search

beagleboard / Latest-Images

Please use; https://git.beagleboard.org/beagleboard/Latest-Images
https://git.beagleboard.org/beagleboard/Latest-Images
MIT License
10 stars 11 forks source link

Disabling AP mode looses USB network connectivity #17

Closed JoseGoncalves closed 4 years ago

JoseGoncalves commented 4 years ago

Describe the bug If I disable the Wi-Fi AP mode service and afterwards I reboot my board, the virtual network interfaces on the USB connection are not properly setup (no IP addresses are set) and I'm unable to connect to the board via SSH.

Describe which image you are running bone-debian-10.3-console-armhf-2020-03-19-1gb.img.xz

Describe your hardware BeagleBone Green Wireless

Describe any Capes Installed None

To Reproduce Steps to reproduce the behavior:

  1. $ sudo systemctl disable bb-wl18xx-wlan0.service
  2. $ sudo reboot
  3. The board startups without USB network interfaces properly setup on the development PC

Expected behavior The board should boot up with the USB network interfaces properly setup.

JoseGoncalves commented 4 years ago

I've mounted the microSD card in a PC after the failed boot, to check the syslog contents. Here it goes (only the part regarding the boot after the AP service is disabled):

Feb 14 10:12:04 beaglebone systemd-fsck[831]: rootfs: clean, 18885/57344 files, 108612/229376 blocks
Feb 14 10:12:04 beaglebone systemd[1]: Starting Flush Journal to Persistent Storage...
Feb 14 10:12:04 beaglebone systemd[1]: Started Create Static Device Nodes in /dev.
Feb 14 10:12:04 beaglebone systemd[1]: Starting udev Kernel Device Manager...
Feb 14 10:12:04 beaglebone systemd[1]: Reached target Local File Systems (Pre).
Feb 14 10:12:04 beaglebone systemd[1]: Reached target Local File Systems.
Feb 14 10:12:04 beaglebone systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Feb 14 10:12:04 beaglebone systemd-udevd[850]: Network interface NamePolicy= disabled on kernel command line, ignoring.
Feb 14 10:12:04 beaglebone systemd[1]: Started Flush Journal to Persistent Storage.
Feb 14 10:12:04 beaglebone systemd[1]: Starting Create Volatile Files and Directories...
Feb 14 10:12:04 beaglebone systemd[1]: Started udev Kernel Device Manager.
Feb 14 10:12:04 beaglebone systemd[1]: Started Create Volatile Files and Directories.
Feb 14 10:12:04 beaglebone systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Feb 14 10:12:04 beaglebone systemd[1]: Started Entropy daemon using the HAVEGE algorithm.
Feb 14 10:12:04 beaglebone systemd[1]: Starting Network Time Synchronization...
Feb 14 10:12:04 beaglebone systemd[1]: Started Update UTMP about System Boot/Shutdown.
Feb 14 10:12:04 beaglebone systemd[1]: Started udev Coldplug all Devices.
Feb 14 10:12:04 beaglebone systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Feb 14 10:12:04 beaglebone systemd[1]: Started Helper to synchronize boot up for ifupdown.
Feb 14 10:12:04 beaglebone systemd[1]: Starting Raise network interfaces...
Feb 14 10:12:04 beaglebone systemd[1]: Started Network Time Synchronization.
Feb 14 10:12:04 beaglebone systemd[1]: Reached target System Initialization.
Feb 14 10:12:04 beaglebone systemd[1]: Listening on D-Bus System Message Bus Socket.
Feb 14 10:12:04 beaglebone systemd[1]: Reached target Sockets.
Feb 14 10:12:04 beaglebone systemd[1]: Reached target Basic System.
Feb 14 10:12:04 beaglebone systemd[1]: Starting LSB: Load kernel modules needed to enable cpufreq scaling...
Feb 14 10:12:04 beaglebone systemd[1]: Started D-Bus System Message Bus.
Feb 14 10:12:04 beaglebone systemd[1]: Starting Connection service...
Feb 14 10:12:04 beaglebone systemd[1]: Starting System Logging Service...
Feb 14 10:12:04 beaglebone systemd[1]: Started Daily Cleanup of Temporary Directories.
Feb 14 10:12:04 beaglebone systemd[1]: Starting Login Service...
Feb 14 10:12:04 beaglebone systemd[1]: Started Regular background program processing daemon.
Feb 14 10:12:04 beaglebone systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Feb 14 10:12:04 beaglebone systemd[1]: Starting WPA supplicant...
Feb 14 10:12:04 beaglebone systemd[1]: Reached target System Time Synchronized.
Feb 14 10:12:04 beaglebone kernel: [    0.000000] Booting Linux on physical CPU 0x0
Feb 14 10:12:04 beaglebone kernel: [    0.000000] Linux version 4.19.94-ti-r39 (voodoo@w8-imx6q-wandboard-2gb) (gcc version 8.3.0 (Debian 8.3.0-6)) #1buster SMP PREEMPT Wed Mar 18 21:31:04 UTC 2020
Feb 14 10:12:04 beaglebone kernel: [    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
Feb 14 10:12:04 beaglebone kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Feb 14 10:12:04 beaglebone kernel: [    0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Green Wireless
Feb 14 10:12:04 beaglebone kernel: [    0.000000] Memory policy: Data cache writeback
Feb 14 10:12:04 beaglebone kernel: [    0.000000] cma: Reserved 48 MiB at 0x9c800000
Feb 14 10:12:04 beaglebone kernel: [    0.000000] On node 0 totalpages: 130560
Feb 14 10:12:04 beaglebone kernel: [    0.000000]   Normal zone: 1148 pages used for memmap
Feb 14 10:12:04 beaglebone kernel: [    0.000000]   Normal zone: 0 pages reserved
Feb 14 10:12:04 beaglebone kernel: [    0.000000]   Normal zone: 130560 pages, LIFO batch:31
Feb 14 10:12:04 beaglebone kernel: [    0.000000] CPU: All CPU(s) started in SVC mode.
Feb 14 10:12:04 beaglebone kernel: [    0.000000] AM335X ES2.1 (sgx neon)
Feb 14 10:12:04 beaglebone kernel: [    0.000000] random: get_random_bytes called from start_kernel+0xac/0x4b4 with crng_init=0
Feb 14 10:12:04 beaglebone kernel: [    0.000000] percpu: Embedded 17 pages/cpu s38988 r8192 d22452 u69632
Feb 14 10:12:04 beaglebone kernel: [    0.000000] pcpu-alloc: s38988 r8192 d22452 u69632 alloc=17*4096
Feb 14 10:12:04 beaglebone kernel: [    0.000000] pcpu-alloc: [0] 0 
Feb 14 10:12:04 beaglebone kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129412
Feb 14 10:12:04 beaglebone kernel: [    0.000000] Kernel command line: console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet
Feb 14 10:12:04 beaglebone kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Feb 14 10:12:04 beaglebone kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Feb 14 10:12:04 beaglebone kernel: [    0.000000] Memory: 438432K/522240K available (13312K kernel code, 1140K rwdata, 4340K rodata, 1024K init, 350K bss, 34656K reserved, 49152K cma-reserved, 0K highmem)
Feb 14 10:12:04 beaglebone kernel: [    0.000000] Virtual kernel memory layout:
Feb 14 10:12:04 beaglebone kernel: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Feb 14 10:12:04 beaglebone kernel: [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
Feb 14 10:12:04 beaglebone kernel: [    0.000000]     vmalloc : 0xe0000000 - 0xff800000   ( 504 MB)
Feb 14 10:12:04 beaglebone kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xdfe00000   ( 510 MB)
Feb 14 10:12:04 beaglebone kernel: [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
Feb 14 10:12:04 beaglebone kernel: [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
Feb 14 10:12:04 beaglebone kernel: [    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (14304 kB)
Feb 14 10:12:04 beaglebone kernel: [    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
Feb 14 10:12:04 beaglebone kernel: [    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   (1141 kB)
Feb 14 10:12:04 beaglebone kernel: [    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 351 kB)
