search

bcube-project / Bcube.jl

MIT License
5 stars 2 forks source link

Better hypersurface support #99

Closed ghislainb closed 5 months ago

github-actions[bot] commented 5 months ago

Benchmark Results

main 59312ed0e7868b... main/59312ed0e7868b...
assemble/basic bilinear/mass matrix 16 ± 1.5 ms 15.9 ± 0.15 ms 1.01
assemble/basic bilinear/stiffness matrix 0.0814 ± 0.0037 s 0.0789 ± 0.00028 s 1.03
assemble/poisson DG/AffineFESystem 0.0532 ± 0.0069 s 0.0542 ± 0.0074 s 0.981
assemble/poisson DG/a_Γ(u, v) 0.0377 ± 0.0061 s 0.0388 ± 0.0065 s 0.972
assemble/poisson DG/a_Γb(u, v) 7.53 ± 0.14 ms 7.91 ± 0.17 ms 0.952
assemble/poisson DG/a_Ω(u, v) 7.68 ± 0.046 ms 7.82 ± 0.025 ms 0.982
assemble/poisson DG/l_Γb(v) 0.12 ± 0.028 ms 0.117 ± 0.014 ms 1.03
assemble/poisson DG/l_Ω(v) 15.9 ± 0.21 μs 12.9 ± 1.4 μs 1.24
covo/Quad/explicit_step 0.0822 ± 0.0036 s 0.0819 ± 0.0013 s 1
covo/Quad/integral_surface 0.0528 ± 0.00057 s 0.0526 ± 0.00033 s 1
covo/Quad/integral_volume 20 ± 0.064 ms 21.1 ± 0.068 ms 0.951
covo/TriQuad/explicit_step 0.399 ± 0.017 s 0.412 ± 0.032 s 0.969
covo/TriQuad/integral_surface 0.303 ± 0.0013 s 0.316 ± 0.0042 s 0.957
covo/TriQuad/integral_volume 0.0769 ± 0.0033 s 0.0785 ± 0.002 s 0.98
entities/edges2nodes 1.55 ± 0.01 ns 1.56 ± 0.01 ns 0.995
entities/nedges 1.55 ± 0.01 ns 1.55 ± 0.01 ns 1
entities/nnodes 3.11 ± 0.01 ns 3.11 ± 0.01 ns 1
entities/nodes 1.56 ± 0.01 ns 1.55 ± 0.01 ns 1.01
mesh/todo 1.55 ± 0.01 ns 1.56 ± 0.01 ns 0.994
time_to_load 3.26 ± 0.04 s 3.28 ± 0.0074 s 0.991

Benchmark Plots

A plot of the benchmark results have been uploaded as an artifact to the workflow run for this PR. Go to "Actions"->"Benchmark a pull request"->[the most recent run]->"Artifacts" (at the bottom).

github-actions[bot] commented 5 months ago
Benchmark result # Judge result # Benchmark Report for */home/runner/work/Bcube.jl/Bcube.jl* ## Job Properties * Time of benchmarks: - Target: 16 May 2024 - 13:50 - Baseline: 16 May 2024 - 13:53 * Package commits: - Target: b65372 - Baseline: 53336e * Julia commits: - Target: 0b4590 - Baseline: 0b4590 * Julia command flags: - Target: None - Baseline: None * Environment variables: - Target: None - Baseline: None ## Results A ratio greater than `1.0` denotes a possible regression (marked with :x:), while a ratio less than `1.0` denotes a possible improvement (marked with :white_check_mark:). Only significant results - results that indicate possible regressions or improvements - are shown below (thus, an empty table means that all benchmark results remained invariant between builds). | ID | time ratio | memory ratio | |------------------------------------------------------|------------------------------|--------------| | `["assemble", "basic bilinear", "stiffness matrix"]` | 0.86 (5%) :white_check_mark: | 1.00 (1%) | | `["covo", "Quad", "integral_volume"]` | 0.92 (5%) :white_check_mark: | 1.00 (1%) | ## Benchmark Group List Here's a list of all the benchmark groups executed by this job: - `["assemble", "basic bilinear"]` - `["assemble", "poisson DG"]` - `["covo", "Quad"]` - `["covo", "TriQuad"]` - `["entities"]` - `["mesh"]` ## Julia versioninfo ### Target ``` Julia Version 1.10.3 Commit 0b4590a5507 (2024-04-30 10:59 UTC) Build Info: Official https://julialang.org/ release Platform Info: OS: Linux (x86_64-linux-gnu) Ubuntu 22.04.4 