bb-qq
commented
4 years ago I added a driver for monaco. Please let me know the result.
Closed leriton10 closed 4 years ago
leriton10
commented
4 years ago Thank you very much !! No problem with the installation. But I don't see the new interface in the Web GUI. I tried the command "sudo ifconfig tun0 up" but nothing changed
This is what I get with ifconfig: eth0 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx inet addr:192.168.10.15 Bcast:192.168.10.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:348041 errors:0 dropped:0 overruns:0 frame:0 TX packets:290628 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:114589544 (109.2 MiB) TX bytes:143035205 (136.4 MiB) Interrupt:130
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:14298 errors:0 dropped:0 overruns:0 frame:0 TX packets:14298 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2466580 (2.3 MiB) TX bytes:2466580 (2.3 MiB)
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
thanks
bb-qq
commented
4 years ago Did you see eth1 in the result of ifconfig -a?
If not, please paste the results of dmesg and lsusb again.
leriton10
commented
4 years ago It works !! Thank you !! I was confuse by the tun0 interface but doing ifconf -a showed me the eth1 interface. I just did a "sudo ifconfig eth1 up" and it appeared in the Web GUI
Thank you very much !! Out of curiosity, how do compile your application ? I did tried to compile your driver with spksrc (https://github.com/SynoCommunity/spksrc) before bothering you but I did not succeded. I'm just asking because I have a pretty rare processor for a synology and I'm often block by missing release. If you don't have the time I understand.
Thanks again !!
bb-qq
commented
4 years ago I am using these scripts to build packages. https://github.com/SynologyOpenSource/pkgscripts-ng
And instructions to build are described here. https://originhelp.synology.com/developer-guide/create_package/summary.html
leriton10
commented
4 years ago Thank you very much !
bb-qq
commented
4 years ago I believe this issue is resolved. Please feel free to reopen the issue if something remains.
Description of the problem
Is it possible to get the driver for a Synology DS216play ? It seems to be a monaco procesor Thank you
Description of your products
Description of your environment
Output of
dmesgcommand[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.10.105 (root@build1) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #24922 SMP Tue Jul 9 18:27:16 CST 2019 [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: STi SoC with Flattened Device Tree, model: STiH410 B2120 [ 0.000000] Ignoring memory below PHYS_OFFSET: 0x40000000-0x43000000 [ 0.000000] Ignoring memory below PHYS_OFFSET: 0x42000000-0x43000000 [ 0.000000] cma: CMA: reserved 16 MiB at 5f000000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 118784 [ 0.000000] free_area_init_node: node 0, pgdat 806ddf40, node_mem_map 8073b000 [ 0.000000] Normal zone: 928 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 118784 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 7 pages/cpu @80b29000 s6976 r8192 d13504 u32768 [ 0.000000] pcpu-alloc: s6976 r8192 d13504 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 117856 [ 0.000000] Kernel command line: console=ttyS0,115200 CONSOLE=/dev/ttyS0 ip=off mtdparts=stm-nand-bch.0:0x500000(boot),-(rfs) bpa2parts=BPA2_Region|aud-coded|aud-transcoded|vid-coded|vid-transcoded|vid-raw-input|vid-output-0|vid-decimated-1|vid-copied-1|vid-macroblock-0|vid-extra-data-0|vid-extra-data-1|v4l2-coded-video-buffers|vid-enc-data-0|vid-enc-scaled-0|vid-encoded-0|v4l2-clut|v4l2-grab|gfx-memory|aud-codec-data|vid-codec-data|aud-output-0|aud-output-1|vid-output-1|vid-decimated-0|vid-copied-0|vid-macroblock-1|blitter|vid-enc-data-1|vid-enc-scaled-1|vid-encoded-1|coredisplay-video|multicom|hades-l3|BPA2_Region0|BPA2_Region1:480M:0x62000000,v4l2-vb2|v4l2-stmc8jpg|v4l2-stmvout|v4l2-compo:24M:0x60800000,coprocs:32M:0x40000000,modules|audio:8M:0x60000000,bigphysarea|te-buffers|m2m-ca3:48M:0x48000000,STMCReserve:32768:0x47FF8000 vmalloc=775m mem=503316480@0x42000000 root=/dev/md0 rw syno_hw_version=DS216play hd_power_on_seq=2 ihd_num=2 netif_num=1 flash_size=8 phys_memsize=1024 rev=r1 [ 0.000000] bpa2: partition 'BPA2_Region' created at 0x62000000 (high), size 491520 kB (0x1e000000 B) [ 0.000000] bpa2: partition 'v4l2-vb2' created at 0x60800000 (high), size 24576 kB (0x01800000 B) [ 0.000000] bpa2: partition 'coprocs' created at 0x40000000 (high), size 32768 kB (0x02000000 B) [ 0.000000] bpa2: partition 'modules' created at 0x60000000 (high), size 8192 kB (0x00800000 B) [ 0.000000] bpa2: partition 'bigphysarea' created at 0x48000000 (low), size 49152 kB (0x03000000 B) [ 0.000000] bpa2: partition 'STMCReserve' created at 0x47ff8000 (low), size 32 kB (0x00008000 B) [ 0.000000] Synology Hardware Version: DS216play-j [ 0.000000] Internal HD num: 2 [ 0.000000] Internal netif num: 1 [ 0.000000] Synology Hardware Revision: r1 [ 0.000000] SYNO Transcoding Memory Mode: 3 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 464MB = 464MB total [ 0.000000] Memory: 393428k/393428k available, 81708k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0x9d800000 - 0xff000000 (1560 MB) lowmem : 0x80000000 - 0x9d000000 ( 464 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x80008000 - 0x80665b18 (6519 kB) .init : 0x80666000 - 0x806a0b40 ( 235 kB) .data : 0x806a2000 - 0x806dea00 ( 243 kB) .bss : 0x806dea00 - 0x8073ac24 ( 369 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] st-lpc: lpc_clk running @ 30000000 Hz [ 0.000000] sched_clock: 32 bits at 30MHz, resolution 33ns, wraps every 143165ms [ 0.000000] st-lpc: clocksource initialised: iomem: 9d81c000 [ 0.000000] L310 cache controller enabled [ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x10480000, Cache size: 1048576 B [ 0.000000] Console: colour dummy device 80x30 [ 0.001789] Calibrating delay loop... 2996.63 BogoMIPS (lpj=14983168) [ 0.060214] pid_max: default: 32768 minimum: 301 [ 0.060283] Security Framework initialized [ 0.060299] AppArmor: AppArmor initialized [ 0.060326] Mount-cache hash table entries: 512 [ 0.060680] CPU: Testing write buffer coherency: ok [ 0.060986] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.061564] Setting up static identity map for 0x804c6c50 - 0x804c6d2c [ 0.062011] CPU1: Booted secondary processor [ 0.120234] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.120284] Brought up 2 CPUs [ 0.120294] SMP: Total of 2 processors activated (5985.89 BogoMIPS). [ 0.120297] CPU: All CPU(s) started in SVC mode. [ 0.120650] devtmpfs: initialized [ 0.123789] xor: measuring software checksum speed [ 0.220222] arm4regs : 2325.200 MB/sec [ 0.320221] 8regs : 1668.400 MB/sec [ 0.420221] 32regs : 1695.200 MB/sec [ 0.420226] xor: using function: arm4regs (2325.200 MB/sec) [ 0.420233] pinctrl core: initialized pinctrl subsystem [ 0.420581] regulator-dummy: no parameters [ 0.421179] NET: Registered protocol family 16 [ 0.424382] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.428552] syscon 9620000.sbc-syscfg: regmap [mem 0x09620000-0x09620fff] registered [ 0.428693] syscon 9280000.front-syscfg: regmap [mem 0x09280000-0x09280fff] registered [ 0.428819] syscon 9290000.rear-syscfg: regmap [mem 0x09290000-0x09290fff] registered [ 0.428936] syscon 92a0000.flash-syscfg: regmap [mem 0x092a0000-0x092a0fff] registered [ 0.429067] syscon 9600000.fvdp-lite-syscfg: regmap [mem 0x09600000-0x09600fff] registered [ 0.429186] syscon 92b0000.core-syscfg: regmap [mem 0x092b0000-0x092b0fff] registered [ 0.429309] syscon 94b5100.lpm-syscfg: regmap [mem 0x094b5100-0x094b60ff] registered [ 0.442684] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.442692] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.442847] st-pinctrl 961f080.pin-controller-sbc: nbanks = 6 [ 0.442853] st-pinctrl 961f080.pin-controller-sbc: nfunctions = 14 [ 0.442859] st-pinctrl 961f080.pin-controller-sbc: ngroups = 27 [ 0.443006] st-pinctrl 961f080.pin-controller-sbc: PIO0 bank added. [ 0.443181] st-pinctrl 961f080.pin-controller-sbc: PIO1 bank added. [ 0.443341] st-pinctrl 961f080.pin-controller-sbc: PIO2 bank added. [ 0.443509] st-pinctrl 961f080.pin-controller-sbc: PIO3 bank added. [ 