Feb 14 10:12:04 beaglebone kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Feb 14 10:12:04 beaglebone kernel: [    0.000000] ftrace: allocating 42221 entries in 124 pages
Feb 14 10:12:04 beaglebone kernel: [    0.000000] rcu: Preemptible hierarchical RCU implementation.
Feb 14 10:12:04 beaglebone kernel: [    0.000000] rcu:  RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
Feb 14 10:12:04 beaglebone kernel: [    0.000000]   Tasks RCU enabled.
Feb 14 10:12:04 beaglebone kernel: [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
Feb 14 10:12:04 beaglebone kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Feb 14 10:12:04 beaglebone kernel: [    0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts
Feb 14 10:12:04 beaglebone kernel: [    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
Feb 14 10:12:04 beaglebone kernel: [    0.000023] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
Feb 14 10:12:04 beaglebone kernel: [    0.000042] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Feb 14 10:12:04 beaglebone kernel: [    0.000053] OMAP clocksource: timer1 at 24000000 Hz
Feb 14 10:12:04 beaglebone kernel: [    0.002016] timer_probe: no matching timers found
Feb 14 10:12:04 beaglebone kernel: [    0.002364] Console: colour dummy device 80x30
Feb 14 10:12:04 beaglebone kernel: [    0.002395] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
Feb 14 10:12:04 beaglebone kernel: [    0.002400] This ensures that you still see kernel messages. Please
Feb 14 10:12:04 beaglebone kernel: [    0.002404] update your kernel commandline.
Feb 14 10:12:04 beaglebone kernel: [    0.002464] Calibrating delay loop (skipped) preset value.. 995.32 BogoMIPS (lpj=1990656)
Feb 14 10:12:04 beaglebone kernel: [    0.002483] pid_max: default: 32768 minimum: 301
Feb 14 10:12:04 beaglebone kernel: [    0.002772] Security Framework initialized
Feb 14 10:12:04 beaglebone kernel: [    0.002788] Yama: becoming mindful.
Feb 14 10:12:04 beaglebone kernel: [    0.002935] AppArmor: AppArmor initialized
Feb 14 10:12:04 beaglebone kernel: [    0.003040] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Feb 14 10:12:04 beaglebone kernel: [    0.003053] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Feb 14 10:12:04 beaglebone kernel: [    0.004153] CPU: Testing write buffer coherency: ok
Feb 14 10:12:04 beaglebone kernel: [    0.004217] CPU0: Spectre v2: using BPIALL workaround
Feb 14 10:12:04 beaglebone kernel: [    0.004712] CPU0: thread -1, cpu 0, socket -1, mpidr 0
Feb 14 10:12:04 beaglebone kernel: [    0.025275] Setting up static identity map for 0x80100000 - 0x80100060
Feb 14 10:12:04 beaglebone kernel: [    0.033185] rcu: Hierarchical SRCU implementation.
Feb 14 10:12:04 beaglebone kernel: [    0.049196] smp: Bringing up secondary CPUs ...
Feb 14 10:12:04 beaglebone kernel: [    0.049214] smp: Brought up 1 node, 1 CPU
Feb 14 10:12:04 beaglebone kernel: [    0.049226] SMP: Total of 1 processors activated (995.32 BogoMIPS).
Feb 14 10:12:04 beaglebone kernel: [    0.049233] CPU: All CPU(s) started in SVC mode.
Feb 14 10:12:04 beaglebone kernel: [    0.050952] devtmpfs: initialized
Feb 14 10:12:04 beaglebone kernel: [    0.085556] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
Feb 14 10:12:04 beaglebone kernel: [    0.086170] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Feb 14 10:12:04 beaglebone kernel: [    0.086197] futex hash table entries: 256 (order: 2, 16384 bytes)
Feb 14 10:12:04 beaglebone kernel: [    0.090143] xor: measuring software checksum speed
Feb 14 10:12:04 beaglebone kernel: [    0.129168]    arm4regs  :  1217.000 MB/sec
Feb 14 10:12:04 beaglebone kernel: [    0.169156]    8regs     :  1091.000 MB/sec
Feb 14 10:12:04 beaglebone kernel: [    0.209155]    32regs    :  1088.000 MB/sec
Feb 14 10:12:04 beaglebone kernel: [    0.249154]    neon      :  1673.000 MB/sec
Feb 14 10:12:04 beaglebone kernel: [    0.249161] xor: using function: neon (1673.000 MB/sec)
Feb 14 10:12:04 beaglebone kernel: [    0.249178] pinctrl core: initialized pinctrl subsystem
Feb 14 10:12:04 beaglebone kernel: [    0.250558] NET: Registered protocol family 16
Feb 14 10:12:04 beaglebone kernel: [    0.256723] DMA: preallocated 1024 KiB pool for atomic coherent allocations
Feb 14 10:12:04 beaglebone kernel: [    0.350052] l4_wkup_cm:clk:0010:0: failed to disable
Feb 14 10:12:04 beaglebone kernel: [    0.390310] audit: initializing netlink subsys (disabled)
Feb 14 10:12:04 beaglebone kernel: [    0.397276] audit: type=2000 audit(0.384:1): state=initialized audit_enabled=0 res=1
Feb 14 10:12:04 beaglebone kernel: [    0.399462] OMAP GPIO hardware version 0.1
Feb 14 10:12:04 beaglebone kernel: [    0.400293] GPIO line 61 (LS_BUF_EN) hogged as output/high
Feb 14 10:12:04 beaglebone kernel: [    0.402616] GPIO line 112 (MCASP0_AHCLKR) hogged as output/low
Feb 14 10:12:04 beaglebone kernel: [    0.424288] hw-breakpoint: debug architecture 0x4 unsupported.
Feb 14 10:12:04 beaglebone kernel: [    0.453328] raid6: using algorithm neonx8 gen() 0 MB/s
Feb 14 10:12:04 beaglebone kernel: [    0.453341] raid6: .... xor() 0 MB/s, rmw enabled
Feb 14 10:12:04 beaglebone kernel: [    0.453348] raid6: using neon recovery algorithm
Feb 14 10:12:04 beaglebone kernel: [    0.461522] edma 49000000.edma: TI EDMA DMA engine driver
Feb 14 10:12:04 beaglebone kernel: [    0.468928] SCSI subsystem initialized
Feb 14 10:12:04 beaglebone kernel: [    0.473301] libata version 3.00 loaded.
Feb 14 10:12:04 beaglebone kernel: [    0.473615] usbcore: registered new interface driver usbfs
Feb 14 10:12:04 beaglebone kernel: [    0.473674] usbcore: registered new interface driver hub
Feb 14 10:12:04 beaglebone kernel: [    0.473788] usbcore: registered new device driver usb
Feb 14 10:12:04 beaglebone kernel: [    0.475854] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
Feb 14 10:12:04 beaglebone kernel: [    0.477430] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
Feb 14 10:12:04 beaglebone kernel: [    0.478045] pps_core: LinuxPPS API ver. 1 registered
Feb 14 10:12:04 beaglebone kernel: [    0.478055] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Feb 14 10:12:04 beaglebone kernel: [    0.478080] PTP clock support registered
Feb 14 10:12:04 beaglebone kernel: [    0.478668] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
Feb 14 10:12:04 beaglebone kernel: [    0.481568] Advanced Linux Sound Architecture Driver Initialized.
Feb 14 10:12:04 beaglebone kernel: [    0.482374] NetLabel: Initializing
Feb 14 10:12:04 beaglebone kernel: [    0.482386] NetLabel:  domain hash size = 128
Feb 14 10:12:04 beaglebone kernel: [    0.482391] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
Feb 14 10:12:04 beaglebone kernel: [    0.482480] NetLabel:  unlabeled traffic allowed by default
Feb 14 10:12:04 beaglebone kernel: [    0.483603] clocksource: Switched to clocksource timer1
Feb 14 10:12:04 beaglebone kernel: [    0.646171] VFS: Disk quotas dquot_6.6.0
Feb 14 10:12:04 beaglebone kernel: [    0.646276] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Feb 14 10:12:04 beaglebone kernel: [    0.647146] AppArmor: AppArmor Filesystem Enabled
Feb 14 10:12:04 beaglebone kernel: [    0.660186] NET: Registered protocol family 2
Feb 14 10:12:04 beaglebone kernel: [    0.661215] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