LTS uname: Linux 6.5.0-1021-azure #22~22.04.1-Ubuntu SMP Tue Apr 30 16:08:18 UTC 2024 x86_64 x86_64 CPU: AMD EPYC 7763 64-Core Processor: speed user nice sys idle irq #1 2445 MHz 1771 s 0 s 224 s 5084 s 0 s #2 3025 MHz 2803 s 0 s 269 s 4011 s 0 s #3 3243 MHz 1600 s 0 s 216 s 5264 s 0 s #4 3244 MHz 1535 s 0 s 223 s 5326 s 0 s Memory: 15.606502532958984 GB (12343.9921875 MB free) Uptime: 712.22 sec Load Avg: 1.05 1.22 0.75 WORD_SIZE: 64 LIBM: libopenlibm LLVM: libLLVM-15.0.7 (ORCJIT, znver3) Threads: 1 default, 0 interactive, 1 GC (on 4 virtual cores) ``` ### Baseline ``` Julia Version 1.10.3 Commit 0b4590a5507 (2024-04-30 10:59 UTC) Build Info: Official https://julialang.org/ release Platform Info: OS: Linux (x86_64-linux-gnu) Ubuntu 22.04.4 LTS uname: Linux 6.5.0-1021-azure #22~22.04.1-Ubuntu SMP Tue Apr 30 16:08:18 UTC 2024 x86_64 x86_64 CPU: AMD EPYC 7763 64-Core Processor: speed user nice sys idle irq #1 2607 MHz 2220 s 0 s 269 s 6572 s 0 s #2 3182 MHz 4083 s 0 s 337 s 4648 s 0 s #3 3243 MHz 1664 s 0 s 249 s 7149 s 0 s #4 2756 MHz 1639 s 0 s 256 s 7172 s 0 s Memory: 15.606502532958984 GB (12497.9609375 MB free) Uptime: 910.9 sec Load Avg: 1.02 1.13 0.82 WORD_SIZE: 64 LIBM: libopenlibm LLVM: libLLVM-15.0.7 (ORCJIT, znver3) Threads: 1 default, 0 interactive, 1 GC (on 4 virtual cores) ``` --- # Target result # Benchmark Report for */home/runner/work/Bcube.jl/Bcube.jl* ## Job Properties * Time of benchmark: 16 May 2024 - 13:50 * Package commit: b65372 * Julia commit: 0b4590 * Julia command flags: None * Environment variables: None ## Results Below is a table of this job's results, obtained by running the benchmarks. The values listed in the `ID` column have the structure `[parent_group, child_group, ..., key]`, and can be used to index into the BaseBenchmarks suite to retrieve the corresponding benchmarks. The percentages accompanying time and memory values in the below table are noise tolerances. The "true" time/memory value for a given benchmark is expected to fall within this percentage of the reported value. An empty cell means that the value was zero. | ID | time | GC time | memory | allocations | |------------------------------------------------------|----------------:|----------:|----------------:|------------:| | `["assemble", "basic bilinear", "mass matrix"]` | 16.275 ms (5%) | | 13.20 MiB (1%) | 51 | | `["assemble", "basic bilinear", "stiffness matrix"]` | 82.421 ms (5%) | | 13.20 MiB (1%) | 51 | | `["assemble", "poisson DG", "AffineFESystem"]` | 52.900 ms (5%) | | 71.64 MiB (1%) | 17155 | | `["assemble", "poisson DG", "a_Γ(u, v)"]` | 37.535 ms (5%) | | 59.32 MiB (1%) | 13065 | | `["assemble", "poisson DG", "a_Γb(u, v)"]` | 7.267 ms (5%) | | 10.79 MiB (1%) | 3163 | | `["assemble", "poisson DG", "a_Ω(u, v)"]` | 7.775 ms (5%) | | 308.81 KiB (1%) | 29 | | `["assemble", "poisson DG", "l_Γb(v)"]` | 64.030 μs (5%) | | 139.38 KiB (1%) | 929 | | `["assemble", "poisson DG", "l_Ω(v)"]` | 12.443 μs (5%) | | 2.12 KiB (1%) | 1 | | `["covo", "Quad", "explicit_step"]` | 80.034 ms (5%) | | 34.31 MiB (1%) | 4926 | | `["covo", "Quad", "integral_surface"]` | 51.535 ms (5%) | | | | | `["covo", "Quad", "integral_volume"]` | 20.378 ms (5%) | | | | | `["covo", "TriQuad", "explicit_step"]` | 387.098 ms (5%) | 26.998 ms | 348.52 MiB (1%) | 1813364 | | `["covo", "TriQuad", "integral_surface"]` | 