0.443666] st-pinctrl 961f080.pin-controller-sbc: PIO4 bank added. [ 0.443826] st-pinctrl 961f080.pin-controller-sbc: PIO5 bank added. [ 0.443912] st-pinctrl 961f080.pin-controller-sbc: Function[0 name:wakeup-pin, groups:1] [ 0.443922] st-pinctrl 961f080.pin-controller-sbc: Function[1 name:rc, groups:1] [ 0.443932] st-pinctrl 961f080.pin-controller-sbc: Function[2 name:sbc_serial0, groups:1] [ 0.443942] st-pinctrl 961f080.pin-controller-sbc: Function[3 name:sbc_serial1, groups:1] [ 0.443952] st-pinctrl 961f080.pin-controller-sbc: Function[4 name:i2c10, groups:1] [ 0.443962] st-pinctrl 961f080.pin-controller-sbc: Function[5 name:i2c11, groups:1] [ 0.443977] st-pinctrl 961f080.pin-controller-sbc: Function[6 name:keyscan, groups:1] [ 0.444031] st-pinctrl 961f080.pin-controller-sbc: Function[7 name:gmac1, groups:8] [ 0.444045] st-pinctrl 961f080.pin-controller-sbc: Function[8 name:pwm1, groups:4] [ 0.444059] st-pinctrl 961f080.pin-controller-sbc: Function[9 name:spi10, groups:2] [ 0.444072] st-pinctrl 961f080.pin-controller-sbc: Function[10 name:spi11, groups:2] [ 0.444085] st-pinctrl 961f080.pin-controller-sbc: Function[11 name:spi12, groups:2] [ 0.444094] st-pinctrl 961f080.pin-controller-sbc: Function[12 name:cec0, groups:1] [ 0.444112] st-pinctrl 961f080.pin-controller-sbc: Function[13 name:hdmirx0, groups:1] [ 0.444211] st-pinctrl 920f080.pin-controller-front0: nbanks = 10 [ 0.444217] st-pinctrl 920f080.pin-controller-front0: nfunctions = 24 [ 0.444223] st-pinctrl 920f080.pin-controller-front0: ngroups = 53 [ 0.444366] st-pinctrl 920f080.pin-controller-front0: PIO10 bank added. [ 0.444529] st-pinctrl 920f080.pin-controller-front0: PIO11 bank added. [ 0.444693] st-pinctrl 920f080.pin-controller-front0: PIO12 bank added. [ 0.444863] st-pinctrl 920f080.pin-controller-front0: PIO13 bank added. [ 0.445026] st-pinctrl 920f080.pin-controller-front0: PIO14 bank added. [ 0.445191] st-pinctrl 920f080.pin-controller-front0: PIO15 bank added. [ 0.445358] st-pinctrl 920f080.pin-controller-front0: PIO16 bank added. [ 0.445517] st-pinctrl 920f080.pin-controller-front0: PIO17 bank added. [ 0.445681] st-pinctrl 920f080.pin-controller-front0: PIO18 bank added. [ 0.445847] st-pinctrl 920f080.pin-controller-front0: PIO19 bank added. [ 0.445943] st-pinctrl 920f080.pin-controller-front0: Function[0 name:serial0, groups:4] [ 0.445962] st-pinctrl 920f080.pin-controller-front0: Function[1 name:serial1, groups:4] [ 0.445981] st-pinctrl 920f080.pin-controller-front0: Function[2 name:serial2, groups:1] [ 0.446002] st-pinctrl 920f080.pin-controller-front0: Function[3 name:mmc1, groups:1] [ 0.446014] st-pinctrl 920f080.pin-controller-front0: Function[4 name:i2c0, groups:1] [ 0.446025] st-pinctrl 920f080.pin-controller-front0: Function[5 name:i2c1, groups:1] [ 0.446035] st-pinctrl 920f080.pin-controller-front0: Function[6 name:i2c2, groups:1] [ 0.446052] st-pinctrl 920f080.pin-controller-front0: Function[7 name:i2c3, groups:3] [ 0.446076] st-pinctrl 920f080.pin-controller-front0: Function[8 name:spi0, groups:4] [ 0.446099] st-pinctrl 920f080.pin-controller-front0: Function[9 name:spi1, groups:4] [ 0.446129] st-pinctrl 920f080.pin-controller-front0: Function[10 name:spi2, groups:6] [ 0.446160] st-pinctrl 920f080.pin-controller-front0: Function[11 name:spi3, groups:6] [ 0.446181] st-pinctrl 920f080.pin-controller-front0: Function[12 name:systrace, groups:1] [ 0.446190] st-pinctrl 920f080.pin-controller-front0: Function[13 name:scr0, groups:1] [ 0.446199] st-pinctrl 920f080.pin-controller-front0: Function[14 name:scr1, groups:1] [ 0.446229] st-pinctrl 920f080.pin-controller-front0: Function[15 name:tsin0, groups:2] [ 0.446259] st-pinctrl 920f080.pin-controller-front0: Function[16 name:tsin1, groups:2] [ 0.446288] st-pinctrl 920f080.pin-controller-front0: Function[17 name:tsin2, groups:2] [ 0.446302] st-pinctrl 920f080.pin-controller-front0: Function[18 name:tsin3, groups:1] [ 0.446317] st-pinctrl 920f080.pin-controller-front0: Function[19 name:tsin4, groups:1] [ 0.446338] st-pinctrl 920f080.pin-controller-front0: Function[20 name:tsin5, groups:2] [ 0.446368] st-pinctrl 920f080.pin-controller-front0: Function[21 name:tsout0, groups:2] [ 0.446382] st-pinctrl 920f080.pin-controller-front0: Function[22 name:tsout1, groups:1] [ 0.446404] st-pinctrl 920f080.pin-controller-front0: Function[23 name:mtsin0, groups:1] [ 0.446495] st-pinctrl 921f080.pin-controller-front1: nbanks = 1 [ 0.446501] st-pinctrl 921f080.pin-controller-front1: nfunctions = 1 [ 0.446507] st-pinctrl 921f080.pin-controller-front1: ngroups = 1 [ 0.446652] st-pinctrl 921f080.pin-controller-front1: PIO20 bank added. [ 0.446755] st-pinctrl 921f080.pin-controller-front1: Function[0 name:tsin4, groups:1] [ 0.446831] st-pinctrl 922f080.pin-controller-rear: nbanks = 6 [ 0.446838] st-pinctrl 922f080.pin-controller-rear: nfunctions = 11 [ 0.446843] st-pinctrl 922f080.pin-controller-rear: ngroups = 17 [ 0.446989] st-pinctrl 922f080.pin-controller-rear: PIO30 bank added. [ 0.447167] st-pinctrl 922f080.pin-controller-rear: PIO31 bank added. [ 0.447332] st-pinctrl 922f080.pin-controller-rear: PIO32 bank added. [ 0.447489] st-pinctrl 922f080.pin-controller-rear: PIO33 bank added. [ 0.447666] st-pinctrl 922f080.pin-controller-rear: PIO34 bank added. [ 0.447832] st-pinctrl 922f080.pin-controller-rear: PIO35 bank added. [ 0.448068] st-pinctrl 922f080.pin-controller-rear: Function[0 name:dvo, groups:2] [ 0.448083] st-pinctrl 922f080.pin-controller-rear: Function[1 name:i2c4, groups:1] [ 0.448096] st-pinctrl 922f080.pin-controller-rear: Function[2 name:i2c5, groups:1] [ 0.448109] st-pinctrl 922f080.pin-controller-rear: Function[3 name:usb0, groups:1] [ 0.448123] st-pinctrl 922f080.pin-controller-rear: Function[4 name:usb1, groups:1] [ 0.448143] st-pinctrl 922f080.pin-controller-rear: Function[5 name:usb3, groups:1] [ 0.448155] st-pinctrl 922f080.pin-controller-rear: Function[6 name:pwm0, groups:1] [ 0.448190] st-pinctrl 922f080.pin-controller-rear: Function[7 name:spi4, groups:4] [ 0.448227] st-pinctrl 922f080.pin-controller-rear: Function[8 name:i2s_out, groups:2] [ 0.448264] st-pinctrl 922f080.pin-controller-rear: Function[9 name:i2s_in, groups:2] [ 0.448275] st-pinctrl 922f080.pin-controller-rear: Function[10 name:spdif_out, groups:1] [ 0.448369] st-pinctrl 923f080.pin-controller-flash: nbanks = 3 [ 0.448375] st-pinctrl 923f080.pin-controller-flash: nfunctions = 3 [ 0.448381] st-pinctrl 923f080.pin-controller-flash: ngroups = 3 [ 0.448514] st-pinctrl 923f080.pin-controller-flash: PIO40 bank added. [ 0.448683] st-pinctrl 923f080.pin-controller-flash: PIO41 bank added. [ 0.448853] st-pinctrl 923f080.pin-controller-flash: PIO42 bank added. [ 0.448978] st-pinctrl 923f080.pin-controller-flash: Function[0 name:mmc0, groups:1] [ 0.449008] st-pinctrl 923f080.pin-controller-flash: Function[1 name:fsm, groups:1] [ 0.449070] st-pinctrl 923f080.pin-controller-flash: Function[2 name:nand, groups:1] [ 0.450961] reset-stih407 powerdown-controller.8: registered [ 0.452683] reset-stih407 softreset-controller.10: registered [ 0.452880] reset-stih407 picophyreset-controller.11: registered [ 0.455705] st-clk clocks.0: SoC clock tree intialized [ 0.466087] bio: create slab at 0
[ 0.630480] raid6: int32x1 gen() 241 MB/s
[ 0.800386] raid6: int32x1 xor() 176 MB/s
[ 0.970411] raid6: int32x2 gen() 326 MB/s
[ 1.140259] raid6: int32x2 xor() 216 MB/s
[ 1.310383] raid6: int32x4 gen() 314 MB/s
[ 1.480281] raid6: int32x4 xor() 218 MB/s
[ 1.650241] raid6: int32x8 gen() 350 MB/s
[ 1.820316] raid6: int32x8 xor() 221 MB/s
[ 1.820321] raid6: using algorithm int32x8 gen() (350 MB/s)
[ 1.820325] raid6: .... xor() 221 MB/s, rmw enabled
[ 1.820328] raid6: using intx1 recovery algorithm
[ 1.820585] st-fdma 8e20000.fdma-mpe: IRQ: 37
[ 1.820603] st-fdma 8e20000.fdma-mpe: Base address: 9d8c0000
[ 1.822198] st-fdma 8e40000.fdma-mpe: IRQ: 39
[ 1.822212] st-fdma 8e40000.fdma-mpe: Base address: 9d9c0000
[ 1.823729] st-fdma 8e60000.fdma-mpe: IRQ: 41
[ 1.823754] st-fdma 8e60000.fdma-mpe: Base address: 9da00000
[ 1.825528] vmmc0: at 3300 mV
[ 1.825575] st-vsense 9061004.voltage-regulator: vmmc0 vsense voltage regulator registered
[ 1.825934] vgaarb: loaded
[ 1.826225] SCSI subsystem initialized
[ 1.826437] libata version 3.00 loaded.
