
[   38.725009] systemd-journald[3141]: Received request to flush runtime journal from PID 1
[   43.493711] r8169 98016000.gmac eth0: rtl_csiar_cond == 0 (loop: 100, delay: 10).
[   43.502655] r8169 98016000.gmac eth0: rtl_csiar_cond == 1 (loop: 100, delay: 10).
[   43.511570] r8169 98016000.gmac eth0: link down
[   43.511591] r8169 98016000.gmac eth0: link down
[   43.552688] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   44.708124] 8021q: 802.1Q VLAN Support v1.8
[   45.642425] md: md2 stopped.
[   45.652721] md: bind<sdb5>
[   45.656062] md: bind<sda5>
[   45.667862] md/raid1:md2: active with 2 out of 2 mirrors
[   45.715902] md2: detected capacity change from 0 to 7990570516480
[   46.981255] r8169 98016000.gmac eth0: link up 1 Gbps
[   46.986364] r8169_reset_task: reset with slow event.
[   46.992078] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   47.035434] r8169 98016000.gmac eth0: rtl_csiar_cond == 0 (loop: 100, delay: 10).
[   47.044383] r8169 98016000.gmac eth0: rtl_csiar_cond == 1 (loop: 100, delay: 10).
[   47.053316] r8169 98016000.gmac eth0: link up 1 Gbps
[   49.873124] ip_tables: (C) 2000-2006 Netfilter Core Team
[   49.997464] audit: type=1325 audit(1712305182.579:2): table=filter family=2 entries=0
[   50.122131] usb 3-1: usb_reset_and_verify_device Failed to disable LTM
               .
[   50.124161] nf_conntrack version 0.5.0 (3877 buckets, 15508 max)
[   50.136649] usb usb3-port1: logical disconnect on port 1 [kworker/2:1]
[   50.381086] usb 3-1: USB disconnect, device number 2
[   50.561304] usb 3-1: new SuperSpeed USB device number 3 using xhci-hcd
[   51.002872] audit: type=1325 audit(1712305183.589:3): table=filter family=2 entries=4
[   51.042211] audit: type=1325 audit(1712305183.629:4): table=filter family=2 entries=8
[   51.452304] audit: type=1325 audit(1712305184.039:5): table=nat family=2 entries=0
[   52.933471] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl
[   54.383378] audit: type=1325 audit(1712305186.967:6): table=filter family=2 entries=9
[   54.406966] audit: type=1325 audit(1712305186.987:7): table=filter family=2 entries=8
[   54.467374] Module [xt_recent] is removed.
[   54.636720] Module [xt_iprange] is removed.
[   54.706583] Module [xt_limit] is removed.
[   54.754862] Module [xt_state] is removed.
[   54.813891] Module [xt_tcpudp] is removed.
[   54.876112] Module [xt_multiport] is removed.
[   55.014963] Module [xt_LOG] is removed.
[   55.084563] Module [iptable_filter] is removed.
[   58.416154] usb 3-1: usb_reset_and_verify_device Failed to disable LTM
               .
[   58.424533] usb usb3-port1: logical disconnect on port 1 [kworker/1:2]
[   58.651080] usb 3-1: USB disconnect, device number 3
[   58.821773] usb 3-1: new SuperSpeed USB device number 4 using xhci-hcd
[   60.951123] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use)
[   63.769754] Synotify use 16384 event queue size
[   64.088041] Synotify use 16384 event queue size
[   64.092789] Synotify use 16384 event queue size
[   65.338369] ata1.00: configured for UDMA/133
[   65.342792] ata1: EH complete
[   65.616056] ata2.00: configured for UDMA/133
[   65.620668] ata2: EH complete
[   67.491141] iSCSI:target_core_rodsp_server.c:1025:rodsp_server_init RODSP server started, login_key(9a822a2a5728).
[   67.623138] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized
[   67.952569] iSCSI:target_core_device.c:612:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
[   67.964782] iSCSI:target_core_configfs.c:5763:target_init_dbroot db_root: cannot open: /etc/target
[   67.974253] iSCSI:target_core_lunbackup.c:366:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
[   68.122505] iSCSI:target_core_file.c:152:fd_attach_hba RODSP plugin for fileio is enabled.
[   68.131000] iSCSI:target_core_file.c:159:fd_attach_hba ODX Token Manager is enabled.
[   68.138967] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled.
[   68.148168] iSCSI:target_core_ep.c:795:ep_attach_hba RODSP plugin for epio is enabled.
[   68.156273] iSCSI:target_core_ep.c:802:ep_attach_hba ODX Token Manager is enabled.
[   68.659448] workqueue: max_active 1024 requested for vhost_scsi is out of range, clamping between 1 and 512
[   69.579231] audit: type=1325 audit(1712305201.236:8): table=filter family=2 entries=0
[   70.150833] audit: type=1325 audit(1712305201.806:9): table=filter family=2 entries=4
[   70.181653] audit: type=1325 audit(1712305201.836:10): table=filter family=2 entries=8
[   73.102681] findhostd uses obsolete (PF_INET,SOCK_PACKET)
[   80.884503] audit: type=1325 audit(1712305212.536:11): table=filter family=2 entries=9
[   80.931166] audit: type=1325 audit(1712305212.586:12): table=filter family=2 entries=8
[   81.143431] Module [xt_recent] is removed.
[   81.372856] Module [xt_iprange] is removed.
[   81.602530] Module [xt_limit] is removed.
[   81.685120] Module [xt_state] is removed.
[   81.780058] Module [xt_tcpudp] is removed.
[   81.984138] Module [xt_multiport] is removed.
[   82.079639] Module [xt_LOG] is removed.
[   82.219116] Module [iptable_filter] is removed.
[   83.811136] usb 3-1: usb_reset_and_verify_device Failed to disable LTM
               .
[   83.819472] usb usb3-port1: logical disconnect on port 1 [kworker/1:2]
[   84.037828] usb 3-1: USB disconnect, device number 4
[   84.197905] usb 3-1: new SuperSpeed USB device number 5 using xhci-hcd
[   84.837130] usb 3-1: usb_reset_and_verify_device Failed to disable LTM
               .
[   84.845458] usb usb3-port1: logical disconnect on port 1 [kworker/0:0]
[   85.057813] usb 3-1: USB disconnect, device number 5
[   85.217834] usb 3-1: new SuperSpeed USB device number 6 using xhci-hcd
[   87.554604] r8152: module verification failed: signature and/or required key missing - tainting kernel
[   87.570664] usbcore: registered new interface driver r8152
[   87.793422] usb 3-1: reset SuperSpeed USB device number 6 using xhci-hcd
[   87.887959] netif_napi_add() called with weight 256 on device eth%d
[   87.894909] r8152 3-1:1.0 eth1: v2.17.1 (2023/06/13)
[   87.900017] r8152 3-1:1.0 eth1: This product is covered by one or more of the following patents:
                        US6,570,884, US6,115,776, and US6,327,625.