285.613 ms (5%) | | 234.44 MiB (1%) | 1424064 | | `["covo", "TriQuad", "integral_volume"]` | 61.824 ms (5%) | | 51.71 MiB (1%) | 379526 | | `["entities", "edges2nodes"]` | 1.552 ns (5%) | | | | | `["entities", "nedges"]` | 1.552 ns (5%) | | | | | `["entities", "nnodes"]` | 3.095 ns (5%) | | | | | `["entities", "nodes"]` | 1.552 ns (5%) | | | | | `["mesh", "todo"]` | 1.552 ns (5%) | | | | ## Benchmark Group List Here's a list of all the benchmark groups executed by this job: - `["assemble", "basic bilinear"]` - `["assemble", "poisson DG"]` - `["covo", "Quad"]` - `["covo", "TriQuad"]` - `["entities"]` - `["mesh"]` ## Julia versioninfo ``` Julia Version 1.10.3 Commit 0b4590a5507 (2024-04-30 10:59 UTC) Build Info: Official https://julialang.org/ release Platform Info: OS: Linux (x86_64-linux-gnu) Ubuntu 22.04.4 LTS uname: Linux 6.5.0-1021-azure #22~22.04.1-Ubuntu SMP Tue Apr 30 16:08:18 UTC 2024 x86_64 x86_64 CPU: AMD EPYC 7763 64-Core Processor: speed user nice sys idle irq #1 2445 MHz 1771 s 0 s 224 s 5084 s 0 s #2 3025 MHz 2803 s 0 s 269 s 4011 s 0 s #3 3243 MHz 1600 s 0 s 216 s 5264 s 0 s #4 3244 MHz 1535 s 0 s 223 s 5326 s 0 s Memory: 15.606502532958984 GB (12343.9921875 MB free) Uptime: 712.22 sec Load Avg: 1.05 1.22 0.75 WORD_SIZE: 64 LIBM: libopenlibm LLVM: libLLVM-15.0.7 (ORCJIT, znver3) Threads: 1 default, 0 interactive, 1 GC (on 4 virtual cores) ``` --- # Baseline result # Benchmark Report for */home/runner/work/Bcube.jl/Bcube.jl* ## Job Properties * Time of benchmark: 16 May 2024 - 13:53 * Package commit: 53336e * Julia commit: 0b4590 * Julia command flags: None * Environment variables: None ## Results Below is a table of this job's results, obtained by running the benchmarks. The values listed in the `ID` column have the structure `[parent_group, child_group, ..., key]`, and can be used to index into the BaseBenchmarks suite to retrieve the corresponding benchmarks. The percentages accompanying time and memory values in the below table are noise tolerances. The "true" time/memory value for a given benchmark is expected to fall within this percentage of the reported value. An empty cell means that the value was zero. | ID | time | GC time | memory | allocations | |------------------------------------------------------|----------------:|----------:|----------------:|------------:| | `["assemble", "basic bilinear", "mass matrix"]` | 15.771 ms (5%) | | 13.20 MiB (1%) | 51 | | `["assemble", "basic bilinear", "stiffness matrix"]` | 96.381 ms (5%) | | 13.20 MiB (1%) | 51 | | `["assemble", "poisson DG", "AffineFESystem"]` | 53.698 ms (5%) | | 71.64 MiB (1%) | 17155 | | `["assemble", "poisson DG", "a_Γ(u, v)"]` | 37.803 ms (5%) | | 59.32 MiB (1%) | 13065 | | `["assemble", "poisson DG", "a_Γb(u, v)"]` | 7.282 ms (5%) | | 10.79 MiB (1%) | 3163 | | `["assemble", "poisson DG", "a_Ω(u, v)"]` | 7.831 ms (5%) | | 308.81 KiB (1%) | 29 | | `["assemble", "poisson DG", "l_Γb(v)"]` | 62.237 μs (5%) | | 139.38 KiB (1%) | 929 | | `["assemble", "poisson DG", "l_Ω(v)"]` | 12.443 μs (5%) | | 2.12 KiB (1%) | 1 | | `["covo", "Quad", "explicit_step"]` | 81.272 ms (5%) | | 34.31 MiB (1%) | 4926 | | `["covo", "Quad", "integral_surface"]` | 52.046 ms (5%) | | | | | `["covo", "Quad", "integral_volume"]` | 22.224 ms (5%) | | | | | `["covo", "TriQuad", "explicit_step"]` | 