Feb 14 10:12:04 beaglebone kernel: [    0.661249] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Feb 14 10:12:04 beaglebone kernel: [    0.661291] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Feb 14 10:12:04 beaglebone kernel: [    0.661349] TCP: Hash tables configured (established 4096 bind 4096)
Feb 14 10:12:04 beaglebone kernel: [    0.661481] UDP hash table entries: 256 (order: 1, 8192 bytes)
Feb 14 10:12:04 beaglebone kernel: [    0.661505] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Feb 14 10:12:04 beaglebone kernel: [    0.661848] NET: Registered protocol family 1
Feb 14 10:12:04 beaglebone systemd[1]: Started Daily rotation of log files.
Feb 14 10:12:04 beaglebone cron[889]: (CRON) INFO (pidfile fd = 3)
Feb 14 10:12:04 beaglebone rsyslogd: imuxsock: Acquired UNIX socket '/run/systemd/journal/syslog' (fd 3) from systemd.  [v8.1901.0]
Feb 14 10:12:04 beaglebone systemd[1]: Reached target Timers.
Feb 14 10:12:04 beaglebone rsyslogd:  [origin software="rsyslogd" swVersion="8.1901.0" x-pid="884" x-info="https://www.rsyslog.com"] start
Feb 14 10:12:04 beaglebone kernel: [    0.675033] RPC: Registered named UNIX socket transport module.
Feb 14 10:12:04 beaglebone kernel: [    0.675044] RPC: Registered udp transport module.
Feb 14 10:12:04 beaglebone kernel: [    0.675049] RPC: Registered tcp transport module.
Feb 14 10:12:04 beaglebone kernel: [    0.675054] RPC: Registered tcp NFSv4.1 backchannel transport module.
Feb 14 10:12:04 beaglebone kernel: [    0.675975] Unpacking initramfs...
Feb 14 10:12:04 beaglebone kernel: [    1.015667] random: fast init done
Feb 14 10:12:04 beaglebone kernel: [    1.042950] Freeing initrd memory: 6432K
Feb 14 10:12:04 beaglebone kernel: [    1.043874] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
Feb 14 10:12:04 beaglebone kernel: [    1.047033] Initialise system trusted keyrings
Feb 14 10:12:04 beaglebone kernel: [    1.047437] workingset: timestamp_bits=14 max_order=17 bucket_order=3
Feb 14 10:12:04 beaglebone kernel: [    1.054687] zbud: loaded
Feb 14 10:12:04 beaglebone kernel: [    1.062139] NFS: Registering the id_resolver key type
Feb 14 10:12:04 beaglebone kernel: [    1.062187] Key type id_resolver registered
Feb 14 10:12:04 beaglebone kernel: [    1.062193] Key type id_legacy registered
Feb 14 10:12:04 beaglebone kernel: [    1.062211] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Feb 14 10:12:04 beaglebone kernel: [    1.062579] fuse init (API version 7.27)
Feb 14 10:12:04 beaglebone kernel: [    1.073156] Key type asymmetric registered
Feb 14 10:12:04 beaglebone kernel: [    1.073172] Asymmetric key parser 'x509' registered
Feb 14 10:12:04 beaglebone kernel: [    1.073286] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
Feb 14 10:12:04 beaglebone kernel: [    1.077642] io scheduler noop registered
Feb 14 10:12:04 beaglebone kernel: [    1.077653] io scheduler deadline registered
Feb 14 10:12:04 beaglebone kernel: [    1.077960] io scheduler cfq registered (default)
Feb 14 10:12:04 beaglebone kernel: [    1.077971] io scheduler mq-deadline registered
Feb 14 10:12:04 beaglebone kernel: [    1.082262] pinctrl-single 44e10800.pinmux: 142 pins, size 568
Feb 14 10:12:04 beaglebone kernel: [    1.094827] gpio-of-helper ocp:cape-universal: ready
Feb 14 10:12:04 beaglebone kernel: [    1.106703] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
Feb 14 10:12:04 beaglebone kernel: [    1.115338] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
Feb 14 10:12:04 beaglebone kernel: [    1.119046] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250
Feb 14 10:12:04 beaglebone kernel: [    1.135982] console [ttyS0] enabled
Feb 14 10:12:04 beaglebone kernel: [    1.137133] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 31, base_baud = 3000000) is a 8250
Feb 14 10:12:04 beaglebone kernel: [    1.138122] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 32, base_baud = 3000000) is a 8250
Feb 14 10:12:04 beaglebone kernel: [    1.139227] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 33, base_baud = 3000000) is a 8250
Feb 14 10:12:04 beaglebone kernel: [    1.140388] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 34, base_baud = 3000000) is a 8250
Feb 14 10:12:04 beaglebone kernel: [    1.141385] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 35, base_baud = 3000000) is a 8250
Feb 14 10:12:04 beaglebone kernel: [    1.145190] omap_rng 48310000.rng: Random Number Generator ver. 20
Feb 14 10:12:04 beaglebone kernel: [    1.146304] sdhci: Secure Digital Host Controller Interface driver
Feb 14 10:12:04 beaglebone kernel: [    1.146312] sdhci: Copyright(c) Pierre Ossman
Feb 14 10:12:04 beaglebone kernel: [    1.146836] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)
Feb 14 10:12:04 beaglebone kernel: [    1.146847] omap_hsmmc 48060000.mmc: Got CD GPIO
Feb 14 10:12:04 beaglebone kernel: [    1.147468] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.2
Feb 14 10:12:04 beaglebone kernel: [    1.148427] random: crng init done
Feb 14 10:12:04 beaglebone kernel: [    1.175135] omap_hsmmc 481d8000.mmc: Linked as a consumer to regulator.2
Feb 14 10:12:04 beaglebone kernel: [    1.200573] omap_hsmmc 47810000.mmc: Linked as a consumer to regulator.1
Feb 14 10:12:04 beaglebone kernel: [    1.208214] mmc0: host does not support reading read-only switch, assuming write-enable
Feb 14 10:12:04 beaglebone kernel: [    1.210101] mmc0: new high speed SDHC card at address 5048
Feb 14 10:12:04 beaglebone kernel: [    1.215455] mmcblk0: mmc0:5048 SD16G 14.4 GiB 
Feb 14 10:12:04 beaglebone kernel: [    1.221974]  mmcblk0: p1
Feb 14 10:12:04 beaglebone kernel: [    1.244439] mmc1: new high speed MMC card at address 0001
Feb 14 10:12:04 beaglebone kernel: [    1.249820] mmcblk1: mmc1:0001 M62704 3.53 GiB 
Feb 14 10:12:04 beaglebone kernel: [    1.250438] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
Feb 14 10:12:04 beaglebone kernel: [    1.251034] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
Feb 14 10:12:04 beaglebone kernel: [    1.251368] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (244:0)
Feb 14 10:12:04 beaglebone kernel: [    1.253007]  mmcblk1: p1
Feb 14 10:12:04 beaglebone kernel: [    1.305604] sdhci-pltfm: SDHCI platform and OF driver helper
Feb 14 10:12:04 beaglebone kernel: [    1.318198] omap_hsmmc 47810000.mmc: card claims to support voltages below defined range
Feb 14 10:12:04 beaglebone kernel: [    1.330637] mmc2: new high speed SDIO card at address 0001
Feb 14 10:12:04 beaglebone kernel: [    1.430894] eqep 48300180.eqep: ver. 1.0
Feb 14 10:12:04 beaglebone kernel: [    1.431129] eqep 48300180.eqep: count_mode:0
Feb 14 10:12:04 beaglebone kernel: [    1.431140] eqep 48300180.eqep: invert_qa:1
Feb 14 10:12:04 beaglebone kernel: [    1.431149] eqep 48300180.eqep: invert_qb:1
Feb 14 10:12:04 beaglebone kernel: [    1.431157] eqep 48300180.eqep: invert_qi:0
Feb 14 10:12:04 beaglebone kernel: [    1.431166] eqep 48300180.eqep: invert_qs:0
Feb 14 10:12:04 beaglebone kernel: [    1.431174] eqep 48300180.eqep: swap_inputs:0
Feb 14 10:12:04 beaglebone kernel: [    1.431184] eqep 48300180.eqep: QDECCTL:0x0180
Feb 14 10:12:04 beaglebone kernel: [    1.431192] eqep 48300180.eqep: QPOSINIT:0x00000000
Feb 14 10:12:04 beaglebone kernel: [    1.431200] eqep 48300180.eqep: QPOSMAX:0xffffffff
Feb 14 10:12:04 beaglebone kernel: [    1.431206] eqep 48300180.eqep: QPOSCNT:0x00000000
