beademingstoestel OpenSource_ventilator_lungs issues

beademingstoestel / OpenSource_ventilator_lungs

Frontend for the beademingstoestel project

GNU General Public License v3.0

3 stars 7 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Bump bl from 2.2.0 to 2.2.1 in /httpServer

#82 dependabot[bot] opened 4 years ago
0
USB disconnect/reconnect no longer works

#81 lievenstandaert2 opened 4 years ago
1
Bump elliptic from 6.5.2 to 6.5.3 in /httpServer/uiWardOverview

#80 dependabot[bot] closed 3 years ago
1
Bump elliptic from 6.5.2 to 6.5.3 in /httpServer/ui

#79 dependabot[bot] closed 3 years ago
1
Bump lodash from 4.17.15 to 4.17.19 in /httpServer/uiWardOverview

#78 dependabot[bot] closed 3 years ago
1
Bump lodash from 4.17.15 to 4.17.19 in /httpServer

#77 dependabot[bot] closed 3 years ago
1
Bump lodash from 4.17.15 to 4.17.19 in /httpServer/ui

#76 dependabot[bot] closed 3 years ago
1
Disconnecting /crashing arduino not handled correctly

#75 lievenstandaert2 opened 4 years ago
0
PEEP should be adjusteable per +-1, not +-5

#74 lievenstandaert2 opened 4 years ago
0
After running a while 'Stop' does not stop the machine, or machine stops 30+ seconds after hitting that button

#73 lievenstandaert2 opened 4 years ago
0
PC sides also needs auditive alarm

#72 lievenstandaert2 opened 4 years ago
0
Machine is running, but GUI shows 'Start' and Daemon says status = 1

#71 lievenstandaert2 opened 4 years ago
1
'Reisdential Volume not zero' alarm shows up while graphs look ok

#70 lievenstandaert2 opened 4 years ago
0
Default start values are incorrect with MHRA

#69 lievenstandaert2 opened 4 years ago
0
onboard BME initialisation fails when no power is connected

#68 lievenstandaert2 opened 4 years ago
0
Oxygen sensors fail when resetting the machine

#67 lievenstandaert2 opened 4 years ago
0
"Oxygen supply failed " alarm is shown when 'no O2' option was selected

#66 lievenstandaert2 opened 4 years ago
0
When getting " Error during initialization" error, I can reset the machine, but cannot get out of that window.

#65 lievenstandaert2 opened 4 years ago
0
Disconnection of oxygen flow sensor is not detected as alarm

#64 lievenstandaert2 closed 4 years ago
2
Sensor disconnection no longer working correctly

#63 lievenstandaert2 closed 4 years ago
2
Oxygen valve does not switch back on after going down to 20%

#62 lievenstandaert2 opened 4 years ago
1
Trying to 'calibrate' without plugging in the machine just tries...

#61 lievenstandaert2 closed 4 years ago
2
Feature/manage side bar

#60 TomBruyneel closed 4 years ago
0
Issue 51 no pressure alarm when using long ramp time

#59 TomBruyneel closed 4 years ago
0
issue-51

#58 TomBruyneel closed 4 years ago
0
Not all values update always when changing multiple settings at once

#57 ThomasVDD opened 4 years ago
0
Residual volume not zero, keeps triggering

#56 lievenstandaert2 opened 4 years ago
0
keep ramp value lower than Tinhale

#55 TomBruyneel closed 4 years ago
0
Add settings for low RR and residual volume limit

#54 TomBruyneel closed 4 years ago
0
PEEP value needs to be adjustable per 1

#53 lievenstandaert2 closed 4 years ago
1
When setting long T inhale, this is not implemented correctly

#52 lievenstandaert2 opened 4 years ago
0
No pressure alarm when using long Ramp time

#51 lievenstandaert2 closed 4 years ago
1
RR and remaining volume alarms show up in aggressive settings

#50 lievenstandaert2 closed 4 years ago
0
No startup? Need to know why or how to correct

#49 lievenstandaert2 closed 4 years ago
1
Feature/new gui navigation

#48 TomBruyneel closed 4 years ago
0
Incompatible IE and inhalation time at start-up

#47 BranimirMrak closed 4 years ago
0
BAD CALIBRATION should not allow ventilator to star (Tom)

#46 BranimirMrak opened 4 years ago
0
Add GPL license

#45 TomBruyneel closed 4 years ago
0
Implementation of thresholds on SingleValueDisplaySettings (issue 42)

#44 ftsolakidis closed 4 years ago
0
Issue 41 stopping the machine should ask for confirmation

#43 TomBruyneel closed 4 years ago
0
Validate the settings after input

#42 TomBruyneel closed 4 years ago
1
Stopping the machine should ask for confirmation

#41 TomBruyneel closed 4 years ago
0
Bump next from 9.3.1 to 9.3.2 in /httpServer/uiWardOverview

#40 dependabot[bot] closed 4 years ago
1
Bump next from 9.3.1 to 9.3.2 in /httpServer/ui

#39 dependabot[bot] closed 4 years ago
1
proposed setup for uiWard

#38 thomasmattheussen closed 4 years ago
0
Feature/responsiveness refactoring

#37 thomasmattheussen closed 4 years ago
0
Feature/edit settings with gui

#36 TomBruyneel closed 4 years ago
0
tofixed error fix

#35 TomBruyneel closed 4 years ago
0
Update single value display to allow other values.

#34 thvdveld closed 4 years ago
0
Move PythonDaemon to separate repository

#33 frankvanbever closed 4 years ago
0

Previous Next