search

bbqkees / ems-esp-domoticz-plugin

Domoticz plugin for the EMS Wi-Fi Gateway with Proddy's EMS-ESP firmware
MIT License
7 stars 8 forks source link

Some not updated #30

Closed edwin123456 closed 2 years ago

edwin123456 commented 3 years ago

Some parameters do not update After update.

Like : boiler status and some temperature sensors, this stays on time and status from before the update.
258 | EMS bus Wi-Fi Gateway | 0010000E | 14 | TempCvAanvoer | Temp | LaCrosse TX3 | 53.3 C | - | - |   | 2021-01-24   |   | 259 | EMS bus Wi-Fi Gateway | 0010000F | 15 | TempCvRetour | Temp | LaCrosse TX3 | 34.8 C | - | - |   | 2021-01-24 06:27:41   |   | 261 | EMS bus Wi-Fi Gateway | 00100019 | 25 | EMS bus Wi-Fi Gateway - ww selected temperature | Temp | LaCrosse TX3 | 60.0 C | - | - |   2021-01-08 20:08:16   |   | 262 | EMS bus Wi-Fi Gateway | 0010001A | 26 | EMS bus Wi-Fi Gateway - ww desired temperature | Temp | LaCrosse TX3 | 70.0 C | - | - |   2021-01-08 20:08:16   |   | 263 | EMS bus Wi-Fi Gateway | 0010001B | 27 | EMS bus Wi-Fi Gateway - Heating temperature | Temp | LaCrosse TX3 | 75.0 C | - | - |   2021-01-08 20:08:16   |   | 264 | EMS bus Wi-Fi Gateway | 00100012 | 18 | CvCode | General | Text | -H | 2021-01-08 20:08:16

bbqkees commented 3 years ago

After update of what and which version?

edwin123456 commented 3 years ago

Ik bedoel er zijn een aantal parameters die niet updaten Zoals je kunt zien in mijn post. Onder andere de status van de ketel blijft op de oude datum en tijd staan en veranderd dus niet. Dit is zinds de laatste stable update.

Op 24 jan. 2021 om 13:08 heeft Kees notifications@github.com het volgende geschreven:

 After update of what and which version?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

bbqkees commented 3 years ago

laatste stable update van Domoticz of EMS-ESP? De gateway en de machine waar domoticz op draait herstarten. En daarna checken met www.mqtt-explorer.com of de parameters wel updaten in de payload van de mqtt messages.

edwin123456 commented 3 years ago

Hoi Kees, Sorry voor de late reactie Ik heb de laatste stable version Van de ems-esp, deze opnieuw opgestart en ook de raspberry pi en domoticz een aantal keer maar dat helpt niet Heb gekeken via mqtt explorer daar komt alles goed binnen,en word geupdate. Lijkt fout te gaan in de domoticz plugin, daar word oa service code en heating temperature en nog een aantal niet geupdate, Heb je misschien een tip waar ik nog naar kan kijken? Alvast bedankt.

Op 25 jan. 2021 om 11:20 heeft Kees notifications@github.com het volgende geschreven:

 laatste stable update van Domoticz of EMS-ESP? De gateway en de machine waar domoticz op draait herstarten. En daarna checken met www.mqtt-explorer.com of de parameters wel updaten in de payload van de mqtt messages.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

bbqkees commented 3 years ago

Kun je even een payload van boiler_data en ww_data vanuit mqtt explorer hier posten? Waarschijnlijk zijn er her er der weer namen aangepast.

edwin123456 commented 3 years ago

Bedoel je zo?

ems-esp/boiler_data

{"heatingActive":"off","tapwaterActive":"off","selFlowTemp":46,"selBurnPow":40,"curBurnPow":0,"pumpMod":30,"curFlowTemp":43.2,"retTemp":43.1,"switchTemp":0,"sysPress":2.3,"boilTemp":43.1,"burnGas":"off","flameCurr":0,"heatPump":"on","fanWork":"off","ignWork":"off","heatingActivated":"on","heatingTemp":75,"pumpModMax":30,"pumpModMin":30,"pumpDelay":5,"burnMinPeriod":10,"burnMinPower":0,"burnMaxPower":40,"boilHystOn":-6,"boilHystOff":6,"burnStarts":13549,"burnWorkMin":59757,"heatWorkMin":49672,"UBAuptime":689392,"serviceCode":"0Y","serviceCodeNumber":204,"lastCode":"2E(207) 05.12.2020 08:48","maintenanceMessage":" "}

ems-esp/boiler_data_ww

{"wWComfort":"Eco","wWSelTemp":60,"wWSetTemp":0,"wWDisinfectionTemp":70,"wWType":"flow","wWChargeType":"3-way valve","wWCircPump":"off","wWCircPumpMode":"0x3min","wWCirc":"off","wWCurTemp":41.9,"wWCurFlow":0,"wwStorageTemp1":41.9,"wWActivated":"on","wWOneTime":"off","wWDisinfecting":"off","wWCharging":"off","wWRecharging":"off","wWTempOK":"on","wWActive":"off","wWHeat":"off","wWStarts":6080,"wWWorkM":10085}

