search

bdureau / RocketMotorPIDGimbal

This is yet again another attempt to fly a model rocket without fins using long burn motors.
22 stars 7 forks source link

Problem with installing the libraries. #1

Open Monses34 opened 4 years ago

Monses34 commented 4 years ago

Is there a way to load the whole project onto Arduino?

bdureau commented 4 years ago

Yes, you need first to install the stm32 arduino board so that you can compile it. you might be able to use other Arduino board but you might have to modify the code. So first let me know which board you are using.

neilferreri commented 4 years ago

@bdureau Do you have a link to the BMP085_stm32.h source? I couldn't compile with the adafruit library either. Thanks!

bdureau commented 4 years ago

Yes you can find it here

https://github.com/bdureau/AltimetersLibs

�

From: neilferreri [mailto:notifications@github.com] Sent: Tuesday, October 13, 2020 7:38 PM To: bdureau/RocketMotorPIDGimbal Cc: Bear altimeters; Comment Subject: Re: [bdureau/RocketMotorPIDGimbal] Problem with installing the libraries. (#1)

�

Do you have a link to the BMP085_stm32.h source? I couldn't compile with the adafruit library either. Thanks!

— You are receiving this because you commented. Reply to this email directly, view https://github.com/bdureau/RocketMotorPIDGimbal/issues/1#issuecomment-707901026 it on GitHub, or unsubscribe https://github.com/notifications/unsubscribe-auth/AATGSH2DHAFJZ637ZA3PIW3SKSF6XANCNFSM4KMHGRFA . https://github.com/notifications/beacon/AATGSH4NX2LUCFSCJO64YZLSKSF6XA5CNFSM4KMHGRFKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOFIY3MYQ.gif