sometimes kernel boot, but it freeze up

beagleboard / beaglebone-ai-64

Mirror of https://git.beagleboard.org/beagleboard/beaglebone-ai-64

Creative Commons Attribution 4.0 International

6 stars 0 forks source link

[10-14-18-22-09.790]U-Boot SPL 2021.01-gdaedcf37 (Sep 21 2022 - 23:44:04 +0000) [10-14-18-22-09.790]Model: Texas Instruments K3 J721E SoC [10-14-18-22-09.790]EEPROM not available at 0x50, trying to read at 0x51 [10-14-18-22-09.793]Board: BBONEAI-64-B0- rev B0 [10-14-18-22-09.818]SYSFW ABI: 3.1 (firmware rev 0x0015 '21.9.1--v2021.09a (Terrific Lla') [10-14-18-22-09.847]TLB table from ffffc000 to 00000000 [10-14-18-22-09.847]>>SPL: board_init_r() [10-14-18-22-09.847]spl_init [10-14-18-22-09.872]Trying to boot from MMC2 [10-14-18-22-09.872]spl: mmc boot mode: fs [10-14-18-22-09.872]board_fit_image_post_process: processing image: addr=70000000, size=39864, os=arm-trusted-firmware [10-14-18-22-09.905]board_fit_image_post_process: matched image for ID 0 [10-14-18-22-09.905]board_fit_image_post_process: processing image: addr=9e800000, size=374648, os=tee [10-14-18-22-09.915]board_fit_image_post_process: matched image for ID 1 [10-14-18-22-09.930]board_fit_image_post_process: processing image: addr=89000000, size=217356, os=DM [10-14-18-22-09.946]board_fit_image_post_process: matched image for ID 3 [10-14-18-22-09.947]board_fit_image_post_process: processing image: addr=80080000, size=163184, os=U-Boot [10-14-18-22-09.963]board_fit_image_post_process: matched image for ID 2 [10-14-18-22-09.963]board_fit_image_post_process: processing image: addr=ffffffff, size=10103, os= [10-14-18-22-09.977]Unsupported OS image.. Jumping nevertheless.. [10-14-18-22-09.983]loaded - jumping to U-Boot... [10-14-18-22-10.075]jump_to_image_no_args: jumping to address 41010000 [10-14-18-22-10.081]Starting ATF on ARM64 core... [10-14-18-22-10.081] [10-14-18-22-10.081]NOTICE: BL31: v2.5(release):0588523 [10-14-18-22-10.100]NOTICE: BL31: Built : 23:44:04, Sep 21 2022 [10-14-18-22-10.159] [10-14-18-22-10.164]U-Boot SPL 2021.01-gdaedcf37 (Sep 21 2022 - 23:44:04 +0000) [10-14-18-22-10.164]Model: Texas Instruments K3 J721E SoC [10-14-18-22-10.180]Board: BBONEAI-64-B0- rev B0 [10-14-18-22-10.199]SYSFW ABI: 3.1 (firmware rev 0x0015 '21.9.1--v2021.09a (Terrific Lla') [10-14-18-22-10.199]TLB table from ffff4000 to 100000000 [10-14-18-22-10.232]SPL malloc() before relocation used 0x2500 bytes (9 KB) [10-14-18-22-10.232]>>SPL: board_init_r() [10-14-18-22-10.232]spl_init [10-14-18-22-10.299]ti_i2c_eeprom_am6_parse_record: Ignoring record id 17 [10-14-18-22-10.322]Trying to boot from MMC2 [10-14-18-22-10.363]spl: mmc boot mode: fs [10-14-18-22-10.696]Jumping to U-Boot [10-14-18-22-10.696]loaded - jumping to U-Boot... [10-14-18-22-10.727]image entry point: 0x80800000 [10-14-18-22-11.031] [10-14-18-22-11.032] [10-14-18-22-11.040]U-Boot 2021.01-gdaedcf37 (Sep 21 2022 - 23:44:04 +0000) [10-14-18-22-11.040] [10-14-18-22-11.040]SoC: J721E SR2.0 [10-14-18-22-11.082]Model: Texas Instruments K3 J721E SoC [10-14-18-22-11.082]Board: BBONEAI-64-B0- rev B0 [10-14-18-22-11.082]DRAM: 4 GiB [10-14-18-22-11.084]Flash: 0 Bytes [10-14-18-22-11.107]MMC: sdhci@4f80000: 0, sdhci@4fb0000: 1 [10-14-18-22-11.214]Loading Environment from FAT... ** No partition table - mmc 0 ** [10-14-18-22-11.215]In: serial@2800000 [10-14-18-22-11.239]Out: serial@2800000 [10-14-18-22-11.240]Err: serial@2800000 [10-14-18-22-11.314]ti_i2c_eeprom_am6_parse_record: Ignoring record id 17 [10-14-18-22-11.335]Net: am65_cpsw_nuss_slave ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000 [10-14-18-22-11.335]eth0: ethernet@46000000 [10-14-18-22-11.335]Press SPACE to abort autoboot in 2 seconds [10-14-18-22-13.322]board_name=[BBONEAI-64-B0-] ... [10-14-18-22-13.357]name_fdt=[k3-j721e-beagleboneai64.dtb] ... [10-14-18-22-13.358]i2c_write: error waiting for data ACK (status=0x116) [10-14-18-22-13.358]pca953x gpio@22: Error reading output register [10-14-18-22-13.397]switch to partitions #0, OK [10-14-18-22-13.406]mmc1 is current device [10-14-18-22-13.406]Scanning mmc 1:1... [10-14-18-22-13.406]Found /extlinux/extlinux.conf [10-14-18-22-13.430]Retrieving file: /extlinux/extlinux.conf [10-14-18-22-13.430]212 bytes read in 7 ms (29.3 KiB/s) [10-14-18-22-13.430]1: Linux microSD [10-14-18-22-13.436]Retrieving file: /initrd.img [10-14-18-22-14.087]15374003 bytes read in 660 ms (22.2 MiB/s) [10-14-18-22-14.114]Retrieving file: /Image [10-14-18-22-15.323]28813824 bytes read in 1229 ms (22.4 MiB/s) [10-14-18-22-15.352]append: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 root=/dev/mmcblk1p2 ro rootfstype=ext4 rootwait net.ifnames=0 quiet [10-14-18-22-15.352]Retrieving file: /k3-j721e-beagleboneai64.dtb [10-14-18-22-15.379]203817 bytes read in 17 ms (11.4 MiB/s) [10-14-18-22-15.379]## Flattened Device Tree blob at 88000000 [10-14-18-22-15.383] Booting using the fdt blob at 0x88000000 [10-14-18-22-15.412] Loading Ramdisk to 8f156000, end 8ffff6b3 ... OK [10-14-18-22-15.465] Loading Device Tree to 000000008f121000, end 000000008f155c28 ... OK [10-14-18-22-15.465]Linux kernel Image start = 0x82000000 end = 0x83c40000 [10-14-18-22-15.465] [10-14-18-22-15.465]Starting kernel ... [10-14-18-22-15.489] [10-14-18-22-16.042][ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] [10-14-18-22-16.051][ 0.000000] Linux version 5.10.120-ti-arm64-r63 (voodoo@rpi4b8g-19) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1bullseye SMP Fri Sep 2 01:18:17 UTC 2022 [10-14-18-22-16.084][ 0.000000] Machine model: BeagleBoard.org BeagleBone AI-64 [10-14-18-22-16.112][ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [10-14-18-22-16.112][ 0.000000] printk: bootconsole [ns16550a0] enabled [10-14-18-22-16.909][ 0.703721] k3-ringacc 2b800000.ringacc: Failed to get MSI domain [10-14-18-22-16.950][ 0.710014] k3-ringacc 3c000000.ringacc: Failed to get MSI domain [10-14-18-22-17.108][ 0.903885] k3-ringacc 2b800000.ringacc: Failed to get MSI domain [10-14-18-22-17.151][ 0.910222] k3-ringacc 3c000000.ringacc: Failed to get MSI domain [10-14-18-22-17.434][ 1.213270] davinci_mdio c000f00.mdio: timed out waiting for user access [10-14-18-22-17.536][ 1.320074] davinci_mdio c000f00.mdio: timed out waiting for idle [10-14-18-22-18.686][ 2.458349] spi-nor spi1.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff [10-14-18-22-18.868][ 2.653193] davinci_mdio c000f00.mdio: timed out waiting for user access [10-14-18-22-18.966][ 2.759992] davinci_mdio c000f00.mdio: timed out waiting for idle [10-14-18-22-18.996][ 2.767607] am65-cpsw-nuss c000000.ethernet: /bus@100000/ethernet@c000000/ethernet-ports/port@1 error retrieving port phy: -19 [10-14-18-22-19.698][ 3.493455] debugfs: Directory 'pd:27' with parent 'pm_genpd' already present! [10-14-18-22-19.738][ 3.500693] debugfs: Directory 'pd:26' with parent 'pm_genpd' already present! [10-14-18-22-19.739][ 3.509125] debugfs: Directory 'pd:242' with parent 'pm_genpd' already present! [10-14-18-22-19.739][ 3.516448] debugfs: Directory 'pd:241' with parent 'pm_genpd' already present! [10-14-18-22-19.739][ 3.523764] debugfs: Directory 'pd:240' with parent 'pm_genpd' already present! [10-14-18-22-19.772][ 3.531070] debugfs: Directory 'pd:239' with parent 'pm_genpd' already present! [10-14-18-22-21.309][ 5.101679] Unable to handle kernel paging request at virtual address ffff000b100b88c0 [10-14-18-22-21.314][ 5.101741] Unable to handle kernel paging request at virtual address ffff001d7f970b00 [10-14-18-22-21.347][ 5.109590] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [10-14-18-22-21.347][ 5.117476] Mem abort info: [10-14-18-22-21.347][ 5.126234] Mem abort info: [10-14-18-22-21.347][ 5.129012] ESR = 0x96000005 [10-14-18-22-21.347][ 5.129015] EC = 0x25: DABT (current EL), IL = 32 bits [10-14-18-22-21.348][ 5.131791] ESR = 0x86000004 [10-14-18-22-21.348][ 5.131794] EC = 0x21: IABT (current EL), IL = 32 bits [10-14-18-22-21.354][ 5.134831] SET = 0, FnV = 0 [10-14-18-22-21.354][ 5.134833] EA = 0, S1PTW = 0 [10-14-18-22-21.382][ 5.140124] SET = 0, FnV = 0 [10-14-18-22-21.382][ 5.140126] EA = 0, S1PTW = 0 [10-14-18-22-21.382][ 5.143164] Data abort info: [10-14-18-22-21.382][ 5.143165] ISV = 0, ISS = 0x00000005 [10-14-18-22-21.382][ 5.148459] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000895669000 [10-14-18-22-21.382][ 5.151495] CM = 0, WnR = 0 [10-14-18-22-21.414][ 5.151497] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000835ad000 [10-14-18-22-21.414][ 5.154622] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [10-14-18-22-21.414][ 5.157662] [ffff001d7f970b00] pgd=00000008ffff8003, p4d=00000008ffff8003 [10-14-18-22-21.414][ 5.160788] [10-14-18-22-21.415][ 5.160792] Internal error: Oops: 86000004 [#1] SMP [10-14-18-22-21.415][ 5.163653] , pud=0000000000000000 [10-14-18-22-21.415][ 5.167475] Modules linked in: [10-14-18-22-21.418][ 5.206775] Unable to handle kernel paging request at virtual address ffff8000090b9100 [10-14-18-22-21.446][ 5.217706] Mem abort info: [10-14-18-22-21.446][ 5.220485] ESR = 0x96000007 [10-14-18-22-21.446][ 5.223525] EC = 0x25: DABT (current EL), IL = 32 bits [10-14-18-22-21.446][ 5.228819] SET = 0, FnV = 0 [10-14-18-22-21.446][ 5.231858] EA = 0, S1PTW = 0 [10-14-18-22-21.446][ 5.234983] Data abort info: [10-14-18-22-21.446][ 5.237850] ISV = 0, ISS = 0x00000007 [10-14-18-22-21.446][ 5.241670] CM = 0, WnR = 0 [10-14-18-22-21.449][ 5.244623] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000835ad000 [10-14-18-22-21.476][ 5.251304] [ffff8000090b9100] pgd=00000008fffff003, p4d=00000008fffff003, pud=00000008ffffe003, pmd=0000000895636003, pte=00680003951cc708

