Open mjeveritt opened 3 years ago
mjeveritt
commented
3 years ago It looks like the builder has stalled/etc as the images on https://forum.digikey.com/t/debian-getting-started-with-the-beaglebone-black/12967 are certainly unaffected. Pinging @RobertCNelson as I suspect this is his domain?! :wave:
RobertCNelson
commented
3 years ago uSD 'standalone' images are packed with the flasher script as default, and not self-booting. bone-debian-10.5-console-armhf-2020-08-25-1gb.img.xz
Testing... Validated, what is wrong with bone-debian-10.5-console-armhf-2020-08-25-1gb.img.xz???
U-Boot SPL 2019.04-00002-gc9b3922522 (Aug 24 2020 - 16:42:18 -0500)
Trying to boot from MMC1
Loading Environment from EXT4... ** File not found /boot/uboot.env **
** Unable to read "/boot/uboot.env" from mmc0:1 **
U-Boot 2019.04-00002-gc9b3922522 (Aug 24 2020 - 16:42:18 -0500), Build: jenkins-github_Bootloader-Builder-144
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Power-on reset has occurred.
RTC 32KCLK Source: External.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Loading Environment from EXT4... ** File not found /boot/uboot.env **
** Unable to read "/boot/uboot.env" from mmc0:1 **
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone Cape EEPROM: no EEPROM at address: 0x54
BeagleBone Cape EEPROM: no EEPROM at address: 0x55
BeagleBone Cape EEPROM: no EEPROM at address: 0x56
BeagleBone Cape EEPROM: no EEPROM at address: 0x57
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 0 seconds
board_name=[A335BNLT] ...
board_rev=[00C0] ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
Checking for: /boot.scr ...
Checking for: /boot/boot.scr ...
Checking for: /boot/uEnv.txt ...
gpio: pin 55 (gpio 55) value is 1
1894 bytes read in 58 ms (31.3 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
gpio: pin 56 (gpio 56) value is 1
Running uname_boot ...
loading /boot/vmlinuz-4.19.94-ti-r50 ...
10162688 bytes read in 688 ms (14.1 MiB/s)
debug: [enable_uboot_overlays=1] ...
debug: [enable_uboot_cape_universal=1] ...
debug: [uboot_base_dtb_univ=am335x-boneblack-uboot-univ.dtb] ...
uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot-univ.dtb] ...
uboot_overlays: Switching too: dtb=am335x-boneblack-uboot-univ.dtb ...
loading /boot/dtbs/4.19.94-ti-r50/am335x-boneblack-uboot-univ.dtb ...
163571 bytes read in 130 ms (1.2 MiB/s)
uboot_overlays: [fdt_buffer=0x60000] ...
uboot_overlays: loading /lib/firmware/BB-ADC-00A0.dtbo ...
867 bytes read in 167 ms (4.9 KiB/s)
uboot_overlays: loading /lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo ...
1584 bytes read in 102 ms (14.6 KiB/s)
uboot_overlays: loading /lib/firmware/BB-HDMI-TDA998x-00A0.dtbo ...
4915 bytes read in 435 ms (10.7 KiB/s)
uboot_overlays: loading /lib/firmware/AM335X-PRU-RPROC-4-19-TI-00A0.dtbo ...
3801 bytes read in 371 ms (9.8 KiB/s)
loading /boot/initrd.img-4.19.94-ti-r50 ...
6618986 bytes read in 467 ms (13.5 MiB/s)
debug: [console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet] ...
debug: [bootz 0x82000000 0x88080000:64ff6a 88000000] ...
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Ramdisk to 8f9b0000, end 8fffff6a ... OK
Loading Device Tree to 8f924000, end 8f9affff ... OK
Starting kernel ...
