Channel 5/6 hard coded to VRA/VRB (no custom aux channels)

benb0jangles / FlySky-i6-Mod-

A collection of software modifications for the FlySky i6, some useful, some experiment. All use of this repository is experimental and you use at your own risk. But, progress is being made.

413 stars 132 forks source link

Channel 5/6 hard coded to VRA/VRB (no custom aux channels) #67

Open spuder opened 7 years ago

spuder commented 7 years ago

I installed the 10 channel firmware and it is great.

However in simulators (specifically the DRL simulator), I can no longer set the reset quad / reset race switches to SWB and SWC like they are on a stock i6.

It seems that channel 5 and 6 are hard coded to use VRA and VRB when in student mode.

qba667 commented 7 years ago

@spudler How about trainer mode? But try version from rcgroups.

spuder commented 7 years ago

Never used trainer mode. I can only test student mode.

spuder commented 7 years ago

The readme in the stock firmware mentions that channel 5 & 6 are hard coded to VRA and VRB

https://github.com/benb0jangles/FlySky-i6-Mod-/blob/master/Firmwares/Flysky%20i6%20Original%20Firmware/ReadMe.txt

Rolling back to neither the original firmware provided in this repo, nor the original firmware on flysky's website fixes this. The controller is forever hard coded to use VRA and VRB in simulators.