378.137 ms (5%) | 26.624 ms | 348.52 MiB (1%) | 1813364 | | `["covo", "TriQuad", "integral_surface"]` | 280.767 ms (5%) | | 234.44 MiB (1%) | 1424064 | | `["covo", "TriQuad", "integral_volume"]` | 61.170 ms (5%) | | 51.71 MiB (1%) | 379526 | | `["entities", "edges2nodes"]` | 1.552 ns (5%) | | | | | `["entities", "nedges"]` | 1.552 ns (5%) | | | | | `["entities", "nnodes"]` | 3.095 ns (5%) | | | | | `["entities", "nodes"]` | 1.552 ns (5%) | | | | | `["mesh", "todo"]` | 1.552 ns (5%) | | | | ## Benchmark Group List Here's a list of all the benchmark groups executed by this job: - `["assemble", "basic bilinear"]` - `["assemble", "poisson DG"]` - `["covo", "Quad"]` - `["covo", "TriQuad"]` - `["entities"]` - `["mesh"]` ## Julia versioninfo ``` Julia Version 1.10.3 Commit 0b4590a5507 (2024-04-30 10:59 UTC) Build Info: Official https://julialang.org/ release Platform Info: OS: Linux (x86_64-linux-gnu) Ubuntu 22.04.4 LTS uname: Linux 6.5.0-1021-azure #22~22.04.1-Ubuntu SMP Tue Apr 30 16:08:18 UTC 2024 x86_64 x86_64 CPU: AMD EPYC 7763 64-Core Processor: speed user nice sys idle irq #1 2607 MHz 2220 s 0 s 269 s 6572 s 0 s #2 3182 MHz 4083 s 0 s 337 s 4648 s 0 s #3 3243 MHz 1664 s 0 s 249 s 7149 s 0 s #4 2756 MHz 1639 s 0 s 256 s 7172 s 0 s Memory: 15.606502532958984 GB (12497.9609375 MB free) Uptime: 910.9 sec Load Avg: 1.02 1.13 0.82 WORD_SIZE: 64 LIBM: libopenlibm LLVM: libLLVM-15.0.7 (ORCJIT, znver3) Threads: 1 default, 0 interactive, 1 GC (on 4 virtual cores) ``` --- # Runtime information | Runtime Info | | |:--|:--| | BLAS #threads | 2 | | `BLAS.vendor()` | `lbt` | | `Sys.CPU_THREADS` | 4 | `lscpu` output: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Address sizes: 48 bits physical, 48 bits virtual Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Vendor ID: AuthenticAMD Model name: AMD EPYC 7763 64-Core Processor CPU family: 25 Model: 1 Thread(s) per core: 2 Core(s) per socket: 2 Socket(s): 1 Stepping: 1 BogoMIPS: 4890.86 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl tsc_reliable nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy svm cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw topoext invpcid_single vmmcall fsgsbase bmi1 avx2 smep bmi2 erms invpcid rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves clzero xsaveerptr rdpru arat npt nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold v_vmsave_vmload umip vaes vpclmulqdq rdpid fsrm Virtualization: AMD-V Hypervisor vendor: Microsoft Virtualization type: full L1d cache: 64 KiB (2 instances) L1i cache: 64 KiB (2 instances) L2 cache: 1 MiB (2 instances) L3 cache: 32 MiB (1 instance) NUMA node(s): 1 NUMA node0 CPU(s): 0-3 Vulnerability Gather data sampling: Not affected Vulnerability Itlb multihit: Not affected Vulnerability L1tf: Not affected Vulnerability Mds: Not affected Vulnerability Meltdown: Not affected Vulnerability Mmio stale data: Not affected Vulnerability Retbleed: Not affected Vulnerability Spec rstack overflow: Vulnerable: Safe RET, no microcode Vulnerability Spec store bypass: Vulnerable Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization Vulnerability Spectre v2: Mitigation; Retpolines; STIBP disabled; RSB filling; PBRSB-eIBRS Not affected; BHI Not affected Vulnerability Srbds: Not affected Vulnerability Tsx async abort: Not affected | Cpu