[ 1.826673] media: Linux media interface: v0.10
[ 1.826735] Linux video capture interface: v2.00
[ 1.826944] pps_core: LinuxPPS API ver. 1 registered
[ 1.826950] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 1.827000] PTP clock support registered
[ 1.827918] Switching to clocksource st-lpc clocksource
[ 1.828181] AppArmor: AppArmor Filesystem Enabled
[ 1.837304] NET: Registered protocol family 2
[ 1.837685] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 1.837724] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 1.837759] TCP: Hash tables configured (established 4096 bind 4096)
[ 1.837800] TCP: reno registered
[ 1.837807] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 1.837827] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 1.837999] NET: Registered protocol family 1
[ 1.838155] RPC: Registered named UNIX socket transport module.
[ 1.838160] RPC: Registered udp transport module.
[ 1.838164] RPC: Registered tcp transport module.
[ 1.838167] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.838174] PCI: CLS 0 bytes, default 64
[ 1.838279] Trying to unpack rootfs image as initramfs...
[ 3.169683] Freeing initrd memory: 4048K (80c0a000 - 80ffe000)
[ 3.171679] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 3.173120] sti pm: Copying poke table & poke loop to buffer
[ 3.173130] sti pm: entering prepare:CONTROLLER PASSIVE STANDBY
[ 3.173136] sti pm: support mode: CONTROLLER PASSIVE STANDBY
[ 3.173139] sti pm: Suspend support registered
[ 3.173298] synology : fan ctrl initialized.
[ 3.173308] synology : fan sense initialized.
[ 3.173321] synology : sata power initialized.
[ 3.173337] synology : model id initialized.
[ 3.173345] synology : disk led ctrl initialized.
[ 3.173353] synology : phy led ctrl initialized.
[ 3.174638] Initialise module verification
[ 3.174674] audit: initializing netlink socket (disabled)
[ 3.174697] type=2000 audit(3.160:1): initialized
[ 3.221752] st-pinctrl 920f080.pin-controller-front0: maps: function systrace group systrace-default num 6
[ 3.221867] stm-systrace 9180000.systrace: Systrace: syscfg0=0x003f0000 (prev: 0x003f0000)
[ 3.221878] stm-systrace 9180000.systrace: Systrace: syscfg1=0x00580058 (prev: 0x00580058)
[ 3.221887] stm-systrace 9180000.systrace: Systrace: syscfg2=0x00990098 (prev: 0x00990098)
[ 3.221896] stm-systrace 9180000.systrace: Systrace: syscfg3=0x00530050 (prev: 0x00530050)
[ 3.221904] stm-systrace 9180000.systrace: Systrace: syscfg4=0x00550054 (prev: 0x00550054)
[ 3.221913] stm-systrace 9180000.systrace: Systrace: syscfg5=0x00570056 (prev: 0x00570056)
[ 3.221922] stm-systrace 9180000.systrace: Systrace: syscfg6=0x03ff03ff (prev: 0x03ff0000)
[ 3.221932] stm-systrace 9180000.systrace: Systrace: STM_CR[0x0000] = 0x00000600 (prev. 0x00000000)
[ 3.221941] stm-systrace 9180000.systrace: Systrace: STM_MCR[0x0008] = 0x00000000 (prev. 0x00000000)
[ 3.221949] stm-systrace 9180000.systrace: Systrace: STM_TER[0x0010] = 0x000003ff (prev. 0x000003ff)
[ 3.221958] stm-systrace 9180000.systrace: Systrace: STM_FTR[0x0080] = 0x00000001 (prev. 0x00000000)
[ 3.221966] stm-systrace 9180000.systrace: Systrace: STM_CTR[0x0088] = 0x00000001 (prev. 0x00000000)
[ 3.221972] Systrace: STM IP revision is V3
[ 3.221976] Systrace: STM_PID=0x00680dec(0x00680dec)
[ 3.221980] Systrace: STM_CID=0xb105f00d(0xb105f00d)
[ 3.221983] MTT: registering output driver stm
[ 3.221989] stm-systrace 9180000.systrace: Systrace: driver probed.
[ 3.234402] VFS: Disk quotas dquot_6.5.2
[ 3.234704] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.237787] NFS: Registering the id_resolver key type
[ 3.237812] Key type id_resolver registered
[ 3.237817] Key type id_legacy registered
[ 3.237844] msgmni has been set to 808
[ 3.238511] async_tx: api initialized (async)
[ 3.238518] Key type asymmetric registered
[ 3.238523] Asymmetric key parser 'x509' registered
[ 3.238929] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 3.238937] io scheduler noop registered
[ 3.238956] io scheduler cfq registered (default)
[ 3.360746] STMicroelectronics ASC driver initialized
[ 3.360886] st-pinctrl 961f080.pin-controller-sbc: maps: function sbc_serial0 group sbc_serial0-0 num 3
[ 3.360979] 9530000.serial: ttyS0 at MMIO 0x9530000 (irq = 170) is a st-asc
[ 5.018622] console [ttyS0] enabled
[ 5.022429] st-pinctrl 961f080.pin-controller-sbc: maps: function sbc_serial1 group sbc_serial1-0 num 3
[ 5.031889] 9531000.serial: ttyS1 at MMIO 0x9531000 (irq = 171) is a st-asc
[ 5.039804] st-hwrandom 8a89000.rng: ST Random Number Generator Device Probe Successful
[ 5.056468] brd: module loaded
[ 5.059526] Loading iSCSI transport class v2.0-870.
[ 5.067066] ahci ahci.0: can't get clock
[ 5.071002] miphy28lp-phy 9b22000.miphy28lp: miphy28lp_phy_init_sata
[ 5.077344] miphy28lp-phy 9b22000.miphy28lp: sata-up mode, addr 0x9d8e4000
[ 5.088285] ahci ahci.0: forcing PORTS_IMPL to 0x1
[ 5.093086] ahci ahci.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 5.101076] ahci ahci.0: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 5.110309] scsi0 : ahci_platform
[ 5.114054] ata1: SATA max UDMA/133 mmio [mem 0x09b20000-0x09b20fff] port 0x100 irq 191
[ 8.657964] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 8.664633] ata1.00: ATA-9: WDC WD20EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 8.671334] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.678116] ata1.00: SN: WD-WCC4M0PZ5NH9
[ 8.682886] ata1.00: configured for UDMA/133
[ 8.687776] scsi 0:0:0:0: Direct-Access WDC WD20EFRX-68EUZN0 82.0 PQ: 0 ANSI: 5
[ 8.697341] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 8.705088] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 8.710464] sd 0:0:0:0: [sda] Write Protect is off
[ 8.711199] ahci ahci.1: can't get clock
[ 8.711206] miphy28lp-phy 9b2a000.miphy28lp: miphy28lp_phy_init_sata
[ 8.711210] miphy28lp-phy 9b2a000.miphy28lp: sata-up mode, addr 0x9d8ea000
[ 8.713112] ahci ahci.1: forcing PORTS_IMPL to 0x1
[ 8.713139] ahci ahci.1: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 8.713145] ahci ahci.1: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 8.752795] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.752866] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.763416] scsi1 : ahci_platform
[ 8.767195] ata2: SATA max UDMA/133 mmio [mem 0x09b28000-0x09b28fff] port 0x100 irq 202
[ 8.775223] Delay 5 seconds to wait for disk 2 ready.
[ 8.778719] sda: sda1 sda2 sda3 < sda5 >
[ 8.784747] sd 0:0:0:0: [sda] Attached SCSI disk
[ 22.217965] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 22.224600] ata2.00: ATA-9: WDC WD20EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 22.231301] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 22.238083] ata2.00: SN: WD-WCC4M7LTLFTU
[ 22.242847] ata2.00: configured for UDMA/133
[ 22.247714] scsi 1:0:0:0: Direct-Access WDC WD20EFRX-68EUZN0 82.0 PQ: 0 ANSI: 5
[ 22.257283] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 22.265030] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 22.270378] sd 1:0:0:0: [sdb] Write Protect is off
[ 22.272731] st-pinctrl 923f080.pin-controller-flash: maps: function fsm group fsm num 7
[ 22.272989] stm-spi-fsm 9022000.spifsm: No provision for SPI reset on boot-from-spi system
[ 22.272994] stm-spi-fsm 9022000.spifsm: Individual block locking scheme enabled
[ 22.272999] stm-spi-fsm 9022000.spifsm: found device: n25q064, size = 800000 (8MiB) erasesize = 0x00010000 (64KiB)
[ 22.273013] Searching for RedBoot partition table in n25q064 at offset 0x7f0000
[ 22.278632] 6 RedBoot partitions found on MTD device n25q064
[ 22.278634] Creating 6 MTD partitions on "n25q064":
[ 22.278639] 0x000000000000-0x0000000c0000 : "RedBoot"
[ 22.284723] 0x0000000c0000-0x000000390000 : "zImage"
[ 22.286362] 0x000000390000-0x0000007d0000 : "rd.gz"
[ 22.288018] 0x0000007d0000-0x0000007e0000 : "vendor"
[ 22.288041] vender Mac0 address : 00:11:32:74:ea:c5
[ 22.288045] vender Mac1 doesn't set ucSum:0x00 Buf:0x00 Sum:0.