[   87.915973] r8152 3-1:1.0 eth1: chip rev 14
[   87.920274] r8152 3-1:1.0 eth1: rx_buf_sz will be overridden to 8192
[   88.964822] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   94.322686] audit: type=1325 audit(1712305225.976:13): table=filter family=2 entries=0
[   94.961357] xhci-hcd xhci-hcd.2.auto: WARN: HC couldn't access mem fast enough
[   94.968780] r8152 3-1:1.0 eth1: intr status -63
[  103.793405] xhci-hcd xhci-hcd.2.auto: WARN: HC couldn't access mem fast enough
[  103.800832] r8152 3-1:1.0 eth1: intr status -63
[  105.111333] usb 3-1: usb_reset_and_verify_device Failed to disable LTM
               .
[  105.119690] usb usb3-port1: logical disconnect on port 1 [kworker/0:1]
[  105.126525] r8152 3-1:1.0 eth1: get_registers -19
[  105.131419] r8152 3-1:1.0 eth1: Get ether addr fail
[  105.337730] usb 3-1: USB disconnect, device number 6
[  105.547790] usb 3-1: new SuperSpeed USB device number 7 using xhci-hcd
[  105.809492] usb 3-1: reset SuperSpeed USB device number 7 using xhci-hcd
[  105.878593] r8152 3-1:1.0 eth1: v2.17.1 (2023/06/13)
[  105.883692] r8152 3-1:1.0 eth1: This product is covered by one or more of the following patents:
                        US6,570,884, US6,115,776, and US6,327,625.