Property | Value | |:------------------ |:---------------------------------------------------------- | | Brand | AMD EPYC 7763 64-Core Processor | | Vendor | :AMD | | Architecture | :Unknown | | Model | Family: 0xaf, Model: 0x01, Stepping: 0x01, Type: 0x00 | | Cores | 16 physical cores, 16 logical cores (on executing CPU) | | | No Hyperthreading hardware capability detected | | Clock Frequencies | Not supported by CPU | | Data Cache | Level 1:3 : (32, 512, 32768) kbytes | | | 64 byte cache line size | | Address Size | 48 bits virtual, 48 bits physical | | SIMD | 256 bit = 32 byte max. SIMD vector size | | Time Stamp Counter | TSC is accessible via `rdtsc` | | | TSC runs at constant rate (invariant from clock frequency) | | Perf. Monitoring | Performance Monitoring Counters (PMC) are not supported | | Hypervisor | Yes, Microsoft |
github-actions[bot] commented 5 months ago
Benchmark result # Judge result # Benchmark Report for */home/runner/work/Bcube.jl/Bcube.jl* ## Job Properties * Time of benchmarks: - Target: 16 May 2024 - 15:35 - Baseline: 16 May 2024 - 15:38 * Package commits: - Target: 21449d - Baseline: 53336e * Julia commits: - Target: 0b4590 - Baseline: 0b4590 * Julia command flags: - Target: None - Baseline: None * Environment variables: - Target: None - Baseline: None ## Results A ratio greater than `1.0` denotes a possible regression (marked with :x:), while a ratio less than `1.0` denotes a possible improvement (marked with :white_check_mark:). Only significant results - results that indicate possible regressions or improvements - are shown below (thus, an empty table means that all benchmark results remained invariant between builds). | ID | time ratio | memory ratio | |------------------------------------------------------|------------------------------|--------------| | `["assemble", "basic bilinear", "stiffness matrix"]` | 1.27 (5%) :x: | 1.00 (1%) | | `["covo", "Quad", "integral_volume"]` | 1.12 (5%) :x: | 1.00 (1%) | | `["entities", "nnodes"]` | 0.91 (5%) :white_check_mark: | 1.00 (1%) | ## Benchmark Group List Here's a list of all the benchmark groups executed by this job: - `["assemble", "basic bilinear"]` - `["assemble", "poisson DG"]` - `["covo", "Quad"]` - `["covo", "TriQuad"]` - `["entities"]` - `["mesh"]` ## Julia versioninfo ### Target ``` Julia Version 1.10.3 Commit 0b4590a5507 (2024-04-30 10:59 UTC) Build Info: Official https://julialang.org/ release Platform Info: OS: Linux (x86_64-linux-gnu) Ubuntu 22.04.4 LTS uname: Linux 6.5.0-1021-azure #22~22.04.1-Ubuntu SMP Tue Apr 30 16:08:18 UTC 2024 x86_64 x86_64 CPU: AMD EPYC 7763 64-Core Processor: speed user nice sys idle irq #1 3242 MHz 1923 s 0 s 236 s 3681 s 0 s #2 2944 MHz 2631 s 0 s 231 s 2973 s 0 s #3 2555 MHz 1610 s 0 s 224 s 4000 s 0 s #4 2594 MHz 1513 s 0 s 227 s 4092 s 0 s Memory: 15.606502532958984 GB (12240.1015625 MB free) Uptime: 587.84 sec Load Avg: 1.01 1.19 0.75 WORD_SIZE: 64 LIBM: libopenlibm LLVM: libLLVM-15.0.7 (ORCJIT, znver3) Threads: 1 default, 0 interactive, 1 GC (on 4 virtual cores) ``` ### Baseline ``` Julia Version 1.10.3 Commit 0b4590a5507 (2024-04-30 10:59 UTC) Build Info: Official https://julialang.org/ release Platform Info: OS: Linux (x86_64-linux-gnu) Ubuntu 22.04.4 LTS uname: Linux 6.5.0-1021-azure #22~22.04.1-Ubuntu SMP Tue Apr 30 16:08:18 UTC 2024 x86_64 