Image for 1.0.6 seems too large

vlumikero commented 4 years ago

I'm using the recommended Kingston SD card, but when I try to write the img file to the card, Etcher says "Insufficient space, additional 75.5 Mb required".

basn commented 4 years ago

if you haven't solved it, flash a earlier version and then upgrade then you should be fine.

alexszilagyi commented 4 years ago

@bebben88 : Can you please share the password of the pi user on the archives that you've made?

bebben88 commented 4 years ago

It's nibe. User pi Pass nibe

Den lör 25 jan. 2020 00:36alexszilagyi notifications@github.com skrev:

@bebben88 https://github.com/bebben88 : Can you please share the password of the pi user on the archives that you've made?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/bebben88/NibePi/issues/5?email_source=notifications&email_token=AHV2OGU3VI3JKO7TB3EFVMLQ7N3OJA5CNFSM4JQWW232YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEJ4NDMI#issuecomment-578343345, or unsubscribe https://github.com/notifications/unsubscribe-auth/AHV2OGR5RXWTGVLMISVAZTDQ7N3OJANCNFSM4JQWW23Q .

bebben88 / NibePi

Image for 1.0.6 seems too large #5