[ 22.288047] vender Mac2 doesn't set ucSum:0x00 Buf:0x00 Sum:0.
[ 22.288050] vender Mac3 doesn't set ucSum:0x00 Buf:0x00 Sum:0.
[ 22.289703] serial number='1730NEN106700'
[ 22.289704] 0x0000007e0000-0x0000007f0000 : "RedBoot Config"
[ 22.291332] 0x0000007f0000-0x000000800000 : "FIS directory"
[ 22.297214] st-pinctrl 961f080.pin-controller-sbc: maps: function gmac1 group rgmii1-0 num 13
[ 22.297223] st-pinctrl 961f080.pin-controller-sbc: maps: function gmac1 group rgmii1-mdio num 3
[ 22.297415] stmmaceth 9630000.dwmac: phy-addr property limits bus scan to this addr
[ 22.297524] stmmac - user ID: 0xca, Synopsys ID: 0x37
[ 22.297526] Ring mode enabled
[ 22.297529] DMA HW capability register supported
[ 22.297530] Enhanced/Alternate descriptors
[ 22.297531] Enabled extended descriptors
[ 22.297533] RX Checksum Offload Engine supported (type 2)
[ 22.297535] TX Checksum insertion supported
[ 22.297536] Wake-Up On Lan supported
[ 22.297554] Enable RX Mitigation via HW Watchdog Timer
[ 22.299714] libphy: stmmac: probed
[ 22.299719] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01) active
[ 22.301159] i2c /dev entries driver
[ 22.301590] st-pinctrl 922f080.pin-controller-rear: maps: function i2c4 group i2c4-default num 3
[ 22.328643] st-i2c 9844000.i2c: ST I2C(0x0) initialized
[ 22.328685] st-pinctrl 922f080.pin-controller-rear: maps: function i2c5 group i2c5-default num 3
[ 22.328731] st-i2c 9845000.i2c: No ID specified in DT alias
[ 22.331903] st_thermal 91a0000.temp0: STMicroelectronics thermal sensor initialised
[ 22.333163] st-lpc-wdt 8787000.lpc_wdt: LPC Watchdog driver registered, reset type is cold
[ 22.333597] md: linear personality registered for level -1
[ 22.333600] md: raid0 personality registered for level 0
[ 22.333602] md: raid1 personality registered for level 1
[ 22.333604] md: raid10 personality registered for level 10
[ 22.334007] md: raid6 personality registered for level 6
[ 22.334010] md: raid5 personality registered for level 5
[ 22.334012] md: raid4 personality registered for level 4
[ 22.334839] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 22.335550] sdhci: Secure Digital Host Controller Interface driver
[ 22.335551] sdhci: Copyright(c) Pierre Ossman
[ 22.335552] sdhci-pltfm: SDHCI platform and OF driver helper
[ 22.541764] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 22.541894] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.552588] Mali: Mali device driver loaded
[ 22.553531] ST_DDR CNTRL driver registered
[ 22.557930] st-lpm driver registered
[ 22.561901] TCP: cubic registered
[ 22.565207] NET: Registered protocol family 17
[ 22.569707] Key type dns_resolver registered
[ 22.574089] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 22.581790] Registering SWP/SWPB emulation handler
[ 22.586908] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 22.597000] Loading module verification blacklist certificates
[ 22.602898] Loading module verification certificates
[ 22.607916] MODSIGN: Loaded cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[ 22.622967] MODSIGN: Loaded cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[ 22.627967] sdb: sdb1 sdb2 sdb3 < sdb5 >
[ 22.637408] MODSIGN: Loaded cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[ 22.649298] MODSIGN: Loaded cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[ 22.688298] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 22.713836] MTT: registering output driver dfs
[ 22.718314] MTT: multicore-trace initialized.
[ 22.722706] vmmc0: disabling
[ 22.725585] regulator-dummy: disabling
[ 22.763864] Freeing unused kernel memory: 232K (80666000 - 806a0000)
[ 22.874791] stih407-usb-genphy f8.usbpicophy: STiH407 USB Generic picoPHY driver probed!
[ 22.883326] stih407-usb-genphy fc.usbpicophy: STiH407 USB Generic picoPHY driver probed!
[ 22.891867] stih407-usb-genphy 100.usbpicophy: STiH407 USB Generic picoPHY driver probed!
[ 22.923340] sti-usb3-phy 8f90000.usb3_phy: USB3 MiPHY Ref clk 30 MHz enabled
[ 22.930486] sti-usb3-phy 8f90000.usb3_phy: usb3 ioaddr 0x9d974000, pipew ioaddr 0x9d976000
[ 22.939063] sti-usb3-phy 8f90000.usb3_phy: USB3 MiPHY2 probed
[ 23.002514] usbcore: registered new interface driver usbfs
[ 23.010073] usbcore: registered new interface driver hub
[ 23.018321] usbcore: registered new device driver usb
[ 23.076151] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 23.097030] ehci-pci: EHCI PCI platform driver
[ 23.123070] ehci-platform: EHCI generic platform driver
[ 23.151531] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 23.223460] st-pinctrl 922f080.pin-controller-rear: maps: function usb0 group usb2-0 num 3
[ 23.231808] st-hcd 9a03c00.usb: 48MHz ohci clk not found
[ 23.237241] stih407-usb-genphy f8.usbpicophy: Generic picoPHY usb port init.
[ 23.244328] stih407-usb-genphy f8.usbpicophy: found picoPHY in rst state
[ 23.251390] ehci-platform ehci-platform.0: EHCI Host Controller
[ 23.257320] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
[ 23.266010] ehci-platform ehci-platform.0: irq 183, io mem 0x09a03e00
[ 23.287964] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[ 23.296937] hub 1-0:1.0: USB hub found
[ 23.300721] hub 1-0:1.0: 1 port detected
[ 23.306067] ohci-platform ohci-platform.0: Generic Platform OHCI Controller
[ 23.313080] ohci-platform ohci-platform.0: new USB bus registered, assigned bus number 2
[ 23.321229] ohci-platform ohci-platform.0: irq 212, io mem 0x09a03c00
[ 23.382793] hub 2-0:1.0: USB hub found
[ 23.386555] hub 2-0:1.0: 1 port detected
[ 23.421155] st-pinctrl 922f080.pin-controller-rear: maps: function usb3 group usb3-2 num 3
[ 23.429581] usb-st-dwc3 8f94000.dwc3: glue-logic addr 0x9da4c000, syscfg-reg offset 0x110
[ 23.438612] dwc3 9900000.dwc3: unable to find phy
[ 23.445418] sti-usb3-phy 8f90000.usb3_phy: MiPHY28LP setup
[ 23.451012] sti-usb3-phy 8f90000.usb3_phy: MiPHY28LP release 0x231 found
[ 23.457911] sti-usb3-phy 8f90000.usb3_phy: USB3 MIPHY28LP timer initialized
[ 23.464907] stih407-usb-genphy 100.usbpicophy: Generic picoPHY usb port init.
[ 23.671893] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 23.677378] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3
[ 23.685899] xhci-hcd xhci-hcd.0.auto: irq 187, io mem 0x09900000
[ 23.692404] xHCI xhci_add_endpoint called for root hub
[ 23.692415] xHCI xhci_check_bandwidth called for root hub
[ 23.694110] hub 3-0:1.0: USB hub found
[ 23.697873] hub 3-0:1.0: 1 port detected
[ 23.702009] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 23.707498] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
[ 23.715842] xHCI xhci_add_endpoint called for root hub
[ 23.715852] xHCI xhci_check_bandwidth called for root hub
[ 23.717932] hub 4-0:1.0: USB hub found
[ 23.721751] hub 4-0:1.0: 1 port detected
[ 23.725841] usb-st-dwc3 8f94000.dwc3: configured as host DRD
[ 23.731620] usb-st-dwc3 8f94000.dwc3: probe exits fine...
[ 23.798394] ds216play_synobios: module license 'Synology Inc.' taints kernel.
[ 23.806597] Disabling lock debugging due to kernel taint
[ 23.813289] correction with 0x00
[ 23.814383] 2020-1-18 15:31:0 UTC
[ 23.814393] synobios: load, major number 201
[ 23.818716] Brand: Synology
[ 23.818723] Model: DS-216play
[ 23.818730] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[ 23.818746] synobios cpu_arch proc entry initialized
[ 23.823702] synobios crypto_hw proc entry initialized
[ 23.828766] synobios syno_platform proc entry initialized
[ 23.834391] synobios open /dev/ttyS1 success
[ 23.852651] synobios: unload
[ 23.871594] md: Autodetecting RAID arrays.
[ 23.921085] md: invalid raid superblock magic on sda5
[ 23.926129] md: sda5 does not have a valid v0.90 superblock, not importing!
[ 23.970550] md: invalid raid superblock magic on sdb5
[ 23.975590] md: sdb5 does not have a valid v0.90 superblock, not importing!
[ 23.982560] md: Scanned 6 and added 4 devices.
[ 23.986988] md: autorun ...
[ 23.989778] md: considering sda1 ...
[ 23.993349] md: adding sda1 ...
[ 23.996570] md: sda2 has different UUID to sda1
[ 24.001107] md: adding sdb1 ...
