search

bbqkees / ems-esp-domoticz-plugin

Domoticz plugin for the EMS Wi-Fi Gateway with Proddy's EMS-ESP firmware
MIT License
7 stars 8 forks source link

EMS-ESP 2.0 - doesn`t work #16

Closed sq4bja closed 4 years ago

sq4bja commented 4 years ago

After upgrating EMS-ESP to new 2.0 version, plugin doesn`t work. Only Setpoint temperature is getting from MQTT.

bbqkees commented 4 years ago

Make sure nested json is on. Here it works fine with 2.0.

On Sat, 20 Jun 2020, 18:17 sq4bja, notifications@github.com wrote:

After upgrating EMS-ESP to new 2.0 version, plugin doesn`t work. Only Setpoint temperature is getting from MQTT.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/bbqkees/ems-esp-domoticz-plugin/issues/16, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACSGZAWEEKC7WTPDH4XUA3DRXTOJFANCNFSM4ODOIR3Q .

sq4bja commented 4 years ago

Ok, thanks. Ill test it. Is it not nesssesary to update devices, if im upgrading from 1.9.5?

bbqkees commented 4 years ago

For 2.0 you need to clear the Wemos before uploading the firmware because the memory is dealt with differently. But from the Domoticz side you don't need to change anything. A good option is to test with MQTT explorer so you can see what the topic structure is. It needs to match 1.9.5 but it could be different in a fresh 2.0 so you might need some additional config.

On Sat, 20 Jun 2020, 21:11 sq4bja, notifications@github.com wrote:

Ok, thanks. Ill test it. Is it not nesssesary to update devices, if im upgrading from 1.9.5?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/bbqkees/ems-esp-domoticz-plugin/issues/16#issuecomment-647034766, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACSGZAT5QXVS4FV2EW4QBODRXUCUXANCNFSM4ODOIR3Q .

sq4bja commented 4 years ago

Ok, i have problem with EMS-rail - EMS-ESP cant connect, so MQTT doesnt work... Close.

bbqkees commented 4 years ago

You might need to change the tx-mode. But this is all related to the bèta version of Ems-esp and not the Domoticz plugin so it's beter to ask the questions on that repository.

On Sat, 20 Jun 2020, 22:21 sq4bja, notifications@github.com wrote:

Ok, i have problem with EMS-rail - EMS-ESP cant connect, so MQTT doesnt work... Close.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/bbqkees/ems-esp-domoticz-plugin/issues/16#issuecomment-647041511, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACSGZAQBZTULJYXKDG65PCDRXUK4RANCNFSM4ODOIR3Q .