[ 0.002200] timer_probe: no matching timers found
[ 0.190639] l4_wkup_cm:clk:0010:0: failed to disable
[ 1.412183] omap_voltage_late_init: Voltage driver support not added
Debian GNU/Linux 10 beaglebone ttyS0
BeagleBoard.org Debian Buster Console Image 2020-08-25
Support: https://bbb.io/debian
default username:password is [debian:temppwd]
beaglebone login: debian
Password:
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh
We trust you have received the usual lecture from the local System
Administrator. It usually boils down to these three things:
#1) Respect the privacy of others.
#2) Think before you type.
#3) With great power comes great responsibility.
[sudo] password for debian:
eeprom:[A335BNLT00C02516BBBK2626]
model:[TI_AM335x_BeagleBone_Black]
dogtag:[BeagleBoard.org Debian Buster Console Image 2020-08-25]
bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot 2019.04-00002-gc9b3922522]:[location: dd MBR]
UBOOT: Booted Device-Tree:[am335x-boneblack-uboot-univ.dts]
UBOOT: Loaded Overlay:[AM335X-PRU-RPROC-4-19-TI-00A0]
UBOOT: Loaded Overlay:[BB-ADC-00A0]
UBOOT: Loaded Overlay:[BB-BONE-eMMC1-01-00A0]
UBOOT: Loaded Overlay:[BB-HDMI-TDA998x-00A0]
kernel:[4.19.94-ti-r50]
/boot/uEnv.txt Settings:
uboot_overlay_options:[enable_uboot_overlays=1]
uboot_overlay_options:[uboot_overlay_pru=AM335X-PRU-RPROC-4-19-TI-00A0.dtbo]
uboot_overlay_options:[enable_uboot_cape_universal=1]
pkg check: to individually upgrade run: [sudo apt install --only-upgrade <pkg>]
pkg:[bb-cape-overlays]:[4.14.20200814.0-0~buster+20200814]
pkg:[bb-wl18xx-firmware]:[1.20200813.1-0~buster+20200813]
pkg:[kmod]:[26-1]
WARNING:pkg:[librobotcontrol]:[NOT_INSTALLED]
pkg:[firmware-ti-connectivity]:[20190717-2rcnee1~buster+20200305]
groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev users systemd-journal input bluetooth netdev gpio admin spi iio i2c docker tisdk weston-launch xenomai cloud9ide pwm eqep remoteproc]
cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet]
dmesg | grep remote
dmesg | grep pru
dmesg | grep pinctrl-single
[ 0.921417] pinctrl-single 44e10800.pinmux: 142 pins, size 568
dmesg | grep gpio-of-helper
[ 0.934885] gpio-of-helper ocp:cape-universal: ready
END
debian@beaglebone:~$ @mjeveritt please state what is wrong with which specific image.. If it's actually still broken with 2020-08-25, it's probably also broken with https://rcn-ee.net/rootfs/bb.org/testing/2021-07-07/
Regards,
mjeveritt
commented
3 years ago @mjeveritt please state what is wrong with which specific image.. If it's actually still broken with 2020-08-25, it's probably also broken with https://rcn-ee.net/rootfs/bb.org/testing/2021-07-07/
Regards,
I'll double-check, as I think I misinterpreted some of the LED sequences in the new images! :roll_eyes: It does look like there are some issues, but I will test all of the 'latest-images' and 'latest-testing-images' and see what I'm doing wrong, or where which image is failing.
Thanks for the prompt ACK nonetheless ! :smiley:
Describe the bug Latest testing images are nearly a year old, and an older version of Debian than released. uSD 'standalone' images are packed with the flasher script as default, and not self-booting.
Describe which image you are running (example: bone-debian-10.2-iot-armhf-2020-02-03-4gb.img.xz)
bone-debian-10.5-console-armhf-2020-08-25-1gb.img.xzper https://elinux.org/Beagleboard:Latest-images-testing#Debian_10_.28Buster.29_ConsoleDescribe your hardware BBB-C (4Gb)
Describe any Capes Installed N/A
Please run this built-in script
sudo /opt/scripts/tools/version.shTo Reproduce
Expected behavior Current Debian image/kernels boot from SD card