default factory Image unable to boot case2:

U-Boot SPL 2021.01-gdaedcf37 (Sep 21 2022 - 23:44:04 +0000)
Model: Texas Instruments K3 J721E SoC
Board: BBONEAI-64-B0- rev B0
SYSFW ABI: 3.1 (firmware rev 0x0015 '21.9.1--v2021.09a (Terrific Lla')
TLB table from ffffc000 to 00000000
>>SPL: board_init_r()
spl_init
Trying to boot from MMC2
spl: mmc boot mode: fs
board_fit_image_post_process: processing image: addr=70000000, size=39864, os=arm-trusted-firmware
board_fit_image_post_process: matched image for ID 0
board_fit_image_post_process: processing image: addr=9e800000, size=374648, os=tee
board_fit_image_post_process: matched image for ID 1
board_fit_image_post_process: processing image: addr=89000000, size=217356, os=DM
board_fit_image_post_process: matched image for ID 3
board_fit_image_post_process: processing image: addr=80080000, size=163184, os=U-Boot
board_fit_image_post_process: matched image for ID 2
board_fit_image_post_process: processing image: addr=ffffffff, size=10103, os=
Unsupported OS image.. Jumping nevertheless..
loaded - jumping to U-Boot...
jump_to_image_no_args: jumping to address 41010000
Starting ATF on ARM64 core...