[  105.899673] r8152 3-1:1.0 eth1: chip rev 14
[  105.903961] r8152 3-1:1.0 eth1: rx_buf_sz will be overridden to 8192
[  106.050117] Synotify use 16384 event queue size
[  106.054878] Synotify use 16384 event queue size
[  106.587634] fuse init (API version 7.23)
[  115.937596] audit: type=1325 audit(1712305247.586:14): table=filter family=2 entries=4
[  115.960728] audit: type=1325 audit(1712305247.616:15): table=filter family=2 entries=8
[  116.477152] audit: type=1325 audit(1712305248.126:16): table=filter family=2 entries=9
[  116.821875] audit: type=1325 audit(1712305248.476:17): table=filter family=2 entries=8
[  117.308086] Module [xt_recent] is removed.
[  117.412768] Module [xt_iprange] is removed.
[  117.493109] Module [xt_limit] is removed.
[  117.668531] Module [xt_state] is removed.
[  117.732308] Module [xt_tcpudp] is removed.
[  117.792079] Module [xt_multiport] is removed.
[  117.879369] Module [xt_LOG] is removed.
[  117.978477] Module [iptable_filter] is removed.
[  134.292239] usb 3-1: usb_reset_and_verify_device Failed to disable LTM
               .
[  134.300556] usb usb3-port1: logical disconnect on port 1 [kworker/3:4]
[  134.307263] r8152 3-1:1.0 eth1: get_registers -19
[  134.312092] r8152 3-1:1.0 eth1: Get ether addr fail
[  134.528286] usb 3-1: USB disconnect, device number 7
[  134.758274] usb 3-1: new SuperSpeed USB device number 8 using xhci-hcd
[  135.089612] usb 3-1: reset SuperSpeed USB device number 8 using xhci-hcd
[  135.159242] r8152 3-1:1.0 eth1: v2.17.1 (2023/06/13)
[  135.164351] r8152 3-1:1.0 eth1: This product is covered by one or more of the following patents:
                        US6,570,884, US6,115,776, and US6,327,625.

[  135.180330] r8152 3-1:1.0 eth1: chip rev 14
[  135.184618] r8152 3-1:1.0 eth1: rx_buf_sz will be overridden to 8192
[  138.696245] usb 3-1: usb_reset_and_verify_device Failed to disable LTM
               .
[  138.704556] usb usb3-port1: logical disconnect on port 1 [kworker/2:3]
[  138.711276] r8152 3-1:1.0 eth1: get_registers -19
[  138.716099] r8152 3-1:1.0 eth1: Get ether addr fail
[  138.928442] usb 3-1: USB disconnect, device number 8
[  139.138570] usb 3-1: new SuperSpeed USB device number 9 using xhci-hcd
[  139.488596] usb 3-1: reset SuperSpeed USB device number 9 using xhci-hcd
[  140.613117] Synotify use 16384 event queue size
[  146.068887] usb 3-1: reset SuperSpeed USB device number 9 using xhci-hcd
[  151.799198] usb 3-1: reset SuperSpeed USB device number 9 using xhci-hcd
[  186.100783] usb 3-1: reset SuperSpeed USB device number 9 using xhci-hcd
[  195.120526] usb 3-1: reset SuperSpeed USB device number 9 using xhci-hcd
[  203.309964] usb 3-1: reset SuperSpeed USB device number 9 using xhci-hcd
[  207.609600] usb 3-1: reset SuperSpeed USB device number 9 using xhci-hcd
[  210.589430] usb 3-1: reset SuperSpeed USB device number 9 using xhci-hcd
[  212.785362] usb 3-1: USB disconnect, device number 9
[  221.568566] usb 5-1: new SuperSpeed USB device number 2 using xhci-hcd
[  221.826748] usb 5-1: reset SuperSpeed USB device number 2 using xhci-hcd
[  221.919374] r8152 5-1:1.0 eth1: v2.17.1 (2023/06/13)
[  221.924484] r8152 5-1:1.0 eth1: This product is covered by one or more of the following patents:
                        US6,570,884, US6,115,776, and US6,327,625.