x86_64 CPU: AMD EPYC 7763 64-Core Processor: speed user nice sys idle irq #1 3216 MHz 2427 s 0 s 283 s 5102 s 0 s #2 2974 MHz 2777 s 0 s 268 s 4762 s 0 s #3 3243 MHz 2226 s 0 s 280 s 5302 s 0 s #4 2445 MHz 2124 s 0 s 280 s 5402 s 0 s Memory: 15.606502532958984 GB (12388.59765625 MB free) Uptime: 785.48 sec Load Avg: 1.04 1.11 0.81 WORD_SIZE: 64 LIBM: libopenlibm LLVM: libLLVM-15.0.7 (ORCJIT, znver3) Threads: 1 default, 0 interactive, 1 GC (on 4 virtual cores) ``` --- # Target result # Benchmark Report for */home/runner/work/Bcube.jl/Bcube.jl* ## Job Properties * Time of benchmark: 16 May 2024 - 15:35 * Package commit: 21449d * Julia commit: 0b4590 * Julia command flags: None * Environment variables: None ## Results Below is a table of this job's results, obtained by running the benchmarks. The values listed in the `ID` column have the structure `[parent_group, child_group, ..., key]`, and can be used to index into the BaseBenchmarks suite to retrieve the corresponding benchmarks. The percentages accompanying time and memory values in the below table are noise tolerances. The "true" time/memory value for a given benchmark is expected to fall within this percentage of the reported value. An empty cell means that the value was zero. | ID | time | GC time | memory | allocations | |------------------------------------------------------|----------------:|----------:|----------------:|------------:| | `["assemble", "basic bilinear", "mass matrix"]` | 15.777 ms (5%) | | 13.20 MiB (1%) | 51 | | `["assemble", "basic bilinear", "stiffness matrix"]` | 100.432 ms (5%) | | 13.20 MiB (1%) | 51 | | `["assemble", "poisson DG", "AffineFESystem"]` | 52.598 ms (5%) | | 71.64 MiB (1%) | 17155 | | `["assemble", "poisson DG", "a_Γ(u, v)"]` | 37.250 ms (5%) | | 59.32 MiB (1%) | 13065 | | `["assemble", "poisson DG", "a_Γb(u, v)"]` | 7.191 ms (5%) | | 10.79 MiB (1%) | 3163 | | `["assemble", "poisson DG", "a_Ω(u, v)"]` | 7.698 ms (5%) | | 308.81 KiB (1%) | 29 | | `["assemble", "poisson DG", "l_Γb(v)"]` | 59.641 μs (5%) | | 139.38 KiB (1%) | 929 | | `["assemble", "poisson DG", "l_Ω(v)"]` | 12.333 μs (5%) | | 2.12 KiB (1%) | 1 | | `["covo", "Quad", "explicit_step"]` | 80.298 ms (5%) | | 34.31 MiB (1%) | 4926 | | `["covo", "Quad", "integral_surface"]` | 51.009 ms (5%) | | | | | `["covo", "Quad", "integral_volume"]` | 22.531 ms (5%) | | | | | `["covo", "TriQuad", "explicit_step"]` | 375.664 ms (5%) | 25.689 ms | 348.52 MiB (1%) | 1813362 | | `["covo", "TriQuad", "integral_surface"]` | 274.396 ms (5%) | | 234.44 MiB (1%) | 1424064 | | `["covo", "TriQuad", "integral_volume"]` | 61.150 ms (5%) | | 51.71 MiB (1%) | 379526 | | `["entities", "edges2nodes"]` | 1.552 ns (5%) | | | | | `["entities", "nedges"]` | 1.552 ns (5%) | | | | | `["entities", "nnodes"]` | 3.095 ns (5%) | | | | | `["entities", "nodes"]` | 1.552 ns (5%) | | | | | `["mesh", "todo"]` | 1.552 ns (5%) | | | | ## Benchmark Group List Here's a list of all the benchmark groups executed by this job: - `["assemble", "basic bilinear"]` - `["assemble", "poisson DG"]` - `["covo", "Quad"]` - `["covo", "TriQuad"]` - `["entities"]` - `["mesh"]` ## Julia versioninfo ``` Julia Version 1.10.3 Commit 0b4590a5507 (2024-04-30 10:59 UTC) Build Info: Official https://julialang.org/ release Platform Info: OS: Linux (x86_64-linux-gnu) Ubuntu 22.04.4 