NOTICE:  BL31: v2.5(release):0588523
NOTICE:  BL31: Built : 23:44:04, Sep 21 2022

U-Boot SPL 2021.01-gdaedcf37 (Sep 21 2022 - 23:44:04 +0000)
Model: Texas Instruments K3 J721E SoC
Board: BBONEAI-64-B0- rev B0
SYSFW ABI: 3.1 (firmware rev 0x0015 '21.9.1--v2021.09a (Terrific Lla')
TLB table from ffff4000 to 100000000
SPL malloc() before relocation used 0x2500 bytes (9 KB)
>>SPL: board_init_r()
spl_init
ti_i2c_eeprom_am6_parse_record: Ignoring record id 17
Trying to boot from MMC2
spl: mmc boot mode: fs
Jumping to U-Boot
loaded - jumping to U-Boot...
image entry point: 0x80800000

U-Boot 2021.01-gdaedcf37 (Sep 21 2022 - 23:44:04 +0000)

SoC:   J721E SR2.0
Model: Texas Instruments K3 J721E SoC
Board: BBONEAI-64-B0- rev B0
DRAM:  4 GiB
Flash: 0 Bytes
MMC:   sdhci@4f80000: 0, sdhci@4fb0000: 1
Loading Environment from FAT... ** No partition table - mmc 0 **
In:    serial@2800000
Out:   serial@2800000
Err:   serial@2800000
ti_i2c_eeprom_am6_parse_record: Ignoring record id 17
Net:   am65_cpsw_nuss_slave ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000
eth0: ethernet@46000000
Press SPACE to abort autoboot in 2 seconds
board_name=[BBONEAI-64-B0-] ...
name_fdt=[k3-j721e-beagleboneai64.dtb] ...
i2c_write: error waiting for data ACK (status=0x116)
pca953x gpio@22: Error reading output register
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
229 bytes read in 8 ms (27.3 KiB/s)
Ignoring unknown command:     init=/bin/sh
Ignoring unknown command:     initrd
1:      Linux microSD
Retrieving file: /Image
28813824 bytes read in 1229 ms (22.4 MiB/s)
append: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 root=/dev/mmcblk1p2 ro rootfstype=ext4 rootwait net.ifnames=0 quiet
Retrieving file: /k3-j721e-beagleboneai64.dtb
203817 bytes read in 19 ms (10.2 MiB/s)
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Loading Device Tree to 000000008ffcb000, end 000000008ffffc28 ... OK
Linux kernel Image start = 0x82000000 end = 0x83c40000