Feb 14 10:12:04 beaglebone kernel: [    1.431215] eqep 48300180.eqep: omit_interrupt:0
Feb 14 10:12:04 beaglebone kernel: [    1.431222] eqep 48300180.eqep: QEINT:0x0800
Feb 14 10:12:04 beaglebone kernel: [    1.431230] eqep 48300180.eqep: QUPRD:0x05f5e100
Feb 14 10:12:04 beaglebone kernel: [    1.431237] eqep 48300180.eqep: QEPCTL:0x009e write
Feb 14 10:12:04 beaglebone kernel: [    1.431244] eqep 48300180.eqep: QEPCTL:0x009e read
Feb 14 10:12:04 beaglebone kernel: [    1.431270] eqep 48300180.eqep: irq:128, clk_rate:100000000
Feb 14 10:12:04 beaglebone kernel: [    1.431570] eqep 48302180.eqep: ver. 1.0
Feb 14 10:12:04 beaglebone kernel: [    1.431908] eqep 48302180.eqep: count_mode:0
Feb 14 10:12:04 beaglebone kernel: [    1.431918] eqep 48302180.eqep: invert_qa:1
Feb 14 10:12:04 beaglebone kernel: [    1.431926] eqep 48302180.eqep: invert_qb:1
Feb 14 10:12:04 beaglebone kernel: [    1.431934] eqep 48302180.eqep: invert_qi:0
Feb 14 10:12:04 beaglebone kernel: [    1.431942] eqep 48302180.eqep: invert_qs:0
Feb 14 10:12:04 beaglebone kernel: [    1.431950] eqep 48302180.eqep: swap_inputs:0
Feb 14 10:12:04 beaglebone kernel: [    1.431958] eqep 48302180.eqep: QDECCTL:0x0180
Feb 14 10:12:04 beaglebone kernel: [    1.431966] eqep 48302180.eqep: QPOSINIT:0x00000000
Feb 14 10:12:04 beaglebone kernel: [    1.431974] eqep 48302180.eqep: QPOSMAX:0xffffffff
Feb 14 10:12:04 beaglebone kernel: [    1.431981] eqep 48302180.eqep: QPOSCNT:0x00000000
Feb 14 10:12:04 beaglebone kernel: [    1.431989] eqep 48302180.eqep: omit_interrupt:0
Feb 14 10:12:04 beaglebone kernel: [    1.431996] eqep 48302180.eqep: QEINT:0x0800
Feb 14 10:12:04 beaglebone kernel: [    1.432003] eqep 48302180.eqep: QUPRD:0x05f5e100
Feb 14 10:12:04 beaglebone kernel: [    1.432010] eqep 48302180.eqep: QEPCTL:0x009e write
Feb 14 10:12:04 beaglebone kernel: [    1.432017] eqep 48302180.eqep: QEPCTL:0x009e read
Feb 14 10:12:04 beaglebone kernel: [    1.432040] eqep 48302180.eqep: irq:130, clk_rate:100000000
Feb 14 10:12:04 beaglebone kernel: [    1.432274] eqep 48304180.eqep: ver. 1.0
Feb 14 10:12:04 beaglebone kernel: [    1.432404] eqep 48304180.eqep: count_mode:0
Feb 14 10:12:04 beaglebone kernel: [    1.432414] eqep 48304180.eqep: invert_qa:1
Feb 14 10:12:04 beaglebone kernel: [    1.432422] eqep 48304180.eqep: invert_qb:1
Feb 14 10:12:04 beaglebone kernel: [    1.432430] eqep 48304180.eqep: invert_qi:0
Feb 14 10:12:04 beaglebone kernel: [    1.432438] eqep 48304180.eqep: invert_qs:0
Feb 14 10:12:04 beaglebone kernel: [    1.432446] eqep 48304180.eqep: swap_inputs:0
Feb 14 10:12:04 beaglebone kernel: [    1.432454] eqep 48304180.eqep: QDECCTL:0x0180
Feb 14 10:12:04 beaglebone kernel: [    1.432462] eqep 48304180.eqep: QPOSINIT:0x00000000
Feb 14 10:12:04 beaglebone kernel: [    1.432469] eqep 48304180.eqep: QPOSMAX:0xffffffff
Feb 14 10:12:04 beaglebone kernel: [    1.432476] eqep 48304180.eqep: QPOSCNT:0x00000000
Feb 14 10:12:04 beaglebone kernel: [    1.432484] eqep 48304180.eqep: omit_interrupt:0
Feb 14 10:12:04 beaglebone kernel: [    1.432491] eqep 48304180.eqep: QEINT:0x0800
Feb 14 10:12:04 beaglebone kernel: [    1.432498] eqep 48304180.eqep: QUPRD:0x05f5e100
Feb 14 10:12:04 beaglebone kernel: [    1.432506] eqep 48304180.eqep: QEPCTL:0x009e write
Feb 14 10:12:04 beaglebone kernel: [    1.432513] eqep 48304180.eqep: QEPCTL:0x009e read
Feb 14 10:12:04 beaglebone kernel: [    1.432532] eqep 48304180.eqep: irq:132, clk_rate:100000000
Feb 14 10:12:04 beaglebone kernel: [    1.504582] libphy: Fixed MDIO Bus: probed
Feb 14 10:12:04 beaglebone kernel: [    1.505527] CAN device driver interface
Feb 14 10:12:04 beaglebone kernel: [    1.507048] c_can_platform 481cc000.can: c_can_platform device registered (regs=e4b05984, irq=43)
Feb 14 10:12:04 beaglebone kernel: [    1.508407] c_can_platform 481d0000.can: c_can_platform device registered (regs=a5014854, irq=44)
Feb 14 10:12:04 beaglebone kernel: [    1.510571] usbcore: registered new interface driver smsc95xx
Feb 14 10:12:04 beaglebone kernel: [    1.512541] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Feb 14 10:12:04 beaglebone kernel: [    1.512608] ehci-platform: EHCI generic platform driver
Feb 14 10:12:04 beaglebone kernel: [    1.513031] ehci-omap: OMAP-EHCI Host Controller driver
Feb 14 10:12:04 beaglebone kernel: [    1.514108] usbcore: registered new interface driver usb-storage
Feb 14 10:12:04 beaglebone kernel: [    1.517767] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator
Feb 14 10:12:04 beaglebone kernel: [    1.517924] am335x-phy-driver 47401300.usb-phy: Linked as a consumer to regulator.0
Feb 14 10:12:04 beaglebone kernel: [    1.521548] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator
Feb 14 10:12:04 beaglebone kernel: [    1.521743] am335x-phy-driver 47401b00.usb-phy: Linked as a consumer to regulator.0
Feb 14 10:12:04 beaglebone cron[889]: (CRON) INFO (Running @reboot jobs)
Feb 14 10:12:04 beaglebone systemd[1]: Started System Logging Service.
Feb 14 10:12:04 beaglebone kernel: [    1.525342] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
Feb 14 10:12:04 beaglebone kernel: [    1.525384] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
Feb 14 10:12:04 beaglebone kernel: [    1.525752] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
Feb 14 10:12:04 beaglebone kernel: [    1.525763] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 14 10:12:04 beaglebone kernel: [    1.525771] usb usb1: Product: MUSB HDRC host driver
Feb 14 10:12:04 beaglebone kernel: [    1.525779] usb usb1: Manufacturer: Linux 4.19.94-ti-r39 musb-hcd
Feb 14 10:12:04 beaglebone kernel: [    1.525786] usb usb1: SerialNumber: musb-hdrc.1
Feb 14 10:12:04 beaglebone kernel: [    1.526618] hub 1-0:1.0: USB hub found
Feb 14 10:12:04 beaglebone kernel: [    1.526681] hub 1-0:1.0: 1 port detected
Feb 14 10:12:04 beaglebone kernel: [    1.539060] omap_rtc 44e3e000.rtc: already running
Feb 14 10:12:04 beaglebone kernel: [    1.539849] omap_rtc 44e3e000.rtc: registered as rtc0
Feb 14 10:12:04 beaglebone kernel: [    1.541625] i2c /dev entries driver
Feb 14 10:12:04 beaglebone kernel: [    1.546159] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
Feb 14 10:12:04 beaglebone kernel: [    1.546802] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
Feb 14 10:12:04 beaglebone kernel: [    1.551764] ledtrig-cpu: registered to indicate activity on CPUs
Feb 14 10:12:04 beaglebone kernel: [    1.552381] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
Feb 14 10:12:04 beaglebone kernel: [    1.552719] omap-aes 53500000.aes: will run requests pump with realtime priority
Feb 14 10:12:04 beaglebone kernel: [    1.555446] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
Feb 14 10:12:04 beaglebone kernel: [    1.559573] hidraw: raw HID events driver (C) Jiri Kosina
Feb 14 10:12:04 beaglebone kernel: [    1.561605] remoteproc remoteproc0: wkup_m3 is available
Feb 14 10:12:04 beaglebone kernel: [    1.563177] remoteproc remoteproc1: 4a334000.pru is available
Feb 14 10:12:04 beaglebone kernel: [    1.563295] pru-rproc 4a334000.pru: PRU rproc node pru@4a334000 probed successfully
Feb 14 10:12:04 beaglebone kernel: [    1.564101] remoteproc remoteproc2: 4a338000.pru is available
Feb 14 10:12:04 beaglebone kernel: [    1.564203] pru-rproc 4a338000.pru: PRU rproc node pru@4a338000 probed successfully
