Soundflower does not register any input

GoogleCodeExporter commented 8 years ago

What steps will reproduce the problem?
1. Installed Soundflower per instructions
2. Start an audio (iTunes song or streaming audio from internet)
3. Check the vu meter in System Preferences>Sound and note Soundflower is 
selected with no sound
    when I run Audacity nothing records (see second image below)
What is the expected output? What do you see instead?
Expected to see the vu meter going up and down. there is no indication of sound 
input at all. However, I can hear the sound since the Output is directed to my 
internal speakers. If I select soundflower as output I get no sound

What version of the product are you using? On what operating system?
The latest 1.6.2.1  Running on MacBook Pro 15, with Mac OSX 10.7.4

Please provide any additional information below.

 Screen shot of System Prefs with music playing.

 Screen shout of Audacity with no recording

Original issue reported on code.google.com by macpi...@gmail.com on 5 Jun 2012 at 3:52

Attachments:

[Screen Shot 2012-06-05 at 11.49.33 AM.png](https://storage.googleapis.com/google-code-attachments/soundflower/issue-138/comment-0/Screen Shot 2012-06-05 at 11.49.33 AM.png)

GoogleCodeExporter commented 8 years ago

Original comment by macpi...@gmail.com on 5 Jun 2012 at 3:54

Attachments:

[Screen Shot 2012-06-05 at 11.27.11 AM.png](https://storage.googleapis.com/google-code-attachments/soundflower/issue-138/comment-1/Screen Shot 2012-06-05 at 11.27.11 AM.png)

GoogleCodeExporter commented 8 years ago

I have the same problem, not using audacity, but I dont get audio sound with 
these settings. Even when I adjust the volume with keyboard, i see the bar move 
up and down but no sound is passing.

Original comment by morrisdr...@gmail.com on 12 Jun 2012 at 2:38

GoogleCodeExporter commented 8 years ago

I dont know how it worked, but installing AU Labs application fixed the issue 
for me and now soundflower will pass sound through the audio output. All I did 
was install the AU Labs software, open it once and then set the audio input and 
output to soundflower 2ch, and be sure built in output was selected in the 
soundflower application and it worked. 

Seems to have fixed the issue, AU Labs doesnt even have to be running.

http://osxdaily.com/2012/05/18/equalizer-for-all-audio-mac-os-x/

Original comment by morrisdr...@gmail.com on 13 Jun 2012 at 12:04

bcmdrummer / soundflower

Soundflower does not register any input #138