leamas
commented
4 years ago We had some problems in the flatpak build related to the libusb version. You might want to check by using the binary from the flatpak/ dir installed in ~/.local/lib or ~/.local/lib/opencpn.
Edit: Although bleeding edge, if oesenc is the only plugin you need you might also want to try the flatpak build. See for example https://github.com/OpenCPN/OpenCPN/issues/1729
While I can get (with some hitches) the Dongle to work on OpenSUSE 15.0, I fail systematically under OpenSUSE 42.3 (see Screenshot)
I did not find any missing lib with ldd with oeserverd. Dongle is well detected by Linux. The Journal indicates that oeserverd core dumped. As this is a closed code, I cannot do much. oeservered works fine when the Dongle is not present and give me access to my chart set which is linked to my finger print.
Any clue how to debug that issue which is specific to that release of OpenSUSE and so linked to the environment ?
---------------- Journalctrl extract core dump -------------- juil. 03 13:25:49 linux-fkwb.suse systemd-coredump[5125]: Failed to generate stack trace: Unwinding not supported for this architecture juil. 03 13:25:49 linux-fkwb.suse systemd-coredump[5125]: Process 5123 (oeserverd) of user 3204 dumped core.
------------- Journalctrl Dongle detection ------------------ juil. 03 13:34:23 linux-fkwb.suse kernel: usb 1-2: new full-speed USB device number 7 using xhci_hcd juil. 03 13:34:23 linux-fkwb.suse kernel: usb 1-2: New USB device found, idVendor=1547, idProduct=1000 juil. 03 13:34:23 linux-fkwb.suse kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 juil. 03 13:34:23 linux-fkwb.suse kernel: usb 1-2: Product: SG-Lock USB Key juil. 03 13:34:23 linux-fkwb.suse kernel: usb 1-2: Manufacturer: SG-Lock juil. 03 13:34:23 linux-fkwb.suse kernel: hid-generic 0003:1547:1000.0008: hiddev0,hidraw0: USB HID v1.00 Device [SG-Lock SG-Lock USB Key] on usb-0000:00:14.0-2/input0 juil. 03 13:34:23 linux-fkwb.suse mtp-probe[5288]: checking bus 1, device 7: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2" juil. 03 13:34:23 linux-fkwb.suse mtp-probe[5288]: bus: 1, device: 7 was not an MTP device
--------------- log without Dongle ------------ 3:21:17 CEST: validate_SENC_server 13:21:17 CEST: oesenc_pi: Checking oeserverd utility at {/usr/bin/oeserverd} 13:21:17 CEST: oesenc_pi: starting oeserverd utility: /usr/bin/oeserverd 13:21:18 CEST: oesenc_pi: oeserverd Check OK...LoopCount: 3
------------------- log with Dongle ------------------- 13:25:53 CEST: Initializing Chart /home/dominig/CartesOpenCPN/cartes/OeSENC/southerly100-FRatl-2018-22/OC-33-070176.oesenc 13:25:53 CEST: processChartInfo /home/dominig/CartesOpenCPN/cartes/OeSENC/southerly100-FRatl-2018-22/OC-33-070176.oesenc 13:25:53 CEST: validate_SENC_server 13:25:53 CEST: oesenc_pi: Checking oeserverd utility at {}