Feb 14 10:12:04 beaglebone kernel: [    1.569433] gnss: GNSS driver registered with major 240
Feb 14 10:12:04 beaglebone kernel: [    1.577171] NET: Registered protocol family 10
Feb 14 10:12:04 beaglebone kernel: [    1.648486] Segment Routing with IPv6
Feb 14 10:12:04 beaglebone kernel: [    1.648621] mip6: Mobile IPv6
Feb 14 10:12:04 beaglebone kernel: [    1.648777] NET: Registered protocol family 17
Feb 14 10:12:04 beaglebone kernel: [    1.648808] can: controller area network core (rev 20170425 abi 9)
Feb 14 10:12:04 beaglebone kernel: [    1.648899] NET: Registered protocol family 29
Feb 14 10:12:04 beaglebone kernel: [    1.648996] 8021q: 802.1Q VLAN Support v1.8
Feb 14 10:12:04 beaglebone kernel: [    1.649077] Key type dns_resolver registered
Feb 14 10:12:04 beaglebone kernel: [    1.649085] mpls_gso: MPLS GSO support
Feb 14 10:12:04 beaglebone kernel: [    1.649392] ThumbEE CPU extension supported.
Feb 14 10:12:04 beaglebone kernel: [    1.649406] Registering SWP/SWPB emulation handler
Feb 14 10:12:04 beaglebone kernel: [    1.649417] omap_voltage_late_init: Voltage driver support not added
Feb 14 10:12:04 beaglebone kernel: [    1.656803] PM: Cannot get wkup_m3_ipc handle
Feb 14 10:12:04 beaglebone kernel: [    1.662743] registered taskstats version 1
Feb 14 10:12:04 beaglebone kernel: [    1.662753] Loading compiled-in X.509 certificates
Feb 14 10:12:04 beaglebone kernel: [    1.662883] zswap: loaded using pool lzo/zbud
Feb 14 10:12:04 beaglebone kernel: [    1.666177] Btrfs loaded, crc32c=crc32c-generic
Feb 14 10:12:04 beaglebone kernel: [    1.666302] AppArmor: AppArmor sha1 policy hashing enabled
Feb 14 10:12:04 beaglebone kernel: [    1.721598] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set
Feb 14 10:12:04 beaglebone kernel: [    1.722446] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0
Feb 14 10:12:04 beaglebone kernel: [    1.723425] tps65217 0-0024: TPS65217 ID 0xe version 1.2
Feb 14 10:12:04 beaglebone kernel: [    1.724498] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Feb 14 10:12:04 beaglebone kernel: [    1.724616] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
Feb 14 10:12:04 beaglebone kernel: [    1.726510] remoteproc remoteproc0: powering up wkup_m3
Feb 14 10:12:04 beaglebone kernel: [    1.726640] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168
Feb 14 10:12:04 beaglebone kernel: [    1.730454] remoteproc remoteproc0: remote processor wkup_m3 is now up
Feb 14 10:12:04 beaglebone kernel: [    1.730476] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x193
Feb 14 10:12:04 beaglebone kernel: [    1.730857] cpu cpu0: Linked as a consumer to regulator.4
Feb 14 10:12:04 beaglebone kernel: [    1.730966] cpu cpu0: Dropping the link to regulator.4
Feb 14 10:12:04 beaglebone kernel: [    1.731500] cpu cpu0: Linked as a consumer to regulator.4
Feb 14 10:12:04 beaglebone kernel: [    1.733810] PM: bootloader does not support rtc-only!
Feb 14 10:12:04 beaglebone kernel: [    1.735242] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:24:53 UTC (946686293)
Feb 14 10:12:04 beaglebone kernel: [    1.736940] ALSA device list:
Feb 14 10:12:04 beaglebone kernel: [    1.736954]   No soundcards found.
Feb 14 10:12:04 beaglebone kernel: [    1.743495] Freeing unused kernel memory: 1024K
Feb 14 10:12:04 beaglebone kernel: [    1.744369] Run /init as init process
Feb 14 10:12:04 beaglebone kernel: [    1.935781] usb 1-1: new high-speed USB device number 2 using musb-hdrc
Feb 14 10:12:04 beaglebone kernel: [    2.085370] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
Feb 14 10:12:04 beaglebone kernel: [    2.085388] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Feb 14 10:12:04 beaglebone kernel: [    2.085395] usb 1-1: Product: USB2.0 Hub
Feb 14 10:12:04 beaglebone kernel: [    2.086982] hub 1-1:1.0: USB hub found
Feb 14 10:12:04 beaglebone kernel: [    2.087373] hub 1-1:1.0: 4 ports detected
Feb 14 10:12:04 beaglebone kernel: [    9.089161] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
Feb 14 10:12:04 beaglebone kernel: [   12.466273] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
Feb 14 10:12:05 beaglebone systemd[1]: Started WPA supplicant.
Feb 14 10:12:05 beaglebone wpa_supplicant[892]: Successfully initialized wpa_supplicant
Feb 14 10:12:05 beaglebone systemd[1]: Started Connection service.
Feb 14 10:12:05 beaglebone connmand[882]: Connection Manager version 1.36
Feb 14 10:12:05 beaglebone systemd[1]: Started Login Service.
Feb 14 10:12:05 beaglebone systemd[1]: Started Raise network interfaces.
Feb 14 10:12:05 beaglebone systemd[1]: Reached target Network.
Feb 14 10:12:05 beaglebone systemd[1]: Starting OpenBSD Secure Shell server...
Feb 14 10:12:05 beaglebone systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Feb 14 10:12:05 beaglebone systemd[1]: Starting Permit User Sessions...
Feb 14 10:12:06 beaglebone systemd[1]: Starting Generic Board Startup...
Feb 14 10:12:06 beaglebone sh[930]: generic-board-startup: start
Feb 14 10:12:06 beaglebone sh[930]: generic-board-startup: ssh
Feb 14 10:12:06 beaglebone sh[930]: generic-board-startup: efi
Feb 14 10:12:06 beaglebone sh[930]: generic-board-startup: gpio
Feb 14 10:12:06 beaglebone systemd[1]: Started Permit User Sessions.
Feb 14 10:12:06 beaglebone sh[930]: generic-board-startup: leds
Feb 14 10:12:06 beaglebone connmand[882]: Checking loopback interface settings
Feb 14 10:12:06 beaglebone connmand[882]: System hostname is beaglebone
Feb 14 10:12:06 beaglebone systemd[1]: Started Getty on tty1.
Feb 14 10:12:06 beaglebone connmand[882]: lo {newlink} index 1 address 00:00:00:00:00:00 mtu 65536
Feb 14 10:12:06 beaglebone connmand[882]: lo {newlink} index 1 operstate 0 <UNKNOWN>
Feb 14 10:12:06 beaglebone connmand[882]: can0 {newlink} index 2 address 00:00:00:00:00:00 mtu 16
Feb 14 10:12:06 beaglebone connmand[882]: can0 {newlink} index 2 operstate 2 <DOWN>
Feb 14 10:12:06 beaglebone connmand[882]: can1 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Feb 14 10:12:07 beaglebone sh[930]: generic-board-startup: model
Feb 14 10:12:07 beaglebone connmand[882]: can1 {newlink} index 3 operstate 2 <DOWN>
Feb 14 10:12:07 beaglebone connmand[882]: The name net.connman.vpn was not provided by any .service files
Feb 14 10:12:07 beaglebone dbus-daemon[877]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.3' (uid=0 pid=882 comm="/usr/sbin/connmand -n --nodnsproxy ")
Feb 14 10:12:07 beaglebone sh[930]: generic-board-startup: [model=TI_AM335x_BeagleBone_Green_Wireless]
Feb 14 10:12:07 beaglebone sh[930]: generic-board-startup: [startup script=/opt/scripts/boot/am335x_evm.sh]
Feb 14 10:12:07 beaglebone loadcpufreq[876]: Loading cpufreq kernel modules...done (none).
Feb 14 10:12:07 beaglebone systemd[1]: Starting Hostname Service...
Feb 14 10:12:07 beaglebone systemd[1]: Started OpenBSD Secure Shell server.
Feb 14 10:12:07 beaglebone systemd[1]: Started LSB: Load kernel modules needed to enable cpufreq scaling.
Feb 14 10:12:07 beaglebone systemd[1]: Starting LSB: set CPUFreq kernel parameters...
Feb 14 10:12:07 beaglebone sh[930]: am335x_evm: usb_image_file=[/var/local/usb_mass_storage.img]
Feb 14 10:12:08 beaglebone cpufrequtils[964]: CPUFreq Utilities: Setting performance CPUFreq governor...CPU0...done.
Feb 14 10:12:08 beaglebone systemd[1]: Started LSB: set CPUFreq kernel parameters.
Feb 14 10:12:08 beaglebone dbus-daemon[877]: [system] Successfully activated service 'org.freedesktop.hostname1'