LTS uname: Linux 6.5.0-1021-azure #22~22.04.1-Ubuntu SMP Tue Apr 30 16:08:18 UTC 2024 x86_64 x86_64 CPU: AMD EPYC 7763 64-Core Processor: speed user nice sys idle irq #1 3242 MHz 1923 s 0 s 236 s 3681 s 0 s #2 2944 MHz 2631 s 0 s 231 s 2973 s 0 s #3 2555 MHz 1610 s 0 s 224 s 4000 s 0 s #4 2594 MHz 1513 s 0 s 227 s 4092 s 0 s Memory: 15.606502532958984 GB (12240.1015625 MB free) Uptime: 587.84 sec Load Avg: 1.01 1.19 0.75 WORD_SIZE: 64 LIBM: libopenlibm LLVM: libLLVM-15.0.7 (ORCJIT, znver3) Threads: 1 default, 0 interactive, 1 GC (on 4 virtual cores) ``` --- # Baseline result # Benchmark Report for */home/runner/work/Bcube.jl/Bcube.jl* ## Job Properties * Time of benchmark: 16 May 2024 - 15:38 * Package commit: 53336e * Julia commit: 0b4590 * Julia command flags: None * Environment variables: None ## Results Below is a table of this job's results, obtained by running the benchmarks. The values listed in the `ID` column have the structure `[parent_group, child_group, ..., key]`, and can be used to index into the BaseBenchmarks suite to retrieve the corresponding benchmarks. The percentages accompanying time and memory values in the below table are noise tolerances. The "true" time/memory value for a given benchmark is expected to fall within this percentage of the reported value. An empty cell means that the value was zero. | ID | time | GC time | memory | allocations | |------------------------------------------------------|----------------:|----------:|----------------:|------------:| | `["assemble", "basic bilinear", "mass matrix"]` | 15.711 ms (5%) | | 13.20 MiB (1%) | 51 | | `["assemble", "basic bilinear", "stiffness matrix"]` | 78.803 ms (5%) | | 13.20 MiB (1%) | 51 | | `["assemble", "poisson DG", "AffineFESystem"]` | 53.432 ms (5%) | | 71.64 MiB (1%) | 17155 | | `["assemble", "poisson DG", "a_Γ(u, v)"]` | 37.254 ms (5%) | | 59.32 MiB (1%) | 13065 | | `["assemble", "poisson DG", "a_Γb(u, v)"]` | 7.308 ms (5%) | | 10.79 MiB (1%) | 3163 | | `["assemble", "poisson DG", "a_Ω(u, v)"]` | 7.850 ms (5%) | | 308.81 KiB (1%) | 29 | | `["assemble", "poisson DG", "l_Γb(v)"]` | 58.228 μs (5%) | | 139.38 KiB (1%) | 929 | | `["assemble", "poisson DG", "l_Ω(v)"]` | 12.464 μs (5%) | | 2.12 KiB (1%) | 1 | | `["covo", "Quad", "explicit_step"]` | 80.885 ms (5%) | | 34.31 MiB (1%) | 4926 | | `["covo", "Quad", "integral_surface"]` | 50.619 ms (5%) | | | | | `["covo", "Quad", "integral_volume"]` | 20.183 ms (5%) | | | | | `["covo", "TriQuad", "explicit_step"]` | 383.607 ms (5%) | 27.268 ms | 348.52 MiB (1%) | 1813364 | | `["covo", "TriQuad", "integral_surface"]` | 279.638 ms (5%) | | 234.44 MiB (1%) | 1424064 | | `["covo", "TriQuad", "integral_volume"]` | 61.656 ms (5%) | | 51.71 MiB (1%) | 379526 | | `["entities", "edges2nodes"]` | 1.552 ns (5%) | | | | | `["entities", "nedges"]` | 1.552 ns (5%) | | | | | `["entities", "nnodes"]` | 3.396 ns (5%) | | | | | `["entities", "nodes"]` | 1.552 ns (5%) | | | | | `["mesh", "todo"]` | 1.552 ns (5%) | | | | ## Benchmark Group List Here's a list of all the benchmark groups executed by this job: - `["assemble", "basic bilinear"]` - `["assemble", "poisson DG"]` - `["covo", "Quad"]` - `["covo", "TriQuad"]` - `["entities"]` - `["mesh"]` ## Julia versioninfo ``` Julia Version 1.10.3 Commit 0b4590a5507 (2024-04-30 10:59 UTC) Build Info: Official