Fly lines for USB3.0 failed

beagleboard / beaglebone-ai-64

Mirror of https://git.beagleboard.org/beagleboard/beaglebone-ai-64

https://beaglebone.ai/64

Creative Commons Attribution 4.0 International

6 stars 0 forks source link

Fly lines for USB3.0 failed #20

Closed mingzhangqun closed 2 years ago

mingzhangqun commented 3 years ago

I removed USB2.0 hub chip, and fly lines for usb3.0. dts config: https://github.com/mingzhangqun/BeagleBoard-DeviceTrees/commit/4feab83a1263585f300ec5c5dbe084b7ba6cb738 It doesn't recognize usb-disk, could you help me check the DTS?

f846a3c2f54f114d74698f7669acb97

jadonk commented 3 years ago

SuperSpeed is really high for wire leads. The HighSpeed works without any wire mods: https://github.com/beagleboard/BeagleBoard-DeviceTrees/pull/46/commits/89221030688f7e1718d8280ef261de3f51364136

mingzhangqun commented 3 years ago

Sorry, I'm talking about Type-A, it's using usb1. And the fly lines are USB2.0 bus lines(work fine), USB3.0 ss are on PCB(not work). f6989d16df1e54d870dfaec0c8c6c0d 5aa05a983470f485acffd8398e85e12

mingzhangqun commented 2 years ago

It's ok now: https://github.com/beagleboard/beaglebone-ai-64/issues/4