Feb 14 10:12:08 beaglebone systemd[1]: Started Hostname Service.
Feb 14 10:12:09 beaglebone sh[930]: bb_generate_mac.sh /etc/cpsw_0_mac: [C4:F3:12:81:6C:68]
Feb 14 10:12:09 beaglebone sh[930]: bb_generate_mac.sh /etc/cpsw_1_mac: [C4:F3:12:81:6C:6A]
Feb 14 10:12:09 beaglebone sh[930]: bb_generate_mac.sh /etc/cpsw_2_mac: [C4:F3:12:81:6C:6B]
Feb 14 10:12:09 beaglebone sh[930]: bb_generate_mac.sh /etc/cpsw_3_mac: [C4:F3:12:81:6C:6C]
Feb 14 10:12:09 beaglebone sh[930]: bb_generate_mac.sh /etc/cpsw_4_mac: [C4:F3:12:81:6C:6D]
Feb 14 10:12:09 beaglebone sh[930]: bb_generate_mac.sh /etc/cpsw_5_mac: [C4:F3:12:81:6C:6E]
Feb 14 10:12:09 beaglebone sh[930]: am335x_evm: use_libcomposite
Feb 14 10:12:10 beaglebone sh[930]: am335x_evm: FIXME: no valid drive to share over usb
Feb 14 10:12:10 beaglebone sh[930]: am335x_evm: modprobe libcomposite
Feb 14 10:12:10 beaglebone sh[930]: am335x_evm: Creating g_multi
Feb 14 10:12:10 beaglebone kernel: [   22.342758] using random self ethernet address
Feb 14 10:12:10 beaglebone kernel: [   22.342777] using random host ethernet address
Feb 14 10:12:10 beaglebone sh[930]: /opt/scripts/boot/am335x_evm.sh: 461: echo: echo: I/O error
Feb 14 10:12:10 beaglebone sh[930]: ln: failed to create symbolic link 'os_desc/c.1': File exists
Feb 14 10:12:10 beaglebone sh[930]: mkdir: cannot create directory ‘functions/rndis.usb0/os_desc/interface.rndis/Icons’: File exists
Feb 14 10:12:10 beaglebone sh[930]: mkdir: cannot create directory ‘functions/rndis.usb0/os_desc/interface.rndis/Label’: File exists
Feb 14 10:12:10 beaglebone sh[930]: ln: failed to create symbolic link 'configs/c.1/rndis.usb0': File exists
Feb 14 10:12:11 beaglebone kernel: [   22.871242] using random self ethernet address
Feb 14 10:12:11 beaglebone kernel: [   22.871260] using random host ethernet address
Feb 14 10:12:11 beaglebone systemd[1]: Found device /dev/ttyS0.
Feb 14 10:12:11 beaglebone systemd[1]: Started Serial Getty on ttyS0.
Feb 14 10:12:11 beaglebone connmand[882]: usb0 {create} index 4 type 1 <ETHER>
Feb 14 10:12:11 beaglebone connmand[882]: usb0 {update} flags 4098 <DOWN>
Feb 14 10:12:11 beaglebone kernel: [   23.101435] usb0: HOST MAC c4:f3:12:81:6c:6b
Feb 14 10:12:11 beaglebone connmand[882]: usb0 {newlink} index 4 address 00:00:00:00:00:00 mtu 1500
Feb 14 10:12:11 beaglebone kernel: [   23.108182] usb0: MAC c4:f3:12:81:6c:6a
Feb 14 10:12:11 beaglebone kernel: [   23.109344] usb1: HOST MAC c4:f3:12:81:6c:6d
Feb 14 10:12:11 beaglebone kernel: [   23.109435] usb1: MAC c4:f3:12:81:6c:6e
Feb 14 10:12:11 beaglebone connmand[882]: usb0 {newlink} index 4 operstate 2 <DOWN>
Feb 14 10:12:11 beaglebone connmand[882]: Ignoring interface usb0 (filtered)
Feb 14 10:12:11 beaglebone sh[930]: am335x_evm: g_multi Created
Feb 14 10:12:11 beaglebone sh[930]: am335x_evm: Starting usb0 network
Feb 14 10:12:11 beaglebone connmand[882]: Adding interface usb0 [ gadget ]
Feb 14 10:12:11 beaglebone connmand[882]: usb0 {newlink} index 4 address C4:F3:12:81:6C:6A mtu 1500
Feb 14 10:12:11 beaglebone connmand[882]: usb0 {newlink} index 4 operstate 2 <DOWN>
Feb 14 10:12:11 beaglebone connmand[882]: Ignoring interface usb0 (filtered)
Feb 14 10:12:11 beaglebone connmand[882]: usb1 {create} index 5 type 1 <ETHER>
Feb 14 10:12:11 beaglebone connmand[882]: usb1 {update} flags 4098 <DOWN>
Feb 14 10:12:11 beaglebone connmand[882]: usb1 {newlink} index 5 address 00:00:00:00:00:00 mtu 1500
Feb 14 10:12:11 beaglebone connmand[882]: usb1 {newlink} index 5 operstate 2 <DOWN>
Feb 14 10:12:11 beaglebone connmand[882]: Ignoring interface usb1 (filtered)
Feb 14 10:12:11 beaglebone connmand[882]: Adding interface usb1 [ gadget ]
Feb 14 10:12:11 beaglebone connmand[882]: usb1 {newlink} index 5 address C4:F3:12:81:6C:6E mtu 1500
Feb 14 10:12:11 beaglebone connmand[882]: usb1 {newlink} index 5 operstate 2 <DOWN>
Feb 14 10:12:11 beaglebone connmand[882]: Ignoring interface usb1 (filtered)
Feb 14 10:12:11 beaglebone connmand[882]: usb0 {add} address 192.168.7.2/24 label usb0 family 2
Feb 14 10:12:11 beaglebone connmand[882]: usb0 {update} flags 4099 <UP>
Feb 14 10:12:11 beaglebone connmand[882]: usb0 {newlink} index 4 address C4:F3:12:81:6C:6A mtu 1500
Feb 14 10:12:11 beaglebone connmand[882]: usb0 {newlink} index 4 operstate 2 <DOWN>
Feb 14 10:12:11 beaglebone connmand[882]: Ignoring interface usb0 (filtered)
Feb 14 10:12:11 beaglebone connmand[882]: usb0 {add} route 192.168.7.0 gw 0.0.0.0 scope 253 <LINK>
Feb 14 10:12:11 beaglebone kernel: [   23.317233] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
Feb 14 10:12:11 beaglebone sh[930]: am335x_evm: Starting usb1 network
Feb 14 10:12:11 beaglebone kernel: [   23.454437] configfs-gadget gadget: high-speed config #1: c
Feb 14 10:12:11 beaglebone kernel: [   23.454873] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
Feb 14 10:12:11 beaglebone connmand[882]: usb0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Feb 14 10:12:11 beaglebone connmand[882]: usb0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Feb 14 10:12:11 beaglebone connmand[882]: usb0 {newlink} index 4 address C4:F3:12:81:6C:6A mtu 1500
Feb 14 10:12:11 beaglebone connmand[882]: usb0 {newlink} index 4 operstate 6 <UP>
Feb 14 10:12:11 beaglebone connmand[882]: Ignoring interface usb0 (filtered)
Feb 14 10:12:11 beaglebone connmand[882]: usb1 {add} address 192.168.6.2/24 label usb1 family 2
Feb 14 10:12:11 beaglebone connmand[882]: usb1 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Feb 14 10:12:11 beaglebone connmand[882]: usb1 {newlink} index 5 address C4:F3:12:81:6C:6E mtu 1500
Feb 14 10:12:11 beaglebone connmand[882]: usb1 {newlink} index 5 operstate 0 <UNKNOWN>
Feb 14 10:12:11 beaglebone connmand[882]: Ignoring interface usb1 (filtered)
Feb 14 10:12:11 beaglebone connmand[882]: usb1 {add} route 192.168.6.0 gw 0.0.0.0 scope 253 <LINK>
Feb 14 10:12:11 beaglebone connmand[882]: usb1 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Feb 14 10:12:12 beaglebone connmand[882]: usb1 {RX} 4 packets 592 bytes
Feb 14 10:12:12 beaglebone connmand[882]: usb1 {TX} 3 packets 266 bytes
Feb 14 10:12:12 beaglebone connmand[882]: usb1 {newlink} index 5 address C4:F3:12:81:6C:6E mtu 1500
Feb 14 10:12:12 beaglebone connmand[882]: usb1 {newlink} index 5 operstate 6 <UP>
Feb 14 10:12:12 beaglebone connmand[882]: Ignoring interface usb1 (filtered)
Feb 14 10:12:14 beaglebone haveged[859]: haveged: ver: 1.9.1; arch: generic; vend: ; build: (gcc 8.3.0 CTV); collect: 128K
Feb 14 10:12:14 beaglebone haveged[859]: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 12/40; sz: 15012/57848
Feb 14 10:12:14 beaglebone haveged[859]: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B):  last entropy estimate 7.99738
Feb 14 10:12:14 beaglebone haveged[859]: haveged: fills: 0, generated: 0
Feb 14 10:12:19 beaglebone systemd-udevd[855]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Feb 14 10:12:19 beaglebone systemd-udevd[862]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Feb 14 10:12:21 beaglebone kernel: [   33.767820] wlan-en-regulator: disabling
Feb 14 10:12:30 beaglebone systemd-udevd[853]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Feb 14 10:12:30 beaglebone systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Feb 14 10:12:30 beaglebone systemd[1]: systemd-fsckd.service: Succeeded.
Feb 14 10:12:30 beaglebone systemd[1]: Found device /dev/ttyGS0.