[ 24.004325] md: sdb2 has different UUID to sda1
[ 24.008870] md: created md0
[ 24.011649] md: bind
[ 24.014372] md: bind
[ 24.017083] md: running:
[ 24.021096] md/raid1:md0: active with 2 out of 2 mirrors
[ 24.071135] md0: detected capacity change from 0 to 2549940224
[ 24.077176] md: considering sda2 ...
[ 24.080787] md: adding sda2 ...
[ 24.084024] md: adding sdb2 ...
[ 24.089967] md: created md1
[ 24.092761] md: bind
[ 24.095493] md: bind
[ 24.098247] md: running:
[ 24.104109] md/raid1:md1: active with 2 out of 2 mirrors
[ 24.132308] md1: detected capacity change from 0 to 2147418112
[ 24.138385] md: ... autorun DONE.
[ 24.175960] md0: unknown partition table
[ 24.357985] usb 2-1: new full-speed USB device number 2 using ohci-platform
[ 25.777976] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 25.894016] EXT4-fs (md0): barriers disabled
[ 25.911464] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[ 25.948034] usb 3-1: not running at top speed
[ 26.397983] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 26.404519] xhci-hcd xhci-hcd.0.auto: Setup ERROR: address device command for slot 1.
[ 27.567962] usb 3-1: new high-speed USB device number 3 using xhci-hcd
[ 27.738005] usb 3-1: not running at top speed
[ 28.187990] usb 3-1: new high-speed USB device number 3 using xhci-hcd
[ 28.194528] xhci-hcd xhci-hcd.0.auto: Setup ERROR: address device command for slot 1.
[ 29.357963] usb 3-1: new high-speed USB device number 4 using xhci-hcd
[ 29.378054] usb 3-1: not running at top speed
[ 29.827975] usb 3-1: new high-speed USB device number 4 using xhci-hcd
[ 29.848044] usb 3-1: not running at top speed
[ 30.297977] usb 3-1: new high-speed USB device number 4 using xhci-hcd
[ 30.318044] usb 3-1: not running at top speed
[ 30.767975] usb 3-1: new high-speed USB device number 4 using xhci-hcd
[ 30.788040] usb 3-1: not running at top speed
[ 31.237976] usb 3-1: new high-speed USB device number 4 using xhci-hcd
[ 31.258041] usb 3-1: not running at top speed
[ 31.707975] usb 3-1: new high-speed USB device number 4 using xhci-hcd
[ 31.728043] usb 3-1: not running at top speed
[ 31.898245] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[ 33.018738] EXT4-fs (md0): re-mounted. Opts: (null)
[ 38.481537] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 38.486988] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 38.955872] md1: unknown partition table
[ 39.113074] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k
[ 42.277100] NET: Registered protocol family 10
[ 42.331217] sit: IPv6 over IPv4 tunneling driver
[ 42.862884] init: syno-auth-check main process (2829) killed by TERM signal
[ 44.198158] fuse init (API version 7.22)
[ 44.322488] Loading modules backported from Linux version v3.18.1-0-g39ca484
[ 44.329581] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c
[ 44.369163] systemd-udevd[3197]: starting version 204
[ 44.778216] exFAT: Version 1.2.9
[ 45.782515] correction with 0x00
[ 45.786638] 2020-1-18 15:31:22 UTC
[ 45.786653] synobios: load, major number 201
[ 45.791018] Brand: Synology
[ 45.791031] Model: DS-216play
[ 45.791042] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[ 45.791072] synobios cpu_arch proc entry initialized
[ 45.796031] synobios crypto_hw proc entry initialized
[ 45.801201] synobios syno_platform proc entry initialized
[ 45.806895] synobios open /dev/ttyS1 success
[ 49.260368] dwmac1000: Master AXI performs any burst length
[ 49.266296] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 49.399534] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 49.477352] nf_conntrack version 0.5.0 (6470 buckets, 25880 max)
[ 49.814913] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 53.336120] md: md2 stopped.
[ 53.341199] md: bind
[ 53.349069] md: bind
[ 53.385547] md/raid1:md2: active with 2 out of 2 mirrors
[ 53.410574] md2: detected capacity change from 0 to 1995451858944
[ 53.428986] md2: unknown partition table
[ 53.802554] bio: create slab at 1
[ 55.259173] libphy: stmmac-0:01 - Link is Up - 1000/Full
[ 55.266261] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 55.424446] EXT4-fs (dm-0): barriers disabled
[ 55.539405] EXT4-fs (dm-0): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
[ 64.046672] usbcore: registered new interface driver usb-storage
[ 64.166270] usbcore: registered new interface driver usblp
[ 64.492951] usbcore: registered new interface driver usbhid
[ 64.498562] usbhid: USB HID core driver
[ 67.453235] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(00113274eac5).
[ 67.701832] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized
[ 68.163436] iSCSI:target_core_device.c:617:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
[ 68.188492] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
[ 68.475261] iSCSI:target_core_file.c:146:fd_attach_hba RODSP plugin for fileio is enabled.
[ 68.483577] iSCSI:target_core_file.c:153:fd_attach_hba ODX Token Manager is enabled.
[ 68.508082] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled.
[ 68.517097] iSCSI:target_core_ep.c:813:ep_attach_hba RODSP plugin for epio is enabled.
[ 68.525061] iSCSI:target_core_ep.c:820:ep_attach_hba ODX Token Manager is enabled.
[ 70.135951] ICS Version 1.0.2 : Final (05:06:18 May 10 2019)
[ 70.135966] ICS init 1 debug_flags 0x4ffffffff debug_chan 0x1 connect 0 watchdog 0 bpa2_part 'multicom'
[ 70.135970] stih41x_configure_clocks_ics() : start
[ 70.135977] clock lock 966815d4
[ 70.135995] clk : clk_00 9b824580 taken
[ 70.136005] clk : clk_01 9b824600 taken
[ 70.136015] clk : clk_02 9b824500 taken
[ 70.136023] clk : clk_03 9b824500 taken
[ 70.136039] prepare all clocks
[ 70.136048] stih41x_configure_clocks_ics() : exit
[ 70.136066] ICS loading firmware 'vid_firmware-mpeg4p2-stih407.elf' cpu 2 (video)
[ 70.200642] ICS starting cpu 2 (video) entry 0x41c00400
[ 70.200652] enable clock 1
[ 70.200667] ICS loading firmware 'audio_firmware-profile0-stih407.elf' cpu 3 (audio)
[ 70.265737] ICS starting cpu 3 (audio) entry 0x40c00c00
[ 70.265748] enable clock 2
[ 70.265761] ICS loading firmware 'audio_firmware-profile0-stih407.audio1.elf' cpu 1 (gp1)
[ 70.296634] ICS starting cpu 1 (gp1) entry 0x41400c00
[ 70.296645] enable clock 0
[ 70.296657] ICS loading firmware 'security_firmware-stih410.elf' cpu 4 (gp0)
[ 70.316943] ICS starting cpu 4 (gp0) entry 0x40400300
[ 70.316955] enable clock 3
[ 70.316967] ICS: Using BPA2 partition 'multicom'
[ 70.316973] Test: ICS_GetTuneable(ICS_TUNEABLE_ADMIN_THREAD_PRIORITY) = -90 Calling ICS_cpu_init(0, 0x1f, 0x0)
[ 70.316986] insmod:ics_cpu_init:346 cpuNum 0 cpuMask 0x1f flags 0x0
[ 70.317090] insmod:ics_cpu_init:384 cpu 0 ('host') cpuMask 0x1f ics_state 97bba000
[ 70.319791] insmod:ics_cpu_init:550 Memory usage : allocated 0 OS used 0 (+0) avail 0
[ 70.319801] ICS Adding region[0] 0x60000000 0x800000 cacheflag=0x1
[ 70.326520] ICS debug: 96681000 in module_dir
[ 70.576324] MME Version 4.4.1 Final (05:06:30 May 10 2019)
[ 70.576335] MME module init=1 debug_flags=0x1 pool_size=262144
[ 70.581080] insmod:mme_init:373 Succeeded on cpu 0 mme_state 99d24e00
[ 70.581089] insmod:mme_init:377 Memory usage : OS used 0 (+0) avail 0
[ 70.666614] Load module infra_main [?] by insmod (pid 8069)
[ 70.930692] Load module stm_event_main [?] by insmod (pid 8081)
[ 71.155604] stm-ce cesc.54: Enabling clock stfe_ccsc
[ 71.160604] stm-ce cesc.54: Clock stfe_ccsc @ 225000068Hz
[ 71.165997] stm-ce cesc.54: Enabling clock CLK_TP
[ 71.170741] stm-ce cesc.54: Clock CLK_TP @ 400000000Hz
[ 71.176254] stm-ce cesc.54: Disabling clock stfe_ccsc
[ 71.181370] stm-ce cesc.54: Disabling clock CLK_TP
[ 71.199230] st_relay_core_open done ok 786432x10
[ 71.254722] st_relayfs_open done ok
[ 71.293875] Init of MME log wrapper
[ 71.297360] acc_mme_loginit done ok
[ 71.468836] bdispII_device_features.c:409: BDisp/BLT: blitter is a 'STiH407' (15)
[ 71.588180] bdispII.c:183: AQ(bdisp-aq2) not found
[ 71.592971] bdispII.c:183: AQ(bdisp-aq3) not found
[ 71.597756] bdispII.c:183: AQ(bdisp-aq4) not found
[ 71.602762] bdispII_device_features.c:409: BDisp/BLT: blitter is a 'STiH407' (15)
[ 71.641126] bdispII.c:183: AQ(bdisp-aq2) not found
[ 71.646173] bdispII.c:183: AQ(bdisp-aq3) not found
[ 71.651011] bdispII.c:183: AQ(bdisp-aq4) not found
[ 71.717903] Loading os wrapper module...
