Closed fvpalha closed 9 years ago
I am trying to use the Unofficial Development Kit for Espressif ESP8266 - http://www.esp8266.com/viewtopic.php?f=9&t=820. Someone have a tip?
Hi. I changed the Makefile and now all is working. Best regards.
Can you provide a diff for the Makefile change?
Hi beckdac,
I just used a Makefile from another example by esp8266-devkit (https://github.com/CHERTS/esp8266-devkit/tree/master/Espressif/examples)
#############################################################
#
# Root Level Makefile
#
# (c) by CHERTS <sleuthhound@gmail.com>
#
#############################################################
BUILD_BASE = build
FW_BASE = firmware
# Base directory for the compiler
XTENSA_TOOLS_ROOT ?= c:/Espressif/xtensa-lx106-elf/bin
# base directory of the ESP8266 SDK package, absolute
SDK_BASE ?= c:/Espressif/ESP8266_SDK
# esptool path and port
SDK_TOOLS ?= c:/Espressif/utils
ESPTOOL ?= $(SDK_TOOLS)/esptool.exe
ESPPORT ?= COM1
ESPBAUD ?= 115200
# BOOT = none
# BOOT = old - boot_v1.1
# BOOT = new - boot_v1.3+
BOOT?=none
# APP = 0 - eagle.flash.bin + eagle.irom0text.bin
# APP = 1 - user1.bin
# APP = 2 - user2.bin
APP?=0
# SPI_SPEED = 20MHz, 26.7MHz, 40MHz, 80MHz
SPI_SPEED?=40
# SPI_MODE: QIO, QOUT, DIO, DOUT
SPI_MODE?=QIO
# SPI_SIZE: 256KB, 512KB, 1024KB, 2048KB, 4096KB
SPI_SIZE?=512
ifeq ($(BOOT), new)
boot = new
else
ifeq ($(BOOT), old)
boot = old
else
boot = none
endif
endif
ifeq ($(APP), 1)
app = 1
else
ifeq ($(APP), 2)
app = 2
else
app = 0
endif
endif
ifeq ($(SPI_SPEED), 26.7)
freqdiv = 1
flashimageoptions = -ff 26m
else
ifeq ($(SPI_SPEED), 20)
freqdiv = 2
flashimageoptions = -ff 20m
else
ifeq ($(SPI_SPEED), 80)
freqdiv = 15
flashimageoptions = -ff 80m
else
freqdiv = 0
flashimageoptions = -ff 40m
endif
endif
endif
ifeq ($(SPI_MODE), QOUT)
mode = 1
flashimageoptions += -fm qout
else
ifeq ($(SPI_MODE), DIO)
mode = 2
flashimageoptions += -fm dio
else
ifeq ($(SPI_MODE), DOUT)
mode = 3
flashimageoptions += -fm dout
else
mode = 0
flashimageoptions += -fm qio
endif
endif
endif
# flash larger than 1024KB only use 1024KB to storage user1.bin and user2.bin
ifeq ($(SPI_SIZE), 256)
size = 1
flash = 256
flashimageoptions += -fs 2m
else
ifeq ($(SPI_SIZE), 1024)
size = 2
flash = 1024
flashimageoptions += -fs 8m
else
ifeq ($(SPI_SIZE), 2048)
size = 3
flash = 1024
flashimageoptions += -fs 16m
else
ifeq ($(SPI_SIZE), 4096)
size = 4
flash = 1024
flashimageoptions += -fs 32m
else
size = 0
flash = 512
flashimageoptions += -fs 4m
endif
endif
endif
endif
ifeq ($(flash), 512)
ifeq ($(app), 1)
addr = 0x01000
else
ifeq ($(app), 2)
addr = 0x41000
endif
endif
else
ifeq ($(flash), 1024)
ifeq ($(app), 1)
addr = 0x01000
else
ifeq ($(app), 2)
addr = 0x81000
endif
endif
endif
endif
# name for the target project
TARGET = app
# which modules (subdirectories) of the project to include in compiling
MODULES = driver user mqtt modules
EXTRA_INCDIR = include $(SDK_BASE)/../include
# libraries used in this project, mainly provided by the SDK
LIBS = c gcc hal phy pp net80211 lwip wpa main ssl
# compiler flags using during compilation of source files
CFLAGS = -Os -g -O2 -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -D__ets__ -DICACHE_FLASH
# linker flags used to generate the main object file
LDFLAGS = -nostdlib -Wl,--no-check-sections -u call_user_start -Wl,-static
# linker script used for the above linkier step
LD_SCRIPT = eagle.app.v6.ld
ifneq ($(boot), none)