Feb 14 10:12:30 beaglebone systemd[1]: Started Serial Getty on ttyGS0.
Feb 14 10:12:30 beaglebone systemd[1]: Reached target Login Prompts.
Feb 14 10:12:30 beaglebone systemd-udevd[857]: Using default interface naming scheme 'v240'.
Feb 14 10:12:30 beaglebone systemd-udevd[854]: Using default interface naming scheme 'v240'.
Feb 14 10:12:30 beaglebone systemd-udevd[857]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Feb 14 10:12:30 beaglebone systemd-udevd[854]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Feb 14 10:12:30 beaglebone systemd[1]: generic-board-startup.service: Succeeded.
Feb 14 10:12:30 beaglebone systemd[1]: Started Generic Board Startup.
Feb 14 10:12:30 beaglebone systemd[1]: Starting BB WL18xx Bluetooth Service...
Feb 14 10:12:31 beaglebone bb-wl18xx-bluetooth[1746]: Found a Texas Instruments' chip!
Feb 14 10:12:31 beaglebone bb-wl18xx-bluetooth[1746]: Firmware file : /lib/firmware/ti-connectivity/TIInit_11.8.32.bts
Feb 14 10:12:31 beaglebone bb-wl18xx-bluetooth[1746]: Loaded BTS script version 1
Feb 14 10:12:31 beaglebone bb-wl18xx-bluetooth[1746]: texas: changing baud rate to 3000000, flow control to 1
Feb 14 10:12:31 beaglebone kernel: [   43.678657] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Feb 14 10:12:31 beaglebone kernel: [   43.691190] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Feb 14 10:12:31 beaglebone kernel: [   43.691564] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
Feb 14 10:12:31 beaglebone kernel: [   43.691745] cfg80211: failed to load regulatory.db
Feb 14 10:12:32 beaglebone kernel: [   43.809792] Bluetooth: Core ver 2.22
Feb 14 10:12:32 beaglebone kernel: [   43.810023] NET: Registered protocol family 31
Feb 14 10:12:32 beaglebone kernel: [   43.810032] Bluetooth: HCI device and connection manager initialized
Feb 14 10:12:32 beaglebone kernel: [   43.810061] Bluetooth: HCI socket layer initialized
Feb 14 10:12:32 beaglebone kernel: [   43.810074] Bluetooth: L2CAP socket layer initialized
Feb 14 10:12:32 beaglebone kernel: [   43.810139] Bluetooth: SCO socket layer initialized
Feb 14 10:12:32 beaglebone kernel: [   43.849345] Bluetooth: HCI UART driver ver 2.3
Feb 14 10:12:32 beaglebone kernel: [   43.849366] Bluetooth: HCI UART protocol H4 registered
Feb 14 10:12:32 beaglebone kernel: [   43.849552] Bluetooth: HCI UART protocol LL registered
Feb 14 10:12:32 beaglebone kernel: [   43.849561] Bluetooth: HCI UART protocol ATH3K registered
Feb 14 10:12:32 beaglebone kernel: [   43.849680] Bluetooth: HCI UART protocol Three-wire (H5) registered
Feb 14 10:12:32 beaglebone systemd[1]: Starting Load/Save RF Kill Switch Status...
Feb 14 10:12:32 beaglebone systemd[1]: Starting Bluetooth service...
Feb 14 10:12:32 beaglebone systemd[1]: Started Load/Save RF Kill Switch Status.
Feb 14 10:12:32 beaglebone bluetoothd[1779]: Bluetooth daemon 5.50
Feb 14 10:12:32 beaglebone systemd[1]: Started Bluetooth service.
Feb 14 10:12:32 beaglebone systemd[1]: Reached target Bluetooth.
Feb 14 10:12:32 beaglebone bluetoothd[1779]: Starting SDP server
Feb 14 10:12:32 beaglebone kernel: [   44.507864] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Feb 14 10:12:32 beaglebone kernel: [   44.507880] Bluetooth: BNEP filters: protocol multicast
Feb 14 10:12:32 beaglebone kernel: [   44.507911] Bluetooth: BNEP socket layer initialized
Feb 14 10:12:32 beaglebone bluetoothd[1779]: Bluetooth management interface 1.14 initialized
Feb 14 10:12:32 beaglebone bluetoothd[1779]: Sap driver initialization failed.
Feb 14 10:12:32 beaglebone bluetoothd[1779]: sap-server: Operation not permitted (1)
Feb 14 10:12:33 beaglebone bb-wl18xx-bluetooth[1746]: Device setup complete
Feb 14 10:12:33 beaglebone systemd[1]: Started BB WL18xx Bluetooth Service.
Feb 14 10:12:33 beaglebone systemd[1]: Reached target Multi-User System.
Feb 14 10:12:33 beaglebone systemd[1]: Reached target Graphical Interface.
Feb 14 10:12:33 beaglebone systemd[1]: Starting Update UTMP about System Runlevel Changes...
Feb 14 10:12:33 beaglebone systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Feb 14 10:12:33 beaglebone systemd[1]: Started Update UTMP about System Runlevel Changes.
Feb 14 10:12:33 beaglebone systemd[1]: Startup finished in 9.745s (kernel) + 35.319s (userspace) = 45.065s.
Feb 14 10:12:33 beaglebone kernel: [   45.328838] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
Feb 14 10:12:33 beaglebone kernel: [   45.343301] wlcore: loaded
Feb 14 10:12:33 beaglebone connmand[882]: wlan0 {create} index 6 type 1 <ETHER>
Feb 14 10:12:33 beaglebone connmand[882]: wlan0 {update} flags 4098 <DOWN>
Feb 14 10:12:33 beaglebone connmand[882]: wlan0 {newlink} index 6 address F0:45:DA:EB:A9:93 mtu 1500
Feb 14 10:12:33 beaglebone connmand[882]: wlan0 {newlink} index 6 operstate 2 <DOWN>
Feb 14 10:12:34 beaglebone kernel: [   45.932257] wlcore: PHY firmware version: Rev 8.2.0.0.242
Feb 14 10:12:34 beaglebone kernel: [   45.980271] wlcore: firmware booted (Rev 8.9.0.0.79)
Feb 14 10:12:34 beaglebone kernel: [   45.995983] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Feb 14 10:12:34 beaglebone systemd-udevd[857]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Feb 14 10:12:34 beaglebone connmand[882]: Adding interface wlan0 [ wifi ]
Feb 14 10:12:34 beaglebone connmand[882]: wlan0 {update} flags 36931 <UP,RUNNING>
Feb 14 10:12:34 beaglebone connmand[882]: wlan0 {newlink} index 6 address F0:45:DA:EB:A9:93 mtu 1500
Feb 14 10:12:34 beaglebone connmand[882]: wlan0 {newlink} index 6 operstate 0 <UNKNOWN>
Feb 14 10:12:34 beaglebone connmand[882]: wlan0 {update} flags 36867 <UP>
Feb 14 10:12:34 beaglebone connmand[882]: wlan0 {newlink} index 6 address F0:45:DA:EB:A9:93 mtu 1500
Feb 14 10:12:34 beaglebone connmand[882]: wlan0 {newlink} index 6 operstate 2 <DOWN>
Feb 14 10:12:34 beaglebone connmand[882]: wlan0 {newlink} index 6 address F0:45:DA:EB:A9:93 mtu 1500
Feb 14 10:12:34 beaglebone connmand[882]: wlan0 {newlink} index 6 operstate 2 <DOWN>
Feb 14 10:12:34 beaglebone wpa_supplicant[892]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Feb 14 10:12:34 beaglebone wpa_supplicant[892]: wlan0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
Feb 14 10:12:38 beaglebone systemd[1]: systemd-rfkill.service: Succeeded.
Feb 14 10:13:02 beaglebone systemd[1]: systemd-hostnamed.service: Succeeded.
Feb 14 10:14:25 beaglebone wpa_supplicant[892]: wlan0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
Feb 14 10:14:59 beaglebone systemd[1]: Stopped target Timers.
Feb 14 10:14:59 beaglebone systemd[1]: systemd-tmpfiles-clean.timer: Succeeded.
Feb 14 10:14:59 beaglebone systemd[1]: Stopped Daily Cleanup of Temporary Directories.
Feb 14 10:14:59 beaglebone systemd[1]: Stopped target Bluetooth.
Feb 14 10:14:59 beaglebone systemd[1]: logrotate.timer: Succeeded.
Feb 14 10:14:59 beaglebone systemd[1]: Stopped Daily rotation of log files.
Feb 14 10:14:59 beaglebone systemd[1]: Stopped target System Time Synchronized.
Feb 14 10:14:59 beaglebone systemd[1]: Stopped target Graphical Interface.
Feb 14 10:14:59 beaglebone systemd[1]: Stopped target Multi-User System.
Feb 14 10:14:59 beaglebone systemd[1]: Stopping Login Service...
Feb 14 10:14:59 beaglebone kernel: [  191.464419] Bluetooth: hci0: sending frame failed (-49)
Feb 14 10:14:59 beaglebone systemd[1]: Stopping BB WL18xx Bluetooth Service...
RobertCNelson commented 4 years ago