https://julialang.org/ release Platform Info: OS: Linux (x86_64-linux-gnu) Ubuntu 22.04.4 LTS uname: Linux 6.5.0-1021-azure #22~22.04.1-Ubuntu SMP Tue Apr 30 16:08:18 UTC 2024 x86_64 x86_64 CPU: AMD EPYC 7763 64-Core Processor: speed user nice sys idle irq #1 3216 MHz 2427 s 0 s 283 s 5102 s 0 s #2 2974 MHz 2777 s 0 s 268 s 4762 s 0 s #3 3243 MHz 2226 s 0 s 280 s 5302 s 0 s #4 2445 MHz 2124 s 0 s 280 s 5402 s 0 s Memory: 15.606502532958984 GB (12388.59765625 MB free) Uptime: 785.48 sec Load Avg: 1.04 1.11 0.81 WORD_SIZE: 64 LIBM: libopenlibm LLVM: libLLVM-15.0.7 (ORCJIT, znver3) Threads: 1 default, 0 interactive, 1 GC (on 4 virtual cores) ``` --- # Runtime information | Runtime Info | | |:--|:--| | BLAS #threads | 2 | | `BLAS.vendor()` | `lbt` | | `Sys.CPU_THREADS` | 4 | `lscpu` output: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Address sizes: 48 bits physical, 48 bits virtual Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Vendor ID: AuthenticAMD Model name: AMD EPYC 7763 64-Core Processor CPU family: 25 Model: 1 Thread(s) per core: 2 Core(s) per socket: 2 Socket(s): 1 Stepping: 1 BogoMIPS: 4890.85 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl tsc_reliable nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy svm cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw topoext invpcid_single vmmcall fsgsbase bmi1 avx2 smep bmi2 erms invpcid rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves clzero xsaveerptr rdpru arat npt nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold v_vmsave_vmload umip vaes vpclmulqdq rdpid fsrm Virtualization: AMD-V Hypervisor vendor: Microsoft Virtualization type: full L1d cache: 64 KiB (2 instances) L1i cache: 64 KiB (2 instances) L2 cache: 1 MiB (2 instances) L3 cache: 32 MiB (1 instance) NUMA node(s): 1 NUMA node0 CPU(s): 0-3 Vulnerability Gather data sampling: Not affected Vulnerability Itlb multihit: Not affected Vulnerability L1tf: Not affected Vulnerability Mds: Not affected Vulnerability Meltdown: Not affected Vulnerability Mmio stale data: Not affected Vulnerability Retbleed: Not affected Vulnerability Spec rstack overflow: Vulnerable: Safe RET, no microcode Vulnerability Spec store bypass: Vulnerable Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization Vulnerability Spectre v2: Mitigation; Retpolines; STIBP disabled; RSB filling; PBRSB-eIBRS Not affected; BHI Not affected Vulnerability Srbds: Not affected Vulnerability Tsx async abort: Not affected | Cpu Property | Value | |:------------------ |:---------------------------------------------------------- | | Brand | AMD EPYC 7763 64-Core Processor | | Vendor | :AMD | | Architecture | :Unknown | | Model | Family: 0xaf, Model: 0x01, Stepping: 0x01, Type: 0x00 | | Cores | 16 physical cores, 16 logical cores (on executing CPU) | | | No Hyperthreading hardware capability detected | | Clock Frequencies | Not supported by CPU | | Data Cache | Level 1:3 : (32, 512, 32768) kbytes | | | 64 byte cache line size | | Address Size | 48 bits virtual, 48 bits physical | | SIMD | 256 bit = 32 byte max. SIMD vector size | | Time Stamp Counter | TSC is accessible via `rdtsc` | | | TSC runs at constant rate (invariant from clock frequency) | | Perf. Monitoring | Performance Monitoring Counters (PMC) are not supported | | Hypervisor | Yes, Microsoft |