ifneq ($(app),0)
LD_SCRIPT = eagle.app.v6.$(boot).$(flash).app$(app).ld
BIN_NAME = user$(app).$(flash).$(boot)
endif
else
app = 0
endif
# various paths from the SDK used in this project
SDK_LIBDIR = lib
SDK_LDDIR = ld
SDK_INCDIR = include include/json
# select which tools to use as compiler, librarian and linker
CC := $(XTENSA_TOOLS_ROOT)/xtensa-lx106-elf-gcc
AR := $(XTENSA_TOOLS_ROOT)/xtensa-lx106-elf-ar
LD := $(XTENSA_TOOLS_ROOT)/xtensa-lx106-elf-gcc
OBJCOPY := $(XTENSA_TOOLS_ROOT)/xtensa-lx106-elf-objcopy
OBJDUMP := $(XTENSA_TOOLS_ROOT)/xtensa-lx106-elf-objdump
# no user configurable options below here
SRC_DIR := $(MODULES)
BUILD_DIR := $(addprefix $(BUILD_BASE)/,$(MODULES))
SDK_LIBDIR := $(addprefix $(SDK_BASE)/,$(SDK_LIBDIR))
SDK_INCDIR := $(addprefix -I$(SDK_BASE)/,$(SDK_INCDIR))
SRC := $(foreach sdir,$(SRC_DIR),$(wildcard $(sdir)/*.c))
OBJ := $(patsubst %.c,$(BUILD_BASE)/%.o,$(SRC))
LIBS := $(addprefix -l,$(LIBS))
APP_AR := $(addprefix $(BUILD_BASE)/,$(TARGET)_app.a)
TARGET_OUT := $(addprefix $(BUILD_BASE)/,$(TARGET).out)
LD_SCRIPT := $(addprefix -T$(SDK_BASE)/$(SDK_LDDIR)/,$(LD_SCRIPT))
INCDIR := $(addprefix -I,$(SRC_DIR))
EXTRA_INCDIR := $(addprefix -I,$(EXTRA_INCDIR))
MODULE_INCDIR := $(addsuffix /include,$(INCDIR))
V ?= $(VERBOSE)
ifeq ("$(V)","1")
Q :=
vecho := @true
else
Q := @
vecho := @echo
endif
vpath %.c $(SRC_DIR)
define compile-objects
$1/%.o: %.c
$(vecho) "CC $$<"
$(Q) $(CC) $(INCDIR) $(MODULE_INCDIR) $(EXTRA_INCDIR) $(SDK_INCDIR) $(CFLAGS) -c $$< -o $$@
endef
.PHONY: all checkdirs clean
all: checkdirs $(TARGET_OUT)
$(TARGET_OUT): $(APP_AR)
$(vecho) "LD $@"
$(Q) $(LD) -L$(SDK_LIBDIR) $(LD_SCRIPT) $(LDFLAGS) -Wl,--start-group $(LIBS) $(APP_AR) -Wl,--end-group -o $@
$(vecho) "------------------------------------------------------------------------------"
$(vecho) "Section info:"
$(Q) $(OBJDUMP) -h -j .data -j .rodata -j .bss -j .text -j .irom0.text $@
$(vecho) "------------------------------------------------------------------------------"
$(vecho) "Section info:"
$(Q) $(SDK_TOOLS)/memanalyzer.exe $(OBJDUMP).exe $@
$(vecho) "------------------------------------------------------------------------------"
$(vecho) "Run objcopy, please wait..."
$(Q) $(OBJCOPY) --only-section .text -O binary $@ eagle.app.v6.text.bin
$(Q) $(OBJCOPY) --only-section .data -O binary $@ eagle.app.v6.data.bin
$(Q) $(OBJCOPY) --only-section .rodata -O binary $@ eagle.app.v6.rodata.bin
$(Q) $(OBJCOPY) --only-section .irom0.text -O binary $@ eagle.app.v6.irom0text.bin
$(vecho) "objcopy done"
$(vecho) "Run gen_appbin.exe"
ifeq ($(app), 0)
$(Q) $(SDK_TOOLS)/gen_appbin.exe $@ 0 $(mode) $(freqdiv) $(size)
$(Q) mv eagle.app.flash.bin $(FW_BASE)/eagle.flash.bin
$(Q) mv eagle.app.v6.irom0text.bin $(FW_BASE)/eagle.irom0text.bin
$(Q) rm eagle.app.v6.*
$(vecho) "No boot needed."
$(vecho) "Generate eagle.flash.bin and eagle.irom0text.bin successully in folder $(FW_BASE)."
$(vecho) "eagle.flash.bin-------->0x00000"
$(vecho) "eagle.irom0text.bin---->0x40000"
else
ifeq ($(boot), new)
$(Q) $(SDK_TOOLS)/gen_appbin.exe $@ 2 $(mode) $(freqdiv) $(size)
$(vecho) "Support boot_v1.3 and +"
else
$(Q) $(SDK_TOOLS)/gen_appbin.exe $@ 1 $(mode) $(freqdiv) $(size)
$(vecho) "Support boot_v1.1 and +"
endif
$(Q) mv eagle.app.flash.bin $(FW_BASE)/upgrade/$(BIN_NAME).bin
$(Q) rm eagle.app.v6.*
$(vecho) "Generate $(BIN_NAME).bin successully in folder $(FW_BASE)/upgrade."