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080]
[    0.000000] Linux version 5.10.120-ti-arm64-r63 (voodoo@rpi4b8g-19) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1bullseye SMP Fri Sep 2 01:18:17 UTC 2022
[    0.000000] Machine model: BeagleBoard.org BeagleBone AI-64
[    0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[    0.000000] printk: bootconsole [ns16550a0] enabled
[    0.430763] k3-ringacc 2b800000.ringacc: Failed to get MSI domain
[    0.437058] k3-ringacc 3c000000.ringacc: Failed to get MSI domain
[    0.610224] k3-ringacc 2b800000.ringacc: Failed to get MSI domain
[    0.616575] k3-ringacc 3c000000.ringacc: Failed to get MSI domain
[    0.724160] cdns-mhdp8546 a000000.dp-bridge: cdns_mhdp_fw_cb: No firmware.
[    0.913000] davinci_mdio c000f00.mdio: timed out waiting for user access
[    1.019800] davinci_mdio c000f00.mdio: timed out waiting for idle
[    2.150541] spi-nor spi1.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff
[    2.341053] davinci_mdio c000f00.mdio: timed out waiting for user access
[    2.447851] davinci_mdio c000f00.mdio: timed out waiting for idle
[    2.455451] am65-cpsw-nuss c000000.ethernet: /bus@100000/ethernet@c000000/ethernet-ports/port@1 error retrieving port phy: -19
[    2.932900] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
[    3.201230] debugfs: Directory 'pd:27' with parent 'pm_genpd' already present!
[    3.208476] debugfs: Directory 'pd:26' with parent 'pm_genpd' already present!
[    3.216913] debugfs: Directory 'pd:242' with parent 'pm_genpd' already present!
[    3.224231] debugfs: Directory 'pd:241' with parent 'pm_genpd' already present!
[    3.231541] debugfs: Directory 'pd:240' with parent 'pm_genpd' already present!
[    3.238855] debugfs: Directory 'pd:239' with parent 'pm_genpd' already present!
[  OK  ] Started Show Plymouth Boot Screen.
[  OK  ] Started Forward Password R to Plymouth Directory Watch.
[  OK  ] Reached target Local Encrypted Volumes.
[  OK  ] Reached target Paths.
[  OK  ] Started Network Service.
[  OK  ] Finished Load/Save Random Seed.
[  OK  ] Found device /dev/ttyS2.
[    7.725070] ov5640 4-003c: ov5640_read_reg: error: reg=300a
[    7.730658] ov5640 4-003c: ov5640_check_chip_id: failed to read chip identifier
[    7.745098] img_enc 4200000.video-encoder: vxe_enc_probe: using heap 1 for internal alloc
[  OK  ] Reached target Hardware activated USB gadget.
[    7.814308] k3-dsp-rproc 4d80800000.dsp: configured DSP for remoteproc mode
[    7.830205] ov5640 6-003c: ov5640_read_reg: error: reg=300a
[    7.835832] ov5640 6-003c: ov5640_check_chip_id: failed to read chip identifier
[    7.840940] k3-dsp-rproc 4d81800000.dsp: configured DSP for remoteproc mode
[    7.870582] k3-dsp-rproc 4d80800000.dsp: booting DSP core using boot addr = 0xa8d9a000
[    7.878557] k3-dsp-rproc 64800000.dsp: configured DSP for remoteproc mode
[    7.948956] k3-dsp-rproc 4d81800000.dsp: booting DSP core using boot addr = 0xa9d9a000
[    8.150516] platform 41000000.r5f: configured R5F for IPC-only mode
[    8.157673] platform 41000000.r5f: R5F core initialized in IPC-only mode
[    8.183719] platform 5c00000.r5f: configured R5F for remoteproc mode
[    8.212494] platform 5d00000.r5f: configured R5F for remoteproc mode
[    8.238432] platform 5e00000.r5f: configured R5F for remoteproc mode
[    8.247542] remoteproc remoteproc6: request_firmware failed: -2
[    8.304137] platform 5f00000.r5f: configured R5F for remoteproc mode
[    8.327215] k3-dsp-rproc 64800000.dsp: booting DSP core using boot addr = 0xaa200000
[    8.344939] remoteproc remoteproc7: request_firmware failed: -2
[  OK  ] Found device /dev/mmcblk1p1.
         Mounting /boot/firmware...
[  OK  ] Mounted /boot/firmware.
[  OK  ] Reached target Local File Systems.
         Starting Load AppArmor profiles...
         Starting Set console font and keymap...
         Starting Tell Plymouth To Write Out Runtime Data...
         Starting Create Volatile Files and Directories...
[  OK  ] Finished Tell Plymouth To Write Out Runtime Data.
[  OK  ] Finished Set console font and keymap.
[  OK  ] Finished Create Volatile Files and Directories.
         Starting Network Name Resolution...
         Starting Network Time Synchronization...
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Finished Update UTMP about System Boot/Shutdown.
[  OK  ] Finished Load AppArmor profiles.
         Starting Raise network interfaces...
[  OK  ] Finished Raise network interfaces.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target System Time Set.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Periodic ext4 Onlita Check for All Filesystems.
[  OK  ] Started Discard unused blocks once a week.
[  OK  ] Started Daily rotation of log files.
[  OK  ] Reached target Timers.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Listening on D-Bus System Message Bus Socket.
         Starting Docker Socket for the API.
[  OK  ] Listening on GPS (Global Poning System) Daemon Sockets.
[  OK  ] Listening on Docker Socket for the API.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting Avahi mDNS/DNS-SD Stack...
         Starting BeagleBoard Generate Symlinks...
         Starting BeagleBoard.org USB gadgets...
[  OK  ] Started Regular background program processing daemon.
[  OK  ] Started D-Bus System Message Bus.
         Starting dphys-swapfile - nt, and delete a swap file...
         Starting Remove Stale Onli4 Metadata Check Snapshots...
         Starting Initialize hardware monitoring sensors...
         Starting System Logging Service...
         Starting User Login Management...
         Starting LSB: Start daemon at boot time...
         Starting Disk Manager...
         Starting WPA supplicant...
[  OK  ] Finished BeagleBoard Generate Symlinks.
[  OK  ] Started Network Name Resolution.
[  OK  ] Reached target Host and Network Name Lookups.
[  OK  ] Finished Initialize hardware monitoring sensors.
[  OK  ] Finished Remove Stale Onlixt4 Metadata Check Snapshots.
[  OK  ] Listening on Load/Save RF tch Status /dev/rfkill Watch.
[  OK  ] Started System Logging Service.
