A collection of software modifications for the FlySky i6, some useful, some experiment. All use of this repository is experimental and you use at your own risk. But, progress is being made.
FS-i6 hardware is ready to use 3-position switch instead of SwB - just one wire and 2 resistors needed, but firmware only detect two states of this switch - below 1.5V and above (checked with potentiometer between 3.3V and Gnd, firmware 10ch_Timer_MOD_i6_Programmer_V1_4). Is it possible to adapt fw, so it'll work exactly as SwC?
FS-i6 hardware is ready to use 3-position switch instead of SwB - just one wire and 2 resistors needed, but firmware only detect two states of this switch - below 1.5V and above (checked with potentiometer between 3.3V and Gnd, firmware 10ch_Timer_MOD_i6_Programmer_V1_4). Is it possible to adapt fw, so it'll work exactly as SwC?