[ 71.792485] Loading stmfe utility module ...
[ 71.970159] Loading module stm_fe ...
[ 71.974066] st-pinctrl 920f080.pin-controller-front0: maps: function tsin0 group tsin0_serial num 6
[ 71.983217] stm_demod_get_pdata: No syscfg phandle specified
[ 71.988930] demod_config_pdata: demod config not set properly
[ 71.994742] st-pinctrl 920f080.pin-controller-front0: maps: function tsin4 group tsin4_serial_alt3 num 6
[ 72.004373] stm_demod_get_pdata: ts mapping control syscfg update ok
[ 72.010787] demod_config_pdata: demod config not set properly
[ 72.016604] st-pinctrl 920f080.pin-controller-front0: maps: function tsin3 group tsin3_serial num 6
[ 72.025768] stm_demod_get_pdata: No syscfg phandle specified
[ 72.031503] demod_config_pdata: demod config not set properly
[ 72.037622] stm_lnb_get_pdata: lnb config not properly set
[ 72.043231] stm_lnb_get_pdata: lnb config not properly set
[ 72.049116] stm_fe_diseqc_probe: Config diseqc stm_fe_diseqc.0
[ 72.055020] stm_fe_diseqc_probe: Config diseqc stm_fe_diseqc.1
[ 72.061342] stm_fe_ip_probe: Configuring ip stm_fe_ip.0
[ 72.066630] stm_fe_ip_probe: Configuring ip stm_fe_ip.1
[ 72.071951] stm_fe_ip_probe: Configuring ip stm_fe_ip.2
[ 72.077233] stm_fe_ip_probe: Configuring ip stm_fe_ip.3
[ 72.082578] stm_fe_ip_probe: Configuring ip stm_fe_ip.4
[ 72.087858] stm_fe_ip_probe: Configuring ip stm_fe_ip.5
[ 72.571346] st-fdma 8e20000.fdma-mpe: Requesting firmware: fdma_STiH407_0.elf
[ 72.601699] st-fdma 8e20000.fdma-mpe: SLIM hw 0.134413, FDMA fw 1.0
[ 72.619749] platform denc.fw: requesting frm: 'denc.fw', 7f303910/99177c0c
[ 72.626637] platform denc.fw: using denc_H407_b2120.fw for denc.fw firmware
[ 72.651741] platform denc.fw: loading firmware data.
[ 72.656707] platform denc.fw: firmware data is loaded (size=40).
[ 72.662849] platform denc.fw: frm 'denc.fw' successfully loaded
[ 72.669050] platform hdf.fw: requesting frm: 'hdf.fw', 7f303910/99f3044c
[ 72.675766] platform hdf.fw: using hdf_H407_b2120.fw for hdf.fw firmware
[ 72.718054] platform hdf.fw: loading firmware data.
[ 72.722939] platform hdf.fw: firmware data is loaded (size=264).
[ 72.729027] platform hdf.fw: frm 'hdf.fw' successfully loaded
[ 72.745570] stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_HDMI
[ 72.752707] stm-ios: vibe_os_clk_disable: Clock already disable CLK_REF_HDMIPHY
[ 72.760103] stm-ios: vibe_os_clk_disable: Clock already disable CLK_TMDS_HDMI
[ 72.767324] stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_MAIN_DISP
[ 72.774941] stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_MAIN_DISP
[ 72.782534] stm-ios: vibe_os_clk_disable: Clock already disable CLK_TMDS_HDMI
[ 72.789772] stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_HDMI
[ 72.796912] stm-ios: vibe_os_clk_disable: Clock already disable CLK_REF_HDMIPHY
[ 72.981944] stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_HDMI
[ 72.989080] stm-ios: vibe_os_clk_disable: Clock already disable CLK_REF_HDMIPHY
[ 72.996474] stm-ios: vibe_os_clk_disable: Clock already disable CLK_TMDS_HDMI
[ 73.003696] stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_MAIN_DISP
[ 74.147926] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = -95
[ 74.148161] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = -95
[ 74.148351] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = -95
[ 74.148539] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = -95
[ 74.148723] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = -95
[ 74.148915] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = 0
[ 74.149116] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = -95
[ 74.149224] stmvout_probe_media_planes: Display 0 found 7 planes (skipped 0)
[ 74.156415] stmvout_probe_media_outputs: Display 0: 4 output Plug added
[ 74.258059] stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_HDMI
[ 74.265203] stm-ios: vibe_os_clk_disable: Clock already disable CLK_REF_HDMIPHY
[ 74.272590] stm-ios: vibe_os_clk_disable: Clock already disable CLK_TMDS_HDMI
[ 74.279808] stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_MAIN_DISP
[ 76.571473] SE-Aud-CtoP pol:2 prio:58
[ 76.575127] SE-Aud-PtoD pol:2 prio:58
[ 76.578812] SE-Aud-DtoM pol:2 prio:60
[ 76.582470] SE-Aud-MPost pol:2 prio:62
[ 76.586212] SE-Vid-CtoP pol:2 prio:58
[ 76.589898] SE-Vid-PtoD pol:2 prio:58
[ 76.593555] SE-Vid-DtoM pol:2 prio:60
[ 76.597215] SE-Vid-MPost pol:2 prio:62
[ 76.600994] SE-Vid-H264Int pol:2 prio:59
[ 76.604905] SE-Vid-HevcInt pol:2 prio:59
[ 76.608846] SE-Aud-Reader pol:2 prio:64
[ 76.612680] SE-Aud-StreamT pol:2 prio:59
[ 76.616598] SE-Aud-Mixer pol:2 prio:64
[ 76.620372] SE-Aud-BcstMix pol:2 prio:64
[ 76.624290] SE-Aud-Bypass pol:2 prio:64
[ 76.628141] SE-Man-Coord pol:2 prio:59
[ 76.631885] SE-Man-BrSrcGrab pol:2 prio:50
[ 76.635974] SE-Man-BrCapture pol:2 prio:50
[ 76.640087] SE-Man-DsVideo pol:2 prio:74
[ 76.643998] SE-Playbck-Drain pol:2 prio:64
[ 76.648103] SE-EncAud-ItoP pol:2 prio:61
[ 76.652017] SE-EncAud-PtoC pol:2 prio:58
[ 76.655926] SE-EncAud-CtoO pol:2 prio:59
[ 76.659875] SE-EncVid-ItoP pol:2 prio:61
[ 76.664219] SE-EncVid-PtoC pol:2 prio:58
[ 76.668360] SE-EncVid-CtoO pol:2 prio:59
[ 76.672281] SE-Encod-Coord pol:2 prio:61
[ 76.676198] SE-Other pol:2 prio:50
[ 76.681365] player2 probe done ok
[ 76.684955] [sched_delayed] sched: RT throttling activated
[ 76.952210] stm_te_tsmux_mme.te_tsmux_mme_init_module() - Load module te_tsmux_mme by insmod (pid 8521)
[ 77.125334] ata1.00: configured for UDMA/133
[ 77.129682] ata1: EH complete
[ 77.592462] ata2.00: configured for UDMA/133
[ 77.596742] ata2: EH complete
[ 80.670883] stm_te_hal.stpti_tp_probe() - Probed 8880000.tetp device
[ 80.677377] stm_te_hal.stpti_tp_probe() - Caching firmware pti_tp3.elf
[ 80.695507] stm_te_hal.stptiHAL_pDeviceInit() - Clocks Per Second = 100.
[ 80.702265] stm-tango-tp 8880000.tetp: Resource tp [0x8880000:0x88aefff]
[ 80.709271] stm_te_hal.stptiHAL_pDeviceInit() - TANGO TP mapped... [ 08880000 => 9de40000 ]
[ 80.717625] stm-tango-tp 8880000.tetp: Enabling clock CLK_TP
[ 80.723318] stm-tango-tp 8880000.tetp: Clock CLK_TP @ 400000000Hz
[ 80.729475] stm-tango-tp 8880000.tetp: IRQ 57
[ 80.733877] stm_te_hal.stptiHAL_pDeviceInit() - TP ISR installed on number 0x00000039.
[ 80.741815] stm-tango-tp 8880000.tetp: Loading firmware: pti_tp3.elf
[ 80.748216] stm-tango-tp 8880000.tetp: Loading segment 0 0x00000000 (0x1a8 bytes) -> 0x9de40000 (0x11b0 bytes)
[ 80.758518] stm-tango-tp 8880000.tetp: Loading segment 1 0x000011b0 (0xe4f8 bytes) -> 0x9de411b0 (0xe528 bytes)
[ 80.777930] stm-tango-tp 8880000.tetp: Loading segment 2 0x00400000 (0x9f38 bytes) -> 0x9de50000 (0x9f38 bytes)
[ 80.794440] stm_te_hal.stptiHAL_pDeviceInit() - TP Firmware loaded successfully
[ 80.801767] stm_te_hal.stptiHAL_pDeviceInit() - Started TP from reset (waiting for Ready)
[ 80.810029] stm_te_hal.stptiHAL_TPInterruptHandler() - STxP70_TP0 : Starting 01022501_TP_VERSION [CS00029AA8] Built 10:08:55 Sep 4 2014
[ 80.822332] stm_te_hal.stptiHAL_pDeviceSetInitialisationParameters() - Assuming STTKD driver in system.
[ 80.831942] stm_te_hal.stptiHAL_TPInterruptHandler() - STxP70_TP0 : Total Usage 39688 of 44032 bytes.