[  OK  ] Started User Login Management.
[  OK  ] Started WPA supplicant.
[  OK  ] Reached target Network.
[  OK  ] Reached target Network is Online.
         Starting Beagle Flasher Shutdown...
         Starting containerd container runtime...
         Starting LSB: disk temperature monitoring daemon...
         Starting A high performancand a reverse proxy server...
         Starting OpenBSD Secure Shell server...
         Starting Permit User Sessions...
[  OK  ] Finished dphys-swapfile - ount, and delete a swap file.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
[  OK  ] Started LSB: disk temperature monitoring daemon.
[  OK  ] Finished Beagle Flasher Shutdown.
[  OK  ] Finished Permit User Sessions.
         Starting Light Display Manager...
         Starting Hold until boot process finishes up...
[  OK  ] Started LSB: Start daemon at boot time.
[  OK  ] Started OpenBSD Secure Shell server.
         Starting Authorization Manager...
[  OK  ] Finished Hold until boot process finishes up.
[   10.825488] Unable to handle kernel paging request at virtual address ffff0040181d5420
[   10.825600] Unable to handle kernel paging request at virtual address 000800000000006f
[   10.833391] Mem abort info:
[   10.841283] Mem abort info:
[   10.844062]   ESR = 0x96000005
[   10.846841]   ESR = 0x96000004
[   10.849881]   EC = 0x25: DABT (current EL), IL = 32 bits
[   10.852919]   EC = 0x25: DABT (current EL), IL = 32 bits
[   10.858210]   SET = 0, FnV = 0
[   10.858212]   EA = 0, S1PTW = 0
[   10.863503]   SET = 0, FnV = 0
[   10.863505]   EA = 0, S1PTW = 0
[   10.866543] Data abort info:
[   10.866545]   ISV = 0, ISS = 0x00000005
[   10.869669] Data abort info:
[   10.869671]   ISV = 0, ISS = 0x00000004
[   10.872710]   CM = 0, WnR = 0
[   10.872712] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000835ad000
[   10.875836]   CM = 0, WnR = 0
[   10.875838] [000800000000006f] address between user and kernel address ranges
[   10.878703] [ffff0040181d5420] pgd=00000008ffff8003
[   10.882524] Internal error: Oops: 96000004 [#1] SMP
[   10.885387] , p4d=00000008ffff8003, pud=0000000000000000
[   10.889208] Modules linked in:
[   10.892158] 
[   10.898836]  rpmsg_char virtio_rpmsg_bus irq_pruss_intc pru_rproc ti_am335x_adc icss_iep cdns_csi2rx crct10dif_ce ti_k3_r5_remoteproc ti_am335x_tscadc pruss pvrsrvkm(O) ti_k3_dsp_remoteproc sa2ul authenc vxd_dec vxe_enc j721e_csi2rx videobuf2_dma_sg v4l2_mem2mem videobuf2_dma_contig cdns_dphy ov5640 extcon_usbc_tusb322 v4l2_fwnode pci_endpoint_test rti_wdt ti_j721e_cpsw_virt_mac uio_pdrv_genirq uio gb_uart(C) gb_spi(C) gb_raw(C) gb_netlink gb_loopback(C) gb_log(C) gb_i2c(C) gb_hid(C) gb_gpio(C) gb_gbphy(C) gb_firmware(C) gb_spilib(C) gb_bootrom(C) greybus wpanusb ieee802154_socket mac802154 ieee802154 ip_tables x_tables
[   10.983273] CPU: 1 PID: 508 Comm: containerd Tainted: G         C O      5.10.120-ti-arm64-r63 #1bullseye
[   10.992813] Hardware name: BeagleBoard.org BeagleBone AI-64 (DT)
[   10.998802] pstate: 80000085 (Nzcv daIf -PAN -UAO -TCO BTYPE=--)
[   11.004799] pc : kernfs_notify+0x14/0x110
[   11.008796] lr : cgroup_file_notify+0x60/0x9c
[   11.013137] sp : ffff800013be38f0
[   11.016437] x29: ffff800013be38f0 x28: 0000000000000000 
[   11.021733] x27: ffff0008100b8f38 x26: 0000000000000001 
[   11.027029] x25: 0000000000000001 x24: 0000000000000001 
[   11.032324] x23: ffff800011684a20 x22: ffff800011957000 
[   11.037619] x21: 0000000000000000 x20: ffff800011b9a988 
[   11.042914] x19: 0007ffffffffffff x18: 0000000000000000 
[   11.048209] x17: 0000000000000000 x16: 0000000000000000 
[   11.053504] x15: 0000000000000003 x14: 0000000000000001 
[   11.058800] x13: 000000000005af07 x12: 0000000000000000 
[   11.064095] x11: 0000000000000000 x10: ffff800013be3a10 
[   11.069390] x9 : ffff0008100b9008 x8 : 0000000000000001 
[   11.074685] x7 : ffff80001195fc89 x6 : 0000000000009500 
[   11.079980] x5 : 0000000000000000 x4 : 0000000000000000 
[   11.085275] x3 : ffff800011b9a998 x2 : 0007ffffffffffff 
[   11.090570] x1 : 0000000000000003 x0 : 0007ffffffffffff 
[   11.095865] Call trace:
[   11.098301]  kernfs_notify+0x14/0x110
[   11.101948]  cgroup_file_notify+0x60/0x9c
[   11.105944]  memcg_memory_event+0xec/0xf0
[   11.109939]  try_charge+0x124/0x6e0
[   11.113412]  mem_cgroup_charge+0x5c/0x290
[   11.117408]  __add_to_page_cache_locked+0x228/0x400
[   11.122270]  add_to_page_cache_lru+0x54/0xf4
[   11.126524]  page_cache_ra_unbounded+0x140/0x240
[   11.131125]  do_page_cache_ra+0x44/0x54
[   11.134945]  filemap_fault+0x5ec/0x844
[   11.138680]  ext4_filemap_fault+0x34/0x9f0
[   11.142761]  __do_fault+0x3c/0x1d0
[   11.146147]  handle_mm_fault+0x8bc/0xddc
[   11.150057]  do_page_fault+0x168/0x3b4
[   11.153790]  do_translation_fault+0xb0/0xcc
[   11.157960]  do_mem_abort+0x44/0xa4
[   11.161435]  el0_da+0x28/0x34
[   11.164388]  el0_sync_handler+0x168/0x1b0
[   11.168383]  el0_sync+0x180/0x1c0
[   11.171686] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (7940e000) 
[   11.177761] ---[ end trace ac950de4dbb9cbd5 ]---
[   11.182363] Internal error: Oops: 96000005 [#2] SMP
[   11.182370] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[   11.187224] Modules linked in:
[   11.195981] Mem abort info:
[   11.195983]  rpmsg_char
[   11.199022]   ESR = 0x86000006
[   11.201801]  virtio_rpmsg_bus
[   11.204234]   EC = 0x21: IABT (current EL), IL = 32 bits
[   11.207272]  irq_pruss_intc
[   11.210223]   SET = 0, FnV = 0
[   11.210224]   EA = 0, S1PTW = 0
[   11.215516]  pru_rproc
[   11.218295] user pgtable: 4k pages, 48-bit VAs, pgdp=00000008985a2000
[   11.221332]  ti_am335x_adc
[   11.224458] [0000000000000000] pgd=0000000898288003
[   11.226802]  icss_iep
[   11.233220] , p4d=0000000898288003, pud=00000008983dd003
[   11.235914]  cdns_csi2rx
[   11.240773] , pmd=0000000000000000
[   11.243031]  crct10dif_ce
[   11.248322] 