$(vecho) "boot_v1.x.bin------->0x00000"
$(vecho) "$(BIN_NAME).bin--->$(addr)"
endif
$(vecho) "Done"
$(APP_AR): $(OBJ)
$(vecho) "AR $@"
$(Q) $(AR) cru $@ $^
checkdirs: $(BUILD_DIR) $(FW_BASE)
$(BUILD_DIR):
$(Q) mkdir -p $@
$(FW_BASE):
$(Q) mkdir -p $@
$(Q) mkdir -p $@/upgrade
flashonefile: all
$(OBJCOPY) --only-section .text -O binary $(TARGET_OUT) eagle.app.v6.text.bin
$(OBJCOPY) --only-section .data -O binary $(TARGET_OUT) eagle.app.v6.data.bin
$(OBJCOPY) --only-section .rodata -O binary $(TARGET_OUT) eagle.app.v6.rodata.bin
$(OBJCOPY) --only-section .irom0.text -O binary $(TARGET_OUT) eagle.app.v6.irom0text.bin
$(SDK_TOOLS)/gen_appbin_old.exe $(TARGET_OUT) v6
$(SDK_TOOLS)/gen_flashbin.exe eagle.app.v6.flash.bin eagle.app.v6.irom0text.bin 0x40000
rm -f eagle.app.v6.data.bin
rm -f eagle.app.v6.flash.bin
rm -f eagle.app.v6.irom0text.bin
rm -f eagle.app.v6.rodata.bin
rm -f eagle.app.v6.text.bin
rm -f eagle.app.sym
mv eagle.app.flash.bin $(FW_BASE)/
$(vecho) "No boot needed."
$(vecho) "Generate eagle.app.flash.bin successully in folder $(FW_BASE)."
$(vecho) "eagle.app.flash.bin-------->0x00000"
$(ESPTOOL) -p $(ESPPORT) -b $(ESPBAUD) write_flash $(flashimageoptions) 0x00000 $(FW_BASE)/eagle.app.flash.bin
flashboot: all flashinit
ifeq ($(boot), new)
$(vecho) "Flash boot_v1.3 and +"
$(ESPTOOL) -p $(ESPPORT) -b $(ESPBAUD) write_flash $(flashimageoptions) 0x00000 $(SDK_BASE)/bin/boot_v1.3\(b3\).bin
endif
ifeq ($(boot), old)
$(vecho) "Flash boot_v1.1 and +"
$(ESPTOOL) -p $(ESPPORT) -b $(ESPBAUD) write_flash $(flashimageoptions) 0x00000 $(SDK_BASE)/bin/boot_v1.1.bin
endif
ifeq ($(boot), none)
$(vecho) "No boot needed."
endif
flash: all
ifeq ($(app), 0)
$(ESPTOOL) -p $(ESPPORT) -b $(ESPBAUD) write_flash $(flashimageoptions) 0x00000 $(FW_BASE)/eagle.flash.bin 0x40000 $(FW_BASE)/eagle.irom0text.bin
else
ifeq ($(boot), none)
$(ESPTOOL) -p $(ESPPORT) -b $(ESPBAUD) write_flash $(flashimageoptions) 0x00000 $(FW_BASE)/eagle.flash.bin 0x40000 $(FW_BASE)/eagle.irom0text.bin
else
$(ESPTOOL) -p $(ESPPORT) -b $(ESPBAUD) write_flash $(flashimageoptions) $(addr) $(FW_BASE)/upgrade/$(BIN_NAME).bin
endif
endif
flashinit:
$(vecho) "Flash init data:"
$(vecho) "Clear old settings (EEP area):"
$(vecho) "clear_eep.bin-------->0x79000"
$(vecho) "Default config (Clear SDK settings):"
$(vecho) "blank.bin-------->0x7E000"
$(vecho) "esp_init_data_default.bin-------->0x7C000"
$(ESPTOOL) -p $(ESPPORT) -b $(ESPBAUD) write_flash $(flashimageoptions) 0x79000 $(SDK_BASE)/bin/clear_eep.bin 0x7c000 $(SDK_BASE)/bin/esp_init_data_default.bin 0x7e000 $(SDK_BASE)/bin/blank.bin
rebuild: clean all
clean:
$(Q) rm -f $(APP_AR)
$(Q) rm -f $(TARGET_OUT)
$(Q) rm -rf $(BUILD_DIR)
$(Q) rm -rf $(BUILD_BASE)
$(Q) rm -rf $(FW_BASE)
$(foreach bdir,$(BUILD_DIR),$(eval $(call compile-objects,$(bdir))))
Does that Makefile work for you?
Yes @beckdac. Do you have another?
No. Yours worked on one box. The repo version worked on another. Many thanks for posting yours.
Hi. Congratulations by the solution. It is really I need in my project. I am a newbie in ESP8266 development. Where I can find a Starter Tutorial? Best regards.