Topographic products output in Wrong location

[GoogleCodeExporter]

What steps will reproduce the problem?
1. Lidar .las data file with no projection info: output of height filtering to 
assign ground / non-ground
2. Run the Tools: Analysis==>Create Raster Product ==> Topographic (Bare Earth)
3. Load raster into ArcGis or similar

What is the expected output? What do you see instead?
Expected out put is raster:  This does happen however the output looks as if it 
is shifted downwards so that the top edge of the image is where the bottom edge 
should be.  Attached image demonstrates the problem

What version of the product are you using? On what operating system?
2.x.x on idl virtual machine ver 8.2: Windows 7 professional

Please provide any additional information below.

Original issue reported on code.google.com by justinmc...@gmail.com on 23 Feb 2013 at 2:45

Attachments:

• [BCL_Tiffs_Incorrect Position.png](https://storage.googleapis.com/google-code-attachments/bcal-lidar-tools/issue-6/comment-0/BCL_Tiffs_Incorrect Position.png)

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

Thank you for reporting the issue! There was an error in assigning top-left 
corner in geotiff, which is now fixed with dev6 release. Can you please check 
if the shift in y-axis still happens with your data?

Original comment by shrer...@isu.edu on 4 Mar 2013 at 4:26

[GoogleCodeExporter]

Original comment by shrer...@isu.edu on 4 Mar 2013 at 7:14

• Changed state: Fixed

[GoogleCodeExporter]

Original comment by shrer...@isu.edu on 19 Mar 2013 at 3:53

• Changed state: Verified

[GoogleCodeExporter]

Hi Chaps,
I've checked this with my data and it seems all good.  Cheers.

Original comment by justinmc...@gmail.com on 8 May 2013 at 10:27