[   11.250841]  ti_k3_r5_remoteproc ti_am335x_tscadc pruss pvrsrvkm(O) ti_k3_dsp_remoteproc sa2ul authenc vxd_dec vxe_enc j721e_csi2rx videobuf2_dma_sg v4l2_mem2mem videobuf2_dma_contig cdns_dphy ov5640 extcon_usbc_tusb322 v4l2_fwnode pci_endpoint_test rti_wdt ti_j721e_cpsw_virt_mac uio_pdrv_genirq uio gb_uart(C) gb_spi(C) gb_raw(C) gb_netlink gb_loopback(C) gb_log(C) gb_i2c(C) gb_hid(C) gb_gpio(C) gb_gbphy(C) gb_firmware(C) gb_spilib(C) gb_bootrom(C) greybus wpanusb ieee802154_socket mac802154 ieee802154 ip_tables x_tables
[   11.304384] CPU: 0 PID: 207 Comm: systemd-journal Tainted: G      D  C O      5.10.120-ti-arm64-r63 #1bullseye
[   11.314357] Hardware name: BeagleBoard.org BeagleBone AI-64 (DT)
[   11.320344] pstate: 40000085 (nZcv daIf -PAN -UAO -TCO BTYPE=--)
[   11.326332] pc : mem_cgroup_swap_full+0x530/0xad0
[   11.331020] lr : drain_obj_stock+0xac/0x1c0
[   11.335188] sp : ffff800012223900
[   11.338488] x29: ffff800012223900 x28: ffff000815059228 
[   11.343784] x27: 000000000000001b x26: ffff0008146524d0 
[   11.349079] x25: ffff000818fc0380 x24: ffff000810001c00 
[   11.354374] x23: ffff0008182a8600 x22: 0000000000000000 
[   11.359670] x21: 0000000000000b00 x20: ffff0040181d5408 
[   11.364965] x19: ffff00087f96aa20 x18: 0000000000000000 
[   11.370260] x17: 0000000000000000 x16: 0000000000000000 
[   11.375555] x15: ffff0008182a8600 x14: 0000000000000000 
[   11.380850] x13: 0000000000000000 x12: 0000000000000000 
[   11.386145] x11: 0000aaaade9348b0 x10: 0000000000000800 
[   11.391440] x9 : ffff000810f3ab80 x8 : 206c6167656c6c69 
[   11.396735] x7 : 203a4c4c49474953 x6 : 0000aaaade9348cb 
[   11.402030] x5 : 0000000000000600 x4 : 0000000000000001 
[   11.407324] x3 : 0000000000000008 x2 : ffff0040181d5420 
[   11.412620] x1 : ffff0040181d5420 x0 : 0000000000000000 
[   11.417915] Call trace:
[   11.420350]  mem_cgroup_swap_full+0x530/0xad0
[   11.424691]  refill_obj_stock+0x4c/0x130
[   11.428599]  obj_cgroup_uncharge+0x10/0x1c
[   11.432678]  kfree+0x354/0x490
[   11.435722]  skb_release_data+0x150/0x1b0
[   11.439716]  consume_skb+0x48/0x100
[   11.443192]  unix_stream_read_generic+0x7c0/0x8d0
[   11.447880]  unix_stream_recvmsg+0x4c/0x74
[   11.451962]  ____sys_recvmsg+0x200/0x2d0
[   11.455870]  ___sys_recvmsg+0x88/0x120
[   11.459604]  __sys_recvmsg+0x64/0xc0
[   11.463164]  __arm64_sys_recvmsg+0x28/0x34
[   11.467246]  el0_svc_common.constprop.0+0x78/0x1c4
[   11.472021]  do_el0_svc+0x24/0x8c
[   11.475321]  el0_svc+0x14/0x20
[   11.478362]  el0_sync_handler+0x1a4/0x1b0
[   11.482356]  el0_sync+0x180/0x1c0
[   11.485659] Code: d503201f d503201f d503201f f9800051 (885f7c40) 
[   11.491732] ---[ end trace ac950de4dbb9cbd6 ]---
[   11.496333] Internal error: Oops: 86000006 [#3] SMP
[   11.496367] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
[   11.501194] Modules linked in:
[   11.509953] Mem abort info:
[   11.509954]  rpmsg_char virtio_rpmsg_bus
[   11.512994]   ESR = 0x96000004
[   11.515773]  irq_pruss_intc
[   11.519678]   EC = 0x25: DABT (current EL), IL = 32 bits
[   11.522716]  pru_rproc
[   11.525494]   SET = 0, FnV = 0
[   11.525496]   EA = 0, S1PTW = 0
[   11.530787]  ti_am335x_adc
[   11.533133] Data abort info:
[   11.536172]  icss_iep
[   11.539297]   ISV = 0, ISS = 0x00000004
[   11.541988]  cdns_csi2rx crct10dif_ce
[   11.544854]   CM = 0, WnR = 0
[   11.544856] user pgtable: 4k pages, 48-bit VAs, pgdp=00000008945e6000
[   11.547113]  ti_k3_r5_remoteproc
[   11.550932] [0000000000000010] pgd=0000000000000000
[   11.554577]  ti_am335x_tscadc
[   11.557528] , p4d=0000000000000000
[   11.563948]  pruss pvrsrvkm(O) ti_k3_dsp_remoteproc sa2ul authenc vxd_dec vxe_enc j721e_csi2rx videobuf2_dma_sg v4l2_mem2mem videobuf2_dma_contig cdns_dphy ov5640 extcon_usbc_tusb322 v4l2_fwnode pci_endpoint_test rti_wdt ti_j721e_cpsw_virt_mac uio_pdrv_genirq uio gb_uart(C) gb_spi(C) gb_raw(C) gb_netlink gb_loopback(C) gb_log(C) gb_i2c(C) gb_hid(C) gb_gpio(C) gb_gbphy(C) gb_firmware(C) gb_spilib(C) gb_bootrom(C) greybus wpanusb ieee802154_socket mac802154 ieee802154 ip_tables x_tables
[   11.621219] CPU: 1 PID: 508 Comm: containerd Tainted: G      D  C O      5.10.120-ti-arm64-r63 #1bullseye
[   11.630759] Hardware name: BeagleBoard.org BeagleBone AI-64 (DT)
[   11.636747] pstate: 80000085 (Nzcv daIf -PAN -UAO -TCO BTYPE=--)
[   11.642734] pc : 0x0
[   11.644914] lr : timekeeping_advance+0x64/0x540
[   11.649428] sp : ffff800011c53d30
[   11.652728] x29: ffff800011c53d30 x28: ffff00087f97f280 
[   11.658024] x27: ffff00087f97f280 x26: ffff800011b99000 
[   11.663319] x25: ffff800011672008 x24: 0000000000000080 
[   11.668614] x23: ffff800011b9a000 x22: ffff800011b99200 
[   11.673909] x21: ffff800011957000 x20: ffff800011b9a848 
[   11.679204] x19: 0000000000000001 x18: 0000000000000000 
[   11.684498] x17: 0000000000000000 x16: 0000000000000000 
[   11.689794] x15: 0000000000000030 x14: ffffffffffffffff 
[   11.695089] x13: 00000000000002fd x12: 0000000000000040 
[   11.700384] x11: ffff800011b83000 x10: ffff00081137a922 
[   11.705679] x9 : ffff800011957000 x8 : ffff0008104004b8 
[   11.710974] x7 : ffff800011b83570 x6 : 00000000fffee9b1 
[   11.716269] x5 : ffff800011b99328 x4 : 0000000000000000 
[   11.721564] x3 : ffff800011b99200 x2 : 0000000000000001 
[   11.726859] x1 : 0000000000000000 x0 : ffff800011ad8f00 
[   11.732154] Call trace:
[   11.734588]  0x0
[   11.736416]  update_wall_time+0x14/0x20
[   11.740238]  tick_do_update_jiffies64.part.0+0xc8/0x160
[   11.745444]  tick_sched_do_timer+0x88/0x90
[   11.749525]  tick_sched_timer+0x3c/0xa4
[   11.753345]  __hrtimer_run_queues+0x148/0x38c
[   11.757686]  hrtimer_interrupt+0xf0/0x2c0
[   11.761681]  arch_timer_handler_phys+0x38/0x50
[   11.766110]  handle_percpu_devid_irq+0x88/0x210
[   11.770625]  __handle_domain_irq+0x80/0xe0
[   11.774705]  gic_handle_irq+0xc0/0x140
[   11.778439]  el1_irq+0xcc/0x180
[   11.781568] Code: bad PC value
[   11.784612] ---[ end trace ac950de4dbb9cbd7 ]---
[   11.789213] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[   11.796067] SMP: stopping secondary CPUs
[   12.872476] SMP: failed to stop secondary CPUs 0-1
[   12.877256] Kernel Offset: disabled
[   12.880730] CPU features: 0x8040022,20006008
[   12.884983] Memory Limit: none
[   12.888028] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---