[  221.940438] r8152 5-1:1.0 eth1: chip rev 14
[  221.944729] r8152 5-1:1.0 eth1: rx_buf_sz will be overridden to 8192
[  223.748146] usb 5-1: USB disconnect, device number 2
[  255.163309] Synotify use 16384 event queue size
[  279.951414] Synotify use 16384 event queue size
[  279.956164] Synotify use 16384 event queue size
[  336.153971] usb 5-1: new SuperSpeed USB device number 3 using xhci-hcd
[  336.419189] usb 5-1: reset SuperSpeed USB device number 3 using xhci-hcd
[  336.514555] r8152 5-1:1.0 eth1: v2.17.1 (2023/06/13)
[  336.519654] r8152 5-1:1.0 eth1: This product is covered by one or more of the following patents:
                        US6,570,884, US6,115,776, and US6,327,625.

[  336.535639] r8152 5-1:1.0 eth1: chip rev 14
[  336.539929] r8152 5-1:1.0 eth1: rx_buf_sz will be overridden to 8192
[  558.033443] Module [r8152] is removed.
[  558.037390] usbcore: deregistering interface driver r8152
[ 1031.365817] usb 5-1: reset SuperSpeed USB device number 3 using xhci-hcd
[ 1031.450988] r8152 5-1:1.0 eth1: v2.17.1 (2023/06/13)
[ 1031.456082] r8152 5-1:1.0 eth1: This product is covered by one or more of the following patents:
                        US6,570,884, US6,115,776, and US6,327,625.

[ 1031.472061] r8152 5-1:1.0 eth1: chip rev 14
[ 1031.476426] usbcore: registered new interface driver r8152
[ 1033.959657] Module [r8152] is removed.
[ 1033.963686] usbcore: deregistering interface driver r8152
[ 1087.910036] usb 5-1: reset SuperSpeed USB device number 3 using xhci-hcd
[ 1087.989976] r8152 5-1:1.0 eth1: v2.17.1 (2023/06/13)
[ 1087.995079] r8152 5-1:1.0 eth1: This product is covered by one or more of the following patents:
                        US6,570,884, US6,115,776, and US6,327,625.

[ 1088.011051] r8152 5-1:1.0 eth1: chip rev 14
[ 1088.015441] usbcore: registered new interface driver r8152
[ 1090.416480] Module [r8152] is removed.
[ 1090.420455] usbcore: deregistering interface driver r8152
[ 1188.380026] usb 5-1: usb_reset_and_verify_device Failed to disable LTM
               .
[ 1188.388330] usb usb5-port1: logical disconnect on port 1 [kworker/3:3]
[ 1188.494924] xhci-hcd xhci-hcd.5.auto: device is plugged out, empty URBs
[ 1191.397065] usb 5-1: USB disconnect, device number 3
[ 1229.075041] usbcore: registered new interface driver r8152
[ 1322.524520] usb 5-1: new SuperSpeed USB device number 5 using xhci-hcd
[ 1322.790936] usb 5-1: reset SuperSpeed USB device number 5 using xhci-hcd
[ 1322.885185] r8152 5-1:1.0 eth1: v2.17.1 (2023/06/13)
[ 1322.890290] r8152 5-1:1.0 eth1: This product is covered by one or more of the following patents:
                        US6,570,884, US6,115,776, and US6,327,625.

