search

benb0jangles / FlySky-i6-Mod-

A collection of software modifications for the FlySky i6, some useful, some experiment. All use of this repository is experimental and you use at your own risk. But, progress is being made.
413 stars 132 forks source link

Firmware Version Number won't show + "Device is not connected" #102

Open slayervictor opened 6 years ago

slayervictor commented 6 years ago

Hello. I am trying to get the latest firmware update on my flysky fs-i6, but when i connect to a com port, for me thats com 1, it won't show what version of firmware im using. When i click "program" it just says "Device is not connected" although i have connected it. What do i need to do? yes i have remembered to run as a admin.

Heres a photo omg

slayervictor commented 6 years ago

no

qba667 commented 6 years ago

@slayervictor ensure that device is listed in device manager - check com port number. Or even better use console updater from here https://github.com/qba667/FlySkyI6

ivanPdmnt commented 6 years ago

@slayervictor did you manage to find the solution?? Im in the same situation... Port opens but doesnt recognise the device. thanks!

qba667 commented 6 years ago

@ivanPdmnt, use console updater, select correct COM port, check connection, monitor serial interface traffic, provide logs:)

slayervictor commented 6 years ago

@IvanPdmnt No i havent found a solution, but maybe if i figure out how to use the console updater i can show u @qba667 can you explain how to use the console updater?

slayervictor commented 6 years ago

@qba667 and which version i will need to use on the fs-i6

qba667 commented 6 years ago

@slayervictor last one - 1.7.1 or 1.7

amckee commented 5 years ago

I ran into this as well. I swapped the tx and rx wires and it was able to successfully update the firmware.

Benioup commented 4 years ago

@slayervictor did you find any solution. I know im late but any solution...? that would be great thanks alot!! :)

ivanPdmnt commented 4 years ago

Hello! yes I managed to solve the problem, but honestly I dont remember how I did it, too many months since then... i sold the radio one year ago, but it was working fine with all 10 channels. Thanks anyway!

El mié., 24 jun. 2020 a las 11:50, Benioup (notifications@github.com) escribió:

@slayervictor https://github.com/slayervictor did you find any solution. I know im late but any solution...? that would be great thanks alot!! :)

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/benb0jangles/FlySky-i6-Mod-/issues/102#issuecomment-648904650, or unsubscribe https://github.com/notifications/unsubscribe-auth/AIHKJEAL3R6O6E6ANCXF7UTRYIOEJANCNFSM4EGN2KPA .

-- Atentamente,

IVÁN PEDEMONTE AGUILAR

Mechanical Industrial Engineer Universitat Politécnica de Catalunya

Master in Mining Universidad de Chile

Benioup commented 4 years ago

@ivanPdmnt too bad :/ if you remember with any luck please contact me that would awsome!! thx :)

EvgeniyJarsky commented 3 years ago

I have the same problem, but solved the problem. It was bad contact. You mast try any times to connect flysky to computer. I did it 8 times and a did it at last time!!!

taurusturk commented 3 years ago

I wanted to upgrade from 6 channels to 10 channels. FLYSKY i6 remote does not work. does not upgrade. it didn't happen with the data cable. did not work with ardiuno, can anyone help: ((((

mahmud-hasans commented 3 years ago

@Benioup I got it working by watching a comment from RCgroups. I connected the Transmitter without turning it on. Then I attached all the cables. Only after attaching all the cables I turned on the Transmitter in Update mode. Then it worked fine.