@JoseGoncalves yeah... that would happen if you disable bb-wl18xx-wlan0.service...

usb0/usb1 and SoftAp0 have a shared requirement, dnsmasq, which get's set here:

https://github.com/beagleboard/customizations/blob/master/usr/bin/bb_dnsmasq_config.sh

On a normal bootup, generic-board-startup.service runs:

https://github.com/beagleboard/customizations/blob/master/lib/systemd/system/generic-board-startup.service

Which calls:

https://github.com/RobertCNelson/boot-scripts/blob/master/boot/generic-startup.sh

Then calls:

https://github.com/RobertCNelson/boot-scripts/blob/master/boot/am335x_evm.sh

The board gets detected:

https://github.com/RobertCNelson/boot-scripts/blob/master/boot/am335x_evm.sh#L124-L199

For non "wifi" dnsmasq_usb0_usb1 get's set which then calls:

/usr/bin/bb_dnsmasq_config.sh directly

https://github.com/RobertCNelson/boot-scripts/blob/master/boot/am335x_evm.sh#L729-L731

For the boards with WiFi, wl18xx module can take forever to load, so am335x_evm.sh does not call /usr/bin/bb_dnsmasq_config.sh and instead that is left for bb-wl18xx-wlan0.service to handle

Regards,

So yeah... How do YOU want to fix this?

RobertCNelson commented 4 years ago

@JoseGoncalves the current theory, uses would disable "TETHER_ENABLED=yes" in /etc/default/bb-wl18xx

RobertCNelson commented 4 years ago

(wrong button for comment)... https://github.com/rcn-ee/repos/blob/master/bb-wl18xx-firmware/suite/stretch/debian/postinst#L19-L55

RobertCNelson commented 4 years ago

Yeah, this is already implemented..

sudo sed -i -e 's:TETHER_ENABLED=yes:TETHER_ENABLED=no:g' /etc/default/bb-wl18xx

Regards,

RobertCNelson commented 4 years ago

NO that's not entirerly true, when you disable tether..

https://github.com/rcn-ee/repos/blob/master/bb-wl18xx-firmware/suite/stretch/debian/bb-wl18xx-wlan0#L193-L195

/usr/bin/bb-wl18xx-tether doesn't get called which fire up dnsmasq setting..

    if [ "x${TETHER_ENABLED}" = "xyes" ] ; then
        /usr/bin/bb-wl18xx-tether || true
    fi
    if [ "x${TETHER_ENABLED}" = "xyes" ] ; then
        /usr/bin/bb-wl18xx-tether || true
    else
        /usr/bin/bb_dnsmasq_config.sh || true
    fi

then from here:

https://github.com/beagleboard/customizations/blob/master/usr/bin/bb_dnsmasq_config.sh#L32-L34

read the TETHER_ENABLED variable..

Regards,

JoseGoncalves commented 4 years ago

Hit @RobertCNelson. I will try to see if I can find a way to get USB interfaces up without depending on the bb-wl18xx-wlan0.service.

My ultimate goal is to setup a wireless mesh network with BeagleBones, and, for that, I need to previously shut down the existing wlan0 and SoftAp0 interfaces.

I think I have already tried set the config TETHER_ENABLED=nowith the same results, i.e., the USB network interfaces are not started properly (but I need to recheck that).

RobertCNelson commented 4 years ago

@JoseGoncalves , we cross posts, i think the fix in 

    if [ "x${TETHER_ENABLED}" = "xyes" ] ; then
        /usr/bin/bb-wl18xx-tether || true
    else
        /usr/bin/bb_dnsmasq_config.sh || true
    fi

^^broken.

        if [ "x${TETHER_ENABLED}" = "xyes" ] ; then
                /usr/bin/bb-wl18xx-tether || true
        else
                /usr/bin/bb_dnsmasq_config.sh || true
                systemctl restart dnsmasq || true
        fi

^^ works in /usr/bin/bb-wl18xx-wlan0

and then patch /usr/bin/bb_dnsmasq_config.sh to read /etc/default/bb-wl18xx's TETHER_ENABLED=no would allow you do do that..

The main point of "/usr/bin/bb-wl18xx-wlan0" is, TI's firmware/driver sucks, set the MAC address.. Then call teh rest of the stack..

Regards,

RobertCNelson commented 4 years ago

https://github.com/beagleboard/customizations/blob/master/usr/bin/bb_dnsmasq_config.sh#L52-L55

unset got_softap0
if [ -d /sys/class/net/${ap_interface} ] ; then
    got_softapt0=enable
fi
unset got_softap0
if [ "x${TETHER_ENABLED}" = "xyes" ] ; then
if [ -d /sys/class/net/${ap_interface} ] ; then
    got_softapt0=enable
fi
fi

yeah, those 2 changes...

RobertCNelson commented 4 years ago

@JoseGoncalves okay that works: SoftAp0 is gone..

debian@beaglebone:~$ sudo ifconfig -a
[sudo] password for debian: 
can0: flags=128<NOARP>  mtu 16
        unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen 10  (UNSPEC)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 43  

can1: flags=128<NOARP>  mtu 16
        unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen 10  (UNSPEC)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 44  

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 480  bytes 34400 (33.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 480  bytes 34400 (33.5 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

usb0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.7.2  netmask 255.255.255.252  broadcast 192.168.7.3
        inet6 fe80::f65e:abff:fe6e:1972  prefixlen 64  scopeid 0x20<link>
        ether f4:5e:ab:6e:19:72  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 41  bytes 9346 (9.1 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

usb1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.6.2  netmask 255.255.255.252  broadcast 192.168.6.3
        inet6 fe80::f65e:abff:fe6e:1976  prefixlen 64  scopeid 0x20<link>
        ether f4:5e:ab:6e:19:76  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 43  bytes 7646 (7.4 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=-28605<UP,BROADCAST,RUNNING,MULTICAST,DYNAMIC>  mtu 1500
        inet 192.168.1.210  netmask 255.255.252.0  broadcast 192.168.3.255
        inet6 fe80::6ec3:74ff:fee6:1225  prefixlen 64  scopeid 0x20<link>
        ether 6c:c3:74:e6:12:25  txqueuelen 1000  (Ethernet)
        RX packets 70  bytes 7557 (7.3 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 73  bytes 12687 (12.3 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

and i cna login:

voodoo@hestia:/opt/git_repo/debian$ ssh debian@192.168.7.2
The authenticity of host '192.168.7.2 (192.168.7.2)' can't be established.
ECDSA key fingerprint is SHA256:hrg7KQ8N7V+8l2MF6D/VnIVhX5Eg3WB/qZjm5qx5fdo.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '192.168.7.2' (ECDSA) to the list of known hosts.
Debian GNU/Linux 9

BeagleBoard.org Debian Image 2020-03-01

Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian

default username:password is [debian:temppwd]

debian@192.168.7.2's password: 

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Mar 22 14:59:11 2020
debian@beaglebone:~$
RobertCNelson commented 4 years ago 

debian@beaglebone:~$ cat /etc/dnsmasq.d/SoftAp0 
interface=usb0
interface=usb1
port=53
dhcp-authoritative
domain-needed
bogus-priv
expand-hosts
cache-size=2048
dhcp-range=usb0,192.168.7.1,192.168.7.1,2m
dhcp-range=usb1,192.168.6.1,192.168.6.1,2m
listen-address=127.0.0.1
listen-address=192.168.7.2
listen-address=192.168.6.2
dhcp-option=usb0,3
dhcp-option=usb0,6
dhcp-option=usb1,3
dhcp-option=usb1,6
dhcp-leasefile=/var/run/dnsmasq.leases
``
RobertCNelson commented 4 years ago

https://github.com/RobertCNelson/bb-wl18xx-firmware/commit/58b0a1ffef1e6c424de228d8ae1cbee06f485c69

RobertCNelson commented 4 years ago

and https://github.com/rcn-ee/customizations/commit/d496f17d16bc65fc106f57d886f87e78986c1cce

RobertCNelson commented 4 years ago

and all pushed out to the apt repo.. @JoseGoncalves hopefully that helps setup your base for mesh on top..

PS, if mesh needs some special options, it might be a good idea to use /etc/default/bb-wl18xx and have /usr/bin/bb-wl18xx-wlan0 set it up?

JoseGoncalves commented 4 years ago

I can confirm that, with the changes that you have performed, I can disable the AP interface with the TETHER_ENABLED variable, while retaining the USB network connectivity. Thank you for the quick fix!

Your idea to support wi-fi mesh seems fine to me, i.e., to add some MESH_ENABLED variable in /etc/default/bb-wl18xx and to adjust /usr/bin/bb-wl18xx-wlan0 script to support the required changes. I will look into it, after I have the mesh properly set...