[10-15-20-59-38.569] [10-15-20-59-38.577]U-Boot SPL 2021.01-gdaedcf37 (Sep 21 2022 - 23:44:04 +0000) [10-15-20-59-38.577]Model: Texas Instruments K3 J721E SoC [10-15-20-59-38.611]Board: BBONEAI-64-B0- rev B0 [10-15-20-59-38.611]SYSFW ABI: 3.1 (firmware rev 0x0015 '21.9.1--v2021.09a (Terrific Lla') [10-15-20-59-38.652]TLB table from ffffc000 to 00000000 [10-15-20-59-38.652]>>SPL: board_init_r() [10-15-20-59-38.652]spl_init [10-15-20-59-38.652]Trying to boot from MMC2 [10-15-20-59-38.652]spl: mmc boot mode: fs [10-15-20-59-38.654]board_fit_image_post_process: processing image: addr=70000000, size=39864, os=arm-trusted-firmware [10-15-20-59-38.684]board_fit_image_post_process: matched image for ID 0 [10-15-20-59-38.686]board_fit_image_post_process: processing image: addr=9e800000, size=374648, os=tee [10-15-20-59-38.718]board_fit_image_post_process: matched image for ID 1 [10-15-20-59-38.719]board_fit_image_post_process: processing image: addr=89000000, size=217356, os=DM [10-15-20-59-38.752]board_fit_image_post_process: matched image for ID 3 [10-15-20-59-38.752]board_fit_image_post_process: processing image: addr=80080000, size=163184, os=U-Boot [10-15-20-59-38.752]board_fit_image_post_process: matched image for ID 2 [10-15-20-59-38.753]board_fit_image_post_process: processing image: addr=ffffffff, size=10103, os= [10-15-20-59-38.754]Unsupported OS image.. Jumping nevertheless.. [10-15-20-59-38.784]loaded - jumping to U-Boot... [10-15-20-59-38.862]jump_to_image_no_args: jumping to address 41010000 [10-15-20-59-38.900]Starting ATF on ARM64 core... [10-15-20-59-38.900] [10-15-20-59-38.900]NOTICE: BL31: v2.5(release):0588523 [10-15-20-59-38.900]NOTICE: BL31: Built : 23:44:04, Sep 21 2022 [10-15-20-59-38.945] [10-15-20-59-38.967]U-Boot SPL 2021.01-gdaedcf37 (Sep 21 2022 - 23:44:04 +0000) [10-15-20-59-38.967]Model: Texas Instruments K3 J721E SoC [10-15-20-59-38.967]Board: BBONEAI-64-B0- rev B0 [10-15-20-59-38.971]SYSFW ABI: 3.1 (firmware rev 0x0015 '21.9.1--v2021.09a (Terrific Lla') [10-15-20-59-38.971]TLB table from ffff4000 to 100000000 [10-15-20-59-39.002]SPL malloc() before relocation used 0x2500 bytes (9 KB) [10-15-20-59-39.035]>>SPL: board_init_r() [10-15-20-59-39.035]spl_init [10-15-20-59-39.101]ti_i2c_eeprom_am6_parse_record: Ignoring record id 17 [10-15-20-59-39.101]Trying to boot from MMC2 [10-15-20-59-39.148]spl: mmc boot mode: fs [10-15-20-59-39.483]Jumping to U-Boot [10-15-20-59-39.483]loaded - jumping to U-Boot... [10-15-20-59-39.522]image entry point: 0x80800000 [10-15-20-59-39.818] [10-15-20-59-39.818] [10-15-20-59-39.857]U-Boot 2021.01-gdaedcf37 (Sep 21 2022 - 23:44:04 +0000) [10-15-20-59-39.857] [10-15-20-59-39.857]SoC: J721E SR2.0 [10-15-20-59-39.857]Model: Texas Instruments K3 J721E SoC [10-15-20-59-39.857]Board: BBONEAI-64-B0- rev B0 [10-15-20-59-39.857]DRAM: 4 GiB [10-15-20-59-39.886]Flash: 0 Bytes [10-15-20-59-39.886]MMC: sdhci@4f80000: 0, sdhci@4fb0000: 1 [10-15-20-59-40.004]Loading Environment from FAT... ** No partition table - mmc 0 ** [10-15-20-59-40.004]In: serial@2800000 [10-15-20-59-40.052]Out: serial@2800000 [10-15-20-59-40.052]Err: serial@2800000 [10-15-20-59-40.119]ti_i2c_eeprom_am6_parse_record: Ignoring record id 17 [10-15-20-59-40.124]Net: am65_cpsw_nuss_slave ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000 [10-15-20-59-40.124]eth0: ethernet@46000000 [10-15-20-59-40.124]Press SPACE to abort autoboot in 2 seconds [10-15-20-59-42.111]board_name=[BBONEAI-64-B0-] ... [10-15-20-59-42.160]name_fdt=[k3-j721e-beagleboneai64.dtb] ... [10-15-20-59-42.160]i2c_write: error waiting for data ACK (status=0x116) [10-15-20-59-42.161]pca953x gpio@22: Error reading output register [10-15-20-59-42.200]switch to partitions #0, OK [10-15-20-59-42.200]mmc1 is current device [10-15-20-59-42.200]Scanning mmc 1:1... [10-15-20-59-42.200]Found /extlinux/extlinux.conf [10-15-20-59-42.206]Retrieving file: /extlinux/extlinux.conf [10-15-20-59-42.249]229 bytes read in 9 ms (24.4 KiB/s) [10-15-20-59-42.249]Ignoring unknown command: init=/bin/sh [10-15-20-59-42.249]Ignoring unknown command: initrd [10-15-20-59-42.249]1: Linux microSD [10-15-20-59-42.250]Retrieving file: /Image [10-15-20-59-43.455]28813824 bytes read in 1229 ms (22.4 MiB/s) [10-15-20-59-43.484]append: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 root=/dev/mmcblk1p2 ro rootfstype=ext4 rootwait net.ifnames=0 quiet [10-15-20-59-43.484]Retrieving file: /k3-j721e-beagleboneai64.dtb [10-15-20-59-43.518]203817 bytes read in 19 ms (10.2 MiB/s) [10-15-20-59-43.518]## Flattened Device Tree blob at 88000000 [10-15-20-59-43.521] Booting using the fdt blob at 0x88000000 [10-15-20-59-43.566] Loading Device Tree to 000000008ffcb000, end 000000008ffffc28 ... OK [10-15-20-59-43.601]Linux kernel Image start = 0x82000000 end = 0x83c40000 [10-15-20-59-43.601] [10-15-20-59-43.601]Starting kernel ... [10-15-20-59-43.601] [10-15-20-59-44.158][ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] [10-15-20-59-44.180][ 0.000000] Linux version 5.10.120-ti-arm64-r63 (voodoo@rpi4b8g-19) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1bullseye SMP Fri Sep 2 01:18:17 UTC 2022 [10-15-20-59-44.186][ 0.000000] Machine model: BeagleBoard.org BeagleBone AI-64 [10-15-20-59-44.186][ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [10-15-20-59-44.211][ 0.000000] printk: bootconsole [ns16550a0] enabled [10-15-20-59-44.747][ 0.434643] k3-ringacc 2b800000.ringacc: Failed to get MSI domain [10-15-20-59-44.781][ 0.440928] k3-ringacc 3c000000.ringacc: Failed to get MSI domain [10-15-20-59-44.928][ 0.618879] k3-ringacc 2b800000.ringacc: Failed to get MSI domain [10-15-20-59-44.968][ 0.625209] k3-ringacc 3c000000.ringacc: Failed to get MSI domain [10-15-20-59-45.058][ 0.732932] cdns-mhdp8546 a000000.dp-bridge: cdns_mhdp_fw_cb: No firmware. [10-15-20-59-45.253][ 0.921579] davinci_mdio c000f00.mdio: timed out waiting for user access [10-15-20-59-45.359][ 1.028374] davinci_mdio c000f00.mdio: timed out waiting for idle [10-15-20-59-46.024][ 1.697603] xhci-hcd xhci-hcd.0.auto: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 0 comp_code 1 [10-15-20-59-46.458][ 2.141670] Unable to handle kernel paging request at virtual address ffff00cc127abe88 [10-15-20-59-46.458][ 2.149576] Mem abort info: [10-15-20-59-46.490][ 2.152356] ESR = 0x96000004 [10-15-20-59-46.490][ 2.155400] EC = 0x25: DABT (current EL), IL = 32 bits [10-15-20-59-46.490][ 2.160697] SET = 0, FnV = 0 [10-15-20-59-46.491][ 2.163739] EA = 0, S1PTW = 0 [10-15-20-59-46.491][ 2.166869] Data abort info: [10-15-20-59-46.491][ 2.169739] ISV = 0, ISS = 0x00000004 [10-15-20-59-46.491][ 2.173559] CM = 0, WnR = 0 [10-15-20-59-46.491][ 2.176517] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000835ad000 [10-15-20-59-46.517][ 2.183201] [ffff00cc127abe88] pgd=0000000000000000, p4d=0000000000000000 [10-15-20-59-46.518][ 2.189977] Internal error: Oops: 96000004 [#1] SMP [10-15-20-59-46.518][ 2.194839] Modules linked in: [10-15-20-59-46.518][ 2.197883] CPU: 1 PID: 23 Comm: kworker/1:1 Not tainted 5.10.120-ti-arm64-r63 #1bullseye [10-15-20-59-46.561][ 2.206037] Hardware name: BeagleBoard.org BeagleBone AI-64 (DT) [10-15-20-59-46.561][ 2.212040] Workqueue: events deferred_probe_work_func [10-15-20-59-46.561][ 2.217163] pstate: a0000005 (NzCv daif -PAN -UAO -TCO BTYPE=--) [10-15-20-59-46.561][ 2.223153] pc : kmem_cache_alloc_trace+0xf4/0x350 [10-15-20-59-46.561][ 2.227927] lr : kmem_cache_alloc_trace+0x70/0x350 [10-15-20-59-46.561][ 2.232700] sp : ffff800011fd3850 [10-15-20-59-46.561][ 2.236000] x29: ffff800011fd3850 x28: ffff0008127c9b80 [10-15-20-59-46.562][ 2.241296] x27: 0000000000000000 x26: ffff80001195f000 [10-15-20-59-46.562][ 2.246592] x25: 0000000000000dc0 x24: ffff800011b7a000 [10-15-20-59-46.562][ 2.251887] x23: 00000000000000d8 x22: ffff800010a2ff38 [10-15-20-59-46.583][ 2.257183] x21: 0000000000000dc0 x20: ffff800010a2ff38 [10-15-20-59-46.583][ 2.262478] x19: ffff000810001d00 x18: 0000000000000001 [10-15-20-59-46.583][ 2.267774] x17: 000000000958fa9b x16: 00000000ba56ba5c [10-15-20-59-46.583][ 2.273069] x15: 0000000000000030 x14: ffffffffffffffff [10-15-20-59-46.586][ 2.278365] x13: ffff00081279600b x12: ffff000812796009 [10-15-20-59-46.613][ 2.283660] x11: 0000000000000000 x10: 0101010101010101 [10-15-20-59-46.614][ 2.288955] x9 : 0000000000000000 x8 : ffff000812796080 [10-15-20-59-46.614][ 2.294250] x7 : ffff800011fd3930 x6 : 0000000000000000 [10-15-20-59-46.614][ 2.299545] x5 : 0086433ea0c13484 x4 : ffff00cc127abe08 [10-15-20-59-46.617][ 2.304840] x3 : 0000000000000080 x2 : ffff800011689c00 [10-15-20-59-46.625][ 2.310136] x1 : 000000c000001800 x0 : 88be7a12cc00ffff [10-15-20-59-46.625][ 2.315432] Call trace: [10-15-20-59-46.650][ 2.317866] kmem_cache_alloc_trace+0xf4/0x350 [10-15-20-59-46.650][ 2.322295] device_add+0x438/0x7a0 [10-15-20-59-46.650][ 2.325771] pci_register_host_bridge+0x158/0x3e0 [10-15-20-59-46.651][ 2.330458] pci_scan_root_bus_bridge+0x58/0xdc [10-15-20-59-46.651][ 2.334972] pci_host_probe+0x18/0xc4 [10-15-20-59-46.651][ 2.338620] cdns_pcie_host_setup+0x564/0x8dc [10-15-20-59-46.658][ 2.342960] j721e_pcie_probe+0x494/0x800 [10-15-20-59-46.659][ 2.346953] platform_drv_probe+0x54/0xb0 [10-15-20-59-46.685][ 2.350947] really_probe+0xf0/0x510 [10-15-20-59-46.685][ 2.354507] driver_probe_device+0xf4/0x160 [10-15-20-59-46.685][ 2.358674] __device_attach_driver+0x8c/0x114 [10-15-20-59-46.685][ 2.363101] bus_for_each_drv+0x78/0xd0 [10-15-20-59-46.685][ 2.366922] __device_attach+0xdc/0x1b0 [10-15-20-59-46.685][ 2.370743] device_initial_probe+0x14/0x20 [10-15-20-59-46.686][ 2.374910] bus_probe_device+0x98/0xa0 [10-15-20-59-46.686][ 2.378731] deferred_probe_work_func+0xb4/0x10c [10-15-20-59-46.714][ 2.383335] process_one_work+0x1c8/0x490 [10-15-20-59-46.714][ 2.387328] worker_thread+0x220/0x4f4 [10-15-20-59-46.714][ 2.391063] kthread+0x124/0x12c [10-15-20-59-46.714][ 2.394279] ret_from_fork+0x10/0x34 [10-15-20-59-46.715][ 2.397842] Code: b9402a63 f9405e65 8b030080 dac00c00 (f8636882) [10-15-20-59-46.715][ 2.403918] ---[ end trace 62320f926abf58b1 ]--- [10-15-20-59-46.745][ 2.409584] list_del corruption. prev->next should be ffff800011cdbe38, but was ffff8000119b3f00 [10-15-20-59-46.745][ 2.409588] Unable to handle kernel paging request at virtual address ffff80c011078a00 [10-15-20-59-46.750][ 2.418371] ------------[ cut here ]------------ [10-15-20-59-46.750][ 2.426238] Mem abort info: [10-15-20-59-46.750][ 2.430841] Kernel BUG at __list_del_entry_valid+0x90/0xb0 [verbose debug info unavailable] [10-15-20-59-46.759][ 2.430844] Internal error: Oops - BUG: 0 [#2] SMP [10-15-20-59-46.759][ 2.433620] ESR = 0x86000004 [10-15-20-59-46.784][ 2.433623] EC = 0x21: IABT (current EL), IL = 32 bits [10-15-20-59-46.784][ 2.441947] Modules linked in: [10-15-20-59-46.784][ 2.446719] SET = 0, FnV = 0 [10-15-20-59-46.784][ 2.446720] EA = 0, S1PTW = 0 [10-15-20-59-46.784][ 2.449758] [10-15-20-59-46.785][ 2.449761] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 5.10.120-ti-arm64-r63 #1bullseye [10-15-20-59-46.785][ 2.455053] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000835ad000 [10-15-20-59-46.813][ 2.458090] Hardware name: BeagleBoard.org BeagleBone AI-64 (DT) [10-15-20-59-46.814][ 2.458092] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--) [10-15-20-59-46.814][ 2.461129] [ffff80c011078a00] pgd=0000000000000000, p4d=0000000000000000 [10-15-20-59-46.814][ 2.464256] pc : __list_del_entry_valid+0x90/0xb0 [10-15-20-59-46.820][ 2.464258] lr : __list_del_entry_valid+0x90/0xb0 [10-15-20-59-46.820][ 2.465735] [10-15-20-59-46.847][ 2.511275] sp : ffff800011c53db0 [10-15-20-59-46.847][ 2.514575] x29: ffff800011c53db0 x28: 0000000000000002 [10-15-20-59-46.848][ 2.519870] x27: 0000000000000000 x26: ffff800011956108 [10-15-20-59-46.848][ 2.525166] x25: ffff8000119b3f00 x24: ffff00087f98c630 [10-15-20-59-46.848][ 2.530461] x23: ffff8000119b3f00 x22: 0000000000000000 [10-15-20-59-46.848][ 2.535756] x21: 0000000000000080 x20: ffff8000119b6160 [10-15-20-59-46.848][ 2.541051] x19: ffff800011cdbe38 x18: 0000000000000000 [10-15-20-59-46.852][ 2.546346] x17: 00000000248b425b x16: ffff800011a8b648 [10-15-20-59-46.879][ 2.551641] x15: 0000000000000030 x14: 657270202e6e6f69 [10-15-20-59-46.880][ 2.556936] x13: 74707572726f6320 x12: 6220646c756f6873 [10-15-20-59-46.880][ 2.562232] x11: 207478656e3e2d76 x10: 6562646331313030 [10-15-20-59-46.880][ 2.567527] x9 : 3038666666662065 x8 : 6666666620736177 [10-15-20-59-46.880][ 2.572822] x7 : 20747562202c3833 x6 : ffff800011b85f07 [10-15-20-59-46.883][ 2.578118] x5 : 0000000000000001 x4 : 0000000000000000 [10-15-20-59-46.912][ 2.583413] x3 : 0000000000000000 x2 : 0000000000000000 [10-15-20-59-46.912][ 2.588708] x1 : ffff00081018ba00 x0 : 0000000000000054 [10-15-20-59-46.917][ 2.594003] Call trace: [10-15-20-59-46.917][ 2.596437] __list_del_entry_valid+0x90/0xb0 [10-15-20-59-46.917][ 2.600781] swake_up_one+0x44/0x80 [10-15-20-59-46.917][ 2.604257] rcu_gp_kthread_wake+0x60/0x84 [10-15-20-59-46.917][ 2.608338] rcu_accelerate_cbs_unlocked+0xac/0xec [10-15-20-59-46.917][ 2.613111] rcu_core+0x5c0/0x7d0 [10-15-20-59-46.920][ 2.616411] rcu_core_si+0x10/0x20 [10-15-20-59-46.947][ 2.619798] efi_header_end+0x120/0x384 [10-15-20-59-46.947][ 2.623619] irq_exit+0xdc/0xfc [10-15-20-59-46.948][ 2.626747] __handle_domain_irq+0x84/0xe0 [10-15-20-59-46.952][ 2.630830] gic_handle_irq+0xc0/0x140 [10-15-20-59-46.952][ 2.634562] el1_irq+0xcc/0x180 [10-15-20-59-46.953][ 2.637690] arch_cpu_idle+0x18/0x30 [10-15-20-59-46.953][ 2.641251] default_idle_call+0x44/0x178 [10-15-20-59-46.953][ 2.645246] do_idle+0xbc/0x12c [10-15-20-59-46.980][ 2.648373] cpu_startup_entry+0x28/0x80 [10-15-20-59-46.980][ 2.652281] secondary_start_kernel+0x138/0x174 [10-15-20-59-46.980][ 2.656797] Code: aa0003e1 b0005e80 9133e000 94221ae2 (d4210000) [10-15-20-59-46.980][ 2.662875] ---[ end trace 62320f926abf58b2 ]--- [10-15-20-59-46.981][ 2.667476] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [10-15-20-59-47.010][ 2.674850] SMP: stopping secondary CPUs [10-15-20-59-48.051][ 3.744258] SMP: failed to stop secondary CPUs 0-1 [10-15-20-59-48.084][ 3.749032] Kernel Offset: disabled [10-15-20-59-48.084][ 3.752506] CPU features: 0x8040022,20006008 [10-15-20-59-48.084][ 3.756759] Memory Limit: none [10-15-20-59-48.088][ 3.759802] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]---

beagleboard / beaglebone-ai-64

sometimes kernel boot, but it freeze up #41