[ 80.841269] stm_te_hal.stptiHAL_TPInterruptHandler() - STxP70_TP0 : Configuring Timer Counter for packet timestamps. Divider 0xB
[ 80.868272] stm_te_hal.stptiHAL_pDeviceInit() - TP (device0) Started Successfully. [ 80.875893] stm_te_hal.stptiHAL_pDeviceInit() - Across 8 vDevices, there are 256 slots, 96 buffers, 32 indexers, 256 hw section filters. [ 80.920267] stm_te_hal.stptiHAL_pDeviceSleep() - TP sleeping (device0) [ 80.926904] stm-tango-tp 8880000.tetp: Disabling clock CLK_TP [ 80.954504] stm_te_hal.stpti_stfe_probe() - Probed 8a20000.tefe device [ 80.961302] stm_te_hal.stpti_stfe_probe() - Caching firmware pti_memdma_h407.elf [ 80.969070] stm_te_hal.stptiHAL_EventTask() - Entering Event Task for 1ff07fff [ 80.976425] stm_te_hal.tango_idle() - pDevice idle [ 80.981347] stm_te_hal.tango_suspend() - pDevice 0 suspended [ 80.987130] stm-tango-tp 8880000.tetp: Enabling clock CLK_TP [ 80.992884] stm-tango-tp 8880000.tetp: Clock CLK_TP @ 400000000Hz [ 80.999128] stm_te_hal.stptiHAL_pDeviceWakeup() - TP woken up (device0) [ 81.005745] stm_te_hal.stptiHAL_pDevicePowerdown() - TP held in reset (device0) [ 81.013106] stm_te_hal.stptiHAL_pDevicePowerdown() - Saving TP shared memory (device0) [ 81.024861] stm_te_hal.stptiHAL_pDevicePowerdown() - TP powered down (device0) [ 81.032104] stm-tango-tp 8880000.tetp: Disabling clock CLK_TP [ 81.037873] stm_te_hal.tango_suspend() - pDevice 0 frozen [ 81.082410] stm_te_hal.stptiTSHAL_Init() - Initialising STFE device 8a20000.tefe
[ 81.091370] stm-tango-stfe 8a20000.tefe: Resource stfe [0x8a20000:0x8a2ffff] [ 81.098530] stm-tango-stfe 8a20000.tefe: Resource stfe-ram [0x8a00000:0x8a03fff] [ 81.105948] stm-tango-stfe 8a20000.tefe: Idle IRQ 67 [ 81.110942] stm-tango-stfe 8a20000.tefe: error IRQ 66 [ 81.115992] stm-tango-stfe 8a20000.tefe: Enabling clock stfe_ccsc [ 81.122109] stm-tango-stfe 8a20000.tefe: Clock stfe_ccsc @ 225000068Hz [ 81.128745] stm-tango-stfe 8a20000.tefe: Enabling clock stfe_frc-0 [ 81.135001] stm-tango-stfe 8a20000.tefe: Setting clock stfe_frc-0 to 27000000Hz [ 81.142376] stm-tango-stfe 8a20000.tefe: Clock stfe_frc-0 @ 27000001Hz [ 81.148976] stm-tango-stfe 8a20000.tefe: Loading firmware: pti_memdma_h407.elf [ 81.156962] stm-tango-stfe 8a20000.tefe: Loading IMEM segment 0 0x00000000 (0x39f bytes) -> 0x9da48000 (0x4d4 bytes) [ 81.167866] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 1 0x00000020 (0x5c bytes) -> 0x9da3a080 (0x5c bytes) [ 81.178328] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 2 0x00000037 (0x0 bytes) -> 0x9da3a0dc (0xc0 bytes) [ 81.188619] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 3 0x00000010 (0x14 bytes) -> 0x9da3a040 (0x14 bytes) [ 81.199030] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 4 0x00000000 (0x18 bytes) -> 0x9da3a000 (0x18 bytes) [ 81.209508] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 5 0x000000a0 (0x2e0 bytes) -> 0x9da3a280 (0x2e0 bytes) [ 81.220113] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 6 0x00000080 (0x5c bytes) -> 0x9da3a200 (0x5c bytes) [ 81.230548] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 7 0x00000160 (0x200 bytes) -> 0x9da3a580 (0x200 bytes) [ 81.241169] stm_te_hal.stptiTSHAL_Stfev2_CreateConfig() - THIS IS THE RIGHT MEMDMA FW [ 81.249011] stm_te_hal.stptiTSHAL_Stfev2_CreateConfig() - THERE ARE 23 MEMDMA CH and 1 TP [ 81.257489] stm_te_hal.stptiTSHAL_Stfev2_MemdmaInit() - MEMDMA ISR installed on number 0x00000043. [ 81.266566] stm_te_hal.stptiTSHAL_Stfev2_SystemInit() - ERROR TSIN ISR error installed on number 0x00000042. [ 81.278975] stm_te_hal.stfe_idle() - stfe idle [ 81.283614] stm_te_hal.stptiTSHAL_Stfev2_SystemTerm() - ERROR TSIN ISR error uninstalled on number 0x00000042. [ 81.293648] stm_te_hal.stptiTSHAL_Stfev2_MemdmaTerm() - MEMDMA ISR uninstalled on number 0x00000043. [ 81.302838] stm-tango-stfe 8a20000.tefe: Disabling clock stfe_ccsc [ 81.309408] stm-tango-stfe 8a20000.tefe: Disabling clock stfe_tsout-0 [ 81.315845] stm-tango-stfe 8a20000.tefe: Disabling clock stfe_tsout-1 [ 81.322437] stm-tango-stfe 8a20000.tefe: Disabling clock stfe_frc-0 [ 81.328810] stm-tango-stfe 8a20000.tefe: Disabling clock stfe_frc-1 [ 81.335506] stm-tango-stfe 8a20000.tefe: Disabling clock stfe_mchi [ 81.341725] stm_te_hal.stfe_suspend() - Suspend TSInput 0 [ 81.347189] stm_te_hal.stfe_suspend() - Powered-down TSInput -1 [ 82.472507] Loading sat tuner wrapper module ... [ 82.582568] Loading VGLNA module ... [ 82.704572] Loading t/c tuner wrapper module ... [ 82.835570] Loading FE IP driver module... [ 82.935944] Loading stv4100 tuner module... [ 83.096299] Loading stv0367 driver module... [ 83.198959] Loading stv6120 tuner module ... [ 83.323995] Loading stv0910 driver module... [ 83.829626] Loading module ctrl_via_stm_fe = -1 [ 83.834153] stm_fe_discover: Discovered stm_fe_diseqc.0 ... [ 83.839741] stm_fe_discover: Discovered stm_fe_diseqc.1 ... [ 83.845307] stm_fe_discover: Discovered stm_fe_ip.0 ... [ 83.850526] stm_fe_discover: Discovered stm_fe_ip.1 ... [ 83.855737] stm_fe_discover: Discovered stm_fe_ip.2 ... [ 83.860955] stm_fe_discover: Discovered stm_fe_ip.3 ... [ 83.866165] stm_fe_discover: Discovered stm_fe_ip.4 ... [ 83.871382] stm_fe_discover: Discovered stm_fe_ip.5 ... [ 83.876592] 8 stm_fe objects discovered [ 83.880419] DVB: registering new adapter (ST DVB frontend driver) [ 83.886756] demod_config_pdata: demod config not set properly [ 83.892548] demod_config_pdata: demod config not set properly [ 83.898369] demod_config_pdata: demod config not set properly [ 83.904355] stm_dvb_get_lnb_pdata: lnb config not properly set [ 83.910296] stm_dvb_get_lnb_pdata: lnb config not properly set [ 83.916452] stm_dvb_diseqc_attach() Invalid demod object, cannot attach diseqc [ 83.923749] stm_dvb_diseqc_attach() Invalid demod object, cannot attach diseqc [ 83.931450] Configuring ip IPFE-STM_FE IP name stm-dvb-ip.37 [ 83.939611] Configuring ip IPFE-STM_FE IP name stm-dvb-ip.40 [ 83.946658] Configuring ip IPFE-STM_FE IP name stm-dvb-ip.43 [ 83.978396] Configuring ip IPFE-STM_FE IP name stm-dvb-ip.46 [ 83.986432] Configuring ip IPFE-STM_FE IP name stm-dvb-ip.49 [ 83.998316] Configuring ip IPFE-STM_FE IP name stm-dvb-ip.52 [ 84.008712] Created stm_fe_ip.0 for parent stm_fe_ip.0 [ 84.016229] Created stm_fe_ip.1 for parent stm_fe_ip.1 [ 84.029267] Created stm_fe_ip.2 for parent stm_fe_ip.2 [ 84.048067] Created stm_fe_ip.3 for parent stm_fe_ip.3 [ 84.055025] Created stm_fe_ip.4 for parent stm_fe_ip.4 [ 84.068077] Created stm_fe_ip.5 for parent stm_fe_ip.5 [ 84.074786] Found 8 demuxes, 256 pid filters, 96 output filters [ 84.083678] Added device stm_dvb_demux.0 [ 84.091181] Added device stm_dvb_demux.1 [ 84.096512] Added device stm_dvb_demux.2 [ 84.111054] Added device stm_dvb_demux.3 [ 84.122066] Added device stm_dvb_demux.4 [ 84.128397] Added device stm_dvb_demux.5 [ 84.156593] Added device stm_dvb_demux.6 [ 84.165264] Added device stm_dvb_demux.7 [ 84.271685] HevcppProbe SE-Vid-Hevcpp pol:2 prio:50 [ 84.276563] HevcppProbe hw core nb: 1 [ 84.280279] ret value : 0x0 max frequency value : 240000000 [ 84.285920] OSDEV_LinkDevice /dev/hevcpp - Major 247, Minor 0 [ 84.291687] Hevcpp probe done ok [ 84.888144] compo_capture_subdev_init(): created disabled links to video plane [ 84.895364] compo_capture_subdev_init(): created disabled links to gfx plane [ 84.902416] compo_capture_subdev_init(): created disabled links to output [ 84.990463] OSDEV_LinkDevice /dev/allocator - Major 245, Minor 0 [ 84.996463] AllocatorLoadModule done ok [ 85.077229] h264encoder 8c85000.h264encoder: Hva registers base address is 0x8c85000 and size is 0xfff [ 85.086646] h264encoder 8c85000.h264encoder: Hva