Mvg Edwin

Op 10 feb. 2021 om 12:48 heeft Kees notifications@github.com het volgende geschreven:

 Kun je even een payload van boiler_data en ww_data vanuit mqtt explorer hier posten? Waarschijnlijk zijn er her er der weer namen aangepast.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

edwin123456 commented 3 years ago

Hoi kees, Ik zag dit ook nog in het Domoticz log:

onMQTTPublish 2021-02-11 10:22:10.422 Error: (EMS bus Wi-Fi Gateway) 'onMessage' failed 'NameError'. 2021-02-11 10:22:10.422 Error: (EMS bus Wi-Fi Gateway) ----> Line 961 in '/home/pi/domoticz/plugins/ems-esp-domoticz-plugin/plugin.py', function onMessage 2021-02-11 10:22:10.422 Error: (EMS bus Wi-Fi Gateway) ----> Line 900 in '/home/pi/domoticz/plugins/ems-esp-domoticz-plugin/plugin.py', function onMessage 2021-02-11 10:22:10.422 Error: (EMS bus Wi-Fi Gateway) ----> Line 113 in '/home/pi/domoticz/plugins/ems-esp-domoticz-plugin/mqtt.py', function onMessage 2021-02-11 10:22:10.422 Error: (EMS bus Wi-Fi Gateway) ----> Line 932 in '/home/pi/domoticz/plugins/ems-esp-domoticz-plugin/plugin.py', function onMQTTPublish 2021-02-11 10:31:01.318 Error: (EMS bus Wi-Fi Gateway) 'onMessage' failed 'NameError'. 2021-02-11 10:31:01.318 Error: (EMS bus Wi-Fi Gateway) ----> Line 961 in '/home/pi/domoticz/plugins/ems-esp-domoticz-plugin/plugin.py', function onMessage 2021-02-11 10:31:01.318 Error: (EMS bus Wi-Fi Gateway) ----> Line 900 in '/home/pi/domoticz/plugins/ems-esp-domoticz-plugin/plugin.py', function onMessage 2021-02-11 10:31:01.318 Error: (EMS bus Wi-Fi Gateway) ----> Line 113 in '/home/pi/domoticz/plugins/ems-esp-domoticz-plugin/mqtt.py', function onMessage

Op 11 feb. 2021 om 08:29 heeft edwin e.vandeplas@upcmail.nl het volgende geschreven:

Bedoel je zo?

ems-esp/boiler_data

{"heatingActive":"off","tapwaterActive":"off","selFlowTemp":46,"selBurnPow":40,"curBurnPow":0,"pumpMod":30,"curFlowTemp":43.2,"retTemp":43.1,"switchTemp":0,"sysPress":2.3,"boilTemp":43.1,"burnGas":"off","flameCurr":0,"heatPump":"on","fanWork":"off","ignWork":"off","heatingActivated":"on","heatingTemp":75,"pumpModMax":30,"pumpModMin":30,"pumpDelay":5,"burnMinPeriod":10,"burnMinPower":0,"burnMaxPower":40,"boilHystOn":-6,"boilHystOff":6,"burnStarts":13549,"burnWorkMin":59757,"heatWorkMin":49672,"UBAuptime":689392,"serviceCode":"0Y","serviceCodeNumber":204,"lastCode":"2E(207) 05.12.2020 08:48","maintenanceMessage":" "}

ems-esp/boiler_data_ww

{"wWComfort":"Eco","wWSelTemp":60,"wWSetTemp":0,"wWDisinfectionTemp":70,"wWType":"flow","wWChargeType":"3-way valve","wWCircPump":"off","wWCircPumpMode":"0x3min","wWCirc":"off","wWCurTemp":41.9,"wWCurFlow":0,"wwStorageTemp1":41.9,"wWActivated":"on","wWOneTime":"off","wWDisinfecting":"off","wWCharging":"off","wWRecharging":"off","wWTempOK":"on","wWActive":"off","wWHeat":"off","wWStarts":6080,"wWWorkM":10085}

Mvg Edwin

Op 10 feb. 2021 om 12:48 heeft Kees notifications@github.com het volgende geschreven:

 Kun je even een payload van boiler_data en ww_data vanuit mqtt explorer hier posten? Waarschijnlijk zijn er her er der weer namen aangepast.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.