[ 1322.906236] r8152 5-1:1.0 eth1: chip rev 14
[ 1344.529984] Module [r8152] is removed.
[ 1344.533926] usbcore: deregistering interface driver r8152
[ 1360.071111] usb 5-1: reset SuperSpeed USB device number 5 using xhci-hcd
[ 1360.155837] r8152 5-1:1.0 eth1: v2.17.1 (2023/06/13)
[ 1360.160952] r8152 5-1:1.0 eth1: This product is covered by one or more of the following patents:
                        US6,570,884, US6,115,776, and US6,327,625.

[ 1360.176995] r8152 5-1:1.0 eth1: chip rev 14
[ 1360.181484] usbcore: registered new interface driver r8152
[ 1362.185696] Module [r8152] is removed.
[ 1362.189637] usbcore: deregistering interface driver r8152
[ 1386.191627] usb 5-1: USB disconnect, device number 5
[ 1402.803544] usbcore: registered new interface driver r8152
[ 1501.981164] usb 5-1: new SuperSpeed USB device number 6 using xhci-hcd
[ 1502.247629] usb 5-1: reset SuperSpeed USB device number 6 using xhci-hcd
[ 1502.341828] r8152 5-1:1.0 eth1: v2.17.1 (2023/06/13)
[ 1502.346926] r8152 5-1:1.0 eth1: This product is covered by one or more of the following patents:
                        US6,570,884, US6,115,776, and US6,327,625.

[ 1502.362881] r8152 5-1:1.0 eth1: chip rev 14
knobler@DS220j:~$
[dmesg_output.txt](https://github.com/bb-qq/r8152/files/14882626/dmesg_output.txt)

Output of lsusb command

 lsusb
|__usb2          1d6b:0002:0404 09  2.00  480MBit/s 0mA 1IF  (Linux 4.4.302+ xhci-hcd xHCI Host Controller xhci-hcd.2.auto) hub
|__usb3          1d6b:0003:0404 09  3.00 5000MBit/s 0mA 1IF  (Linux 4.4.302+ xhci-hcd xHCI Host Controller xhci-hcd.2.auto) hub
|__usb4          1d6b:0002:0404 09  2.00  480MBit/s 0mA 1IF  (Linux 4.4.302+ xhci-hcd xHCI Host Controller xhci-hcd.5.auto) hub
|__usb5          1d6b:0003:0404 09  3.00 5000MBit/s 0mA 1IF  (Linux 4.4.302+ xhci-hcd xHCI Host Controller xhci-hcd.5.auto) hub
  |__5-1         0bda:8156:3104 00  3.20 5000MBit/s 256mA 1IF  (Realtek USB 10/100/1G/2.5G LAN 4013000001)

Output of ifconfig -a command

 ifconfig -a
eth0      Link encap:Ethernet  HWaddr 90:09:D0:0B:7B:3C
          inet addr:192.168.1.52  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fdaa:bbcc:ddee:0:9209:d0ff:fe0b:7b3c/64 Scope:Global
          inet6 addr: 2a02:14c:5500:b00:9209:d0ff:fe0b:7b3c/64 Scope:Global
          inet6 addr: fe80::9209:d0ff:fe0b:7b3c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:29943 errors:0 dropped:0 overruns:0 frame:0
          TX packets:25388 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:10484143 (9.9 MiB)  TX bytes:11411264 (10.8 MiB)
          Interrupt:11

eth1      Link encap:Ethernet  HWaddr 80:3F:5D:F8:D4:20
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:4626 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4626 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:1274655 (1.2 MiB)  TX bytes:1274655 (1.2 MiB)

sit0      Link encap:IPv6-in-IPv4
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
ziv01 commented 7 months ago

UPDATE: 2.17.1-1 clean istallation wored but NIC keep disconnecting 2.17.1.-2 complete the clean installation but won't start updating from 2.17.1-1 to 2.17.1.-2 will render the USB NIC usles and I can't see it connected at all.

This one is with 2.17.1-1 clean install before it disconnect

bb-qq commented 6 months ago

Unfortunately, stability issues are observed in this platform. For details, please take a look at this issue. https://github.com/bb-qq/r8152/issues/275

bb-qq commented 6 months ago

I merge topics on rtd1296 into issue https://github.com/bb-qq/r8152/issues/275. If you notice anything new, please comment there.