esram base address is 0x6000000 and size is 0x3ffff [ 85.095862] h264encoder 8c85000.h264encoder: Hva interrupt number is 90 [ 85.102858] h264encoder 8c85000.h264encoder: Hva error interrupt number is 91 [ 85.110121] h264encoder 8c85000.h264encoder: Hva clock set to 300000000 [ 85.116950] h264encoder 8c85000.h264encoder: Hva version is 0x400 [ 85.124154] h264encoder 8c85000.h264encoder: (StreamId:0x0) Unable to soft-reset hva => reset platform [ 85.134456] h264encoder 8c85000.h264encoder: (StreamId:0x0) Incorrect stbus plug configuration, StBusPlugConfig = 0x0 [ 85.145067] h264encoder 8c85000.h264encoder: (StreamId:0x0) Force stbus plug configuration to recommended value, StBusPlugConfig = 0x408081 [ 85.158070] h264encoder 8c85000.h264encoder: (StreamId:0x0) Reset hva and configure registers done [ 85.167076] h264encoder 8c85000.h264encoder: Setting hva max instance number to 30 [ 85.174783] h264encoder 8c85000.h264encoder: H264 encode hardware host transformer probe done ok [ 85.311594] H264ppProbe SE-Vid-H264pp pol:2 prio:50 [ 85.316614] H264pp: hw core nb: 1 [ 85.320298] ret value : 0x0 max frequency value : 266250000 [ 85.326006] OSDEV_LinkDevice /dev/h264pp - Major 246, Minor 0 [ 85.331793] h264pp probe done ok [ 85.447775] HadesProbe: Probing device with DT [ 85.452287] For CLK_HWPE_HADES ret value : 0x0 max frequency value : 400000000 [ 85.459568] For CLK_FC_HADES ret value : 0x0 max frequency value : 332999958 [ 85.487393] HadesPmRuntime: Resume .. [ 85.491126] STHORM: library initialization(regs 0a010000(7274496), IRQ 107, partition hades-l3 [ 85.500022] RAB SLAVE: CONF_FC: source 0a100000 (00100000) dest 50000000 size 00080000 [ 85.508492] RAB SLAVE: CL_PERIPH: source 0a200000 (00200000) dest 20000000 size 00080000 [ 85.516735] RAB SLAVE: CONF_ENCMEM: source 0a280000 (00280000) dest 10000000 size 00040000 [ 85.525196] RAB SLAVE: CL_HWPE_OUT: source 0a2f0000 (002f0000) dest 30000000 size 00008000 [ 85.533625] RAB SLAVE: CL_HWPE_OUT: source 0a2f8000 (002f8000) dest 30000000 size 00008000 [ 85.541975] LoadHadesDevice: Hades API initialized with registers base 0a000000, IRQ base 107, BPA2 partition hades-l3 [ 85.563582] STHORM: firmware program segments loaded at 40a00000 (2097152 bytes) [ 85.571194] HADES_API: Configuring runtime struct @ 0a100000 [ 85.576847] HADES_API: Specified cluster mask: 0x80000001 for 1 clusters [ 85.583574] HADES_API: Booting fabric controller (id=4) @ 0xa119000 [ 85.589895] HADES_API: Waiting for boot message from FC .. [ 85.595422] HADES_API: ... FC has booted [ 85.599362] HADES_API: Sending first config message to FC, mailbox @ 0a118000 [ 85.606553] HADES_API: P2012 library initialization done [ 85.611902] LoadHadesDevice: HADES FW name: hades_fw.bin, size: 1247176 [ 85.618575] HADES_API: Configuring static binary [ 85.623190] HADES_API: HADES_InitTransformer: PedfRT_Descr_p(969f1f40) ->binary.size: 1247176 clusterId: 0x1f [ 85.633199] HADES_API: HADES_InitTransformer -> pedf_rt (p:0x62430000 v:0x9da22000 size:4) [ 85.642458] HadesPmRuntime: Suspend .. [ 85.646268] CRCDriver: major 246, minor 0 to 19 [ 85.650850] Hades HEVC host transformer probe done ok [ 85.776505] stm-c8jpg 8c84000.c8jpg: found c8jpg device at: 0x08c84000, irq: 88 [ 85.784456] stm-c8jpg 8c84000.c8jpg: decoder successfully probed [ 85.882206] Maximum vp8 clock frequency not retrieved from DT [ 85.888082] hx170_check_chip_id: Chip ID: 0x67315058 [ 85.893042] VP8 hardware host transformer probe done ok [ 86.078054] stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_HDMI [ 86.085189] stm-ios: vibe_os_clk_disable: Clock already disable CLK_REF_HDMIPHY [ 86.092579] stm-ios: vibe_os_clk_disable: Clock already disable CLK_TMDS_HDMI [ 86.099794] stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_MAIN_DISP [ 86.642766] warning:
nginx' uses 32-bit capabilities (legacy support in use) [ 86.648794] warning:nginx' uses 32-bit capabilities (legacy support in use) [ 87.665527] loop: module loaded [ 93.124098] findhostd uses obsolete (PF_INET,SOCK_PACKET) [ 96.430885] usbcore: registered new interface driver usbserial [ 96.539746] usbcore: registered new interface driver ftdi_sio [ 96.545561] usbserial: USB Serial support registered for FTDI USB Serial Device [ 96.553095] ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected [ 96.559855] usb 2-1: Detected FT232RL [ 96.563517] usb 2-1: Number of endpoints 2 [ 96.567639] usb 2-1: Endpoint 1 MaxPacketSize 64 [ 96.572308] usb 2-1: Endpoint 2 MaxPacketSize 64 [ 96.576925] usb 2-1: Setting MaxPacketSize 64 [ 96.590449] usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0 [ 96.640831] init: synoscheduler-vmtouch main process (2234) killed by TERM signal [ 96.656356] cp210x: module verification failed: signature and/or required key missing - tainting kernel [ 96.666631] usbcore: registered new interface driver cp210x [ 96.672555] usbserial: USB Serial support registered for cp210x [ 96.760896] usbcore: registered new interface driver pl2303 [ 96.766517] usbserial: USB Serial support registered for pl2303 [ 96.910133] usbcore: registered new interface driver ch341 [ 96.915779] usbserial: USB Serial support registered for ch341-uart [ 97.019524] usbcore: registered new interface driver ti_usb_3410_5052 [ 97.026043] usbserial: USB Serial support registered for TI USB 3410 1 port adapter [ 97.033831] usbserial: USB Serial support registered for TI USB 5052 2 port adapter [ 104.492836] init: synoscheduler-vmtouch main process (10764) killed by TERM signal [ 106.119327] init: synoscheduler-vmtouch main process (11349) killed by TERM signal [ 106.558676] tun: Universal TUN/TAP device driver, 1.6 [ 106.563731] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com [ 110.766902] init: pkg-WebStation-userdir main process (11452) terminated with status 1 [ 130.413902] usbcore: registered new interface driver snd-usb-audio [ 132.401678] usbcore: registered new interface driver snd-usb-hiface [ 229.787238] init: pkg-WebStation-userdir main process (17016) terminated with status 1 [ 233.381760] init: synocontentextractd main process ended, respawning [ 777.660904] open mtd (RedBoot Config), process=syno_mem_cfg [ 777.667101] close mtd (RedBoot Config), process=syno_mem_cfg [ 777.673434] open mtd (RedBoot Config), process=syno_mem_cfg [ 777.679397] close mtd (RedBoot Config), process=syno_mem_cfgOutput of
lsusbcommand|usb1 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (ehci_hcd ehci-platform.0) hub |__usb2 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (Linux 3.10.105 ohci_hcd Generic Platform OHCI Controller ohci-platform.0) hub |2-1 0403:6001:0600 00 2.00 12MBit/s 90mA 1IF (RFXCOM RFXtrx433 A1Y0NLCE) |usb3 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (Linux 3.10.105 xhci-hcd xHCI Host Controller xhci-hcd.0.auto) hub |3-1 0bda:8152:2000 00 2.10 480MBit/s 100mA 2IFs (Realtek USB 10/100 LAN 00E04C361AB0) |__usb4 1d6b:0003:0310 09 3.00 5000MBit/s 0mA 1IF (Linux 3.10.105 xhci-hcd xHCI Host Controller xhci-hcd.0.auto) hub
Output of
lsusbcommand|usb1 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (ehci_hcd ehci-platform.0) hub |__usb2 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (Linux 3.10.105 ohci_hcd Generic Platform OHCI Controller ohci-platform.0) hub |2-1 0403:6001:0600 00 2.00 12MBit/s 90mA 1IF (RFXCOM RFXtrx433 A1Y0NLCE) |usb3 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (Linux 3.10.105 xhci-hcd xHCI Host Controller xhci-hcd.0.auto) hub |3-1 0bda:8152:2000 00 2.10 480MBit/s 100mA 2IFs (Realtek USB 10/100 LAN 00E04C361AB0) |__usb4 1d6b:0003:0310 09 3.00 5000MBit/s 0mA 1IF (Linux 3.10.105 xhci-hcd xHCI Host Controller xhci-hcd.0.auto) hub